BMW Suspension Parts for BMW 2 Series F23 (2015+)

ST XA Performance Coilover System - BMW F22/23 M235/M240i, F30/F32 33...

For vehicles without EDC

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5028765

Part#: 1822000F

In Stock at Vendor

$ 1,399.00 USD

Add to Wish List

Qty

$ 1,399.00 USD

Add to Wish List

With the adjustable dampers, you can influence more than just the ride height of your car. Whether your style is comfort or performance, with the ST XA Coilover you are in control of your driving dynamics. For all those who want to influence more than just their ride height. ST XA Coilovers deliver the look you need through a wide range of height adjustments. With an extensively adjustable damper setup, you can precisely adjust the driving behavior of your car to achieve enhanced road control without a compromise in comfort. ST manufactures the adjustable spring perch made of durable and friction-optimized polyamide composite material with a stainless steel insert. Thanks to the composite material, corrosion is prevented between the strut and perch ensuring long-lasting height adjustability while the stainless steel insert provides strength and confidence! ST XA Coilovers come preset to ST's factory-recommended damper settings, the same configuration tested on KW's shock dynos before they go into your box. The 16 distinct clicks of adjustable rebound damping allow you to refine the driving dynamics with a simple turn of the adjustment knob. Each kit includes a detailed damper setup manual making it easy to reset to our recommended setting at any time. Whether your preference is comfort, sportiness, or something in between; ST XA puts the finer details of the driving dynamics in your hands. Features: Front Lowering: 1.0" to 2.0" Rear Lowering: 1.2" to 2.2" Version: XA Damping adjustment: Rebound Damping Galvanized Coilover struts with additional coating for optimized corrosion protection Complete solution with adjustable spring plate, race spring system, and bumpers with dust protection Powerful twin-tube dampers with high-quality components for maximum longevity Externally adjustable damping 5 year limited warranty

Show More Show Less

ST X Performance Coilover Kit - BMW F22/23 M235/M240i, F30/F32 335/34...

For vehicles without EDC

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:210940

Part#: 90896

Ships in 4 Business Days

$ 1,089.00 USD

Add to Wish List

Qty

$ 1,089.00 USD

Add to Wish List

ST Suspensions has partnered with KW Suspensions in Germany to offer an affordable German-engineered coilover kit. The ST coil overs are based on the entry-level KW Variant 1 but with zinc-plated shock bodies in place of the more expensive stainless steel. Each ST coilover has dampers perfectly tuned for the springs included with the kit. It's a matched shock and spring package with the added feature of adjustable ride height. This delivers a comfortable but sporty and controlled ride without being jarring or uncomfortable. The engineering and performance is unbeatable at this price! The ST coilover kit is packed with features found on more expensive fully-adjustable coil overs

Show More Show Less

ST XTA Plus 3 Performance Coilover System - 3-Way Adjustable - BMW F2...

For vehicles without EDC

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5028763

Part#: 182022080D

Ships in 10 Business Days

$ 2,799.00 USD

Add to Wish List

Qty

$ 2,799.00 USD

Add to Wish List

From the factory, the XTA plus 3 Coilover kit is equipped with KW dampers that are adjustable in high- and low-speed compression as well as adjustable rebound damping. With 24 clicks of adjustment for each, high speed and low-speed compression damping, and 18 clicks of rebound adjustment, your suspension knows no limits. It doesn't matter if you bolt in an aftermarket roll cage, weld in a cage, modification to PU bushings upgrade to spherical bushing or changed wheel loads - the XTA plus 3 coilover has what it takes to keep your car dialed! Of course, the XTA plus 3 also includes a parts approval certificate, race springs, and aluminum unibal top mounts. Like all ST coilovers, the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XTA plus 3 coilovers due to the type of construction. The high-quality ST XTA plus 3 Coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protecting it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in ALL weather conditions.

Show More Show Less

ST XA Performance Coilover System - BMW F22/23 M235/M240i, F30/F32 33...

For vehicles with EDC

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5175683

Part#: 1822000G

In Stock at Vendor

$ 1,399.00 USD

Add to Wish List

Qty

$ 1,399.00 USD

Add to Wish List

With the adjustable dampers, you can influence more than just the ride height of your car. Whether your style is comfort or performance, with the ST XA Coilover you are in control of your driving dynamics. For all those who want to influence more than just their ride height. ST XA Coilovers deliver the look you need through a wide range of height adjustments. With an extensively adjustable damper setup, you can precisely adjust the driving behavior of your car to achieve enhanced road control without a compromise in comfort. ST manufactures the adjustable spring perch made of durable and friction-optimized polyamide composite material with a stainless steel insert. Thanks to the composite material, corrosion is prevented between the strut and perch ensuring long-lasting height adjustability while the stainless steel insert provides strength and confidence! ST XA Coilovers come preset to ST's factory-recommended damper settings, the same configuration tested on KW's shock dynos before they go into your box. The 16 distinct clicks of adjustable rebound damping allow you to refine the driving dynamics with a simple turn of the adjustment knob. Each kit includes a detailed damper setup manual making it easy to reset to our recommended setting at any time. Whether your preference is comfort, sportiness, or something in between; ST XA puts the finer details of the driving dynamics in your hands.

