BMW Engine Parts for BMW 6 Series F13 (2012+)

Fuel Pump Assembly - In-Tank Suction Device

T#:594677

Part#: 16117341301

Ships in 2 Business Days

$ 370.99

This product was last offered at the strikethrough price on
08-31-2026

$ 364.76 USD

Add to Wish List

Qty

$ 364.76 USD

Add to Wish List

Replacement Fuel Pump from Pierburg

5150 AutoSport Pro-Series Turbo Build Kit - BMW N55 Stage 2

T#:31755188

Part#: 5150-TBK-N55-100

Ships in 3 Business Days

$ 6,099.99 USD

Add to Wish List

Qty

$ 6,099.99 USD

Add to Wish List

The 5150 AutoSport Pro-Series Turbo Build Kit is made for high horsepower and turbocharged performace.

CTA Fuel Injector Tool Kit - N20, N54, N55

T#:584132

Part#: CTA7644

Ships in 5 Business Days

$ 294.23 USD

Add to Wish List

Qty

$ 294.23 USD

Add to Wish List

The CTA Fuel Injector Tool kit is designed to remove and install your fuel injectors. 130 180, 130 270, 130 320, 2249 115

Designed to service the following BMW platforms:

N20, N47, N54, N55, N57 and N63

Show More Show Less

Performance N55 Main Bearing Set

T#:26238415

Part#: 5150-HPMBS-N55

Ships in 3 Business Days

$ 549.99 USD

Add to Wish List

Qty

$ 549.99 USD

Add to Wish List

5150 High Performance Coated Main Bearing Sets are made for the demands of high performance engine builds. Treated shells and coated by Calico to reduce friction, these bearings allow your engine to generate more power and resist "spinning" under stress. These coated bearings also have thermal resistant properties that not only perform in high HP applications like forced induction or race use, but also help prevent sudden engine failure in the event of oil pressure loss. 5150 bearings have proven themselves on and off the track, lasting longer and outperforming other bearings on the market.

Show More Show Less

BMW Rod Bolt Stretch Gauge with Billet Body & Thumb Hold

T#:4309

Part#: 100-9942

In Stock at Vendor

$ 202.99 USD

Add to Wish List

Qty

$ 202.99 USD

Add to Wish List

We highly recommend using a stretch gauge when installing rod bolts and other fasteners, where it is possible to measure the length of the fastener.

Rocker Cover

We Price Match - Give Us A Call or Chat!

T#:38419084

Part#: 11127570292

In Stock

$ 350.99 USD

Add to Wish List

Qty

$ 350.99 USD

Add to Wish List

If your valve cover is cracked or warped, replace it with this Febi part to avoid leaks and prevent additional valvetrain damage. You will also need to purchase (2) 11367609963 self-tapping screws for proper valve cover installation.

Show More Show Less

THINKDIAG (include 1 Free Software)

T#:2302718

Part#: 301180767

Ships in 2 Business Days

$ 101.99

This product was last offered at the strikethrough price on
08-23-2026

$ 86.99 USD

Add to Wish List

Qty

$ 86.99 USD

Add to Wish List

ThinkDiag is prefect to use with the unique THINKCAR app. Easy and convenient, anytime and anywhere.

ARP Head Stud Kit - N63

T#:26238387

Part#: ARP-HSK-N63

Ships in 3 Business Days

Starting at $ 749.99 USD

Add to Wish List

Starting at $ 749.99 USD

Add to Wish List

Upgrade the performance of your BMW N63 engine with our ARP Head Stud Kits, specifically designed for the turbocharged V-8 N63 engine. As you increase the power output of your engine beyond its factory specifications, the head and block may start to separate, causing factory bolts to stretch and fail. Our ARP Head Studs are designed to be stronger than factory bolts, ensuring your race engine stays together even under extreme conditions. Our Custom Age 625+ kit is made from a material with a tensile strength of 260 ksi, substantially higher than the 190 ksi of the ARP 2000 head stud. It's an ideal choice for individuals who want to push the limits of their N63 builds.

Show More Show Less

URO Premium Turbocharger Coolant Supply Line - Cylinders 1-4 - F15 F1...

