Free Shipping on orders $99 and up! Some exclusions apply. Contiguous US only.

BMW F23 Fuel System Parts

BMW F23 Fuel System Parts Looking for a BMW fuel pump, BMW gas cap or other BMW fuel system related items? You've found the right place. Your BMW fuel delivery system is a critical system, and any failure can rended your BMW dead in the water. Whether your fuel pump has stopped pumping, a fuel injector is clogged or not spraying, or your gas cap is either lost or not properly sealing, we likely have what you are looking for. We stock thousands of BMW fuel system parts so if you don't see what you are looking for, just give us a call.
You're currently viewing parts for your (F23) 2-Series Convertible 2014+. Reset your chassis
For accurate results, specify your model below.
Genuine BMW Fuel Tank Ventilation Valve This part has been superseded to BMW Part 13902366609
Genuine BMW
Part #: 13907636156
Price: $92.45 (USD) 
$106.89 (14% off MSRP)
Ships in 5 days
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Fuel-It! Stage 3 LPFP Upgrade - N55 F-Series

This is a complete Low-Pressure Fuel Pump (LPFP) upgrade that replaces your stock LPFP assembly with a new E85 certified one.  This solution provides up to 300% more flow than stock and this assembly can be purchased one of three ways to meet your needs.

  • Trade-in: (Domestic and Canada)
    • This option allows you to receive a rebuilt/upgraded stock bucket with two new Walbro 450 pumps, filters, and fittings to swap out your stock LPFP assembly and requires a $150 *core deposit.
  • Trade-in: (Euro)
    • This option allows you to receive a rebuilt/upgraded stock bucket with two new Walbro 450 pumps, filters, and fittings to swap out your stock LPFP assembly and requires a $300 *core deposit.
  • New Build:
    • This option includes a new VDO LPFP bucket that is upgraded with new Walbro 450 pumps, filters, and fittings.  No core deposit required but is eligible for a core refund of $50 should you elect to return your *stock bucket. (US Spec only)

All three options include the following:

  • A complete plug and play solution by simply replacing your stock bucket.  However, to utilize the secondary, an additional wiring harness must be installed.
  • Two new E85 compatible Walbro 450 pumps
  • Two new Walbro filters
  • A custom fitting that is tuned to optimize the venturi and pump output
  • Spare vent tube clip
  • Wiring harness for the secondary
  • Flow testing prior to shipping
  • Recommended Accessories:
    • Lock Ring Removal Tool
    • Return line fitting
      • This option is for those customers that will be running an external fuel pressure regulator (FPR).  You will need this to install your return line from the FPR to the tank.
    • Hobb's Switch
      • This option is for those customers that will be using a boost referenced switch to trigger the secondary on their Stage 3 pump. 

LEASE CONTACT US WITH ANY QUESTIONS YOU HAVE at info@fuel-it.com!

*To be eligible for a core return, the bucket must be completely stock and undamaged. (Pump itself does not have to be functioning)

-Due to the different configurations available for Stage 3, these kits will be built after the order is placed and will ship within 3 business days.

- All Stage 3 assemblies are stock buckets that have been rebuilt and may show signs of being disassembled and rebuilt.  They are all flow tested and verified before being shipped.

 

Fuel-It!
Part #: BMW-S3LPFP-FXX
Price: $949.95 (USD) 
Direct Ship
Quantity:   
Genuine BMW High Pressure Fuel Pump (Latest Design) - F22, F3X This is the latest Genuine BMW high pressure fuel pump (HPFP) for the N20/N26 and N55 engines found in the F22 2-series and F3X 3/4-series. BMW has made several revisions to the HPFP to fix 'Drivetrain Malfunction' faults, stalling, stumbling, and other drivability issues. When these pumps fail the car immediately goes into limp mode. The failure has little to no warning and can happen even while driving. The car may not restart or if it does the engine will run extremely rough. The previous BMW part numbers for this pump were 16117297778 and 16117414482. Those have been discontinued for this latest version which is supposed to be a better design.

This item fits the following BMWs:
2014+ F22 BMW 228i 228iX M235i M235iX
2012+ F30 BMW 320i 320iX 328i 328iX 335i 335iX - Sedan
2012+ F31 BMW 328i 328iX - Wagon
2014+ F34 BMW 328i 328iX 335iX - Gran Turismo
2014+ F32 BMW 428i 428iX 435i 435iX - Coupe
2014+ F33 BMW 428i 428iX 435i 435iX - Convertible
2014+ F36 BMW 428i 428iX 435i 435iX - Gran Coupe
Genuine BMW
Part #: 16117243975
Price: $339.12 (USD) 
$418.40 (19% off MSRP)
Ships in 5 days
Free Shipping Free Shipping
Quantity:   
Non Fuel-It! PI To Tank With Ethanol Sesnor And Raw Signal Analyzer

New from Fuel-It!, a complete fueling solution for those looking to run ethanol or an E85 blend. This kit comes complete with upgraded replacement fuel lines to support use with E85. It also adds an ethanol sensor which allows you to know your fuel blend at all times. This means you get the perfect mix for you tune, giving you a more enjoyable ride. The sensor operates using a bluetooth analyzer sending data directly to your phone. 