Show More Show Less

ST X Performance Coilover System - F22/F23 AWD

For vehicles without EDC

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:599115

Part#: 1322000Q

Ships in 4 Business Days

$ 1,089.00 USD

Add to Wish List

Qty

$ 1,089.00 USD

Add to Wish List

Designed in conjunction with KW Germany, ST X coilovers deliver a sporty handling by reducing the car’s bodyroll during compression as well as improving agility when driving fast. The high-quality production of each ST X coilover includes a low-friction and pressure resistant housing alongside a chrome-plated piston rod for maximum longevity. A mono block guide and ST seal package ensures the twin-tube dampers remain free of dirt particles in all weather conditions.

Show More Show Less

ST XTA Plus 3 Performance Coilover System - 3-Way Adjustable - BMW F2...

For vehicles with EDC

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5028764

Part#: 182022080E

Back Ordered

$ 2,799.00 USD

Add to Wish List

Qty

$ 2,799.00 USD

Add to Wish List

From the factory, the XTA plus 3 Coilover kit is equipped with KW dampers that are adjustable in high- and low-speed compression as well as adjustable rebound damping. With 24 clicks of adjustment for each, high speed and low-speed compression damping, and 18 clicks of rebound adjustment, your suspension knows no limits. It doesn't matter if you bolt in an aftermarket roll cage, weld in a cage, modification to PU bushings upgrade to spherical bushing or changed wheel loads - the XTA plus 3 coilover has what it takes to keep your car dialed! Of course, the XTA plus 3 also includes a parts approval certificate, race springs, and aluminum unibal top mounts. Like all ST coilovers, the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XTA plus 3 coilovers due to the type of construction. The high-quality ST XTA plus 3 Coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protecting it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in ALL weather conditions.

Show More Show Less

Adjustable Rear Upper/Inner Camber Bushings

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:600206

Part#: 193926-3H

Ships on Aug 6, 2026

$ 320.00 USD

Add to Wish List

Qty

$ 320.00 USD

Add to Wish List

Nearly every car manufactured in the modern era carries a dark secret – fully-adjustable suspension has been all but eliminated in the name of cost-cutting and assembly-line efficiency. What this means for you is increased tire wear and more frequent replacement, as a “full alignment” consists only of rudimentary toe-angle adjustment. For over forty years, K-MAC has been hard at work developing a solution to this problem with patented innovations in camber/caster plates and bushing kits, allowing easy adjustment and a true “full four-wheel alignment” to be performed by any competent shop. These bushings make camber adjustments possible for the first time, and improve the ability to complete toe angle adjustments. When used in conjunction with the K-MAC Camber and Toe kit and Rear Adjustable Trailing Arms allows full adjustability of the 5 multi-link rear arms and positive location. Bolt-on installation – insertion/extraction tube included! Easily adjusted on the car with basic hand tools Unique failsafe locking hardware – set & forget! High quality elastomer compound resists binding Hardened & nickel-chrome plated centers for maximum bushing life 2x the load area of stock bushings Spiral grease grooves

Show More Show Less

Adjustable Rear Upper/Inner Camber Bushings - BMW F22/23 F3X ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:16474811

Part#: 193926-9G

Special Order: No Guaranteed ETA

$ 320.00 USD

Add to Wish List

Qty

$ 320.00 USD

Add to Wish List

Nearly every car manufactured in the modern era carries a dark secret – fully-adjustable suspension has been all but eliminated in the name of cost-cutting and assembly-line efficiency. What this means for you is increased tire wear and more frequent replacement, as a “full alignment” consists only of rudimentary toe-angle adjustment. For over forty years, K-MAC has been hard at work developing a solution to this problem with patented innovations in camber/caster plates and bushing kits, allowing easy adjustment and a true “full four-wheel alignment” to be performed by any competent shop. These bushings make camber adjustments possible for the first time, and improve the ability to complete toe angle adjustments. When used in conjunction with the K-MAC Camber and Toe kit and Rear Adjustable Trailing Arms allows full adjustability of the 5 multi-link rear arms and positive location. Bolt-on installation – insertion/extraction tube included! Easily adjusted on the car with basic hand tools Unique failsafe locking hardware – set & forget! High quality elastomer compound resists binding Hardened & nickel-chrome plated centers for maximum bushing life 2x the load area of stock bushings Spiral grease grooves

Show More Show Less

KMAC Stage 2 Street/Track Front Adjustable Camber/Caster Plates - F22...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:389642

