BMW Drivetrain Parts for BMW 3 Series F30 (2012+)

Clear BMW chassis

Please ensure your correct model is selected

Building your perfect BMW is more than just adding horsepower and stiff suspension. Your drivetrain needs attention in order to deliver power effectively. Most BMWs feature comfortable clutch discs, heavy flywheels, long shifter throws, and open differentials. The drivetrain transmits power to the wheels, but can also be a source of power loss when it is designed for comfort rather than performance. Everything on this page will help you improve your power delivery and driving experience by providing custom Limited Slip Differentials, Short Shift Conversions, Performance Clutch Discs, Lightweight Flywheels, and anything else your BMW needs to be the perfect driving experience.

Sub-Categories

Sort By:

Automatic Transmission Service Kit
For GA8HP70Z or GA8HP45Z automatic transmissions
Packaged by Turner - Corporate Logo
T#:5389733
Part#: 24118612901TMSKT
In Stock
Sale - Save 20% $ 215.99

This product was last offered at the strikethrough price on
05-03-2026

$ 173.28 USD
Free Shipping
Sale - Save 20%
$ 215.99

This product was last offered at the strikethrough price on
05-03-2026

$ 173.28 USD
Free Shipping
Over the life of a vehicle, the transmission can often be overlooked when performing routine maintenance. If left unserviced, the automatic transmission fluid will break down, causing the valve body and filter to become contaminated with deposits and sludge. This will lead to poor shifting, slipping, and ultimately, transmission failure. Kit Includes: Automatic transmission filter with associated hardware Oil pan gasket Drain plug with sealing washer Fill plug with sealing washer 7 Liters of Liqui Moly Top Tec ATF 1800 Turner Motorsport recommends performing a full service on your automatic transmission every 60,000 miles
Show More Show Less
IRP - Individual Racing Parts - Corporate Logo
T#:569029
Part#: IRPSS-3BCS
In Stock
$ 475.99 USD
Free Shipping
$ 475.99 USD
Free Shipping
IRP (Individual Race Parts) is a performance aftermarket parts company that focuses on high quality and long term reliability. The Universal Short Shifter V3 CS was developed to express their belief and compete with the much more expensive CAE Ultra Shifter, but at half the cost. The entire shifter assembly is made from all anodized aluminum and stainless steel for strength, durability, and looks. The V3 CS is a perfect replacement when looking for a shifter that gives you short, crisp, precise shifts with a 60% reduction in travel, plus a new return to center feature.
Show More Show Less
Bav Auto Tools - Corporate Logo
T#:580427
Part#: B8800120
In Stock
Sale - Save 10% $ 109.99

This product was last offered at the strikethrough price on
05-03-2026

$ 98.99 USD
Free Shipping
Sale - Save 10%
$ 109.99

This product was last offered at the strikethrough price on
05-03-2026

$ 98.99 USD
Free Shipping
For use with B8800122 impact driver to remove stuck CV axle shafts.

Burger Motorsports - Corporate Logo
T#:637547
Part#: BMS-DSBB-F
Back Ordered
Starting at $ 129.00 USD
Free Shipping
Starting at $ 129.00 USD
Free Shipping
The BMS differential brace attaches the rear differential to the subframe allowing better launches, less wheel hop, and a more stable feeling rear chassis. Their unique one-piece construction eliminates welding weak points common on similar units. No logos or markings are visible for a stealth OEM appearance.
Show More Show Less