Available in two options: 

  • A 0-5 volt analog output that integrates with the JB4, analog gauge, or any other ECU or tuner that supprts 0-5 volt input.
  • A 50-150hz raw signal straight from the ethanol sensor to support those tuners that utilize that signal.

To fully be able to operate this system, the Fuel-It! app is required. Available for Android or Apple.

Fuel-It!
Part #: BMW-N55FFK-PITR
Price: $585.95 (USD) 
Direct Ship
Quantity:   
Fuel-It! Port Injection To Tank With Ethanol Sensor And Analog Signal Analyzer

New from Fuel-It!, a complete fueling solution for those looking to run ethanol or an E85 blend. This kit comes complete with upgraded replacement fuel lines to support use with E85. It also adds an ethanol sensor which allows you to know your fuel blend at all times. This means you get the perfect mix for you tune, giving you a more enjoyable ride. The sensor operates using a bluetooth analyzer sending data directly to your phone. 

Available in two options: 

  • A 0-5 volt analog output that integrates with the JB4, analog gauge, or any other ECU or tuner that supprts 0-5 volt input.
  • A 50-150hz raw signal straight from the ethanol sensor to support those tuners that utilize that signal.

To fully be able to operate this system, the Fuel-It! app is required. Available for Android or Apple.

Fuel-It!
Part #: BMW-N55FFK-FPITA
Price: $575.95 (USD) 
Direct Ship
Quantity:   
HPFP To Fuel Tank With Ethanol Sensor And Raw Signal Analyzer

New from Fuel-It!, a complete fueling solution for those looking to run ethanol or an E85 blend. This kit comes complete with upgraded replacement fuel lines to support use with E85. It also adds an ethanol sensor which allows you to know your fuel blend at all times. This means you get the perfect mix for you tune, giving you a more enjoyable ride. The sensor operates using a bluetooth analyzer sending data directly to your phone. 

Available in two options: 

  • A 0-5 volt analog output that integrates with the JB4, analog gauge, or any other ECU or tuner that supprts 0-5 volt input.
  • A 50-150hz raw signal straight from the ethanol sensor to support those tuners that utilize that signal.

To fully be able to operate this system, the Fuel-It! app is required. Available for Android or Apple.

Fuel-It!
Part #: BMW-N55FFFK-HTR
Price: $485.95 (USD) 
Direct Ship
Quantity:   
HPFP To Fuel Tank With Ethanol Sensor And Analog Signal Analyzer

New from Fuel-It!, a complete fueling solution for those looking to run ethanol or an E85 blend. This kit comes complete with upgraded replacement fuel lines to support use with E85. It also adds an ethanol sensor which allows you to know your fuel blend at all times. This means you get the perfect mix for you tune, giving you a more enjoyable ride. The sensor operates using a bluetooth analyzer sending data directly to your phone. 

Available in two options: 

  • A 0-5 volt analog output that integrates with the JB4, analog gauge, or any other ECU or tuner that supprts 0-5 volt input.
  • A 50-150hz raw signal straight from the ethanol sensor to support those tuners that utilize that signal.

To fully be able to operate this system, the Fuel-It! app is required. Available for Android or Apple.

Fuel-It!
Part #: BMW-N55FFK-HTA
Price: $485.95 (USD) 
Direct Ship
Quantity:   
Non Fuel-It! PI To Tank With Ethanol Sesnor And Analog Signal Analyzer

New from Fuel-It!, a complete fueling solution for those looking to run ethanol or an E85 blend. This kit comes complete with upgraded replacement fuel lines to support use with E85. It also adds an ethanol sensor which allows you to know your fuel blend at all times. This means you get the perfect mix for you tune, giving you a more enjoyable ride. The sensor operates using a bluetooth analyzer sending data directly to your phone. 

Available in two options: 

  • A 0-5 volt analog output that integrates with the JB4, analog gauge, or any other ECU or tuner that supprts 0-5 volt input.
  • A 50-150hz raw signal straight from the ethanol sensor to support those tuners that utilize that signal.

To fully be able to operate this system, the Fuel-It! app is required. Available for Android or Apple.

Fuel-It!
Part #: BMW-N55FFK-PITA
Price: $585.95 (USD) 
Direct Ship
Quantity:   
Fuel-It! Port Injection To Tank With Ethanol Sensor And Raw Signal Analyzer

New from Fuel-It!, a complete fueling solution for those looking to run ethanol or an E85 blend. This kit comes complete with upgraded replacement fuel lines to support use with E85. It also adds an ethanol sensor which allows you to know your fuel blend at all times. This means you get the perfect mix for you tune, giving you a more enjoyable ride. The sensor operates using a bluetooth analyzer sending data directly to your phone. 