2X Entries Into Our F80 M3 Sweepstakes

T#:1918448

Part#: 11537578687

Ships in 1 Business Day

$ 94.99 USD

Add to Wish List

Qty

$ 94.99 USD

Add to Wish List

Kevlar Reinforced Hose Material for Superior Burst Strength Improved Heat Shielding Added to Protect from High Radiant Heat Exposure Upgraded Metal Tee Fitting vs OEM Plastic Design Precision-formed to OE turbocharger coolant line length and shape for proper appearance and function Equipped with correct end fittings for easy installation and leak-free performance Manufactured using high-quality materials to resist coolant exposure and turbo heat

Show More Show Less

VTT N5X/S55/N2X Triple Billet Cap Kit - Black - BMW N20/52/54/55 ...

2X Entries Into Our F80 M3 Sweepstakes

T#:5122279

Part#: TRIPLECAPBLK1

Ships in 10 Business Days

$ 220.99 USD

Add to Wish List

Qty

$ 220.99 USD

Add to Wish List

Save 10% by buying all 3 VTT Billet Caps together! VTT is proud to offer their billet replacement for the factory plastic Power Steering Cap, Oil Filter Housing Cap, and Oil Fill Cap. These caps do away with the weak plastic construction while adding some pop and color to your engine bay. These caps retain ALL of the factory provisions to ensure proper fitment and operation. Vargas Turbo designed these caps to complement each other, so all 3 will have the same design and color shades. These caps come in 4 colors – Red, Black, Blue, and Clear anodized.

Show More Show Less

Victor Reinz Valve Seal Repair Kit - Exhaust

T#:377137

Part#: 11340035853

Ships in 3 Business Days

$ 58.99 USD

Add to Wish List

Qty

$ 58.99 USD

Add to Wish List

Stop burning oil at start-up

Oil Filter Cap

2X Entries Into Our F80 M3 Sweepstakes

T#:45723148

Part#: 11427615389

Ships in 3 Business Days

$ 21.99 USD

Add to Wish List

Qty

$ 21.99 USD

Add to Wish List

The oil filter housing does far more than just hold the filter—it’s a vital piece that directs oil where it needs to go throughout the engine. With age, the housing and its gaskets can warp, crack, or leak, leading to oil loss, a messy engine bay, and even potential coolant contamination. Ignore it, and that small leak can turn into serious engine trouble. Replacing your oil filter housing delivers: * **Leak-free reliability** – Prevents oil and coolant seepage before it escalates. * **Proper flow** – Maintains clean, consistent oil circulation through the engine. * **Confidence restored** – No more puddles, no more guesswork—just dependable performance. Refresh the housing, stop the leaks, and keep your engine running strong without the worry of hidden damage.

Show More Show Less

Spline Lock Crank Hub Solution

2X Entries Into Our F80 M3 Sweepstakes

T#:8061334

Part#: VTT-N55-CRANKHUB

Ships in 10 Business Days

$ 818.99 USD

Add to Wish List

Qty

$ 818.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. The product comes with a 1-year unlimited mileage warranty from manufacturer defects.

Show More Show Less

Pure Turbos S63TU Stage 2 Turbo Upgrade - F10 M5, F06/12/13 M6 S63TU ...

For vehicles with a production date up to 07/2014

T#:578311

Part#: PURE-S63-0001KT

Ships in 4 Business Days

$ 6,017.99

This product was last offered at the strikethrough price on
07-13-2026

$ 5,795.00 USD

Add to Wish List

Qty

$ 5,795.00 USD

Add to Wish List

As BMW enthusiasts, we admittedly did not know how to feel when BMW moved to forced induction. We loved the naturally aspirated power that the NA straight six produced, but Pure Turbos has been able to prove time and time again what a forced induction BMW powerplant is capable of putting down. Here at Turner Motorsport, we trust Pure Turbos to meet all of your power desires - after all, there's a reason the majority of the fastest forced induction BMWs on the road are running Pure Turbos. When big power for an M5/M6 is the goal, Pure Turbos has the answer with their Stage 2 turbocharger upgrade. With supporting modifications, such as fueling, methanol injection, and tuning, 900+ wheel horsepower is achievable!

Show More Show Less

Victor Reinz Cylinder Head Bolt Set - BMW N63 S63

For vehicles with a production date up to 10/2011

T#:27672116

Part#: 11127582454

Ships in 2 Business Days

$ 55.99

This product was last offered at the strikethrough price on
05-07-2026

$ 46.99 USD

Add to Wish List

Qty

$ 46.99 USD

Add to Wish List

One time use torque-to-yield cylinder head bolts. Always replace as a set whenever cylinder head is removed and reinstalled.