Spec Clutches - Corporate Logo
T#:211063
Part#: SB533H-2
In Stock
$ 839.00 USD
Free Shipping
$ 839.00 USD
Free Shipping
Tuning your N54/N55 with all of the bolt-on upgrades? Don't allow your clutch or flywheel let you down! The stock clutch is fine for a stock car or just a simple software upgrade. But anything more and it quickly becomes the weak link (especially with drag races or hard launches). The 135i/335i/535i/Z4 35i SPEC Stage 2+ clutch kit is perfect for owners who want a performance clutch that works great with simple bolt-on modifications and will have a minimum of downsides or trade-offs. SPEC has spent considerable time and effort on the 335i models to produce a performance clutch and flywheel package that holds up to track and drag strip demands but is also easy to live with for daily driving. This clutch kit is meant to be used only with a SPEC flywheel. Features: The flywheel has a peak torque rating of 545ft-lbs Limitations of the stock flywheel are eliminated Self-adjusting, like the factory design, and the engagement point can be adjusted Sprung hub clutch to be used with the single-mass flywheel with near-stock levels of noise, vibration, and refinement **Due to the nature of lightened single mass flywheels added "NVH" or "chatter" will or may occur during operation. Accompanying modifications can also increase or decrease the amount of "NVH" or "chatter" in the drivetrain. Please contact our sales team with any questions.**
Show More Show Less
Packaged by Turner - Corporate Logo
T#:1241340
Part#: 24118612901T3KT
Back Ordered
$ 490.99

This product was last offered at the strikethrough price on
08-04-2026

$ 484.99 USD
Free Shipping
$ 484.99 USD
Free Shipping
Over the life of a vehicle, the transmission can often be overlooked when performing routine maintenance. If left unserviced, the automatic transmission fluid will break down, causing the valve body and filter to become contaminated with deposits and sludge. This will lead to poor shifting, slipping, and ultimately, transmission failure. For your 8-speed transmission, BMW recommends replacing your entire transmission pan and filter as the stock pan is constructed of plastic. This plastic pan will experience numerous drastic heat cycles over its lifetime, causing it to become weak and brittle, leading to potential catastrophic failure. Not only is this dangerous, but this is also very expensive when factoring in regular services. Upgrade your BMW's ZF transmission pan to PPE's Heavy-Duty Aluminum Transmission Pan and be done with pan replacements! PPE's one-of-a-kind transmission oil pan is cast from high-strength aluminum, allowing this pan to be used for the life of your transmission while also providing multiple benefits over your stock pan. Thanks to the thicker aluminum construction, internal heat fins, and integrated external cool fins, this pan helps promote reduced transmission fluid temperatures. PPE's trans pan has also been designed to allow for an additional quart of transmission fluid. The combined benefits of both cooler trans fluid and greater fluid capacity results in better lubrication, increased service life, and longer track sessions!
Show More Show Less

Spec Clutches - Corporate Logo
T#:7036582
Part#: SBB58A-2
In Stock
$ 749.00 USD
Free Shipping
$ 749.00 USD
Free Shipping
These kits feature a non-SAC mechanism pressure plate, which , deviating from the original design, provides a lighter rotating assembly, higher rpm capability and greater clamp load levels. Required for the install is a billet rebuildable flywheel that features a lightweight, low MOI design and infinite rebuildability. The billet aluminum flywheel weighs 14lbs, and billet steel 22 lbs.
Show More Show Less
Stage 1 Performance Clutch Kit (for SPEC single-mass flywheel) ...
For Use with SPEC Single Mass Flywheel SBB58A-2 or SBB58S-2 Only!
Spec Clutches - Corporate Logo
T#:397226
Part#: SB531-2
Ships in 3 Business Days
10% off MSRP $ 759.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 683.99 USD
Free Shipping
10% off MSRP
$ 759.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 683.99 USD
Free Shipping

Enhance Your Car's Performance with the Perfect Clutch-Flywheel Combination

When it's time to replace your car's clutch, you face a crucial decision: upgrade or stick with stock? In many cases, upgrading is the preferred choice, especially when you pair the right clutch with a single mass flywheel. The secret to achieving the perfect blend of performance and driving experience lies in selecting a sprung hub clutch. This option allows you to enjoy the advantages of a single mass flywheel while eliminating issues like noise, vibration, and harshness (NVH), ensuring an outstanding driving performance.

