BMW Intake Parts for BMW X Series F15 (2014+)

Clear BMW chassis

Please ensure your correct model is selected

One thing drivers and cars have in common is the need for air. Induction systems provide a third of the critical necessities for engines to run, so giving your BMW the best way to breathe is paramount in engine performance. If you need to replace your filter, recharge your reusable pod filter, or upgrade your intake, turbos, or intercooler parts, everything can be found below. We have OEM replacements as well as aftermarket performance upgrades to keep your BMW pristine, powerful, and functioning at peak efficiency.

Sub-Categories

Sort By:
Turner Motorsport Upgraded Silicone Upper Air Intake Pipe (Turbo Inlet to OE Airbox) - N20
Turner Motorsport Upgraded Silicone Upper Air Intake Pipe (Turbo Inle...
10X Entries For Our Spin To Win Sweepstakes!
Turner Motorsport - Corporate Logo
T#:591418
Part#: 026510TMS11KT
In Stock
Sale - Save 15% $ 179.99
$ 152.99 USD
Free Shipping
Add to Wish List
Sale - Save 15% $ 179.99
$ 152.99 USD
Free Shipping
Add to Wish List
Constructed of 5-Ply reinforced silicone for improved durability. ​Designed with a smooth contour for unobstructed flow compared to the OE molded plastic. Increase turbo response, increase airflow, and reduce turbo lag.
Show More Show Less
Turner Motorsport Upgraded Silicone Lower Air Intake Pipe (Turbo Inlet) - N20
Turner Motorsport Upgraded Silicone Lower Air Intake Pipe (Turbo Inle...
10X Entries For Our Spin To Win Sweepstakes!
Turner Motorsport - Corporate Logo
T#:591415
Part#: 026510TMS10KT
In Stock
$ 230.99 USD
Free Shipping
Add to Wish List
$ 230.99 USD
Free Shipping
Add to Wish List
Designed with a smooth contour for unobstructed flow compared to the OE molded plastic. This provides increased turbo response, increased airflow, & less turbo lag. Constructed of 5-Ply reinforced silicone for improved durability. Pair with our Turner upper intake pipe for even more intake noises!
Show More Show Less
Replacement N55 Performance Filter, No Hardware
Replacement N55 Performance Filter, No Hardware
Burger Motorsports - Corporate Logo
T#:3586313
Part#: REPLACEMENT-N55F
In Stock
$ 70.00 USD
Free Shipping
Add to Wish List
$ 70.00 USD
Free Shipping
Add to Wish List

Replacement N55 Performance Filter from Burger Motorsport

Enhance your BMW's performance with the Replacement N55 Performance Filter from Burger Motorsport. Specifically designed for N55 engines, this filter optimizes airflow, leading to increased horsepower and torque. Enjoy improved throttle response and fuel efficiency, all while protecting your engine from harmful contaminants.

Key Features:

  • Designed for N55 engines
  • Optimizes airflow for increased power
  • Improves throttle response and fuel efficiency
  • Protects engine from contaminants
Show More Show Less
Performance Intake System
Performance Intake System
Burger Motorsports - Corporate Logo
T#:20979733
Part#: F10-N55-INT
In Stock
Starting at $ 219.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Starting at $ 219.00 USD
Free Shipping on orders $49 and up
Add to Wish List
BMW N54 Port Injection Intake Manifold With 750cc Injectors And Fuel Line Kit - Phoenix Racing
BMW N54 Port Injection Intake Manifold With 750cc Injectors And Fuel ...
Burger Motorsports - Corporate Logo
T#:21933055
Part#: N54PIIMINJECT
In Stock
$ 988.00 USD
Add to Wish List
$ 988.00 USD
Add to Wish List

BMW N54 Port Injection Intake Manifold With 750cc Injectors And Fuel Line Kit - Phoenix Racing is a high-performance upgrade engineered to replace the stock plastic intake manifold on BMW N54 engines. Constructed from durable, lightweight aluminum, this manifold increases airflow and strength, delivering reliable performance for both street and track applications. Integrated with top-mount port injection bungs, this manifold ensures optimal fuel delivery and spray patterns for maximum efficiency. The Phoenix Racing kit includes calibrated 750cc injectors and a plug-and-play fuel line, making it ideal for drivers aiming for high horsepower and seamless installation. Available through Turner Motorsport.

