BMW Tools & Specialty Equipment for BMW X Series F16 (2015+)

Clear BMW chassis

Please ensure your correct model is selected

Performing certain maintenance and adjustments on your BMW is often a hassle or impossible without the proper tools. The difference between an enthusiast and an owner is the determination to get the job done on our own cars for pure satisfaction and to strengthen the bonds we share. All the specific tools you need to get the job done right, from fan clutch tools, cam alignment tools, and steering rack alignment tools, to coilover adjustment spanners, diagnostic equipment, and more have all been selected by our experts to help maintain your BMW.

Sub-Categories

Sort By:

MaxJax - Corporate Logo
T#:840348
Part#: 5215911
Ships in 4 Business Days
$ 210.00 USD
Free Shipping
$ 210.00 USD
Free Shipping
The standard anchor bolt kit includes 10 recessed anchors, 10 anchor bolts, and 10 flat washers, everything you need to anchor your MaxJax two-post portable car lift safely and securely
QuickJack - Corporate Logo
T#:403155
Part#: 5570216
Ships in 5 Business Days
$ 56.00 USD
Free Shipping
$ 56.00 USD
Free Shipping
Replacement long hydraulic hose - 2 required
QuickJack - Corporate Logo
T#:40342807
Part#: 5176113
Ships in 4 Business Days
$ 2,500.00 USD
Free Shipping
$ 2,500.00 USD
Free Shipping
This QuickJack package deal includes the 8000TLX extended vehicle lift, a set of QuickJack wall hangers (T#913727), and an SUV & Light Truck Adapter set (T#403120). ​The 8000TLX extended vehicle lift has a maximum lifting capacity of 8,000-lb. It is the highly anticipated sequel to QuickJack's beloved 7000TLX. With the ability to lift an extra 3-inches, the 8000TLX portable car lift provides more room to tackle every repair and maintenance task on vehicles weighing up to 8,000 lbs. The longer frames and 66" lift point make this kit perfect for larger SUVs and trucks. It also takes seconds to get up and running following initial one-time assembly. Just drop it on the ground and hook up the power. As soon as the jack frames and rubber blocks are in place under your vehicle, it'll be at a work-ready height in no time at all. Working in a garage can become troublesome when stuck with only a jack and a few jack stands. Not only are jack-stands very unsteady at raised heights, it also requires the long, tedious process of raising each corner individually. Eliminate this issue with a vehicle lift that is unlike any other lifting system you have seen! QuickJack can raise your vehicle with the push of a button, raising your vehicle to the lift's maximum height in just seconds. This allows you complete access to service your vehicle's suspension, drivetrain, and underbody, without any crossbeams to get in your way. Also, keeping safety paramount, QuickJack uses rugged, welded steel construction for strength and rock-solid stability, and features auto-locking bars that lock the lift and vehicle at a set height until you are finished. This ensures the lift will never fail with you underneath, standing up to the toughest real-world garage and track conditions. ​Through superior engineering and design, QuickJack has been able to produce an extra 3-inches of lifting height without sacrificing the overall dimensions that have made QuickJack a must-have in your garage. 8000TLX still has an impressive 3.5" lowered height, 76" overall length, and 12.5" overall width. **INTERNATIONAL CUSTOMERS NOTE** We are unfortunately unable to offer QuickJack internationally at this time. All international orders will be cancelled.
Show More Show Less

Performance Tool - Corporate Logo
T#:1809155
Part#: W41021
Ships in 1 Business Day
$ 59.99 USD
Free Shipping on orders $49 and up
Ratchet style for easy adjustments.

CTEK - Corporate Logo
T#:6476041
Part#: 40-327
In Stock at Vendor
$ 604.99 USD
Free Shipping
$ 604.99 USD
Free Shipping
The PRO25SE is an innovative, versatile, and highly efficient 25A battery charger and power supply.
Performance Tool - Corporate Logo
T#:2242221
Part#: W181
In Stock at Vendor
$ 40.99 USD
Free Shipping on orders $49 and up
Determines Moisture Level in Brake Fluid

Permatex - Corporate Logo
T#:371889
Part#: 24110
Ships in 1 Business Day
$ 34.22 USD
Free Shipping on orders $49 and up
An environmentally-friendly, green, non-melting, synthetic lubricant. It is formulated to lubricate under the most adverse brake conditions, assuring that critical caliper pins, sleeves, bushings, and pistons remain lubricated throughout pad life. Operating temperature: -40 to 495 degrees Fahrenheit.
Show More Show Less
QuickJack - Corporate Logo
T#:1965125
Part#: 5620291
Ships in 4 Business Days
$ 410.00 USD
Free Shipping
$ 410.00 USD
Free Shipping
Increases the lift point spread of the 5000TL, 7000TL, BL-5000SLX and BL-7000SLX by 6 inches