Show More Show Less

Spec Clutches - Corporate Logo
T#:597416
Part#: SB55S-2
Back Ordered
$ 599.00 USD
Free Shipping
$ 599.00 USD
Free Shipping

Spec Clutches - Corporate Logo
T#:394254
Part#: SB533-2
In Stock at Vendor
$ 799.00 USD
Free Shipping
$ 799.00 USD
Free Shipping
The Stage 3+ is for cars making serious levels of boost and torque. If you have upgraded turbos or a single-turbo conversion, or have checked off the list of full bolt-ons, this will be a very capable clutch for you. This clutch is designed to work only with a SPEC single-mass flywheel and avoid the pitfalls of the stock OEM flywheel. The stock dual mass flywheel uses springs and rubber to isolate vibrations from the engine and transmission. However, on high mileage or abused flywheels the rubber can break down and the springs will become weak. A worn dual mass flywheel limits the amount of torque you can put out. It will affect clutch engagement, shifts, and power delivery. In some cases a total flywheel failure can rip apart the flywheel, clutch, and even transmission housing. With the SPEC single-mass flywheel the limitations of the stock flywheel are eliminated. The SPEC flywheel is a single mass design (no internal springs or rubber to fail) and is offered in a steel or aluminum material. The steel will better dampen vibration than the aluminum so it's the better choice for street use. The aluminum will have greater vibration and noise (gearbox rattle) that may not be acceptable for everyone. The clutch in this Stage 3+ kit is a sprung hub design so SPEC has done all they can to minimize the noise and vibration. It's also self-adjusting, like the factory design, and the engagement point can be adjusted. For use with SPEC Billet Flywheel (E-Chassis cars) or (F-Chassis cars)
Show More Show Less
Spec Clutches - Corporate Logo
T#:597413
Part#: SB553H-2
In Stock at Vendor
$ 839.00 USD
Free Shipping
$ 839.00 USD
Free Shipping
Spec Clutches - Corporate Logo
T#:341710
Part#: SB532-2
In Stock
$ 790.99 USD
Free Shipping
$ 790.99 USD
Free Shipping

SPEC's Stage 2 clutch features a full faced pure Kevlar disc complete with steel backing. This lining offers outstanding drivability like the Stage 1 kit, with an increased torque capacity and a longer life. The hub is double sprung with built-in spring reliefs for flexibility, along with heat treatment for added strength and durability. This clutch is best served in any situation from daily driven on the street, to drag or autocross racing events.

Kit includes:

Pressure plate
Clutch disc
Pilot bearing
Clutch Release Bearing
Clutch Alignment Tool
Clutch fork
Designed to be used with billet single mass flywheel

Show More Show Less


Packaged by Turner - Corporate Logo
T#:555765
Part#: PBTSRKT54
In Stock
Sale - Save 23% $ 418.20

This product was last offered at the strikethrough price on
05-03-2026

$ 322.00 USD
Free Shipping
Sale - Save 23%
$ 418.20

This product was last offered at the strikethrough price on
05-03-2026

$ 322.00 USD
Free Shipping

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and upgraded bushings that will give you a tighter shifting feel than traditional rubber bushings and will resist wear significantly longer.

This kit is perfect to restore your driving pleasure and will be the last shifter rebuild you will ever need!

See the included components under Kit Contents below.

