BMW Suspension Parts for BMW X Series F15 (2014+)

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you.

BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.

The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below.

Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically.

The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability.

All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection.

Specs and Features:

• 14k Front & 12k Rear Spring Rate
• Linear front & S-Barrel rear springs
• Valved specifically to spring style and rate
• Aluminum and Rubber Front Mounts
• Aluminum and Rubber Rear Mounts
• Black Powder Coated Components
• All OE style brackets and mounting for perfect fit
• 30 Levels of Simultaneous Compression and Rebound Dampening
• 2 inch minimum and 3+ Inches of total potential drop
• Great for Track, Street, and any other conditions

Looking for a more aggressive stance and tighter handling? H&R Sport springs offer the perfect balance between performance minded driving and everyday comfort. Designed and tested in-house, these springs have been meticulously tuned to maximize the potential of your cars OE suspension without sacrificing ride quality or safety. 

These springs will lower the vehicle approx. 1.5" in the front and 1.6" in the rear. This gives a more aggressive stance and lowers the center of gravity for drastically reduced body roll. While still being a progressive spring, they offer the comfort and control of a stock coil spring with a slightly higher rate. This increased spring rate helps the vehicle respond quicker to steering inputs and gives the chassis a more "athletic" feel. 

Although they will function well on stock dampers, we recommend swapping for a set of Bilstien B8 as they are made to be used with lowering springs. Stock struts have a tendancy to bottom out when lowered with srings which can cause the suspension to actually ride on the rubber bump stop when taking corners. Using a set of struts made to work with lower springs will allow you to maximize the potential of this upgrade and will completely transform the handling characterisitcs of your vehicle 

H&R Sport springs are engineered to bring you the highest possible quality. These springs are perfect for BMWs that are daily driven, or see occasional track use. If you seek better handling and a sportier appearance, these are the springs you need. 

This part fits the following BMWs:
2014+ F15 3rd gen X5 35i 

Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This in turn reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.

Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

Sway bar end links connect the swaybar to the rest of the suspension, preventing body roll and keeping everything in line in tight turns. This exposes these links to a high amount of stress and pressure, often leading to split bushings and sloppy body control and knocking noises. OEM Lemförder sway bar links are the perfect option to restore body control and eliminate knocking noises.

Lemforder is a supplier of parts directly to BMW and other major automotive manufacturers. In order to save on the cost of parts, we are able to provide you these parts directly from Lemforder at a much lower cost than if bought directly from BMW. These parts have the same high quality and reliability, just without the BMW logos.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMW Chassis:
2012 - 2013 E70 BMW X5 xDrive35d xDrive35i xDrive50i
2007 - 2011 E70 BMW X5 3.0sd 3.0si 4.8i
2008 - 2014 E71 BMW X6 xDrive35i xDrive50i
2008 - 2014 E72 BMW ActiveHybrid Hybrid X6
2015+ F16 BMW X6 sDrive35i xDrive35i xDrive50i
2014+ F15 BMW X5 35i 35iX  40eX 50iX

Fine-tuning your coilover damping shouldn’t mean stripping out your rear seats or interior panels. On many applications, rear shock adjusters are hidden behind carpet, trim, or seatbacks, making quick adjustments a hassle.

The ECS Rear Damping Extension Kit solves that problem with a clean and functional solution. These flexible extensions relocate the adjustment knobs to an easily accessible point above the rear shock towers, letting you dial in your suspension from inside the cabin, no disassembly required.

Installation is straightforward: simply drill a small access hole in your interior trim and route the extension cables through. The adjustment knobs can be removed to allow the line to pass through smaller openings, minimizing cutting. For proper installation, be sure to fully loosen the set screw, insert the cable, then securely tighten it using the provided Allen key.

Kit Includes:

(2) Rear damping adjuster extension cables

Installation hardware and Allen key

A smart upgrade for track cars, daily drivers, or anyone who values easy access to suspension tuning, without compromising interior fit and finish.

Position: Front, left or right
Setting: Performance, for stock suspensions

Front Bilstein B6 Performance shock. Performance shocks are for cars with the standard, factory suspension. They are typically about 20% firmer than the original shock, improving body roll, brake dive, and overall handling. Includes top nut. Price is per shock.

This Bilstein B6 Performance Front shock fits the following BMWs:

2013+ F15 BMW X5

2015+ F16 BMW X6 s/x35i

• Affordable alternative to electric valves
• Easy height adjustment for improved ride control
• Versatile 1/8" FNPT threads
• Reliable performance for BMW suspension systems

Bilstein strut/shock package for stock springs. Set includes 2 front Bilstein B6 Performance shocks and 2 rear Bilstein B6 Performance shocks. Includes top nuts and rear lower shock washers. The stock rear dust boots are re-used. The Bilstein B6 Performance Shock is designed for use with stock springs. These shocks provide improved handling and stability without sacrificing ride comfort.

This Bilstein B6 Performance shock package fits the following BMWs:

2013+ F15 BMW X5 (non-M)

Exposure to the elements and stress/pressure can lead to failing and splitting subframe bushings. Ensure your subframe is mounted perfectly steady to prevent vibrations, knocks, suspension issues, and potential damage to the body of the vehicle or suspension components. OEM Lemforder is the perfect replacement to make sure that everything is mounted properly.

OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Looking for a more aggressive stance and tighter handling? H&R Sport springs offer the perfect balance between performance minded driving and everyday comfort. Designed and tested in-house, these springs have been meticulously tuned to maximize the potential of your cars OE suspension without sacrificing ride quality or safety. 

These springs will lower the vehicle approx. 1.5" in the front and 1.6" in the rear. This gives a more aggressive stance and lowers the center of gravity for drastically reduced body roll. While still being a progressive spring, they offer the comfort and control of a stock coil spring with a slightly higher rate. This increased spring rate helps the vehicle respond quicker to steering inputs and gives the chassis a more "athletic" feel. 

Although they will function well on stock dampers, we recommend swapping for a set of Bilstien B8 as they are made to be used with lowering springs. Stock struts have a tendancy to bottom out when lowered with srings which can cause the suspension to actually ride on the rubber bump stop when taking corners. Using a set of struts made to work with lower springs will allow you to maximize the potential of this upgrade and will completely transform the handling characterisitcs of your vehicle 

H&R Sport springs are engineered to bring you the highest possible quality. These springs are perfect for BMWs that are daily driven, or see occasional track use. If you seek better handling and a sportier appearance, these are the springs you need. 

This part fits the following BMWs:
2014+ F15 3rd gen X5 50iX X5 50iX 4.0 X5 50iX 4.4 X5