BMW Engine Parts for BMW X Series F16 (2015+)

Clear BMW chassis

Please ensure your correct model is selected

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

Dorch Engineering - Corporate Logo
T#:55569526
Part#: DE-LK-1038-PWGKT
Ships in 5 Business Days
New Item
$ 1,799.00 USD
$ 1,799.00 USD
The factory N55 fueling system leaves a lot to be desired once you turn up the boost. Enter the Dorch Engineering HPFP Lift Kit. This kit is a calculated, high performance solution designed specifically for PWG N55 engines to extract maximum flow from your fueling setup by altering the mechanical lift profile of the pump drive
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:51672701
Part#: VTT-EXTENDED-STU
Ships on Oct 14, 2026
New Item
$ 3.99 USD
Free Shipping
$ 3.99 USD
Free Shipping
The VTT-FAB Extended M7 Studs are the professional’s choice for securing thick-flange manifolds on N54, N55, S55, and B58 engines.
Dorch Engineering - Corporate Logo
T#:55569519
Part#: DE-LK-1038-EWGKT
Ships in 5 Business Days
New Item
$ 1,799.00 USD
$ 1,799.00 USD
The Dorch Engineering Lift Kit HPFP Upgrade is engineered to completely eradicate direct-injection fueling limitations, providing up to 38% more flow volume on top of your existing Dorch fuel pump setup.
Show More Show Less

Vargas "Spline Lock" Crank Hub Solution - BMW N55 & S55
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:51918889
Part#: VTT-NS55CHSCP
Ships on Oct 14, 2026
New Item
$ 889.99 USD
Free Shipping
$ 889.99 USD
Free Shipping
The VTT Spline Lock Crank Hub Solution represents a massive leap in drivetrain engineering by moving away from friction-based or pinned interfaces.

JE Piston - Corporate Logo
T#:33612897
Part#: 3380966
In Stock at Vendor
$ 1,649.99 USD
Free Shipping on orders $49 and up
JE Pistons for the N55 engine are precision-engineered for BMW’s single-turbo 3.0L inline-six. These forged pistons are built for high-performance applications, offering exceptional strength and durability under extreme conditions. Designed to handle high boost pressures and increased power, they feature optimized crown shapes and valve reliefs to improve combustion efficiency. Their lightweight construction reduces rotational mass, enhancing throttle response and engine efficiency. With customizable options for compression ratios and coatings, JE Pistons are ideal for tuning and motorsport setups, ensuring reliable performance in both street and track environments.
Show More Show Less
EWG BILLET CNC Valve Cover - Red
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:41695014
Part#: VTTS55BILLETVCRE
Ships on Oct 14, 2026
$ 1,519.99 USD
Free Shipping
$ 1,519.99 USD
Free Shipping
Absolutely — here’s a reworded version of the product description in the ECS Tuning dialect, capturing the same details with a more engaging and enthusiast-focused tone: --- **VTT Billet CNC Valve Cover – S55/N55 EWG** Say goodbye to brittle factory plastics and elevate your engine bay with the Vargas Turbo Technologies Billet CNC Valve Cover – the ultimate solution for BMW S55 and N55 EWG owners chasing reliability, performance, and high-end style. Precision-crafted from 100% CNC-machined 6061-T6 aircraft-grade aluminum, this cover ditches the OEM failure-prone plastic for a rugged, motorsport-ready upgrade that’s built to take the heat – and the boost. ### Why It Belongs in Your Build: * **Bulletproof Construction:** Solid billet aluminum means no cracks, no leaks – just unshakable strength that outlasts stock plastic by miles. * **Performance-Minded Weight:** At only 9.7 lbs, it’s a lightweight beast – just 1.8 lbs heavier than stock, but loaded with benefits. * **Anodized Armor:** Dress your engine bay with anodized color options – choose clear, black, red, blue, or gold to match your vibe. * **Custom PCV Configs:** Kills the fragile OEM PCV setup and gives you flexibility for a clean, powerful crankcase solution – whether you're keeping it stock or running a full catch can. * **Baffled to Perfection:** Integrated baffling keeps oil where it belongs, not in your intake tract. * **All-In Kit:** Comes ready to rock with ORB plugs or banjo fittings, plus -10 silicone hose – install and go. ### Heads Up on Install: Upgrading to this billet beauty wipes out the stock PCV – and that's a good thing. But to keep your engine breathing right, you’ll need an external PCV setup to maintain crankcase vacuum at idle. Want max reliability? Block off those head ports and let this cover handle the pressure without relying on a gasket alone. ### Built for Big Power: If you're running a single turbo conversion, this is your cover. It offers cleaner lines, better heat resistance, and improved fitment where it counts. ### Customize Your Cover: * **Finish Options:** Clear, black, red, blue, or gold anodizing. * **Breather Cap Choices:** Stock-style oil cap or a VTT billet one-way breather. * **Fitting Options:** Dual -10 ORB plugs, or go hybrid with a banjo and plug. * **Titanium Hardware:** Add some flair with black, burnt, or natural finish Ti bolts. * **Catch Can Ready:** Pair with VTT’s catch can for a full crankcase solution. ### Backed by VTT: Includes a 12-month warranty for confidence on and off the track. ### Price: Starting at \$1,499.00 – premium build, race-ready features, and engine bay clout to match. --- Let me know if you want this in shorter format for a product listing, social caption, or email drop.
Show More Show Less