Show More Show Less
Mishimoto - Corporate Logo
T#:378417
Part#: MMTCU
In Stock
$ 110.99 USD
Free Shipping
$ 110.99 USD
Free Shipping
The Mishimoto Universal Transmission & Power Steering Cooler is used to cool automatic transmissions. Some Mishimoto radiators are only available for manual transmission applications; by using the universal transmission cooler, automatic transmission users have the ability to use our aluminum radiators with their automatic applications that would otherwise require an integrated transmission cooler. Fender bender damage your cooler? Mishimoto has you covered under its no questions asked warranty policy. Mishimoto will provide a warranty for all claims including vehicles involved in accidents. Warranty claims must include pictures of the accident and an official police report, and must be within three months of the accident. Dimensions of this core are 3/4" x 5" x 12". WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.
Show More Show Less
Spec Clutches - Corporate Logo
T#:209171
Part#: SB533F-2
In Stock
$ 979.00 USD
Free Shipping
$ 979.00 USD
Free Shipping
The Stage 3+ is for cars making serious levels of boost and torque. If you have upgraded turbos or a single-turbo conversion, or have checked off the list of full bolt-ons, this will be a very capable clutch for you. This clutch is designed to work only with a SPEC single-mass flywheel and avoid the pitfalls of the stock OEM flywheel. The stock dual mass flywheel uses springs and rubber to isolate vibrations from the engine and transmission. However, on high mileage or abused flywheels the rubber can break down and the springs will become weak. A worn dual mass flywheel limits the amount of torque you can put out. It will affect clutch engagement, shifts, and power delivery. In some cases a total flywheel failure can rip apart the flywheel, clutch, and even transmission housing. With the SPEC single-mass flywheel the limitations of the stock flywheel are eliminated. The SPEC flywheel is a single mass design (no internal springs or rubber to fail) and is offered in a steel or aluminum material. The steel will better dampen vibration than the aluminum so it's the better choice for street use. The aluminum will have greater vibration and noise (gearbox rattle) that may not be acceptable for everyone. The clutch in this Stage 3+ kit is a sprung hub design so SPEC has done all they can to minimize the noise and vibration. It's also self-adjusting, like the factory design, and the engagement point can be adjusted. For use with SPEC Billet Flywheel (E-Chassis cars) or (F-Chassis cars)
Show More Show Less

IRP - Individual Racing Parts - Corporate Logo
T#:401279
Part#: IRPSS-3B
Ships on Oct 20, 2026
$ 536.99 USD
Free Shipping
$ 536.99 USD
Free Shipping
The shifter in manual BMWs are said to provide a perfect blend of a sporty and comfortable feel. For some, this is perfect. For others that daily drive or track their BMW, they want shorter shifter travel and a much tighter feel. If you are one of these people, then we have a great option for you, the Short Shifter V3 from IRP, the successor of the V2.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:555777
Part#: PBTSRKT66
In Stock
$ 148.99 USD
Free Shipping
$ 148.99 USD
Free Shipping

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and OE quality bushings that will give you a tighter shifting feel and will hold up like a day 1 BMW.

This kit is perfect to restore your driving pleasure!

See the included components under Kit Contents below.

Show More Show Less
Packaged by Turner - Corporate Logo
T#:554535
Part#: 8HPATSKT
In Stock
Sale - Save 1% $ 384.99

This product was last offered at the strikethrough price on
08-04-2026

$ 381.23 USD
Free Shipping
Sale - Save 1%
$ 384.99

This product was last offered at the strikethrough price on
08-04-2026

$ 381.23 USD
Free Shipping

Automatic transmissions are reliable, shift smoothly, and can last without issue so long as they are properly maintained. Over time, the transmission fluid becomes thick and the filter becomes contaminated with small metal particles. This can cause excess wear, high transmission operating temperatures, and eventual failure. To prevent this we recommend changing your filter, fluid, and seals to ensure your transmission continues to operate flawlessly. We recommend filter and fluid changes every 50,000 miles.

Kit Includes:

  • Automatic transmission filter with associated hardware
  • Oil pan gasket
  • Drain plug with sealing washer
  • Fill plug with sealing washer
  • 7 quarts automatic transmission fluid

Fits the following BMW chassis with 8 speed transmissions:
E70, E71, F01, F02, F06, F07, F10, F12, F13, F13, F15, F16, F22, F23, F25, F26, F30, F31, F32, F33, F34, F36, G11

Show More Show Less

Packaged by Turner - Corporate Logo
T#:555744
Part#: PBTSRKT34
In Stock
Sale - Save 18% $ 326.99

This product was last offered at the strikethrough price on
05-03-2026

$ 268.20 USD
Free Shipping
Sale - Save 18%
$ 326.99

This product was last offered at the strikethrough price on
05-03-2026

$ 268.20 USD
Free Shipping

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and upgraded bushings that will give you a tighter shifting feel than traditional rubber bushings and will resist wear significantly longer.