Available in two options: 

  • A 0-5 volt analog output that integrates with the JB4, analog gauge, or any other ECU or tuner that supprts 0-5 volt input.
  • A 50-150hz raw signal straight from the ethanol sensor to support those tuners that utilize that signal.

To fully be able to operate this system, the Fuel-It! app is required. Available for Android or Apple.

Fuel-It!
Part #: BMW-N55FFK-FPITR
Price: $575.95 (USD) 
Direct Ship
Quantity:   
Genuine BMW High Pressure Fuel Pump with Fuel Filter - N55 - 135i, 335i, 535i This is the updated high pressure fuel pump for BMW's with the N55 turbo engine.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
3/2012-2013 E82 BMW 135i 135is
2014+ F22 BMW M235i M235i xDrive
2014+ F23 BMW M235i
3/2012-2013 E92 BMW 335i 335xi 335i xDrive - Coupe
3/2012-2013 E93 BMW 335i - Convertible
2012+ F30 BMW 335i 335i xDrive - Sedan
2013+ F32 BMW 435i 435i xDrive - Coupe
2013+ F33 BMW 435i Convertible 435i xDrive Convertible- Convertible
2014+ F34 BMW 335i xDrive GT - Gran Tourismo
2014+ F36 BMW 435i Gran Coupe 435i xDrive Gran Coupe
3/2012-+ F07 BMW 535i GT, 535i xDrive GT
3/2012-3/2012+ F10 BMW 535i 535i xDrive
3/2012+ F12 BMW 640i 640i xDrive
2013+ F06 BMW 640i Gran Coupe 640i xDrive Gran Coupe
3/2012-+ F01 BMW 740i 740li 740li xDrive
2013+ E84 BMW X1 xDrive35i
4/2012-2013 E70 BMW X5 xDrive35i
4/2012-2013 E71 BMW X6 xDrive35i br>2014+ F15 BMW X5 sDrive35i X5 xDrive35d X5 xDrive35i X5 xDrive50i
2015+ F16 BMW X6 sDrive35i X6 xDrive35i X6 xDrive50i
4/2012+ F25 BMW X3 xDrive28i X3 xDrive28d X3 xDrive35i
2015+ F26 BMW X4 xDrive28i X4 xDrive35i
Genuine BMW
Part #: 13518604231
Price: $91.24 (USD) 
$104.48 (13% off MSRP)
Back Ordered, Contact Us
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Fuel-It! Low Pressure Fuel Pump Upgrade Stage 2 - N55 F-Series

This is a complete Low Pressure Fuel Pump (LPFP) upgrade that replaces your stock LPFP assembly with an E85 certified one.  This assembly can be purchased one of three ways to meet your needs.

  • Trade-in:
    • This option allows you to receive a rebuilt stock bucket with a new Walbro 450 pump to swap out your stock LPFP assembly and requires a $300 *core deposit.
  • New Build:
    • This option includes a new BMW LPFP bucket that is upgraded with a new Walbro 450 pump, filter, and fittings.  No core deposit required but if you send back your stock core we will refund $100 of your original purchase price.
       
  • Both options include the following:
    • A complete plug and play solution by simply replacing your stock bucket
    • A new E85 compatible Walbro 450 pump that flows 50% more fuel than stock
    • Upgraded fuel lines from the pump to the filter and to the regulator
  • Recommended Accessories:
    • Lock Ring Removal Tool
  • Compatible with the following vehicles:
    • 1' F20 (07/2010 — 02/2015)
    • 1' F20 LCI (05/2014 — 06/2016)
    • 1' F21 (07/2010 — 02/2015)
    • 1' F21 LCI (06/2014 — 06/2016)
    • 2' F22 (10/2012 — 06/2016)
    • 2' F87 M2 (11/2014 — 06/2017)
    • 2' F87 M2 LCI (09/2016 — 04/2017)
    • 2' F23 (03/2014 — 06/2016)
    • 3' F30 (02/2011 — 01/2016)
    • 3' F30 LCI (10/2014 — 07/2017)
    • 3' F31 (07/2011 — 06/2015)
    • 3' F31 LCI (12/2014 — 06/2016)
    • 3' F34 GT (07/2012 — 06/2016)
    • 4' F32 (11/2012 — 01/2017)
    • 4' F33 (03/2013 — 02/2017)
    • 4' F36 Gran Coupé (07/2013 — 12/2016)

 NOTE:  Owners with I-Drive may get a Fuel pump warning on the screen that says "Continued driving is possible.  Have the system checked by your BMW center as soon as possible."  As long as the car is running fine and does not exhibit any other symptoms, there is not an issue with the pump and this can be ignored.  If you have any questions about this please feel free to contact us. 

Fuel-It!
Part #: FILPFPK5
Price: $718.95 (USD) 
Direct Ship