Fluids for BMW X Series F16 (2015+)

Clear BMW chassis

Please ensure your correct model is selected

If you're looking for BMW engine oil, brake fluid, transmission and diff fluid, power steering fluid, or coolant, this is the place. We also stock a variety of additives that we have seen benefits from.

Sub-Categories

Sort By:

Pentosin CHF 11S Hydraulic/Power Steering Fluid - BMW & MINI (Green S...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!
Pentosin - Corporate Logo
T#:340532
Part#: CHF11S
In Stock
$ 30.99 USD
Free Shipping on orders $49 and up
Pentosin CHF 11S is a synthetic high-performance hydraulic fluid for lifetime application in modern vehicle aggregates. Pentosin CHF 11S is specially designed for hydraulics in the automotive industry with the highest technical requirements such as in: power steering, level control, shock absorber, hydro-pneumatic suspension, stability and traction control, hydraulics for convertible tops, central lock systems, etc. It is suitable for all extreme conditions and guarantees full performance from -40°C to over 130°C system temperature. Contains 1 liter of fluid. Please check owner or service manual for correct application information. NOTE: For BMW applications, only use CHF 11S when a green sticker is clearly marked on the power steering reservoir cap, do not mix with standard ATF as this can cause issues with the power steering system.
Show More Show Less
Red Line MT-90 Manual Transmission Fluid 75w90 - 1 Quart - BMW ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Redline - Corporate Logo
T#:340531
Part#: RL MT90
In Stock
$ 25.49 USD
Free Shipping on orders $49 and up
RED LINE MT-90 is designed to provide excellent protection and improved shiftability for manual transmissions and transaxles. MTL and MT-90 have cured the problem of hard shifting in numerous transmissions which have notoriously difficult shifting. The secret to their success is two-fold. First, they have the appropriate coefficient of friction for most manual transmission synchronizers. Many gear oils, engine oils, and ATFs are too slippery for proper synchro engagement. Secondly, the viscosity characteristics of MTL and MT-90 allow proper shifting over the entire temperature range which the transmission will experience. The synthetic base oils used have a very high viscosity index which provides relatively constant viscosity as temperature changes. MTL is a low 75W, almost a 70W, at very low temperatures and a high 80W, nearly an 85W, at elevated temperatures, providing adequate viscosity to prevent wear and deaden gear noise. MT-90 is a thicker 75W90 version of MTL. The shear stability and oxidation stability of these products are excellent, thus the physical characteristics of Red Line MTL and MT-90 will change little with use.
Show More Show Less
Synthoil Premium 5w-40 Engine Oil - 5 Liter
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!
Liqui-Moly - Corporate Logo
T#:369350
Part#: 2041
In Stock
33% off MSRP $ 81.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 54.99 USD
Free Shipping on orders $49 and up
33% off MSRP
$ 81.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 54.99 USD
Free Shipping on orders $49 and up

Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication! Select your vehicle to make sure you are viewing the best Liqui Moly options for your application.?

Synthoil Premium engine oil is a fully synthetic?engine oil designed to provide the highest amount of engine wear protection as well as fuel savings and reduced oil consumption possible - Liqui Moly prides Synthoil on its ability to withstand long intervals between oil changes and provide protection in extremely demanding conditions. Using proprietary blends of base oils and the latest additive technology, this oil will ensure smooth running gasoline and diesel engines in both high and low temperatures.?