This kit is perfect to restore your driving pleasure and will be the last shifter rebuild you will ever need!

See the included components under Kit Contents below.

Show More Show Less
Spec Clutches - Corporate Logo
T#:7036583
Part#: SBB58S-2
Ships in 3 Business Days
$ 748.00 USD
Free Shipping
$ 748.00 USD
Free Shipping
These kits feature a non-SAC mechanism pressure plate, which , deviating from the original design, provides a lighter rotating assembly, higher rpm capability and greater clamp load levels. Required for the install is a billet rebuildable flywheel that features a lightweight, low MOI design and infinite rebuildability. The billet aluminum flywheel weighs 14lbs, and billet steel 22 lbs.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:556364
Part#: F30335IDMKT
Ships in 1 Business Day
$ 545.99

This product was last offered at the strikethrough price on
08-09-2026

$ 476.99 USD
Free Shipping
$ 476.99 USD
Free Shipping

Packaged by Turner - Corporate Logo
T#:556365
Part#: F30335IDMKT2
Ships in 1 day
$ 636.99 USD
Free Shipping
$ 636.99 USD
Free Shipping
Packaged by Turner - Corporate Logo
T#:555750
Part#: PBTSRKT39
Ships in 1 day
$ 154.99 USD
Free Shipping
$ 154.99 USD
Free Shipping

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and OE quality bushings that will give you a tighter shifting feel and will hold up like a day 1 BMW.

This kit is perfect to restore your driving pleasure!

See the included components under Kit Contents below.

Show More Show Less
SACHS Performance - Corporate Logo
T#:393859
Part#: 883082999745
Ships in 5 Business Days
$ 555.00 USD
Free Shipping
$ 555.00 USD
Free Shipping

Experience longer life and less slippage with this Sachs Performance pressure plate for use with sport/racing clutch discs. This pressure plate offers more clamping power, and is recommended for cars making significantly more hp than stock (forced injection, etc) while using a stock flywheel. This is NOT for use on cars with an aftermarket flywheel (stock flywheel only).

Sachs Performance is the racing and performance oriented selection of high quality parts from Sachs and ZF Engineering. Supplying countless brands with OE parts and offering one of the widest selection of OEM replacement parts, they are known for their exceptionally high quality products. You can purchase these performance parts with confidence, knowing they will resist heavy wear and tear for much longer than most other aftermarket options.

Show More Show Less


SACHS Performance - Corporate Logo
T#:393874
Part#: 881864002675KT
Ships in 5 Business Days
$ 1,037.99 USD
Free Shipping
$ 1,037.99 USD
Free Shipping

Ensure your clutch system can get the all of the power to the wheels. Stock clutch components lack the ability to transmit the full torque and horsepower loads to the wheels without suffering from increased wear and eventual clutch fade. Sachs Performance Clutch Kits are designed for sport and race applications, delivering higher torque transmission without succumbing to wear and tear and fading over extended periods of abuse.

Sachs Performance Clutch Kits include the following upgraded components:

  • Performance Pressure Plate - Increased clamping force and resistant to wear

  • Performance Clutch Disc - Allows for higher clamping force, higher torque transmission, and better clutch engagement at higher RPM’s

These kits are available with two different clutch discs, Organic and Metallic. Organic clutch discs are perfect for both performance street and light-moderate track applications. Metallic are designed for specifically for full-time track use such as endurance racing, clubsport, autocross, hill climbing and 1/4 mile racing. Please be sure you are purchasing the kit that best fits your needs. Our sales staff can help with any questions or concerns you may have!

Sachs Performance is the racing and performance oriented selection of high quality parts from Sachs and ZF Engineering. Supplying countless brands with OE parts and offering one of the widest selection of OEM replacement parts, they are known for their exceptionally high quality products. You can purchase these performance parts with confidence, knowing they will resist heavy wear and tear for much longer than most other aftermarket options.

