BMW Suspension Parts for BMW 2 Series F23 (2015+)

Looking to improve the handling characteristics of your BMW? The 034Motorsport Dynamic+ sway bar kit aims to do exactly that. These sway bars feature 3-way (front) and 2-way (rear) adjustability for infinite tailoring to suit your preferred stiffness. Constructed of high-grade spring steel, these bars are built with rigidity and durability in mind. Together, these front and rear sway bars provide reduced body roll, increased turn-in, reduced understeer, and enhanced steering feel.

2-way adjustability: Can be set to either 315% or 390% stiffer compared to 340i M-Sport sway bar Diameter: 22mm Material: Constructed from solid spring steel Finish: Black powder coat for corrosion resistance Reduces understeer and rear body roll Enhances turn-in rotation

Introducing the revolutionary Air Lift Performance 3H Height + Pressure Air Suspension Control System for BMW enthusiasts from Turner Motorsport. After three years of meticulous development and testing, Air Lift has created their most advanced product yet.

• Combines pressure-based control with ride-height sensing technology for enhanced performance
• Features a brilliant TFT color display for intuitive control and monitoring
• Mobile app compatibility allows for easy adjustment of ride height and system settings via Bluetooth
• State-of-the-art manifold with a 32-bit processor for precise control over all four corners of your BMW
• Improved height sensor arm design for increased durability and longevity
• Show mode feature enables height management while the vehicle is off

Kit Features:

• Height + Pressure 3/8" Manifold
• Air Lift Black Anodized Aluminum Display
• Fully Integrated Wiring Harness That Also Incorporates Compressor Power
• Necessary Fittings, Hardware, and Connectors For a Complete Install
• Air Lift Automatically Draining Water Trap
• 60ft of 3/8" Air Line
• 3H Includes Rotational Height Sensors, Wiring, and Linkages
• FREE Smart Phone App Which Works on Both iPhone and Android Integrated Into the Manifold, No Extra Module to Buy! Both Iphone and Android app are currently available

Dinan sway bars are carefully engineered to match the driving dynamics of each BMW chassis. Dinan's research and development finds the ideal balance between improved handling while maintaining a comfortable ride. This set has been fine-tuned for the AWD Xi F22 and F30-F36 chassis to reduce bodyroll, improve steering and turn-in response, and reduce understeer. Both front and rear bars are hollow tubular steel for light weight with adjustable ends to dial in the handling characteristics. These are the same sway bars used in Dinan's Stage 1 suspension and work best with Dinan shocks and springs or a similar sport suspension and wider rear tires.

Dinan F3X AWD Sway Bar Specs:
F: 25mm, hollow, 3-position adjustable, urethane bushings and brackets included
R: 19mm, hollow, 3-position adjustable, urethane bushings and brackets included

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. Each sway bar is worth 1 point towards your Dinan badge.

This item fits the following BMWs:
2014+ F22 F23 BMW 228iX M235iX
2012+ F30 BMW 328i X-Drive 335i X-Drive - Sedan
2012+ F31 BMW 328i X-Drive - Touring Wagon
2012+ F32 BMW 428i X-Drive 435i X-Drive - Coupe
2013+ F33 BMW 428i X-Drive 435i X-Drive - Convertible
2012+ F34 BMW 328i X-Drive 335i X-Drive - Gran Turismo
2012+ F36 BMW 428i X-Drive 435i X-Drive - GranCoupe

Looking to improve the handling characteristics of your BMW? The 034Motorsport Dynamic+ sway bar kit aims to do exactly that. These sway bars feature 3-way (front) and 2-way (rear) adjustability for infinite tailoring to suit your preferred stiffness. Constructed of high-grade spring steel, these bars are built with rigidity and durability in mind. Together, these front and rear sway bars provide reduced body roll, increased turn-in, reduced understeer, and enhanced steering feel.

3-way adjustability: 62%, 72%, or 85% stiffness over factory 340i M-Sport sway bar Diameter: 30mm Construction: Hollow with thicker walls compared to the 340i M-Sport sway bar Finish: Black powder-coat for corrosion resistance Reduces front body roll Increases front grip and steering directness

The SPL BMW F2X/F3X Front Lower Control Arms (FLCA) provide roll center, camber, and track width adjustment for the rear wheel drive (RWD) F2X/F3X BMWs while eliminating bushing deflection resulting in sharpened steering response and driving precision.