Approved for the following specifications:

  • ACEA A3-04 / B4-04
  • API SM / CF

Recommended for the following specifications:

  • BMW Longlife-98
  • MB 229.3
  • Porsche A40
  • VAG 502.00 / 505.00

Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

Show More Show Less

Torque RT700 Racing Brake Fluid - 500ml
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Torque Racing Brake Fluid - Corporate Logo
T#:363887
Part#: RT700-1
In Stock
$ 33.99 USD
Free Shipping on orders $49 and up
Produced and bottled exclusively in North Bay, California, Torque sells just one product: the best racing brake fluid on the market! Specifically engineered to be the highest density brake fluid on the planet, Torque RT700 does a great job of protecting your braking system components from corrosion, even under high heat loads - it exceeds DOT3 and DOT4 brake fluid requirements and is ideal for high-performance applications, with a boiling point of an incredible 683 degrees Fahrenheit! It can be safely mixed with DOT3, DOT4 and DOT5.1 brake fluids, but for best performance, it is recommended that you flush your braking system and start fresh.
Show More Show Less

Genuine BMW TwinPower Turbo 5W-30 Engine Oil - 5 Liter
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Genuine BMW - Corporate Logo
T#:14882896
Part#: 83215A78F80
In Stock
$ 68.99 USD
Free Shipping on orders $49 and up
Now available in a 5L jug, The BMW 5W30 motor oil is the factory engine oil approved for almost all BMW engines, except for BMW Diesel and some M3/M5/M6 engines. It's the first oil approved in the US for BMW's turbo N20 N54 N55 engines, including the S55 engine in the 2015+ F80 M3/F82 M4. This oil can also be used in E39 M5 and Z8 with the S62 engine, per the label inside the engine compartment. It can also be used in most MINI engines.

This oil was especially formulated for the USA market to meet compatibility requirements with the high sulfer content in our fuels. It meets BMW LL01 and API SL specs for gasoline engines from 1997 up through today as well as ACEA A3/B3 requirements. This is the current oil used in BMW dealerships.

In January 2015 BMW changed official oil suppliers from Castrol to Shell. The new oils are designed to meet requirements of both the newer engines as well as older BMWs. This oil can be used in cars with either normally aspirated and or turbocharged engines.

Beginning with July 2015 production, new models came with 0W20 or 0W30 BMW oil. However, BMW dealerships continued to sell 5W30 until that stock was depleted. The 5W30 is an acceptable alternative to the 0W20 and 0W30 BMW oil per BMW's service bulletin.
Show More Show Less
Proline Engine Flush and Cera Tec Oil Treatment - Oil Change Additive...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!
Liqui-Moly - Corporate Logo
T#:578656
Part#: CERATECFLUSHKT
In Stock
$ 52.99 USD
Free Shipping on orders $49 and up
**Not to be used with Liqui Moly Molygen Engine Oil - Molygen already includes friction modifiers** Step 1 - Engine Flush - Add to engine oil before engine oil change. Let engine run on idle speed for 10 minutes. Drain oil, change oil filter and re-fill with fresh high quality oil. Pro-Line Engine Flush is a development product based on highly effective state-of-the-art additive technology. These highly effective detergent and dispersant additives, in association with the carrier fluid, have been tested in the laboratory and in practical field trials for their ability to dissolve sludge and lacquer formers. All types of oil-soluble and oil-insoluble residues are brought into suspension and removed during the next oil change. An engine which has been cleaned of deposits and contamination and which is then filled with fresh oil not contaminated with old impurities can develop its full performance characteristics. Properties: Gentle and rapid cleaning Neutral to seals and other materials installed in the engine Compatible with catalytic converters Highly economical No additional environmental pollution Simple to use Contents sufficient for 5 liter engine oil capacity Fully compatible with all commercially available engine oils. Benefits: Removes deposits & residues Dissolves sludge & lacquer and isolates solid particles & liquid contaminants Improves the combustion process and restores full engine performance Prevents corrosion of unprotected metal surfaces Recovers oil lubricating properties Suitable for all gasoline and diesel engines. Step 2 - Cera Tec - Add in with your New Engine Oil Cera Tec is a high quality ceramic wear protection product which is safe for use in all engine oils. It reduces friction and wear due to ceramic compounds that withstand extremely high chemical and thermal loads. Cera Tec reduces direct metal-to-metal contact, thus increasing the engine service life. The low-friction effect reduces fuel consumption in gasoline and diesel engines. The chemicals in this specially-formulated product adhere to metal surfaces to reduce internal wear and friction, giving you peace-of-mind and saving you costly repairs in the future. Treats up to 5 liters of engine oil and provides up to 30,000 miles of protection under normal driving conditions. *Note: Not suitable for use with wet clutch applications or limited slip differentials. Great for use in vehicles with high-pressure, cam-driven fuel pumps or engines making noise upon start-up.
Show More Show Less