Timing Cover Output Shaft Seal

T#:594929

Part#: 11147647380

Ships in 1 Business Day

$ 42.19

This product was last offered at the strikethrough price on
08-07-2026

$ 36.99 USD

Add to Wish List

Qty

$ 36.99 USD

Add to Wish List

Seals the timing case on the front of the engine

Elring Oil Pan Gasket - F10 F12 F13

2X Entries Into Our F80 M3 Sweepstakes

T#:596435

Part#: 11137843149

Ships in 2 Business Days

$ 43.21

This product was last offered at the strikethrough price on
08-26-2026

$ 38.96 USD

Add to Wish List

Qty

$ 38.96 USD

Add to Wish List

URO Oil Cooler - Multiple BMWs

2X Entries Into Our F80 M3 Sweepstakes

T#:588783

Part#: 11427525333

In Stock

$ 66.99 USD

Add to Wish List

Qty

$ 66.99 USD

Add to Wish List

Heat Exchanger - This item fits the following BMW Chassis: E70 X5,E71,E82,E83 X3,E85,E86,E89 Z4,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36 Fits BMW Engines including: N20,N26,N51,N51,N52,N52N,N54,N55

Show More Show Less

NGK - Ignition Coil - N20 N52 N54 N55 S55 S54 N62 S62 M54

We Price Match - Give Us A Call or Chat!

T#:35289800

Part#: 12138616153

In Stock

$ 59.99

This product was last offered at the strikethrough price on
05-07-2026

$ 58.99 USD

Add to Wish List

Qty

$ 58.99 USD

Add to Wish List

OEM Elring Upper Oil Pan Gasket - F06,F10,F12,F13 S63 4.4L

2X Entries Into Our F80 M3 Sweepstakes

T#:2706163

Part#: 11137843145

Ships in 2 Business Days

$ 38.99

This product was last offered at the strikethrough price on
08-26-2026

$ 34.99 USD

Add to Wish List

Qty

$ 34.99 USD

Add to Wish List

This is a direct replacement oil pan gasket for your vehicle. Oil leaks can cause a low oil level, which comes with some obvious dangers. Inexpensive to replace, yet a very vital component. Make sure your oil is staying inside your engine.

Show More Show Less

Race German Inline Fuel Pressure Adapter (1/8npt)

T#:7703242

Part#: RGIFPA

Ships in 1 Business Day

$ 23.99 USD

Add to Wish List

Qty

$ 23.99 USD

Add to Wish List

Race German has devoted themselves to providing quality products for late model BMWs that cover both street and track applications. Race German has now grown their catalog to a wide variety of models and products geared towards keeping your car looking and running nice. Finding a way to measure your fuel pressure is not always the easiest thing to do. Race German wanted to make your life just a little easier with this in-line fuel pressure adapter. This simple solution allows you to splice into your rubber fuel feed line hose and attach a 1/8NPT pressure sender. This would be great to run a fuel pressure gauge, or give you a way to temporarily test your pressure for troubleshooting issues, either way you can't go wrong. *Does not include pressure sender.

Show More Show Less

Piston Ring Comp 2-1/8" to 5"

T#:2242222

Part#: W80572

Ships in 1 Business Day

$ 21.99 USD

Add to Wish List

Qty

$ 21.99 USD

Add to Wish List

Use to install pistons on most passenger cars and truck engines

URO Fuel Hose - F01, F02, F07 F10, F12, F13 - N63

2X Entries Into Our F80 M3 Sweepstakes

T#:53644195

Part#: URO-020342

Ships in 1 Business Day

$ 69.99 USD

Add to Wish List

Qty

$ 69.99 USD

Add to Wish List

OE Level Replacement Fuel Hose for High Pressure Pump

MTX-D: Ethanol Content % And Fuel Temperature Gauge

T#:22558994

Part#: INN3904

In Stock at Vendor

14% off MSRP $ 313.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 269.00 USD

Add to Wish List

Qty

14% off MSRP

$ 313.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 269.00 USD

Add to Wish List

Introducing the Innovate Motorsports MTX Digital Series "Dual Function" Gauges – now available! These 2 1/16" (52mm) gauges come with interchangeable faceplates and bezels, locking connectors for simplified installation, and MTS serial connections for seamless integration with other Innovate devices for data logging.