Negative Camber Benefits

The ability to run more negative camber greatly improves the peak lateral grip available. Adding negative camber results in the tire having an optimal contact patch as the body rolls due to cornering forces. This is especially important with better tires and a must-have for anyone looking to prevent excessive outer shoulder wear (and heating) on their tires due to a lack of camber.

Wider Front Track Width Benefits

Further handling improvements can be had by increasing the front track width from the factory 60.5" (F3X) or 59.9" (F2X) to be closer to the M3's 62.2". If you applied the M3's width to the M340i it would reduce the outer front tire loading by roughly 20 lbs and apply it to the inner front tire. The result would be greater peak grip (~0.04G), improved stability, and faster lap times.

Roll Center Correction Benefits

Lowering the F2X/F3X results in a greater distance between the front roll center and the center of gravity. This acts like a longer lever, creating more body roll, bumpsteer, and requiring additional static camber angle to maintain the same handling. The SPL front lower control arms allow the roll center to be corrected for a wide range of ride heights to improve handling and stability.

The lower control arms come with a ride height sensor bracket to maintain the factory ride height sensor location, regardless of length of the arm to keep those finicky BMW chassis electronics happy.

Benefits

Adjustable Camber, Roll Center, and Track Width

Eliminates Bushing Deflection

Improved Tire Life with Ideal Camber Settings

Lightweight, High-Strength Construction

Stackable 304SS Roll Center Spacers in 1/8" and 1/4" Sizes

US Made, PTFE Lined FK Rod Ends 

Materials

6061-T6 aluminum black anodized arm, clamps, and spacers

4130 CrMo electroless nickel-plated double adjuster

Ti6Al4V titanium socket head cap screws

304 stainless steel roll center and knuckle spacers

5/8" 4140 CrMo stud

FK PTFE-lined spherical bearings (F1 spec, self-cleaning)

Suitable for all uses, from daily driver to race car.

Air Lift proudly introduces the revolutionary Air Lift Performance 3P pressure-based air suspension control system after three years of extensive development and testing. This system represents the pinnacle of their innovation.

Air Lift Performance 3P amalgamates pressure-based control with optional ride-height sensing technology, leveraging the advantages of both systems to instantly enhance suspension control, performance, and ride flexibility.

Key Specifications:

• Controller: Features a vibrant TFT color display with adjustable backlight, illuminated preset buttons, and full-color indicators for tank pressure, 4-corner active height, and pressure readings. It's encased in a black anodized CNC machined case, allowing customized mounting options with a Micro-USB port for power.
• Mobile App: Works seamlessly with the free mobile app, enabling Bluetooth-based ride height and system settings adjustments. Additionally, the app facilitates direct system software updates to the manifold and controller.

Kit Features:

• Pressure-based 1/4" Manifold
• Black Anodized Aluminum Display

Control arms are some of the most crucial components on a BMW suspension. The control arms literally control the wheel and suspension as they go through their range of motions. A faulty or worn control arm or ball joint is a very dangerous and potentially life-threatening problem so make sure they are inspected and replaced at regular intervals. For a street-driven car we advise yearly inspection and a full replacement every 3-4 years. For track-driven cars these should be inspected before every event and replaced every two years.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Genuine BMW Tension Strut With Hydraulic Mount,Right -
This item fits the following BMW Chassis:
F30,F31,F32,F33,F36

Over the years, the road takes a serious toll on your suspension. Pot holes, speed bumps, and road hazards all contribute to a sloppy, weak suspension. To give a better feel to your driving experience, change components as they wear to improve safety and ride comfort.

One item to replace is the control arm. After years of service, the non-serviceable ball joints and other components can begin to wear out causing the steering to not feel as tight, as well as steering wobble and clunking when turning.

This kit is an upgrade for non-M cars, adding 0.5 degrees of camber to the front, and replacing your headlight sensors with the proper BMW parts to complete the upgrade.

Upgrade your BMW's suspension system with K-MAC's innovative Camber/Caster Plates and Bushing Kits.

Combat increased tire wear and frequent replacements caused by limited adjustability with these patented solutions. For over forty years, K-MAC has been pioneering fully-adjustable suspension components, allowing for precise camber adjustments and toe angle corrections, resulting in a true "full four-wheel alignment."

• Patented camber/caster plates and bushing kits for precise alignment
• Allows easy adjustment for a full four-wheel alignment
• Bolt-on installation with insertion/extraction tube included
• Easily adjusted on the car with basic hand tools
• Unique failsafe locking hardware ensures settings remain secure
• High-quality elastomer compound resists binding for longevity
• Hardened & nickel-chrome plated centers for maximum bushing life
• Spiral grease grooves for improved lubrication