Show More Show Less
IRP - Individual Racing Parts - Corporate Logo
T#:401261
Part#: IRPSS-2B
Special Order: No Guaranteed ETA
$ 420.99 USD
Free Shipping
$ 420.99 USD
Free Shipping
The shifter in manual BMWs are said to provide a perfect blend of a sporty and comfortable feel. For some, this is perfect. For others that daily drive or track their BMW, they want shorter shifter travel and a much tighter feel. If you are one of these people, then we have a great option for you, the Short Shifter V2 from IRP.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:1241338
Part#: 24118612901T2KT
Back Ordered
$ 490.99

This product was last offered at the strikethrough price on
08-04-2026

$ 484.99 USD
Free Shipping
$ 484.99 USD
Free Shipping
Over the life of a vehicle, the transmission can often be overlooked when performing routine maintenance. If left unserviced, the automatic transmission fluid will break down, causing the valve body and filter to become contaminated with deposits and sludge. This will lead to poor shifting, slipping, and ultimately, transmission failure. For your 8-speed transmission, BMW recommends replacing your entire transmission pan and filter as the stock pan is constructed of plastic. This plastic pan will experience numerous drastic heat cycles over its lifetime, causing it to become weak and brittle, leading to potential catastrophic failure. Not only is this dangerous, but this is also very expensive when factoring in regular services. Upgrade your BMW's ZF transmission pan to PPE's Heavy-Duty Aluminum Transmission Pan and be done with pan replacements! PPE's one-of-a-kind transmission oil pan is cast from high-strength aluminum, allowing this pan to be used for the life of your transmission while also providing multiple benefits over your stock pan. Thanks to the thicker aluminum construction, internal heat fins, and integrated external cool fins, this pan helps promote reduced transmission fluid temperatures. PPE's trans pan has also been designed to allow for an additional quart of transmission fluid. The combined benefits of both cooler trans fluid and greater fluid capacity results in better lubrication, increased service life, and longer track sessions!
Show More Show Less

Packaged by Turner - Corporate Logo
T#:1241337
Part#: 24118612901T1KT
Back Ordered
Sale - Save 1% $ 458.99

This product was last offered at the strikethrough price on
08-04-2026

$ 452.95 USD
Free Shipping
Sale - Save 1%
$ 458.99

This product was last offered at the strikethrough price on
08-04-2026

$ 452.95 USD
Free Shipping
Over the life of a vehicle, the transmission can often be overlooked when performing routine maintenance. If left unserviced, the automatic transmission fluid will break down, causing the valve body and filter to become contaminated with deposits and sludge. This will lead to poor shifting, slipping, and ultimately, transmission failure. For your 8-speed transmission, BMW recommends replacing your entire transmission pan and filter as the stock pan is constructed of plastic. This plastic pan will experience numerous drastic heat cycles over its lifetime, causing it to become weak and brittle, leading to potential catastrophic failure. Not only is this dangerous, but this is also very expensive when factoring in regular services. Upgrade your BMW's ZF transmission pan to PPE's Heavy-Duty Aluminum Transmission Pan and be done with pan replacements! PPE's one-of-a-kind transmission oil pan is cast from high-strength aluminum, allowing this pan to be used for the life of your transmission while also providing multiple benefits over your stock pan. Thanks to the thicker aluminum construction, internal heat fins, and integrated external cool fins, this pan helps promote reduced transmission fluid temperatures. PPE's trans pan has also been designed to allow for an additional quart of transmission fluid. The combined benefits of both cooler trans fluid and greater fluid capacity results in better lubrication, increased service life, and longer track sessions!
Show More Show Less

Packaged by Turner - Corporate Logo
T#:590685
Part#: PBTSRKT54-1KT
In Stock
Sale - Save 18% $ 264.01

This product was last offered at the strikethrough price on
05-03-2026

$ 216.91 USD
Free Shipping
Sale - Save 18%
$ 264.01

This product was last offered at the strikethrough price on
05-03-2026

$ 216.91 USD
Free Shipping
SACHS Performance - Corporate Logo
T#:393886
Part#: 881864999533KT
In Stock
$ 1,043.99

This product was last offered at the strikethrough price on
03-25-2026

$ 1,025.99 USD
Free Shipping
$ 1,025.99 USD
Free Shipping

Ensure your clutch system can get the all of the power to the wheels. Stock clutch components lack the ability to transmit the full torque and horsepower loads to the wheels without suffering from increased wear and eventual clutch fade. Sachs Performance Clutch Kits are designed for sport and race applications, delivering higher torque transmission without succumbing to wear and tear and fading over extended periods of abuse.

