BMW Exhaust Parts, Mufflers & Catalytic Converters for BMW 3 Series F30 (2012+)

Still have the factory exhaust fitted to your B58? You don't know what your missing. Free up lost performance with a new full cat-back exhaust complete with factory valve control!

The B58 engine earned the badge "Worlds 10 Best Engines" four times as of 2023. In 2016 the single turbo straight six found its way to the leaderboards for the first time and followed up in 2017, 2019, and 2020 staying on the charts as one of the best engines in the WORLD.

Our new cat-back exhaust is designed to take out restrictions, maximize flow and give your B58 a signature exhaust note that will excite you on every drive. From the factory your vehicle comes equipped with a combination of three mufflers and resonators that do a great job of silencing the exhaust and restricting flow. There is a center muffler(one restriction), rear section resonator(two restrictions) and a bulky muffler(three restrictions!). With all of those stop gates how do you expect to get the maximum performance out of your vehicle, you simply cannot do so. Lucky for our in-house engineers you no longer have to deal with the quiet and limiting factory exhaust.

To create a cat-back exhaust for this incredible engine the changes happen right after the downpipe. We replaced the factory oval pipe with our full 3.0" T304 stainless steel piping. The true 3.0" exhaust makes its way through the center and rear of the car without the center muffler or resonator to keep flow to a maximum! With smooth mandrel bent transitions our exhaust passes perfectly under the rear subframe for a factory equivalent fit. Positioned in the rear of the car is our signature B58 muffler with beautiful inlet and outlet piping that creates the perfect exhaust tuning. Featuring relief cut slip joints and fabricated sheet metal brackets the exhaust can be fully adjusted and mounted seamlessly in the factory locations. Dual 4.0" exhaust tips are optioned to fill out the open space in the rear diffuser and complete the rear profile of the vehicle.

Part Design:

Turner In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment.
T304 Stainless Material in a natural finish - 1.25mm wall thickness, back purged and TIG-welded throughout
Full 3.0" Stainless Steel Mandrel Bent Tubing
T304 Stainless Steel 12mm barbed exhaust hangers Tig-Welded in OE locations for precise fitment.​
Strategically placed slip joints provide the most adjustability to obtain perfect fitment
Features and Benefits:

Street/Motorsport inspiration
Controlled by factory valves
Reduction in back pressure for increased throttle response, TQ and HP
Dual exit with fitted exhaust tips
Kit Contents:

3.0" front exhaust section (direct fitment to the factory downpipe)
Full 3.0" light weight free-flowing middle muffler sections for better sound, performance and weight savings.
Valved Rear muffler
Clamps and Hardware for an OEM+ install
Optional Turner Exhaust tips - 3.0" Inlet, 4.0" Outlet
Product Development:

Our F Chassis B58 Valved Catback was designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing.

B58 Engine Design:

BMW's first mass produced turbo charged engine, the N54 took the world by storm opening a whole can of worms in the car industry and aftermarket community. A new era of motors were created with the new B58 roughly 9 years after the N54 had been tested and pushed to its limits along with its single turbo companion, the N55. In 2015 the modular engine family was created and the B58 was released into the wild to set a new standard in performance and reliability. Turning back to their roots the B58 engine features a closed-deck engine design similar to the N54 that allows a massive increased in boost pressure capacity and heightened compression ratio. Thought the B58 is similar in weight and size to its predecessor, the new modular engine makes considerably more power right off the rip. With the new block design heat management has been upgraded to reduce the affects of heat cycling to slow the rate of cooling and prevent engine components from failing due to rapid cooling. Just like the N55 the B58 comes fitted with dual vanos, valvetronic and a single twin scroll turbo. Just 8 years experience of this motor we can all agree that the B58 looks like it could be the future of motors to come. This tunable engine has been tested up to 1000hp with the stock block and hosts a platform for the community to break into a whole new class of attainable "supercar killers".

Presenting our Turner Motorsport Performance Cat-Back Exhaust, tailor-made for your 330 or 430. Immerse yourself in an enhanced driving adventure as this meticulously engineered exhaust takes your B46/B48-equipped car to exhilarating new heights. With an unwavering commitment to performance and quality, the Turner exhaust is crafted to unlock the full potential of your F chassis.

Experience a symphony of performance and sound, coupled with a visual upgrade through the quad exit exhaust tips that amplify the motorsport essence of your vehicle. Elevate your driving encounters with the Turner Motorsport cat-back exhaust - unleash the power, reveal the glorious sound, and capture attention wherever you go.

Incorporating their distinctive design principles, this exhaust produces a commanding, deep tone, revealing the bold personality of the revolutionary line of 4-cylinder turbo engines. Leveraging the factory valve control, the Turner cat-back ensures an exciting sound during acceleration, seamlessly blending the high-performance sound with daily driving convenience. Crafted from 1.25mm wall T304 stainless steel, Turner's exhaust boasts superior durability, corrosion resistance, and aesthetic appeal.