  • Replaces the factory plastic manifold with high-strength aluminum for increased durability and performance
  • Supports increased airflow to enhance engine power and efficiency
  • Integrated top-mount port injection bungs optimize fuel injector spray and delivery
  • Includes calibrated 750cc injectors and plug-and-play fuel line for a complete port injection solution
  • Multiple expansion vacuum ports support blow-off valves, boost gauges, Hobb’s switches, and more
  • High-quality, high-temperature o-rings provide lasting durability and reliability
  • Exclusively available through Turner Motorsport, ensuring trusted quality and service
Show More Show Less
Replacement N55 Performance Filter - Red (No Hardware)
Replacement N55 Performance Filter - Red (No Hardware)
Burger Motorsports - Corporate Logo
T#:38890883
Part#: BMSREPAFNFFR
In Stock
New Item
$ 70.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 70.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Enhance your BMW's performance with the Replacement N55 Performance Filter from Burger Motorsport. Specifically designed for N55 engines, this filter optimizes airflow, leading to increased horsepower and torque. Enjoy improved throttle response and fuel efficiency, all while protecting your engine from harmful contaminants. Key Features: Designed for N55 engines Optimizes airflow for increased power Improves throttle response and fuel efficiency Protects engine from contaminants
Show More Show Less
BMS Billet Water/Methanol Injection Tank Cap With Safety Check Valve
BMS Billet Water/Methanol Injection Tank Cap With Safety Check Valve ...
Burger Motorsports - Corporate Logo
T#:20815185
Part#: BMSWMITC
Ships in 3 Business Days
$ 59.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 59.00 USD
Free Shipping on orders $49 and up
Add to Wish List
The Burger Motorsports custom billet Water/Methanol Injection (WMI) cap includes an integrated heavy-duty check valve to let much-needed air in and prevent dangerous WMI vapor/fumes and liquid from getting out! Each cap is CNC machined in the USA from a solid block of billet aluminum, engraved with the BMS logo, and anodized blue for protection. Check valve piston must be lightly lubricated if tank shows signs of vacuum. One drop of penetrating oil or motor oil in the top will keep the check valve operational. Features and Benefits Integrated heavy-duty check valve lets air in but not out Specifically designed to prevent evaporation Keeps vapors inside the tank Made from a solid block of billet aluminum Blue anodizing for corrosion protection Exaggerated grips for easy removal Integrated heavy-duty o-ring Made in the USA
Show More Show Less
2 Gallon Low Profile Universal Methanol Tank
2 Gallon Low Profile Universal Methanol Tank
Burger Motorsports - Corporate Logo
T#:20946755
Part#: 2G-ULPMT
Ships on Jul 15, 2025
Starting at $ 179.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Starting at $ 179.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Integrated pump mount for a super clean install. This tank allows the pump (sold separately) to mount to the bottom of the tank making for a clean and fast installation. It’s universal and will fit a wide variety of trunk applications. The larger capacity means more time between fill ups. Offered in black for a stealth appearance and in clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Compatible with BMS DDP5800 pumps, ES4714512 or ES4714513 Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Pump mounts directly to the tank Compatible with all DDP 5800 pumps Super low profile design Available in clear for visually checking fluid levels Available in black for a stealth appearance Includes 2-way vented black plastic cap 4 mounting holes in the feet of the tank Includes a compression pump feed fitting, 2 90 degree push fittings, 9" of methanol line and pump mounting hardware. Made in the USA Tank dimensions: L 15.5" x W 8" x H 8.25"
Show More Show Less
1.25 Gallon Heavy-Duty Universal Methanol Tank
1.25 Gallon Heavy-Duty Universal Methanol Tank
Burger Motorsports - Corporate Logo
T#:20946761
Part#: 1.25G-UMT-CL
Ships on Jul 15, 2025
$ 69.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 69.00 USD
Free Shipping on orders $49 and up
Add to Wish List