DISPLAY RANGE

Ethanol Content %: 0-100%
Temperature: -40-257 °F (-40-125°C)

KEY FEATURES

Ethanol Content
Error reporting for ethanol content sensor (Digital Display)
Fuel Temperature
Customizable exterior LED display
Programmable exterior LED color options
Selectable unit of measure in °F or °C
Programmable fuel temperature warning (outer LED)
2-Configurable analog outputs
Ethanol Content: 0v = 0%, 5v = 100%
Fuel Temperature: 0v = -40 °F, 5v = 257 °F (-40-125°C)

MTX-D: Ethanol Content Percentage & Fuel Temp Gauge Kit includes Gauge (Black Faceplate, Black Bezel), Silver Bezel & White Faceplate, Harness, Program Cable (Serial), Ethanol Content Sensor, Quick Start Installation Guide.

Please note that this is a universal fitment gauge, and installation may vary depending on the vehicle.

Show More Show Less

Engine Oil Thermostat- E90 335i, E89 Z4 35i, E93 335i/335is ...

2X Entries Into Our F80 M3 Sweepstakes

T#:33446276

Part#: 11427573212

Ships in 1 Business Day

$ 143.99 USD

Add to Wish List

Qty

$ 143.99 USD

Add to Wish List

An engine oil thermostat allows oil to bypassing the cooler until the oil has reached its minimum operating temperature.

OEM Rein Oil Filter Cap - BMW N20 N52 N54 N55

2X Entries Into Our F80 M3 Sweepstakes

T#:46134810

Part#: CPL0054

In Stock at Vendor

$ 28.99 USD

Add to Wish List

Qty

$ 28.99 USD

Add to Wish List

Over time, has the cap for your oil filter housing become harder to remove? Using the wrong tool can round the top of the cap, making removal harder each time. Replace your old cap and seal to ensure your engine is leak-free. We recommend pairing this with the Schwaben Oil Filter Cap Tool (T#371924) to make installation and removal easier.

Show More Show Less

AGA Tools N63 Updated Rear Engine Cover - BMW N63 (2008-2019) ...

T#:26404835

Part#: AGA-N63-6061-URC

Ships in 7 Business Days

$ 449.99 USD

Add to Wish List

Qty

$ 449.99 USD

Add to Wish List

The BMW N63 rear cover is a metal plate that covers the rear of the BMW N63 V8 engine. It helps to seal the engine and prevent oil leaks. Over time, the original sealing gasket becomes brittle and does not seal, causing leaks between the engine and transmission bell housing. This repair can be very expensive and is usually misdiagnosed for a rear main seal. The AGA Updated N63 Rear Cover is an inexpensive alternative, made of 6061 billet aluminum. This kit includes the rear cover, viton o-ring, alcohol wipe, scotch-brite pad and o-ring grease. BMW Part # 11142446298 & 11148483799 BMW Service Bulletin (SIB) 11 09 16

Show More Show Less

BMW Valve Cover Gasket

2X Entries Into Our F80 M3 Sweepstakes

T#:15412491

Part#: 11128636546

Ships in 1 Business Day

$ 54.99

This product was last offered at the strikethrough price on
04-26-2026

$ 43.99 USD

Add to Wish List

Qty

$ 43.99 USD

Add to Wish List

Keeping the oil inside your engine is extremely important to performance. Between oil change intervals, your oil can dip to dangerous levels if there is a leak you may not be aware of. The valve cover is an extremely common place for this to happen. Years of exposure to extreme temperature change degrades the gaskets and causes failure. Replace yours to keep your engine oil in your vehicle.

Show More Show Less

BMW N55 S55 Ferrea High Performance Valve Kit

T#:23416508

Part#: FER-HPVK-S55-T-3

Ships in 3 Business Days

$ 929.99 USD

Add to Wish List

Qty

$ 929.99 USD

Add to Wish List

Increase the power output of your N55/S55 engine with the high-performance Ferrea valve kit. Renowned as the industry's most reliable extreme-duty valves, they're meticulously crafted from aerospace-grade alloys, employing an exclusive two-step slow forging process for optimal grain flow and material structure integrity. A 48-hour heat treatment and stress-relieving process enhance molecular integrity. The valves feature avionics-quality hard chrome and a specially applied hard tip. Standard size: 32mm intake / 28mm exhaust, with a triple groove valve design. Compatible with factory valve locks ("Valve Keepers"), the kit includes 12x Intake Valves and 12x Exhaust Valves for a comprehensive engine upgrade!