Vargas EWG Actuator To Garrett G25-G35 Housing Bracket - BMW EWG G25/...
For vehicles with Electronic Waste Gate
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:51778114
Part#: VTT-FAB-BMW-EWG-
Ships on Oct 14, 2026
New Item
$ 79.99 USD
Free Shipping
$ 79.99 USD
Free Shipping
The Vargas EWG Actuator Bracket is the definitive solution for enthusiasts looking to merge BMW’s advanced factory EWG control with the high-performance capabilities of Garrett G-Series turbochargers.
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:51672717
Part#: VTT-MAP-HARNESS
Ships on Oct 14, 2026
New Item
$ 59.99 USD
Free Shipping
$ 59.99 USD
Free Shipping
As part of the VTT-FAB fabrication line, this extension harness is designed for builders and tuners who need flexibility.

Vargas "Spine Lock" Crank Hub - BMW N55/S55
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:51918887
Part#: VTT-NS55CHO
Ships on Oct 14, 2026
New Item
$ 819.99 USD
Free Shipping
$ 819.99 USD
Free Shipping
The Vargas Spline Lock Crank Hub is the solution for BMW owners seeking to push their N55 or S55 engines to the limit without the fear of catastrophic timing failure.

Vargas Turbo Technologies - Corporate Logo
T#:52094551
Part#: VTT-DCS-EWG-ONLY
Ships on Oct 14, 2026
New Item
$ 839.99 USD
Free Shipping
$ 839.99 USD
Free Shipping
The Universal DCS System is the ultimate boost control solution for any vehicle, regardless of whether it came with factory electronic wastegate control.
Vargas Billet Motor Mount Inserts - BMW N20/N54/N55
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:51918860
Part#: VTT-INSERT-4
Ships on Oct 14, 2026
New Item
$ 434.99 USD
Free Shipping
$ 434.99 USD
Free Shipping
The VTT Billet Motor Mount Insert Kit is for BMW N20/N54/N55 owners who want to eliminate the excessive engine pitch and drivetrain slop.


Adjustable Hose Clamp - Priced Each
10X Entries Into Our F80 M3 Sweepstakes
ECS - Corporate Logo
T#:378848
Part#: 25-40/9
In Stock
$ 3.11 USD
Free Shipping on orders $49 and up

For versatile hose fitting solutions, look no further than the Adjustable Hose Clamp. This essential tool offers a secure and adjustable grip for various hose sizes, ensuring leak-free connections in automotive, plumbing, and industrial applications. With its durable construction and user-friendly design, the Adjustable Hose Clamp is a must-have for any toolbox.