Part#: 192616-2N

Special Order: No Guaranteed ETA

$ 695.00 USD

Add to Wish List

Qty

$ 695.00 USD

Add to Wish List

Location: Front
Type: Street/Track, Stage 2
Upper spring perch: OEM-size, 60mm, and 2.5" included
Bearings: urethane OEM-type center bushing; lubricated radial thrust bearing on spring perch

KMAC camber/caster plates use a patented adjustment method designed for easy and rapid alignment adjustments. The KMAC design has a 'floating' inner camber plate, rather than slotted, to allow camber and caster to be adjusted together. To adjust, simply loosen the top three nuts on the strut tower and position the KMAC mount to match your desired alignment settings. The KMAC design allows more camber and caster adjustment because separate caster hardware is eliminated. While primarily designed to increase negative camber for track use these can also be used to fix alignment issues that cause uneven tire wear or unwanted handling behavior.

KMAC camber kits are the most complete kits on the market, with all of the common spring perch options and strut hardware included. The OEM size spring perch as well as 60mm and 2.5" spring isolators are included which makes it easy to upgrade from stock struts to coil overs without having to buy new camber plates. Or swap springs on your coil overs between 60mm and 2.5" without buying additional upper perches. Also included are the most common strut pin hardware - 14mm lower bearing adapters and 12x1.5, 12x1.75, and 14x1.5 top nuts. This takes the guesswork out of ordering the correct hardware for your strut type. The urethane main bushing is also replaceable and the camber plate parts are made from 7075-grade aluminum for a lifetime of camber plate use.

Fitment Note 1: replaces factory BMW strut mount with 3 mounting bolts (up to 12/2014 prodution). Not for cars with 5-bolt strut mounts.

Fitment Note 2: suspensions vary from manufacturer to manufacturer. The proper stacked height and clearances are required. K-MAC includes bearing adapters, spacers, and various top nuts but it is still the responsibility of the installer to ensure a correct and safe fitment. Basic instructions are included but professional installation is required. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
-12/2014 F22 BMW 228i 228i xDrive M235i M235i xDrive
2012-12/2014 F30 BMW 320i 320i xDrive 328d 328d xDrive 328i 328i xDrive 335i 335i xDrive - Sedan
2013-12/2014 F31 BMW 328i xDrive 328d xDrive - Wagon
-12/2014 F34 BMW 328i xDrive GT, 335i xDrive GT - Gran Tourismo
2013-12/2014 F32 BMW 428i 428i xDrive 435i 435i xDrive - Coupe
2013-12/2014 F33 BMW 428i Convertible 428i xDrive Convertible 435i Convertible - Convertible
-12/2014 F36 BMW 428i Gran Coupe 428i xDrive Gran Coupe 435i Gran Coupe 435i xDrive Gran Coupe
Not for cars with Adaptive M Suspension option code S2VFA

Show More Show Less

Adjustable Front Camber Bushings - F2X & F3X

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:404062

Part#: 193616-8H

Special Order: No Guaranteed ETA

$ 320.00 USD

Add to Wish List

Qty

$ 320.00 USD

Add to Wish List

Upgrade your BMW's suspension system with K-MAC's innovative Camber/Caster Plates and Bushing Kits.

Combat increased tire wear and frequent replacements caused by limited adjustability with these patented solutions. For over forty years, K-MAC has been pioneering fully-adjustable suspension components, allowing for precise camber adjustments and toe angle corrections, resulting in a true "full four-wheel alignment."

Patented camber/caster plates and bushing kits for precise alignment
Allows easy adjustment for a full four-wheel alignment
Bolt-on installation with insertion/extraction tube included
Easily adjusted on the car with basic hand tools
Unique failsafe locking hardware ensures settings remain secure
High-quality elastomer compound resists binding for longevity
Hardened & nickel-chrome plated centers for maximum bushing life
Spiral grease grooves for improved lubrication

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Suspension Parts for BMW 2 Series F23 (2015+)

Sub-Categories

ST XA Performance Coilover System - BMW F22/23 M235/M240i, F30/F32 33...

ST X Performance Coilover Kit - BMW F22/23 M235/M240i, F30/F32 335/34...

ST XTA Plus 3 Performance Coilover System - 3-Way Adjustable - BMW F2...

ST XA Performance Coilover System - BMW F22/23 M235/M240i, F30/F32 33...

ST X Performance Coilover System - F22/F23 AWD

ST XTA Plus 3 Performance Coilover System - 3-Way Adjustable - BMW F2...

Adjustable Rear Upper/Inner Camber Bushings

Adjustable Rear Upper/Inner Camber Bushings - BMW F22/23 F3X ...

KMAC Stage 2 Street/Track Front Adjustable Camber/Caster Plates - F22...

Adjustable Front Camber Bushings - F2X & F3X

Upgrade your BMW's suspension system with K-MAC's innovative Camber/Caster Plates and Bushing Kits.

Select Vehicle

Category

Brand

Price

Shipping

Narrow Results