Show More Show Less

M54/S54/N52/N54/N55 IP High Performance Ignition Coil Set

T#:1637696

Part#: IP-A122609

Ships in 5 Business Days

$ 1,055.00 USD

Add to Wish List

Qty

$ 1,055.00 USD

Add to Wish List

Ignition Projects is a Southern California based company that specializes in innovative ignitions products. Their mission is to develop stronger ignition systems in order to optimize engine performance and improve emmissions/consumption. All of their products are developed and manufactured here in Tustin, CA, right here in the US!

Show More Show Less

Nostrum Stage 2 DI Injectors - S55/N55

T#:9609825

Part#: H703-1257

Special Order: No Guaranteed ETA

$ 1,799.00 USD

Add to Wish List

Qty

$ 1,799.00 USD

Add to Wish List

The Stage 2 Injectors from Nostrum performance are an absolute must-have for those building big power N55 or S55 vehicles. While there are other injection methods out there - this is the OE upgrade we've all been looking for. These upgraded injectors are a seamless integration and provide the ability to deliver 55% more fuel than stock injectors.

Show More Show Less

BMW N54 N55 Oil Cooler Valve - Red Burger Motorsport Sport (4/2007+) ...

T#:588633

Part#: OILVALVE-RED

In Stock

$ 59.00 USD

Add to Wish List

Qty

$ 59.00 USD

Add to Wish List

This simple engine oil cooler valve from Burger Motorsports increases flow to your fender mounted engine oil/air heat exchanger resulting in lower engine oil temperatures and more consistent performance during heavy throttle. Less restrictive than the spring-loaded units. Installs in minutes and is fully reversible. CNC machined for a precise fit and anodized for protection. Made in the USA. Requires BMW's external sport engine oil cooler which is standard on most 2008+ models, optional on 2007 E9x models. FEATURES AND BENEFITS Easily lower engine oil temperature Stock oil cooler will work more efficient More consistent performance CNC Machined for a perfect fit Made in USA

Show More Show Less

DeatschWerks DW400 In-Tank Fuel Pump W/ Universal Set Up Kit ...

T#:5389791

Part#: 9-401-1001

In Stock at Vendor

$ 239.00 USD

Add to Wish List

Qty

$ 239.00 USD

Add to Wish List

The DW400 surpasses the 400LPH benchmark by delivering an industry leading in-tank flow of 415LPH at 40psi. Even more importantly, the DW400 delivers 31% more flow than its nearest competitor, the Walbro 450 "e85", at pressures between 70 and 100 psi. The DW400 has a 46mm diameter width and is compatible with pump gas, e85, and race fuels. The pump is also compatible with pulse width modulated pump drivers. The pump ships with a universal fitment kit which includes fuel hose, clamps, electrical harness, and filter. As with all DW products, the pump is warrantied for 3-yrs to the original purchaser.

Show More Show Less

Pure Turbos N55 Stage 2 Turbo Upgrade - BMW N55 3.0L w/ EWG

For vehicles with electronic waste gate (EWG)

T#:578281

Part#: PURE-N55-0004KT

Ships on Nov 3, 2026

$ 3,114.99

This product was last offered at the strikethrough price on
07-13-2026

$ 3,000.00 USD

Add to Wish List

Qty

$ 3,000.00 USD

Add to Wish List

As BMW enthusiasts, we admittedly did not know how to feel when BMW moved to forced induction. We loved the naturally aspirated power that the NA straight six produced, but Pure Turbos has been able to prove time and time again what a forced induction BMW powerplant is capable of putting down. Here at Turner Motorsport, we trust Pure Turbos to meet all of your power desires - after all, there's a reason the majority of the fastest forced induction BMWs on the road are running Pure Turbos. Looking for massive gains out of your N55 powered BMW? This Stage 2 turbo upgrade kit from Pure Turbos can allow you to achieve over 500whp reliably with supporting modifications! This price includes a $500 core charge that is refunded once we receive your rebuildable core. This upgrade kit features: Upgraded high flow turbine wheel Upgraded point-milled billet compressor wheel Dual oil seals on both compressor and turbine Large diameter 360 thrust upgrade Extensive turbofold modifications and machining Direct fit, as OEM, as these utilize OEM housings Featuring a limited 1 year warranty. For vehicles with electronic waste gate (EWG)

Show More Show Less

Deluxe Compression Tester

T#:585065

Part#: OTC5605

Ships in 6 Business Days

$ 349.99 USD

Add to Wish List

Qty

$ 349.99 USD

Add to Wish List

The only way to check compression is with a compression tester like this one.