QuickJack - Corporate Logo
T#:3643614
Part#: 6000ELX
Ships in 4 Business Days
Starting at $ 2,694.00 USD
Free Shipping
Starting at $ 2,694.00 USD
Free Shipping
The frames of the 6000ELX are super-long, surpassing even the extended-length TLX series. This elongated frame design is particularly suited for vehicles with extremely long wheelbases, making it compatible with virtually all contemporary electric vehicles (EVs) as well as other models boasting extended wheelbases, including high-end luxury vehicles with lift points extending to the far edges of the vehicle frame.
Show More Show Less

Lisle - Corporate Logo
T#:5677377
Part#: LIS20700
Ships in 6 Business Days
$ 57.97 USD
Free Shipping on orders $49 and up
Great for spark testing on many applications.
QuickJack - Corporate Logo
T#:840364
Part#: 5300013
Ships in 4 Business Days
$ 100.00 USD
Free Shipping
$ 100.00 USD
Free Shipping

Urethane Pinch-Weld Block - Set provides a superior solution for supporting vehicles on pinch-weld rails. Traditional rubber blocks can cause damage to delicate body rails due to excessive pressure points. These urethane pinch-weld blocks are engineered with a cross-cut slotted design, allowing versatile positioning either lengthwise or crosswise. They are ideal for safely supporting rocker panels or sheet metal body rails, particularly those that have degraded from corrosion over time.

  • Specially formulated urethane rubber for durability
  • Deep bilateral slots accommodate virtually all pinch weld frames
  • Versatile positioning: lengthwise or crosswise
  • Water, chemical resistant, and 100% weatherproof
  • Single-piece construction ensures a superior hold
  • Dimensions: 3.9” (L) x 2.9” (W) x 2.4” (H)
Show More Show Less
AGA Tools - Corporate Logo
T#:5189207
Part#: AGA-SRP-N63
Ships in 7 Business Days
$ 113.99 USD
Free Shipping
$ 113.99 USD
Free Shipping
AGA Tools has manufactured custom pliers to make the removal and installation of valve stem seals quick and easy for any engine.


SPL Parts - Corporate Logo
T#:553641
Part#: SPLWRENCH
Ships in 1 Business Day
$ 62.00 USD
Free Shipping
$ 62.00 USD
Free Shipping

SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using chromoly seamless straight tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium qulaity products that are perfect to get your car back in spec.

This wrench is the perfect addition to your tool box. Made specifically for the SPL hybrid adjusters, it will not damage the finish and is small enough to make the needed adjustments in very tight spaces. Plus, this adjustment wrench comes with a bottle opener built in! Great for cracking open a cold one in your garage or at the track. This wrench is black anodized for looks and corrosion resistance and, as always, is made in the USA!

Show More Show Less
Performance Tool - Corporate Logo
T#:2242238
Part#: W352
Ships in 1 Business Day
$ 32.99 USD
Free Shipping on orders $49 and up
Heat treated alloy steel.
Performance Tool - Corporate Logo
T#:2242227
Part#: M197
Ships in 1 Business Day
$ 126.04 USD
Free Shipping
$ 126.04 USD
Free Shipping
Dual scale measurement adjustments in both Inch-Pound and Newton meter.

CTEK - Corporate Logo
T#:582079
Part#: 56-380
In Stock at Vendor
$ 47.99 USD
Free Shipping on orders $49 and up
Displays battery health at all times.

