Select Vehicle
BMW
Mini
Please ensure your correct model is selected
The stock center support bearing carrier is engineered to minimize noise, vibration, and harshness (NVH) in the cabin by loosely securing the center bearing with a soft rubber bushing. However, this design allows the driveshaft to move off-center during launches and shifts, reducing throttle response and causing drivetrain oscillations. Over time, the rubber bushing can sag or dry rot, leading to misalignment of the driveshaft.
Prevent or fix this common problem with JXB Performance's Driveshaft Center Support Bearing Upgrade! This upgrade features a simple yet highly effective 2-piece design that makes installation and bushing replacement effortless. The stock carrier is cut away, and the JXB bushings securely "clamp" the driveshaft bearing in place, ensuring constant driveshaft alignment.
The Street bushing option from JXB is the most popular choice, offering a significant improvement over the stock design while keeping NVH levels minimal.
Note: Some light NVH, such as a soft hum, may occur at certain speeds. However, with a modified exhaust or open windows, it’s unlikely to be noticeable.
Installation is straightforward and doesn’t require removing the driveshaft. The 2-piece design clamps directly onto the OEM bearing, though removing the old carrier will require a cutting tool.
Need replacement or additional bushings? See T#4799658 for replacement street bushings.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
11-15-2026
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
11-15-2026
This product was last offered at the strikethrough price on
11-15-2026
This product was last offered at the strikethrough price on
11-15-2026
This kit from Active Autowerke replaces the weak plastic charge pipe with a new aluminum part, secured with a high-quality silicone couple. When you're building a high-powered turbocharged engine, or even just looking for peace of mind on a stock application, durability modifications are just as important - if not more important - than adding power. If your charge pipe fails, it results in a huge vacuum leak that sends your ECU into limp mode, diminishing performance significantly. Don't wait - upgrade your charge pipe today!
This product fits the following BMWs:
2016+ F87 M2
2014+ F22 M235i
2012+ F30 335i
2014+ F32 / F33 / F36 435i
This product was last offered at the strikethrough price on
11-15-2026
This product was last offered at the strikethrough price on
11-15-2026
This product was last offered at the strikethrough price on
11-15-2026
This product was last offered at the strikethrough price on
11-15-2026
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
11-15-2026
For over 30 years, Active Autowerke has been the one to turn to for high-quality BMW performance products. Committed to enhancing the performance of BMWs through the highest quality products is what Active Autowerke is all about.
The B46 downpipes are strategically engineered to virtually eliminate the immensely restrictive characteristics of the factory downpipes – therefore reducing radiant heat and increasing performance.
Features Include
NO CEL when using this downpipe
GESI EPA registered high flow and fully OBD2 compliant
Casted upper stainless steel V-Band for precise fitment
3 inch diameter piping allows for maximum power output
Quicker turbo spool
Rated for 500 to 850 hp applications
Withstands up to 1500° F
Can reach operational efficiency within 9 seconds of startup
Easily bolts-on – no cutting or welding required
Durable construction from TIG welded 304 stainless steel
Ultra high flow 400 cell per square inch catalyst
EPA certified for use on OBD2 vehicles (1996 and newer) except in California
304 stainless steel substrate in catalytic converter is furnace braised to the mantle for outstanding durability
GESi® proprietary precious metal loading technology ensures greatly reduced emissions
Both passengers and drivers are safe from harmful emissions and noise
Precise fitment
Made in Miami, Florida
Covered by 5 Year / 50,000 Mile Warranty (on shell and tube ends)
FITMENT NOTE: For G-Chassis models (G20, G22), the cutoff build date of 08/2020 is important as cars produced after that date have a downpipe with different bracket locations. Cars with a build date of 08/2020 and earlier have the brackets in a V configuration. Cars with a build date of 09/2020 and later have the brackets in a straight line and require Active Autowerke p/n 11-065G
This product was last offered at the strikethrough price on
11-15-2026
This product was last offered at the strikethrough price on
11-15-2026
The Active Autowerke BMW F30 328I signature exhaust is located in a class all of its own. This product is a must for any enthusiast searching for true performance, added durability and an attractive weight advantage when it comes to the F30 328I performance signature exhaust.
This system is constructed from 100% polished 304-stainless steel and features adjustable 80 mm double walled tips, making it ideal both for two-door and four-door models (which also allows for cleaner fitment with diffusers).
This BMW F30 exhaust delivers everything we know you would want in a performance exhaust: eye-catching style, a sophisticated yet aggressive tone, weight savings, and – most importantly – measurable horsepower performance gains!
This muffler turns your 328I exhaust tone into a sporty but mellow tone that is not only exhilarating but non obtrusive on your ears.
The factory counterpart weighs 29 lbs. while the Active Autowerke Signature exhaust weighs only a mere 19 lbs. Weight savings are not the only attributes, this 328I performance exhaust has a modular design with its v-band clamps that makes fitment a snap. A revelation in BMW tuning.
On the in-house Active Autowerke Mustang dyno, their otherwise 100% stock 2013 328I test mule spun the rollers to the tune of an extra 9 RWHP, and 13 LB-FT of torque…from “just” a quality muffler upgrade.
Turbos love to exhale, and we are very anxious to continue to unearth just how much extra power is hiding in the stock exhaust system.
FEATURES:
NOTE:
Fits F30 BMW 228i and 328i models with the N20 engine.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
11-15-2026
This product was last offered at the strikethrough price on
11-15-2026
This product was last offered at the strikethrough price on
11-15-2026
This product was last offered at the strikethrough price on
11-15-2026
This product was last offered at the strikethrough price on
11-15-2026
This product was last offered at the strikethrough price on
11-15-2026
This product was last offered at the strikethrough price on
11-15-2026
This product was last offered at the strikethrough price on
11-15-2026
This product was last offered at the strikethrough price on
11-15-2026
This product was last offered at the strikethrough price on
11-15-2026
This product was last offered at the strikethrough price on
11-15-2026
This product was last offered at the strikethrough price on
11-15-2026
This product was last offered at the strikethrough price on
11-15-2026