BMW Performance Chips & Software for BMW 3 Series F30 (2012+)

Introducing the latest and greatest Wireless connection method for your BMW F and G series vehicles and the 2020+ Toyota Supra, the all-new bootmod3 Wireless Adapter.

bootmod3 WiFi adapter is fully designed in-house by our engineers, built with the highest quality parts and a modern chipset. It achieves perfect reliability and is the quickest adapter currently offered on the market.

Features:

• Fastest flash times over ENET and CANBUS
• Reliable and consistent connectivity
• Ability to configure your own WiFi password.
• 
  
  • Most if not all other WiFi OBD adapters leave open WiFi access to your OBD port which is a security issue for your vehicle. With bootmod3 you can set/change to your own custom WiFi password securing access.
• Wireless ENET support for BMW F and G series vehicles and 2020+ Toyota Supra
• Wireless CANBUS Support
  • Unlike generic WiFi adapters, our adapter allows full flashing of transmission on GEN2 BMW and 2020+ Toyota Supra removing the need for additional WiFi adapters or DCAN cables
• NO ALARMS if left plugged in (BMW G series vehicles and Toyota Supra)
  • Enters ultra-low power mode if left plugged in consuming just ~20mA
• OTA updates through the new bootmod3 app
• Firmware fully extensible for additional flash and diagnostic protocols for future connectivity support
• Manual Toggle switch to fully power down the adapter
• Small form factor, considerably smaller than generic WiFi ENET adapters
• No VIN locking, can be used on multiple vehicles

Vehicles Supported:

• All BMW F and G series vehicles
• 2014+ Mini
• 2020+ Toyota Supra (A90 A91)

Supported 3rd Party Applications:

• OEM factory diagnostics such as ISTA and ESYS
• XHP App
• Bimmercode App
• Bimmerlink App
• ProTool App
• ...and other apps requiring ENET and UDS to CANBUS support

When connected on iOS, copy your WiFi settings from Automatic to Manual and leave the Router field empty. This leaves your Mobile data connection active while connected with the vehicle.

Some items used and/or installed by PRO TUNING FREAKS may void portions of your vehicle’s factory warranty. Some items may not be legal for “on highway use”. PRO TUNING FREAKS makes no guarantees to the legality of any parts used for “on highway vehicles” and accepts no responsibility for compliance with the vehicle’s factory warranty.

BMW B46 B48 B58 Motiv ReFlex 0-10 Bar Pressure Sensor is designed for accurate measurement of fluid and air pressure in high-performance applications. Ideal for monitoring a variety of pressures including fuel, boost, coolant, and oil, this sensor provides crucial data for optimizing vehicle performance.

Featuring a 2-Pin DTM connector, this sensor offers a direct plug-and-play connection to the ReFlex+ harness, ensuring a seamless integration with flash platforms via CANbus. Each ReFlex+ unit can support up to two of these sensors, allowing for comprehensive monitoring.

• Versatile Measurement: Capable of measuring fuel pressure, boost, coolant, oil, and other fluids.
• Easy Integration: 2-Pin DTM connector provides a direct plug-and-play connection.
• Comprehensive Monitoring: Supports integration of up to two sensors per ReFlex+ unit.
• High-Performance Design: Designed to handle high pressures and deliver accurate readings.

For optimal installation, consider using the 3/8 Female to 3/8 Male SAE Quick Disconnect Adapter with a 1/8" NPT port on an ethanol sensor or the 5/16 Female to 5/16 Male SAE Quick Disconnect Adapter with a 1/8" NPT port on a factory fuel line. Please note that the ethanol sensor is not included.

DINANTRONICS Sport is the boost controller for the masses. Its simple design/execution allows for easy installation/removal that can be performed in a blink of an eye and yields results you will be sure to feel, and enjoy, from the get go. Coupled with Bluetooth capabilities right out of the box that allows for user controlled adjustability and a live boost monitor to keep track of the action its a value proposition that is unequaled in the marketplace.   

DINANTRONICS Sport plugs into a single sensor which lends itself to a very quick and and discrete installation, or removal, should the need arise. Not only does this connection method offer a simplified install but also effectively utilizes the factory DME, in tandem with itself, in order to re-map boost, fueling, and timing for optimal performance. Once installed DINANTRONICS Sport enjoys connectivity to various smartphone devices courtesy of its built-in Bluetooth Smart system. From the free app one has the freedom to reduce stock boost for valet duties or crank up the boost all the way up to the "race" setting for maximum enjoyment… or anywhere in between. Regardless of what setting is chosen there is a power level for everyone. Also within the app the end user has access to a live boost monitor which streams boost data in real time to the phone very similar in appearance to the sport gauges on the iDrive. Not only will you be able to feel the difference but now you can see it as well! 

Perhaps best of all, the unit automatically detects which engine it is installed upon and loads the approprate mapping. Effectively making a single unit compatible with an extremely wide range of applications making switching to a new vehicle, sharing with another, or selling the unit a breeze.  

Benefits of the DINANTRONICS Sport Performance Tuner for BMW M57/N57 & N47 Diesel Engines:

• Up to +40 HP and +70 lb-ft (M57/N57) - X5 xDrive35d, 335d, 535d/ d xDrive, 740Ld xDrive
• Up to +30 HP and +50 lb-ft (N47) - X3 xDrive28d, 328d/ d xDrive
• Bluetooth smart (Android and iOS Compatible)
  • Live boost monitor
  • Multiple power settings to choose from (Sport, Sport+, and Race). 
  • Valet / parental control modes (-3 PSI)
• Quick, easy, and discrete installation
• Automatically detects engine type and loads appropriate mapping
• CARB EO submitted and approval is pending.
• 14 day satisfaction guarantee
• 1 year product warranty (does not include consequential damages or labor costs)

BMW offers their M Performance retrofit kit for your 340i/i xDrive & 440i/i xDrive for increased power and a more aggressive sounding and free flowing exhaust! This system directly from BMW is perfect for those looking for more power and an aggressive exhaust note without voiding the warranty! Upon installation, an immediate improvement is noticed, especially in the low to mid range powerband. The kit increases your vehicle’s power by 35 hp to 355hp and 39 lb-ft of torque to 369 lb-ft (355 lb-ft for manual transmission vehicles).The BMW M Performance Power kit now comes bundled with a higher flowing, valve controlled exhaust for maximum performance and exhilaration! The BMW M Performance Power Kit features engine tuning software and an electronically controlled valve exhaust system that is actuated in Sport/Sport+ modes via the driving experience control button. 

Included with the Power and Sound Kit:

• M Performance Muffler
• M Performance Decal Kit
• Stick on label and Badge
• Performance BMW software upgrade code
• Wiring Harness

After ordering this kit, simply take this to your dealer to have the ECU re-flashed and all of the components included installed! 

The muffler included must also be used with the following BMW exhaust tips:

• Carbon Fiber - Priced Each
• Chrome - Priced Each

*Dealer pricing for installation varies from dealer to dealer. Please contact your dealer for installation cost before purchasing.