Sachs Performance Clutch Kits include the following upgraded components:

  • Performance Pressure Plate - Increased clamping force and resistant to wear

  • Performance Clutch Disc - Allows for higher clamping force, higher torque transmission, and better clutch engagement at higher RPM’s

These kits are available with two different clutch discs, Organic and Metallic. Organic clutch discs are perfect for both performance street and light-moderate track applications. Metallic are designed for specifically for full-time track use such as endurance racing, clubsport, autocross, hill climbing and 1/4 mile racing. Please be sure you are purchasing the kit that best fits your needs. Our sales staff can help with any questions or concerns you may have!

Sachs Performance is the racing and performance oriented selection of high quality parts from Sachs and ZF Engineering. Supplying countless brands with OE parts and offering one of the widest selection of OEM replacement parts, they are known for their exceptionally high quality products. You can purchase these performance parts with confidence, knowing they will resist heavy wear and tear for much longer than most other aftermarket options.

Show More Show Less

Packaged by Turner - Corporate Logo
T#:556362
Part#: F30328IDMKT2
Ships in 2 Business Days
$ 282.99

This product was last offered at the strikethrough price on
03-11-2026

$ 273.99 USD
Free Shipping
$ 273.99 USD
Free Shipping

Drive line slop is often caused by faulty engine and transmission mounts. This can result in knocking noises under heavy acceleration, excessive vibration, and a less responsive feel in power. These OEM Corteco and Genuine BMW mounts are perfect to eliminate these problems and provide long lasting reliability.

Included in this kit:

  • OEM Corteco Engine Mount (Left & Right)
  • Genuine BMW Transmission Mount
  • New Installation Hardware
Show More Show Less
Spec Clutches - Corporate Logo
T#:41222046
Part#: SBB58SST
Ships in 3 Business Days
$ 1,999.00 USD
Free Shipping
$ 1,999.00 USD
Free Shipping
The Super Twin clutch kits from SPEC Clutch are for street and track use in cars with extreme horsepower and torque (700-1500 ft lbs tq). This SS Trim kit is rated by SPEC for 923 ft-lbs of torque. The Super Twin offers near-stock drivability, tremendous life expectancy, a no-shimming/setup bolt-in installation, and maintenance-free operation. SPEC Clutch recommends this clutch kit for all types of driving.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:556415
Part#: F30335IXDMKT
Ships in 1 day
$ 755.99 USD
Free Shipping
$ 755.99 USD
Free Shipping

Drive line slop is often caused by faulty engine and transmission mounts. This can result in knocking noises under heavy acceleration, excessive vibration, and a less responsive feel in power. These Genuine BMW mounts are perfect to eliminate these problems and provide long lasting reliability.

Included in this kit:

  • Genuine BMW Engine Mount (Left & Right)
  • Genuine BMW Transmission Mount
  • New Installation Hardware
Show More Show Less

SACHS Performance - Corporate Logo
T#:393824
Part#: 881864002674
Ships in 5 Business Days
$ 448.99 USD
Free Shipping
$ 448.99 USD
Free Shipping

Looking to upgrade your clutch disc? This Sachs Performance clutch disc is a great option. Allowing for higher torque and horsepower, this disc is perfect for both performance street and light to moderate track applications such as occasional endurance racing, clubsport, autocross, hill climbing and 1/4 mile racing.