TechSelect Turbocharger Hose Kit

2X Entries Into Our F80 M3 Sweepstakes

T#:14122739

Part#: TRK0013

In Stock

$ 590.99

This product was last offered at the strikethrough price on
05-07-2026

$ 368.99 USD

Add to Wish List

Qty

$ 368.99 USD

Add to Wish List

TechSelect Turbo Kits include all hoses, hardware and gaskets needed TechSelect Turbo Kit hoses are direct replacements to the OE, and include brackets, hardware and sealing components This hardware is designed and manufactured to withstand the rigorous operating environments of turbocharger systems Gaskets included are direct replacements to the OE ensuring optimal performance

Show More Show Less

Mishimoto 19 Row Universal Oil Cooler

For custom applications only. Not a direct bolt on.

T#:378414

Part#: MMOCUL

In Stock at Vendor

$ 536.99 USD

Add to Wish List

Qty

$ 536.99 USD

Add to Wish List

Even under optimum driving conditions increased oil temperatures will cause a drop in pressure and will decrease the ability for your engine to be properly lubricated. With this new oil cooler, you can keep your oil temperatures down for optimum driving conditions. The kit includes four-feet of stainless braided line, adapter fittings, and oil filter sandwich adapter. Rows: 19 Overall Dimensions: 13" x 5.5" x 2" Core Dimensions: 11.25" x 5.5" x 2" Braided Hoses: 4ft .75 inch & 4ft 9 inch Braided Hose Fittings: -10AN Sandwich Plate Fittings: -10AN WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

aFe Pro GUARD D2 Oil Filter 4 Pack - N54/55 BMW Engine

T#:557623

Part#: 44-LF029-MB

Ships in 3 Business Days

$ 54.00 USD

Add to Wish List

Qty

$ 54.00 USD

Add to Wish List

Made from a synthetic media that allows maximum filtration with minimal flow restriction to satisfy modern oil-hungry engines such as the N54 and N55.

Pro-GUARD D2 Oil Filters are the next generation in oil filter technology. Pro-GUARD D2 Oil Filters deliver increased flow and efficiency that are demanded from performance gas applications. This cartridge style filter comes with a built-in seal for a hassle free installation.

Show More Show Less

CP Forged Piston Set - N63 - Pro-Xtreme 9.5:1

T#:26238409

Part#: CP-FPS-N63-XT-HD

Ships in 3 Business Days

$ 2,464.99 USD

Add to Wish List

Qty

$ 2,464.99 USD

Add to Wish List

The 5150 AutoSport Pro-Xtreme Forged Pistons, made by CP-Carrillo, are designed to handle extreme horsepower and high RPM applications for BMW N63 engines. Constructed from high-strength, aircraft-grade steel, these pistons are engineered to withstand the forces generated by high-powered engines. The Pro-Xtreme Piston design is specifically engineered to handle up to 2000 horsepower, making these pistons suitable for high-performance turbo/drag racing or street/strip applications. They are also designed to handle high engine speeds of up to 9500 RPM, which is necessary for achieving maximum power output. Each piston is precisely fabricated to meet the demands of high-performance engines using advanced manufacturing techniques such as computer-aided design (CAD) and finite element analysis (FEA). The Pro-Xtreme Pistons are designed to be durable, reliable, and capable of handling the extreme stresses and forces generated by high-horsepower and high-rpm engines. Includes: - Pistons - HD Wrist Pins - PVD Rings - Pins - Locks - Spec Sheet

Show More Show Less

Autel Autolink AL329

T#:2914116

Part#: AL329

Ships in 1 Business Day

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

OBDII Code Reader

Blue Thermostat Caps (pair)

T#:54139632

Part#: BMS-TCP-BLU

Ships in 1 Business Day

$ 29.00 USD

Add to Wish List

Qty

$ 29.00 USD

Add to Wish List

Vacuum Gauge and Fuel Pump Tester

T#:5498468

Part#: 20300

Ships in 1 Business Day

$ 52.99

This product was last offered at the strikethrough price on
05-07-2026

$ 50.99 USD

Add to Wish List

Qty

$ 50.99 USD

Add to Wish List

A must have

Rein - Return Hose

2X Entries Into Our F80 M3 Sweepstakes

T#:17771593

Part#: 11537615492

Ships in 2 Business Days

$ 45.99 USD

Add to Wish List

Qty

$ 45.99 USD

Add to Wish List

Replace leaking or faulty hoses with Rein premium hoses to restore your vehicle to safe and optimal performance levels.