ARP - Corporate Logo
T#:4309
Part#: 100-9942
In Stock at Vendor
$ 202.99 USD
Free Shipping
$ 202.99 USD
Free Shipping
We highly recommend using a stretch gauge when installing rod bolts and other fasteners, where it is possible to measure the length of the fastener.
ATD Tools - Corporate Logo
T#:3657943
Part#: ATD3601
Ships in 1 Business Day
$ 59.99 USD
Free Shipping on orders $49 and up
Always have extra o-rings

ATD Tools - Corporate Logo
T#:5677365
Part#: ATD5573A
Ships in 6 Business Days
$ 359.99 USD
Free Shipping
$ 359.99 USD
Free Shipping
Use this tool to check for internal engine leaks
VTT “Spline Lock” Hub Puller
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:27638813
Part#: CRANK-PULLER-S55
Ships in 10 Business Days
Sale - Save 15% $ 74.99

This product was last offered at the strikethrough price on
09-03-2026

$ 63.74 USD
Free Shipping
Sale - Save 15%
$ 74.99

This product was last offered at the strikethrough price on
09-03-2026

$ 63.74 USD
Free Shipping
If you have a Spline lock installed they can be nearly impossible to get out without a proper puller. We designed these just for removing the hubs. When removed yours have your cut splines in the crank, on reassembly simply line the splines back up, and follow factory TQ, and stretch procedures on the new bolt.
Show More Show Less

CTEK - Corporate Logo
T#:6476045
Part#: 56-353
In Stock at Vendor
$ 199.99 USD
Free Shipping on orders $49 and up

CTEK Multi US 7002 is a new generation universal charger featuring a unique 8-step charging curve. This advanced technology, developed by CTEK, provides optimal care for the vehicle’s battery by ensuring it receives the best possible charging treatment. The CTEK Multi US 7002 can analyze whether the battery can retain the charge; if it cannot, the charger will indicate that the battery is faulty and needs replacement. Designed with safety in mind, CTEK chargers ensure protection for the user, vehicle, and battery.

  • Advanced Charging Technology: Features a unique 8-step charging curve for precise battery care.
  • Battery Analysis: Determines if the battery can hold a charge and alerts if replacement is needed.
  • Comprehensive Safety: Designed to ensure safety for the user, vehicle, and battery.
  • Optimal Battery Maintenance: Provides the best possible care for long-lasting battery performance.
Show More Show Less

Performance Tool - Corporate Logo
T#:1996201
Part#: W30937
Ships in 1 Business Day
$ 26.43 USD
Free Shipping on orders $49 and up
Chrome vanadium alloy steel construction for strength and durability.
Titan - Corporate Logo
T#:797038
Part#: TTN11038
Ships in 6 Business Days
$ 33.99 USD
Free Shipping on orders $49 and up
Fits Titan razor blade handles TIT12030 and TIT12031
Gear Wrench - Corporate Logo
T#:387079
Part#: KDT3977
Ships in 1 Business Day
$ 53.99 USD
Free Shipping on orders $49 and up
This tool is a variation of our popular 3976 Flat Band Hose Clamp Pliers and features 45º jaws with swivel tips to grip at any angle and pliers that latch securely in position.


Baum Tools - Corporate Logo
T#:641886
Part#: B130190KIT
Ships in 5 Business Days
$ 219.99 USD
Free Shipping
$ 219.99 USD
Free Shipping
Includes 130190, 130191 and 130280
Lisle - Corporate Logo
T#:5512194
Part#: 44210
Ships in 3 Business Days
$ 58.99 USD
Free Shipping on orders $49 and up
Allows Technicians to Compress the Emergency Brake Cable Spring with One Hand.
Lisle - Corporate Logo
T#:5512207
Part#: 82600
Ships in 6 Business Days
$ 134.99 USD
Free Shipping on orders $49 and up
Safely and Accurately Test Electrical Systems. Large, Easy to Read LCD Display with Backlight.

Striker Concepts - Corporate Logo
T#:579476
Part#: 342
Ships in 6 Business Days
$ 29.99 USD
Free Shipping
$ 29.99 USD
Free Shipping
Striker's TRiLIGHT offers excellent visibility for shops, driveways, or yards. Installs in your existing light fixture!

CTEK - Corporate Logo
T#:6460302
Part#: 40-006
In Stock at Vendor
$ 28.99 USD
Free Shipping on orders $49 and up
Easily mount your charger in the garage up and out of the way.
OTC - Corporate Logo
T#:5663643
Part#: OTC5905
Ships in 6 Business Days
$ 131.99 USD
Free Shipping on orders $49 and up
These high quality bit sockets will provide a lifetime of performance when used with hand tools.