Sachs Performance is the racing and performance oriented selection of high quality parts from Sachs and ZF Engineering. Supplying countless brands with OE parts and offering one of the widest selection of OEM replacement parts, they are known for their exceptionally high quality products. You can purchase these performance parts with confidence, knowing they will resist heavy wear and tear for much longer than most other aftermarket options.

Show More Show Less
SACHS Performance - Corporate Logo
T#:393826
Part#: 881864002675
Ships in 5 Business Days
$ 482.99 USD
Free Shipping
$ 482.99 USD
Free Shipping

Looking to upgrade your clutch disc? This Sachs Performance clutch disc is a great option. Allowing for higher torque and horsepower, this disc is perfect for aggressive track applications such as endurance racing, clubsport, autocross, hill climbing and 1/4 mile racing.

Sachs Performance is the racing and performance oriented selection of high quality parts from Sachs and ZF Engineering. Supplying countless brands with OE parts and offering one of the widest selection of OEM replacement parts, they are known for their exceptionally high quality products. You can purchase these performance parts with confidence, knowing they will resist heavy wear and tear for much longer than most other aftermarket options.

Show More Show Less
SACHS Performance - Corporate Logo
T#:393873
Part#: 881864 002674KT
Ships in 5 Business Days
$ 1,003.99 USD
Free Shipping
$ 1,003.99 USD
Free Shipping

Ensure your clutch system can get the all of the power to the wheels. Stock clutch components lack the ability to transmit the full torque and horsepower loads to the wheels without suffering from increased wear and eventual clutch fade. Sachs Performance Clutch Kits are designed for sport and race applications, delivering higher torque transmission without succumbing to wear and tear and fading over extended periods of abuse.

Sachs Performance Clutch Kits include the following upgraded components:

  • Performance Pressure Plate - Increased clamping force and resistant to wear

  • Performance Clutch Disc - Allows for higher clamping force, higher torque transmission, and better clutch engagement at higher RPM’s

These kits are available with two different clutch discs, Organic and Metallic. Organic clutch discs are perfect for both performance street and light-moderate track applications. Metallic are designed for specifically for full-time track use such as endurance racing, clubsport, autocross, hill climbing and 1/4 mile racing. Please be sure you are purchasing the kit that best fits your needs. Our sales staff can help with any questions or concerns you may have!

Sachs Performance is the racing and performance oriented selection of high quality parts from Sachs and ZF Engineering. Supplying countless brands with OE parts and offering one of the widest selection of OEM replacement parts, they are known for their exceptionally high quality products. You can purchase these performance parts with confidence, knowing they will resist heavy wear and tear for much longer than most other aftermarket options.

Show More Show Less


SACHS Performance - Corporate Logo
T#:393839
Part#: 881864999532
Back Ordered
$ 499.00 USD
Free Shipping
$ 499.00 USD
Free Shipping

Looking to upgrade your clutch disc? This Sachs Performance clutch disc is a great option. Allowing for higher torque and horsepower, this disc is perfect for both performance street and light to moderate track applications such as occasional endurance racing, clubsport, autocross, hill climbing and 1/4 mile racing.

Sachs Performance is the racing and performance oriented selection of high quality parts from Sachs and ZF Engineering. Supplying countless brands with OE parts and offering one of the widest selection of OEM replacement parts, they are known for their exceptionally high quality products. You can purchase these performance parts with confidence, knowing they will resist heavy wear and tear for much longer than most other aftermarket options.

Show More Show Less
Packaged by Turner - Corporate Logo
T#:556324
Part#: F30328IDMKT
Back Ordered
$ 286.99 USD
Free Shipping
$ 286.99 USD
Free Shipping

Drive line slop is often caused by faulty engine and transmission mounts. This can result in knocking noises under heavy acceleration, excessive vibration, and a less responsive feel in power. These OEM Corteco and Genuine BMW mounts are perfect to eliminate these problems and provide long lasting reliability.

Included in this kit:

  • OEM Corteco Engine Mount (Left & Right)
  • Genuine BMW Transmission Mount
  • New Installation Hardware
Show More Show Less