This tank is thicker and stronger than BMS' basic 1-gallon WMI tank. This tank features an easy fill filler nozzle, an anti-starvation reservoir with a pre-threaded bung for the included 90º compression pump feed fitting, a spill-catcher reservoir around the filler cap, a 2-way vented black plastic cap, and is translucent to allow visually checking the fluid level. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 ​Features & Benefits 1.25 Gallon Tank (4.73 Liters) Anti-Starvation Reservoir Easy Fill filler Nozzle Spill-Catcher Reservoir around the filler cap Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a 90º compression pump feed fitting Tank dimensions: L 11" x W 4.5 x H 9"
Show More Show Less
BMS JB4 Port Injection Controller - F/G Chassis
BMS JB4 Port Injection Controller - F/G Chassis
Burger Motorsports - Corporate Logo
T#:21012590
Part#: F-G-PORTINJCONMO
In Stock
$ 349.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 349.00 USD
Free Shipping on orders $49 and up
Add to Wish List
The Burger Motorsports JB4 Port Injection Controller attaches to the JB4 allowing it to directly control both traditional port injection kits and WMI port injection kits. The JB4 port injection controller is a fully integrated solution allowing enhanced port injection mapping and safety. For example the JB4 port injection controller: 1) Uses low fuel pressure in conjunction with boost pressure to evaluate injection pressure and adjust PI IPW dynamically as required to maintain consistent flow volume. This becomes particularly important in applications that are at the edge of their low fuel pressure supply. As low pressure drops or oscillates port injection IPW must be dynamically adjusted to avoid run lean conditions. 2) Monitors pedal input, clutch input, gear, throttle position, etc, allowing more advanced mapping and instant cut of PI when letting off the gas or when traction control kicks in to avoid backfires. 3) Monitors AFR in both banks and can cut PI flow in the event a misfire event is detected preventing a potentially lean condition. 4) Monitors current through the injectors and sends a signal back to the JB4 altering it of various problems including a clogged or disconnected injector, blown electrical fuse, loose ground, etc. 5) Monitors fuel trims in each bank and failsafe's in the event of a mismatch of more than 15% indicating a potential boost single cylinder boost leak or injector flow issue. 6) Allows easy user adjustment of overall fuel volume using linear "Fuel Bias 0-100" values by RPM, greatly reducing the typical mapping complications when making manual tuning changes. 7) Integrates into the JB4 multi-map system which produces on-the-fly PI mapping changes when you change maps when boost is reduced in lower gears, or during anti-lag engagement. 8) When equipped with a JB4 integrated flex fuel sensor or JB4 virtual flex fuel sensor can automatically adjust port injection volume based on the E85 mixture allowing for easy mixture changes. 9) Enhanced mapping logic such as tip in supplement to boost port injection during sudden transitions like spool up or gear changes where the high-pressure pump tends to have problems keeping up. 10) Does not require a separate interface and cable for mapping and tuning port injection. It's all done right through the JB4 interface and logs greatly simplifying the process. 11) Includes an extra output to run your second fuel pump OR WMI PUMP (for port injection meth), eliminating the need for an extra Hobbs switch.
Show More Show Less
Burger Motorsport JB4-Compatible Water/Methanol Injection System - N20 N54/55 S55 S63 B46/48 B58
Burger Motorsport JB4-Compatible Water/Methanol Injection System - N2...
Burger Motorsports - Corporate Logo
T#:558163
Part#: BMS-WMI
In Stock
Starting at $ 226.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Starting at $ 226.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Looking to make loads of power on pump gas? Enter: water/methanol injection. Regardless if you're tuned for conventional pump gas, E85, or race fuel, use of a properly configured and integrated water/meth system will reduce temperatures, allowing you to make more power than on just conventional fuel alone. Select your engine-specific nozzles (which are standard 1/8" NPT and install in most aftermarket chargepipes), your tank to mount in the trunk, upgraded steel braided lines if you so choose, and some boost juice and you just need a management solution! Optionally, add a BMS FSB for JB4 integration!
Show More Show Less
BMS DDP5800 Water/Methanol Injection Pump
BMS DDP5800 Water/Methanol Injection Pump
Burger Motorsports - Corporate Logo
T#:20815186
Part#: BMSDDP5800
In Stock
Starting at $ 120.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Starting at $ 120.00 USD
Free Shipping on orders $49 and up
Add to Wish List
The Burger Motorsports DDP 5800 water methanol alcohol Injection pump is a heavy-duty pump used in all of our BMS Water Injection kits. 200 psi bypass for smooth and high pressure and 1.3 GPM open flow. Made in the USA. Available with built-in quick connect fittings for 1/4" WMI line or with open 3/8" NPT threads if you plan to use braided lines.
Show More Show Less
1 Gallon Methanol Tank - Clear/White
1 Gallon Methanol Tank - Clear/White
Burger Motorsports - Corporate Logo
T#:558165
Part#: 1G-MT-CL
Ships Jul 8, 2025
$ 30.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 30.00 USD
Free Shipping on orders $49 and up
Add to Wish List
The least expensive option available from BMS, this 1 gallon tank is compact and flexible allowing for a wide range of mounting on any flat vertical surface in the trunk. The tank is clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a compression pump feed fitting Made in USA Tank dimensions: L 11" x W 4.5 x H 9"
Show More Show Less
Water/Methanol Injection Hose - 20'
Water/Methanol Injection Hose - 20'
Burger Motorsports - Corporate Logo
T#:21176944
Part#: BMS-WMI-IL
In Stock
$ 31.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 31.99 USD
Free Shipping on orders $49 and up
Add to Wish List
BMS Water/Methanol Injection (WMI) Solenoid W/ Filter
BMS Water/Methanol Injection (WMI) Solenoid W/ Filter
Burger Motorsports - Corporate Logo
T#:21176934
Part#: BMS-WMI-SOL
In Stock
$ 75.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 75.00 USD
Free Shipping on orders $49 and up
Add to Wish List
This solenoid safely stops fluid from flowing into your intake system when WMI is not in use. The solenoid features two 1/8 NPT ports with included compression 1/4 in. hose fittings for a quick leak-free connection. The included filter keeps dirt and debris out of your engine.
Show More Show Less
BMS Universal Water/Methanol Injection (WMI) Kit - Flash Only
BMS Universal Water/Methanol Injection (WMI) Kit - Flash Only ...
Burger Motorsports - Corporate Logo
T#:21176943
Part#: BMS-WMI-UNFO
Ships on Jul 15, 2025
$ 229.00 USD
Add to Wish List
$ 229.00 USD
Add to Wish List
WMI Inline Filter
WMI Inline Filter
Burger Motorsports - Corporate Logo
T#:21176933
Part#: BMS-WMI-FIL
Ships on Jul 15, 2025
$ 15.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 15.00 USD
Free Shipping on orders $49 and up
Add to Wish List
This heavy duty methanol/water injection filter is specifically designed for a methanol/water system can filter particles down to 40 microns in size. It safeguards the functional components of the water/methanol system as well as your engine from particulates present in the water/methanol mixture.
Show More Show Less
Super Atomizing Water/Methanol Injection Nozzles
Super Atomizing Water/Methanol Injection Nozzles
Burger Motorsports - Corporate Logo
T#:20815192
Part#: BMS.SA.WMI.NOZ
Ships on Jul 15, 2025
Starting at $ 40.00 USD
Add to Wish List
Starting at $ 40.00 USD
Add to Wish List
With CNC machined serviceable/cleanable nozzle inserts for precise fluid metering. Choose single or dual nozzles and match the flow rate to your power needs! ​Water/Methanol Injection (WMI) nozzles are determined by the intended power and how many bungs your charge pipe has. These nozzles are 1/8” NPT and screw in to bungs included on most aftermarket charge pipes. BMS "super atomizing" nozzles are designed and manufactured by BMS and are known for their great atomization and flow characteristics. The number on the methanol injection nozzle represents the approximate gallons per hour of fluid when at full flow. Generally speaking running two smaller nozzles is preferred to one larger nozzle for an equal flow to improve fluid atomization and distribution.
Show More Show Less

Select Vehicle

BMW Mini
Clear Vehicle

Purpose

Category

Brand

Price

$
$

Special Offers

Shipping