  • Provides secure and adjustable grip
  • Suitable for various hose sizes
  • Ensures leak-free connections
  • Ideal for automotive, plumbing, and industrial applications
Show More Show Less
Precision Raceworks - Corporate Logo
T#:38161700
Part#: 501-0115
In Stock
$ 169.99 USD
Free Shipping on orders $49 and up

Inline Fuel Filter AN8 Single In/Out - Universal Fitment | Precision Raceworks is a high-performance fuel filtration solution designed for BMW and other high-performance applications. This inline fuel filter ensures superior filtration, protecting your engine from contaminants that can compromise fuel system performance.

Crafted from high-quality billet aluminum, the filter body is precision-machined for durability and reliability. Featuring AN8 female ORB fittings on each end, this universal-fitment filter integrates seamlessly into custom fuel setups, making it ideal for both street and track applications.

  • Precision-machined billet aluminum construction – Ensures strength, durability, and long-lasting performance
  • AN8 female ORB fittings – Compatible with a wide range of fuel system setups
  • High-flow filtration – Effectively removes contaminants to protect fuel injectors and engine components
  • Universal fitment – Ideal for custom fuel system configurations in BMW and other performance vehicles
  • Corrosion-resistant anodized finish – Provides excellent protection against fuel and environmental factors
  • Reliable and efficient fuel delivery – Supports high-performance and racing applications

Note: Mounting hardware is not included.

Ensure clean and efficient fuel delivery with the Inline Fuel Filter AN8 Single In/Out - Universal Fitment | Precision Raceworks, engineered for high-performance reliability.

Show More Show Less
Precision Raceworks - Corporate Logo
T#:40004857
Part#: 201-0260
Ships in 6 Business Days
$ 1,599.00 USD
Free Shipping on orders $49 and up
The Precision Raceworks N55/S55 Upgraded DI Injectors are designed for customers looking to push the limits without port injection (or in addition to port injection). Our high flow injectors were developed in a partnership with NHP, taking advantage of resources offered by both companies to produce the highest quality and highest flowing direct injector upgrade ever for the N55 engine. These high flow injectors flow 55% over stock! Each injector is tested and calibrated using state of the art high pressure flow calibration equipment and then matched to a set of 6. Installation of these is a snap and is as simple as replacing your injectors, a little coding, and then checking a checkbox!
Show More Show Less

Precision Raceworks - Corporate Logo
T#:38094338
Part#: 201-0181
Ships in 6 Business Days
$ 17.99 USD
Free Shipping on orders $49 and up
This fitting allows you to terminate an AN-6 PTFE fuel line with a secure, leak-free 9.89mm male quick-connect, making it an ideal solution for upgrading or modifying fuel delivery systems in high-horsepower, E85, and race-fuel applications.
Show More Show Less

Precision Raceworks - Corporate Logo
T#:38229121
Part#: 101-0078
Back Ordered
$ 15.99 USD
Free Shipping on orders $49 and up
The Black Market Parts (by Precision Raceworks) OE-Spec Charge Pipe O-Ring is made out of Viton and is capable of withstanding all fuels (including e85) as well as oils. These o-rings are made to OE specifications and are a direct replacement for the seal found in your factory or aftermarket charge pipe.
Show More Show Less
Precision Raceworks - Corporate Logo
T#:38195421
Part#: 601-0054
Ships in 6 Business Days
$ 14.99 USD
Free Shipping on orders $49 and up
The Black Market Parts Universal Fuel Pump Wiring Kit is a one-stop shop solution for anyone looking to add an additional fuel pump to their fuel tank. This compact kit provides 6 inches of 100% E85 compliant 12 gauge wiring so you don't have to buy complete spools of wire just to get the little wire you need to extend the pump harness. The kit also includes all hardware for bulk head style pass-through for power used by pump manufacturers around the world. Full stainless bulk head power posts make it easy to add pass-through power to any fuel pump
Show More Show Less