Autel - Corporate Logo
T#:2914129
Part#: AL529HD
Ships in 6 Business Days
$ 264.99 USD
Free Shipping on orders $49 and up
Autel’s latest member of its code reader family of tools, the AL529HD can not only diagnose OBDII/EOBD-compatible vehicles but also heavy duty vehicles utilizing SAE-J1939 and SAE-J1708 protocols.
Baum Tools - Corporate Logo
T#:641924
Part#: B117110
Ships in 5 Business Days
$ 414.64 USD
Free Shipping
$ 414.64 USD
Free Shipping
To remove select main springs on the cam system

CTEK - Corporate Logo
T#:6476040
Part#: 40-328
In Stock at Vendor
$ 468.99 USD
Free Shipping on orders $49 and up
Advanced technology will ensure that a safe, fast charge is delivered to exactly meet the needs of the individual battery.

Hazet - Corporate Logo
T#:640838
Part#: 1976
Ships in 2 Business Days
$ 102.99

This product was last offered at the strikethrough price on
05-07-2026

$ 99.99 USD
Free Shipping on orders $49 and up
$ 99.99 USD
Free Shipping on orders $49 and up
Hazet - Corporate Logo
T#:725979
Part#: 8814
In Stock at Vendor
$ 101.99

This product was last offered at the strikethrough price on
05-07-2026

$ 98.99 USD
Free Shipping
$ 98.99 USD
Free Shipping
9.84" in total length
Performance Tool - Corporate Logo
T#:1809139
Part#: W80152
Ships in 1 Business Day
$ 40.99 USD
Free Shipping on orders $49 and up
Measures outside, inside, step and depth.


Race Ramps - Corporate Logo
T#:641869
Part#: RR-RACK-5
Ships in 10 Business Days
$ 362.99 USD
$ 362.99 USD
5" cutout rack ramp - 8.6 degree approach angle
Performance Tool - Corporate Logo
T#:1809143
Part#: W41031
Ships in 1 Business Day
$ 348.95 USD
$ 348.95 USD
Stable 4 wheel design.
Race Ramps - Corporate Logo
T#:641842
Part#: RR-CC-10
Ships in 10 Business Days
$ 463.99 USD
Free Shipping
$ 463.99 USD
Free Shipping
10" lift height crib cruisers

Race Ramps - Corporate Logo
T#:641850
Part#: RR-EX-14
Ships in 10 Business Days
$ 169.99 USD
$ 169.99 USD
xtenders for 67" race ramps – 6.6 degree approach angle

Performance Tool - Corporate Logo
T#:1855990
Part#: W89200
Ships in 1 Business Day
$ 107.99 USD
Free Shipping
$ 107.99 USD
Free Shipping
For use on most import and domestic vehicles equipped with disc brakes.
Hazet - Corporate Logo
T#:5691185
Part#: 958-2
Ships in 1 Business Day
$ 37.99

This product was last offered at the strikethrough price on
05-07-2026

$ 35.99 USD
Free Shipping on orders $49 and up
$ 35.99 USD
Free Shipping on orders $49 and up
A must have for any tool box.

CTEK - Corporate Logo
T#:6476032
Part#: 56-304
In Stock at Vendor
$ 28.49 USD
Free Shipping on orders $49 and up
Length: 8.2 ft
CTEK - Corporate Logo
T#:6460298
Part#: 40-339
In Stock at Vendor
$ 84.99 USD
Free Shipping on orders $49 and up
The CT5 POWERSPORT (part# 40-339) makes sure you're ready for action every time.

AGA Tools - Corporate Logo
T#:42638594
Part#: AGA-JR-8-14-DL
Ships in 7 Business Days
$ 139.99 USD
Free Shipping on orders $49 and up
Transform your floor jack into a reliable, stable jack stand with the AGA Dual Lever Jack Rod Stand, a new Jack Rod Stand variant designed for commercial use that will fit most floor jacks.

OTC - Corporate Logo
T#:5663641
Part#: OTC6297
Ships in 6 Business Days
$ 187.99 USD
Free Shipping on orders $49 and up
This tool is used to separate the ball joint from the spindle support arm.
Performance Tool - Corporate Logo
T#:5095671
Part#: W85025
Ships in 1 Business Day
$ 207.99 USD
Free Shipping on orders $49 and up
Reinforced seat supports up to 350 lbs
OEM Tools - Corporate Logo
T#:5691175
Part#: OEM25337
Ships in 6 Business Days
Sale - Save 11% $ 46.99

This product was last offered at the strikethrough price on
08-23-2026

$ 42.00 USD
Free Shipping on orders $49 and up
Sale - Save 11%
$ 46.99

This product was last offered at the strikethrough price on
08-23-2026

$ 42.00 USD
Free Shipping on orders $49 and up
Make the job of separating spot welds much easier.