Designed with the customer in mind, the installation is a breeze, featuring a straightforward bolt-on process using factory slip joints and mounting locations. Your exhaust system includes all the necessary clamps and hardware for a hassle-free installation. Upgrade your 330/430 with the Turner Motorsport cat-back and let every drive become a statement of power and style.

Upgrading the sound:

Our exhaust allows you to turn up the volume and let the B46/B48 boast its smooth and hearty exhaust tone. Let's be honest, what's the point of owning a B48 if you're not going to upgrade the exhaust? Our signature muffler design allows you to transfer the exhaust valve from your factory system directly onto your new Turner system. The Turner exhaust signature muffler design allows for two flow paths that change both tone and volume. With the vehicle in eco or comfort mode, the valves remain closed, with the closed valves the exhaust system allows the gasses to flow through the muffler toning down the volume and giving a more refined exhaust note. While in driving modes sport or sport+ the valve opens and the flow path changes to a "straight flow path" essentially turning into a straight-piped exhaust for the least amount of restriction and the most amount of B48 sound!

How the cat-back is designed:

To create a cat-back exhaust for this incredible vehicle the upgrade happens right at the downpipe. Turner replaced the factory components with oversized 3.0" T304 stainless steel piping. The true 3.0" exhaust makes its way through the center and rear of the car without the center muffler or resonator to keep the flow to a maximum! With smooth mandrel bent transitions, this exhaust passes perfectly under the rear subframe for a factory equivalent fit. Positioned in the rear of the car is Turner's signature B46/B48 muffler with a beautiful inlet and outlet piping that creates the perfect exhaust tuning. Featuring relief cut slip joints and fabricated sheet metal brackets the exhaust can be fully adjusted and mounted seamlessly in the factory locations. Dual 3.0" exhaust tips are optioned to fill out the open space in the rear diffuser and complete the rear profile of the vehicle.

Features and Benefits:

Street/Motorsport inspiration
Controlled by factory valves
Pronounced dual 3.0" Exhaust tip options
17 lb weight savings (Factory - 55lbs, Turner 38lbs)
Kit Contents:

3.0" front exhaust section
Full 3.0" lightweight free-flowing midsection for better sound, performance, and weight savings.
Valved rear muffler
Valve extension harness
Clamps and hardware for an OEM+ install
Optional dual 3.0" exhaust tips
Optional OBD plug-in
Part Design:

Turner In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment.
T304 Stainless Material in a natural finish - 1.25mm wall thickness, back purged and TIG-welded throughout
Full 3.0" Stainless Steel Mandrel Bent Tubing
T304 Stainless Steel 12mm barbed exhaust hangers Tig-Welded in OE locations for precise fitment.​
Strategically placed slip joints provide the most adjustability to obtain perfect fitment
Optional OBD Plug-In:

The factory-valved muffler is not only controlled by different driving modes like comfort, sport, and sport plus but the RPM also plays into whether the valves are opened or closed. If you are looking for a solution to define whether your exhaust valve is fully opened or closed then you should look into adding an OBD plug-in that features Bluetooth valve control from your phone. During testing, the best way to choose whether your valve is open or closed for your sound preference is through an OBD-linked application on your phone. Included in this kit are optional OBD extensions to not only gain diagnostic function but also gain the ability to influence widgets on your vehicle such as valve position on your valved muffler.

Arguably THE BEST modification for your B46/B48. This muffler delete sounds too good to be a 4 cylinder! The combination of B48 and muffler delete surpasses all sound expectations from a 4-cylinder! Impressive direct-fit solution. With this new muffler delete you can transform the sound and driving experience of your 330 or 430. A simple installation that can be completed with hand tools gives you the ability to take your car to the next level at home in your garage!

The ECS B48 muffler delete removes the heavy and restrictive factory exhaust muffler and replaces it with a high-flow, straight-through exhaust pipe. This adds a louder exhaust note in a simple, cost-effective way without replacing the entire exhaust system and is fully compatible with the OEM rear valance. The muffler delete creates a noticeable increase in exhaust sound and more exhilarating turbo noise, without adding significant drone at cruising speeds. As an added bonus, our muffler delete shaves off 21.0 lbs., weighing in at only 7.0lbs compared to the OEM muffler at 28.0lbs!

Features and benefits:

Enhanced exhaust tone
Simple installation (with instructions!)
21lb weight savings! (Factory muffler 28 lbs, muffler delete 7 lbs!)
Tip adjustment capability ​
Slide farther on for left and right adjustment
Rotate for verticle adjustment
Good looking and durable 304 stainless steel construction
Heavy-duty fabricated sheet metal exhaust hangers
Dual staggered tip exhaust tips (integrated)
Installation and Support:

Installation is as easy as cutting, placing into position, and clamping!
Tools you might want for the job:
Exhaust hanger removal pliers - T379176
Exhaust pipe cutter - T385451

Let's be honest—what's the point of owning a B58-equipped BMW if you can't hear it? The F30 340i and F32/F33 440i feature a bulky, suitcase-style rear muffler assembly that muzzles the B58's turbocharged symphony. While cat-back exhaust systems can be a serious investment, our new muffler delete kit offers a cost-effective alternative that delivers all the sound, style, and performance your BMW deserves.