PENTOFROST NF 50/50 Antifreeze / Coolant Prediluted / Premixed - 1 G...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Pentosin - Corporate Logo
T#:34181293
Part#: 8114308
In Stock
$ 20.99 USD
Free Shipping on orders $49 and up
Blue G11/G48 Coolant Pre-Mixed 50/50
BMW 0W-30 Engine Oil - 5 Liter
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Genuine BMW - Corporate Logo
T#:19197295
Part#: 83215A78F90
In Stock
$ 67.99 USD
Free Shipping on orders $49 and up
BMW's newest TwinPower Turbo engine oil is LL01 FE+ certified. It meets BMW's standards for LongLife 2001 ("LL01") and improved fuel economy ("FE+"). The new 0W30 replaces the previous 5W30 oil used in some 4-cylinder, 6-cylinder, and V8 BMW models. As of December 2015, BMW has not backdated the 0W30 for any other engines but the LL01 rating might indicate it will be the new approved oil for most engines (and replace #83212365946 5W30 oil).
Show More Show Less

Castrol React SRF Racing - 1 Liter
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Castrol - Corporate Logo
T#:809
Part#: SRF
In Stock
$ 118.02

This product was last offered at the strikethrough price on
01-08-2026

$ 96.99 USD
Free Shipping
$ 96.99 USD
Free Shipping
Silicone based synthetic DOT 4 brake fluid.
Boiling Point - Dry: 608 Degrees Fahrenheit / Wet: 518 Degrees Fahrenheit
Widely used in many types of racing including Formula One, V8 Supercar, and Superbike.
Show More Show Less

Liqui-Moly Oil Change Additive Package - Proline Engine Flush and MoS...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!
Liqui-Moly - Corporate Logo
T#:578655
Part#: MOS2FLUSHKT
In Stock
$ 28.99 USD
Free Shipping on orders $49 and up
This two-step kit features a flushing additive to be run through before the oil change and MoS2 for after new oil has been added.
Red Line 5W-40 Synthetic Engine Oil - 1 Gallon - BMW
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Redline - Corporate Logo
T#:4921478
Part#: 15405
In Stock
$ 69.99 USD
Free Shipping
$ 69.99 USD
Free Shipping
Red Line 5W40 synthetic motor oil. We have been using RedLine Oil in our street cars and race cars for years. Hands-down, it is the Number One brand of high-performance lubricant for BMWs. Red Line 5W40 engine oil provides for quicker lubrication and easier start-up. Reduces turbo lag and provides more power and economy in a properly functioning engine, while providing 25% thicker oil films than a petroleum 5W40 or 10W40.
Show More Show Less
Febi CHF 11S Hydraulic Power Steering Fluid - 1 Liter - BMW & MINI (G...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:363797
Part#: 83290429576
In Stock
$ 23.45

This product was last offered at the strikethrough price on
05-11-2026

$ 20.99 USD
Free Shipping on orders $49 and up
$ 20.99 USD
Free Shipping on orders $49 and up
CHF 11S is a synthetic high-performance hydraulic fluid for lifetime application in modern vehicle aggregates. CHF 11S is specially designed for hydraulics in the automotive industry with the highest technical requirements such as in: power steering, level control, shock absorber, hydro-pneumatic suspension, stability and traction control, hydraulics for convertible tops, central lock systems, etc. It is suitable for all extreme conditions and guarantees full performance from -40°C to over 130°C system temperature. Please check your owner's or service manual for correct application information. NOTE: For BMW applications, only use CHF 11S when a green sticker is clearly marked on the power steering reservoir cap, do not mix with standard ATF as this can cause issues with the power steering system.
Show More Show Less