Precision Raceworks - Corporate Logo
T#:38094325
Part#: 201-0176
Ships in 6 Business Days
$ 14.99 USD
Free Shipping on orders $49 and up
This setup involves a PTFE AN6 fitting that connects to a 7.89mm male quick-connect (QC) fitting, commonly used in fuel or fluid systems. The PTFE hose offers excellent durability, with resistance to chemicals, heat, and pressure. The AN6 fitting ensures a secure connection, while the 7.89mm male QC fitting allows for fast, tool-free connections and disconnections. When choosing this fitting, ensure it's compatible with both your PTFE hose and system. Need help finding the right components?
Show More Show Less
Precision Raceworks - Corporate Logo
T#:38161695
Part#: 201-0360-RED
Ships in 10 Business Days
$ 5.99 USD
Free Shipping on orders $49 and up
Upgrade any wiring system with this optimal solution, ensuring reliability and durability in any demanding automotive application. Red in color and 12 Gauge.

Precision Raceworks - Corporate Logo
T#:38161738
Part#: 201-0331
In Stock
$ 15.99 USD
Free Shipping on orders $49 and up
Convert your AN-8 ORB port to an AN-6 Male flare fitting with Viton O-Ring *O-Ring on AN6 side is only utilized if threading into ORB port

Bosch Flow Matched EV14 Injectors - US CAR Connector (EV6) - 1300cc -...
NOT A DIRECT REPLACEMENT FOR FACTORY INJECTORS - For use with aftermarket port injectio...
Bosch - Corporate Logo
T#:47679243
Part#: 501-0116
Ships in 8 Business Days
$ 884.99 USD
Free Shipping on orders $49 and up
$ 884.99 USD
Free Shipping on orders $49 and up
The Black Market Parts Genuine Bosch Motorsports EV14 fuel injectors featuring USCAR (EV6) connector matched and packaged in a pack of 6 units. Direct plug-in for Motiv Reflex, AIC, and Nexsys Motorsports
Show More Show Less
Supertech - Corporate Logo
T#:21604325
Part#: SPR-FE20BE-2-24
Ships in 9 Business Days
$ 494.99 USD
Free Shipping on orders $49 and up
Supertech has the high performance valvetrain components you need to take your build to the next level. Seat Pressure: 84 @ 37 Open Pressure: 157 @ 10 Max Lift: 12.2mm Coil Bind: 23.20mm OutSpr.ID: 17.60mm InnSpr.OD: 21.00mm InnSpr.ID: 14.20mm Rate: 7.25
Show More Show Less
Supertech - Corporate Logo
T#:14783497
Part#: BMIVN-1055S
Ships in 9 Business Days
$ 25.99 USD
Free Shipping on orders $49 and up
Head Diam: 32mm (std) Material: Stainless Steel 21-4N Groove Type: Single Groove Length: 104.9mm Stem Diam: 4.97mm


Walbro - Corporate Logo
T#:38128034
Part#: 125-190
Ships in 9 Business Days
$ 15.99 USD
Free Shipping on orders $49 and up
Perfect for vehicle owners looking to maintain their vehicle’s fuel system integrity, this Walbro Pump Filter Sock replacement is a reliable upgrade for optimal driving performance.
Supertech - Corporate Logo
T#:21604319
Part#: RET-BMN54-TI
Ships in 9 Business Days
$ 16.99 USD
Free Shipping on orders $49 and up
7 Degree - 5mm valve stem - Single or Tripe Groove Valves
Supertech - Corporate Logo
T#:21604306
Part#: SPR-FE20BE-2
Ships in 9 Business Days
$ 20.99 USD
Free Shipping on orders $49 and up
Supertech has the high performance valvetrain components you need to take your build to the next level. Seat Pressure: 84 @ 37 Open Pressure: 157 @ 10 Max Lift: 12.2mm Coil Bind: 23.20mm OutSpr.ID: 17.60mm InnSpr.OD: 21.00mm InnSpr.ID: 14.20mm Rate: 7.25
Show More Show Less

Supertech - Corporate Logo
T#:21604320
Part#: RET-BMN54-TE
Ships in 9 Business Days
$ 16.99 USD
Free Shipping on orders $49 and up
7 Degree - 6mm valve stem - Single or Tripe Groove Valves

Supertech - Corporate Logo
T#:21604324
Part#: SPR-FE20BE-24
Ships in 9 Business Days
$ 471.99 USD
Free Shipping on orders $49 and up
$ 471.99 USD
Free Shipping on orders $49 and up
Supertech has the high performance valvetrain components you need to take your build to the next level. Seat Pressure: 75 @ 37 Open Pressure: 155 @ 10 Max Lift: 12.2mm Coil Bind: 23.20mm Rate: 8 OutSpr.ID: 17.60mm InnSpr.OD: 21.00mm InnSpr.ID: 14.20mm
Show More Show Less
Black Walnut Shell 20/30 Blast Media
10X Entries Into Our F80 M3 Sweepstakes
Bavarian Autosport - Corporate Logo
T#:22690744
Part#: B1100051
Ships in 9 Business Days
Sale - Save 20% $ 73.99

This product was last offered at the strikethrough price on
05-03-2026

$ 59.19 USD
Free Shipping on orders $49 and up
Sale - Save 20%
$ 73.99

This product was last offered at the strikethrough price on
05-03-2026

$ 59.19 USD
Free Shipping on orders $49 and up
This blast media makes DIY carbon cleaning a breeze!

Precision Raceworks - Corporate Logo
T#:38094333
Part#: 201-0231
Ships in 10 Business Days
$ 19.99 USD
Free Shipping on orders $49 and up
Whether you're modifying your fuel lines for increased horsepower, adding a secondary fuel system, or upgrading to a more efficient setup, this 45-degree plug-and-play PTFE fitting delivers unmatched performance, easy installation, and rock-solid reliability.
Show More Show Less
Precision Raceworks - Corporate Logo
T#:38161710
Part#: 201-0362
Ships in 10 Business Days
$ 4.99 USD
Free Shipping on orders $49 and up
Upgrade any wiring system with this optimal solution, ensuring reliability and durability in any demanding automotive application. Black in color and 18 Gauge dual wire.

Precision Raceworks - Corporate Logo
T#:38161711
Part#: 201-0360-BLK
Ships in 10 Business Days
$ 4.99 USD
Free Shipping on orders $49 and up
Upgrade any wiring system with this optimal solution, ensuring reliability and durability in any demanding automotive application. Black in color and 12 Gauge.

Precision Raceworks - Corporate Logo
T#:38094326
Part#: 201-0243
Ships in 10 Business Days
$ 14.99 USD
Free Shipping on orders $49 and up
A PTFE AN6 fitting to male AN6 flare is commonly used in fuel or fluid systems. The PTFE AN6 fitting ensures a secure connection to a PTFE hose, offering superior resistance to heat, pressure, and chemicals. The male AN6 flare fitting provides a tight, leak-proof seal, ideal for high-performance applications that require dependable, durable connections.
Show More Show Less
Precision Raceworks - Corporate Logo
T#:38161703
Part#: 201-0360-BLU
Ships in 10 Business Days
$ 4.99 USD
Free Shipping on orders $49 and up
Upgrade any wiring system with this optimal solution, ensuring reliability and durability in any demanding automotive application. Blue in color and 12 Gauge.
Precision Raceworks - Corporate Logo
T#:38094334
Part#: 201-0233
Ships in 10 Business Days
$ 29.99 USD
Free Shipping on orders $49 and up
The AN-6 PTFE 90-Degree Fitting to 9.89mm Female Quick Connect is designed for seamless fuel system integration, featuring a durable air-hose-style quick-release for secure, leak-free connections in high-performance applications.
Show More Show Less


Precision Raceworks - Corporate Logo
T#:38161698
Part#: 201-0360-ORG
Ships in 10 Business Days
$ 4.99 USD
Free Shipping on orders $49 and up
Upgrade any wiring system with this optimal solution, ensuring reliability and durability in any demanding automotive application. Orange in color and 12 Gauge.
Precision Raceworks - Corporate Logo
T#:38094329
Part#: 101-0228
Ships in 10 Business Days
$ 34.99 USD
Free Shipping on orders $49 and up
Vise jaws for AN fittings are essential tools that securely hold AN fittings during assembly or disassembly. Made from soft aluminum or plastic, they prevent damage by firmly gripping the fittings without scratching or marring the surface. These jaws help preserve the integrity of threads and sealing surfaces, ensuring leak-proof and reliable connections in fuel or fluid systems.
Show More Show Less
Precision Raceworks - Corporate Logo
T#:38195450
Part#: 601-0259
Ships in 10 Business Days
$ 64.99 USD
Free Shipping on orders $49 and up
For enthusiasts seeking to regulate fuel pressure at the engine without the complexities of manual adjustments or the need for a 1:1 boost reference, a preset fuel pressure regulator offers an ideal solution. These compact regulators are designed for straightforward installation and consistent performance.
Show More Show Less

Precision Raceworks - Corporate Logo
T#:38094314
Part#: 201-0174
Ships in 10 Business Days
$ 19.99 USD
Free Shipping on orders $49 and up
The AN-6 GTFE 90-Degree Fitting to AN-6 Female Flare is a premium-grade, precision-machined adapter crafted for effortless fuel system compatibility and optimal performance.

Precision Raceworks - Corporate Logo
T#:38094341
Part#: 201-0182
Ships in 10 Business Days
$ 34.99 USD
Free Shipping on orders $49 and up
Engineered for seamless fuel system integration, this precision-machined 90-degree fitting is designed with a 7.89mm female quick connect on one end and a 9.89mm female quick connect on the other. Built for maximum convenience, it features an air hose-style quick connect system, ensuring effortless, secure connections without the need for special tools.
Show More Show Less
Precision Raceworks - Corporate Logo
T#:38262760
Part#: 601-0227
Ships in 10 Business Days
$ 429.99 USD
Free Shipping on orders $49 and up
If you plan on upgrading your turbos or increasing power in some other way, you will also want to consider upgrading your fueling capability as well! Using stock BMW injectors, you will likely top out at around 550rwhp on 93 Octane with water/methanol injection (or less if running an ethanol blend). At the end of the day, the stock injectors just are not enough. Introducing Black Market Parts (by Precision Raceworks) Multi-Port Injection Kit with flex-fuel compatibility! This kit allows you to safely and sufficiently support greater power levels with supplemental fueling without straining your stock fuel system. This kit integrates seamlessly into your car as if it were installed at the factory; you can’t even see the kit once the car is assembled! This kit includes everything needed to add multi-port injection and is 100% e85 compliant. Precision Raceworks includes new Genuine Bosch injectors which are flow matched both static and dynamic by an outside lab to industry-leading requirements. A Detailed certificate of conformance and genuine Bosch product certificate is included with each kit, giving you all flow data needed for optimal tuning. Don’t be tricked into thinking all port injection kits are equal, the BMP kit is the industry leader. This kit features 750cc* injectors standard (this flow rate is based on industry-standard injector flow test pressure of 43.5psi), and at 72psi these injectors flow over 1000cc. This means Precision's BMP Port Injection Kit is capable of supporting builds from 400whp up to 1,000whp and anywhere in between! Simply pick up this kit and pair it with your favorite injector controller and you are ready to go!
Show More Show Less

Precision Raceworks - Corporate Logo
T#:38094340
Part#: 201-0221
Ships in 10 Business Days
$ 12.99 USD
Free Shipping on orders $49 and up
Upgrade your fuel system with this Fuel line fitting TEE featuring AN-6 Male threads on all three ends, and enjoy a high-flow, race-ready solution built for maximum performance and reliability.
Precision Raceworks - Corporate Logo
T#:18003817
Part#: PRINJPLGS
Ships in 9 Business Days
Starting at $ 9.99 USD
Free Shipping on orders $49 and up
Starting at $ 9.99 USD
Free Shipping on orders $49 and up
Use these in replacement of any standard short body EV14 style injector. These include appropriate o-rings for any of Precision Raceworks' port injection kits, including their aftermarket manifolds. Unlike other injector plugs, these feature shoulders to prevent the plug from sliding too far in either direction
Show More Show Less

Precision Raceworks - Corporate Logo
T#:38161693
Part#: 201-0360-WHT
Ships in 10 Business Days
$ 4.99 USD
Free Shipping on orders $49 and up
Upgrade any wiring system with this optimal solution, ensuring reliability and durability in any demanding automotive application. White in color and 12 Gauge.

Precision Raceworks - Corporate Logo
T#:38094339
Part#: 201-0227
Ships in 10 Business Days
$ 29.99 USD
Free Shipping on orders $49 and up
Upgrade your fuel system with the Precision Raceworks 90-degree fitting, and experience the convenience of air hose-style quick connects for efficient and easy-to-manage fuel system setups.
Precision Raceworks - Corporate Logo
T#:38094343
Part#: 201-0180
Ships in 10 Business Days
$ 19.99 USD
Free Shipping on orders $49 and up
This high-quality fitting is designed for seamless integration with an ethanol content sensor or a 3/8" male quick disconnect.
Precision Raceworks - Corporate Logo
T#:38094323
Part#: 201-0179
Ships in 10 Business Days
$ 14.99 USD
Free Shipping on orders $49 and up
The Precision Raceworks PTFE to AN-6 Female Flare Fuel Line Fitting is designed for high-performance fuel systems. Constructed from durable PTFE material, it ensures compatibility with various automotive applications. This universal fitting is suitable for numerous vehicle platforms, providing flexibility in fuel line routing. Features: AN-6 Compatibility: Designed to connect PTFE fuel lines to AN-6 female flare fittings, ensuring a secure and leak-free connection. Durable Construction: Made from high-quality PTFE material, offering resistance to fuel additives and high temperatures. Universal Fitment: Suitable for a wide range of vehicles, providing flexibility in fuel line routing. High-Performance Design: Engineered to meet the demands of high-performance fuel systems, ensuring reliable fuel delivery. For more information, visit the product page on Precision Raceworks' website.
Show More Show Less


Precision Raceworks - Corporate Logo
T#:38094336
Part#: 201-0189
Ships in 10 Business Days
$ 24.99 USD
Free Shipping on orders $49 and up
The AN-6 PTFE 90-Degree Fitting to 9.89mm Female Quick Connect features a durable air-hose-style quick-release for secure, corrosion resistant coating and a leak-free connection for high-performance applications.
Show More Show Less
Precision Raceworks - Corporate Logo
T#:38094331
Part#: 201-0222
Ships in 10 Business Days
$ 27.99 USD
Free Shipping on orders $49 and up
The Precision Raceworks PTFE Fuel Line Fitting 135-Degree AN-6 Female Flare is a premium component designed for optimal fuel system routing. Its 135-degree angle enhances flexibility and provides better clearance in confined spaces. The AN-6 female flare connection ensures a secure, leak-proof fit, while its PTFE compatibility offers exceptional resistance to heat, pressure, and chemicals, making it perfect for high-performance applications.
Show More Show Less