Mishimoto Performance Engine Oil Cooler - F10/90 M5, F06/12/13 M6, G1...

T#:6258386

Part#: MMOC-F10-12SL

In Stock at Vendor

$ 887.99 USD

Add to Wish List

Qty

$ 887.99 USD

Add to Wish List

The BMW M5 power and handling statistics are completely mind-blowing for a car tipping the scales at well over two tons. The S63 twin-turbo V8 is underrated from the factory and responds well to tuning and bolt on modifications. Calling it the ultimate super sedan would not do this car justice, it’s just that good. But every amazing automobile must have an Achilles’ heel, right? Some investigation into this model told us that enthusiasts were seeing elevated oil temperatures during track driving conditions. Our team set out to create a replacement, high-performance oil cooler that could handle the rigors of extreme driving conditions and the abuse of daily commuting. The Mishimoto S63 M5/M6 oil cooler features extremely precise CNC-machined billet-aluminum end tanks which are professionally TIG-welded to our robust bar-and-plate core. Our strategically designed 55mm-thick core provides a massive 24% increase in core volume, and a 40% increase in external fin surface area. This added surface area promotes greater heat transfer, which directly impacts internal fluid temperatures. Our performance oil cooler is a complete bolt-on solution that includes everything needed for an easy installation such as hardware and replacement O-rings for the oil lines. Our heat exchanger is finished in a durable silver powder coat, providing both corrosion resistance and improved aesthetics. Whether your M5 sees frequent track time or just the occasional back-road jaunt, upgrading the oil cooler is a great way to extend the life of your S63 and ensure maximum engine output when you need it most. As with all our BMW products, this oil cooler includes our signature Mishimoto Lifetime Warranty. Direct fit for 2012+ BMW M5/M6 models CNC-machined billet aluminum end tanks provide improved durability over stock stamped tanks Robust bar-and-plate core resists damage from road debris and provides optimal cooling efficiency 24% increase in core volume over stock for improved cooling capacity 40% increase in external fin area provides improved heat transfer during extreme driving conditions Precision CNC-machined inlet and outlet prevent leaks Includes new OEM-quality oil line O-rings for easy installation Durable silver powder coated finish prevents corrosion Mishimoto Lifetime Warranty Purchase Includes: (1) Performance Oil Cooler (4) Mounting Bracket Grommets (2) Oil Line Connection M8 X 1.25 Bolts (2) Oil Line O-rings Mishimoto Lifetime Warranty WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov. The Mishimoto S63 M5/M6 oil cooler features extremely precise CNC-machined billet-aluminum end tanks which are professionally TIG-welded to our robust bar-and-plate core. Our strategically designed 55mm-thick core provides a massive 24% increase in core volume, and a 40% increase in external fin surface area. This added surface area promotes greater heat transfer, which directly impacts internal fluid temperatures. Our performance oil cooler is a complete bolt-on solution that includes everything needed for an easy installation such as hardware and replacement O-rings for the oil lines. Our heat exchanger is finished in a durable silver powder coat, providing both corrosion resistance and improved aesthetics. Whether your M5 sees frequent track time or just the occasional back-road jaunt, upgrading the oil cooler is a great way to extend the life of your S63 and ensure maximum engine output when you need it most. As with all our BMW products, this oil cooler includes our signature Mishimoto Lifetime Warranty. Direct fit for 2012+ BMW M5/M6 models CNC-machined billet aluminum end tanks provide improved durability over stock stamped tanks Robust bar-and-plate core resists damage from road debris and provides optimal cooling efficiency 24% increase in core volume over stock for improved cooling capacity 40% increase in external fin area provides improved heat transfer during extreme driving conditions Precision CNC-machined inlet and outlet prevent leaks Includes new OEM-quality oil line O-rings for easy installation Durable silver powder coated finish prevents corrosion Mishimoto Lifetime Warranty Purchase Includes: (1) Performance Oil Cooler (4) Mounting Bracket Grommets (2) Oil Line Connection M8 X 1.25 Bolts (2) Oil Line O-rings Mishimoto Lifetime Warranty

Show More Show Less