Our system completely transforms the character of your F3X by replacing the restrictive rear muffler with a high-flowing, TIG-welded stainless steel setup that enhances tone, reduces weight, and maintains factory fitment and finish. The Turner Motorsport Muffler Delete Kit features dual 80mm primary tubing that transitions to adjustable 100mm tip sections for a clean yet aggressive look. Up front, the muffler delete kit attaches to the OEM mid-pipe using factory-style sleeve clamps. The connecting pipe is installed at a factory cut location, creating an easy and reversible modification. At the rear, the included sleeve clamps enable easy adjustment and precise tip placement inside the factory rear diffuser.

Features & Benefits:

TIG-welded dual 80mm primary tubing seamlessly transitions to adjustable, twin slash-cut 100mm tip sections, delivering a bold, refined appearance Straightforward cut-and-clamp installation, 100% reversible Sleeve clamps provide full adjustability for effortless alignment and precise tip positioning Utilizes factory exhaust hangers for a clean, bolt-on installation—no cutting or drilling required Installation & Support:

- Click HERE for Installation Instructions -

Upgrade your exhaust system with the 2.5" Stainless Steel 3-Bolt Flange - Priced Each. This high-quality flange is designed to provide a durable and reliable connection for your exhaust components. Made from stainless steel, it offers corrosion resistance and longevity, ensuring a lasting performance. Whether you're repairing or customizing your exhaust system, this flange is an essential component for a secure fit.

• Durable stainless steel construction
• Corrosion-resistant for long-lasting performance
• Provides a reliable connection for exhaust components
• Suitable for repair or customization of exhaust systems

Upgrade your exhaust system with the Downpipe To Cat-Back Reducer.

Engineered for optimal performance and durability, this reducer allows for seamless connection between your downpipe and cat-back exhaust system. Its high-quality construction ensures a tight seal, reducing exhaust leaks and enhancing overall exhaust flow. With easy installation and compatibility with various exhaust systems, this reducer is a must-have for any performance enthusiast.

• Allows for seamless connection between downpipe and cat-back exhaust
• High-quality construction for durability
• Tight seal reduces exhaust leaks
• Enhances overall exhaust flow
• Easy installation and compatibility with various exhaust systems

Achieving precise exhaust fitment can be tricky—especially when the exhaust hanger has room to slide. This movement can cause annoying rattles or even lead to contact with the underbody or rear bumper. The ECS Tuning Exhaust Locking Collar offers a simple and effective fix. Designed to clamp securely around the exhaust hanger, this collar keeps everything firmly in place, eliminating unwanted movement.

Crafted from high-strength 6031 billet aluminum and finished in a sleek black anodized coating, it delivers both durability and corrosion resistance. With this collar in place, your exhaust stays exactly where it should—no rattles, no surprises.

Product Design:

Made from precision machined 6061 aluminum Black anodized finish Stainless steel M5 X 0.8mm hardware Installation & Support:

Install the locking collar around your exhaust hanger, position the hanger in place, and snug the locking collar down in place against the hanger! ECS Exhaust Hanger Locking Collars are available for 10mm and 12mm exhaust hangers. Please measure your hangers before ordering. The 10mm locking collar can be found HERE.

Enhance your BMW's hose connections with this sleek and reliable smooth clamp. Crafted specifically for BMW models, this clamp ensures secure and leak-free connections for hoses. Experience improved durability and functionality in your BMW's system with this purpose-built smooth clamp.

Key Benefits:

• Secure and leak-free hose connections
• Designed specifically for BMW models
• Enhanced durability for long-term use

Transform the sound profile and driving dynamics of your BMW without replacing the entire exhaust system! Engineered specifically for the N20-equipped F3X platform, this direct-fit muffler delete delivers an aggressive, sporty tone you wouldn't expect from a 4-cylinder engine.

By eliminating the restrictive factory muffler and replacing it with a high-flow, straight-through exhaust pipe, this kit unlocks an incredible surge in volume and a sporty tone. Beyond the dramatic sound upgrade, this setup drastically improves performance efficiency through massive weight savings. The high-flow straight pipe removes 21 lbs from the rear of the vehicle, dropping the total axle-back exhaust weight down to just 7 lbs. Designed for quick at-home installation, it installs using basic garage hand tools and integrates perfectly with your OEM rear valance for a clean, OEM+ aesthetic.

Universal 2.5" inlet to 3.5" outlet exhaust tip. Priced per exhaust tip.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Brushed Aluminum Finish
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

Universal 2.5" inlet to 3.5" outlet exhaust tip. Priced per exhaust tip.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Mirror Chrome Finish
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp