Turner Motorsport for BMW 3 Series F30 (2012+)

When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however this does not limit you to this flow. The inner baffle orientation can be easily adjusted to flow in both directions in case you decide to move this catch can to a different vehicle. A 4 chamber system  baffle system inside the catch can was engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can. Having a closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation.

Our catch can was also designed with the idea that the cans fill level can easily be checked with a top mounted dipstick and an optional use bottom drain hole. The drain system comes complete with a valve and hose to be mounted at a lower area of the vehicle so when you're doing an oil change you can drain the catch can.

Features:

• 6061-T6 billet machined body, anodized black for lasting protection and appearance
• Strategically positioned 4 chamber baffle system maximizes oil / air separation 
• Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
• Sealed with a pre-installed viton O-Ring
• Includes 2.5mm allen key to remove baffle plates for cleaning
• Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
• Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
• Optional use drain hole - drain kit included!
• Universal mounting kit

High Performance air filter, replacement filter for Turner Motorsport intakes, or great for your custom intake project. 

Filter Dimension 

• 178MM length 
• 127MM base
• 75MM inlet 

Upgrade your F chassis with the B46/B48 3" Center Muffler and Resonator Delete for a deeper, more liberating exhaust tone. This modification offers a direct swap for the factory center exhaust section, effectively enhancing both sound and performance.

Experience a distinct shift in exhaust tone, accompanied by improved flow efficiency and the elimination of factory exhaust bottlenecks. The Turner Motorsport B46/B48 Resonator Delete replaces the cumbersome factory center muffler and resonator with lightweight, high-flow T304 stainless steel 3.0" exhaust tubing.

Not only does this upgrade deliver a more pronounced exhaust note, but it also contributes to a smoother flow path, reducing restrictions and enhancing overall performance. Plus, shedding approximately 6 lbs, this mid-pipe replacement offers a practical, cost-effective solution for those seeking an enhanced driving experience without the need to replace the entire exhaust system. Fully compatible with both the front downpipe and rear muffler, it's a seamless addition to your vehicle's setup.

Features and benefits:

Enhanced exhaust tone
Simple installation (with instructions!)
6lb weight savings! (Removes center muffler and center resonator)
Good looking and durable 304 stainless steel construction
Heavy-duty fabricated sheet metal exhaust hangers
Direct bolt-on to the factory downpipe
Includes factory front clamp and rear sleeve clamp for full installation
Kit Includes:

Front exhaust section
Mid-pipe exhaust Section
Factory downpipe exhaust clamp
Rear muffler sleeve clamp
Installation and Support:

Installation is as easy as cutting, placing into position, and clamping!
Tools you might want for the job:
Exhaust hanger removal pliers - T379176
Exhaust pipe cutter - T38545

Are you tired of the traditional white DRLs that came with your BMW from the factory? Upgrade your headlights with the new Turner Motorsport LED DRL Modules to achieve the highly sought-after Yellow DTM or GT-style appearance!

Turner Motorsport LED DRL Modules offer the first true Plug-and-Play solution for your BMW, allowing you to easily swap them out without damaging your original DRLs. Unlike many options that require you to remove your DRL modules and pry the LED circuit board away from the factory heatsink—risking a bent circuit board and cracked traces—Turner Motorsport’s modules come with a pre-mounted heatsink. This design eliminates the risk and saves time on installation. Plus, if you ever need to revert back to stock, simply swap the modules out and you’re good to go.

These LED DRL modules are designed to work with the factory headlight controllers and wiring. No coding or additional wiring is necessary for a seamless integration.

This kit includes all the DRL modules necessary to upgrade both the driver and passenger side headlights.

Installation Note: Due to the location of the factory modules, removal of the fender liners and/or front bumper may be necessary.

Modern BMW's are beginning to leave the performance derived handling and power delivery in the past as the demand for more comfort and features rises. The stiff suspension components designed around having the best driving experience from a luxury car has been left for the M models and replaced with soft rubber bushings and mounts. Unfortunately, this is a good move by BMW to support the masses.

The obvious approach was to offer products so the modern BMW can be upgraded into the car the enthusiast desires, superb handling, control, and a direct delivery of power to the rear wheels. When you upgrade to our Delrin subframe mounts you reconnect that power with almost zero negative feedback.

The added appeal to someone looking to take one of these machines on the race track is Delrin can be used when solid mounts are needed and aluminum is not an option with strict regulations found in Grand-Am, BMW CCA, and other racing series.

Product features:

• Precision machined Delrin(TM) 150 bushings.
• Precision machined 6061-T6 aluminum inserts. 
• Class legal for any racing class that does not allow a solid subframe bushing. 

Performance Benefits:

• Eliminates subframe movement for more direct throttle and suspension  response. 
• Minimizes wheel hop due to subframe deflection and movement. 

***Installation Instructions***

These GAC differential bushings/mounts fit the following BMWs: 
2014+ F22 BMW 228i 228iX M235i M235iX 
2012+ F30 BMW 320i 320iX 328i 328iX 335i 335iX - Sedan 
2014+ F34 BMW 328i 328iX 335iX - Gran Turismo 
2014+ F32 BMW 428i 428iX 435i 435iX - Coupe 
2014+ F33 BMW 428i 428iX 435i 435iX - Convertible
2014+ F36 BMW 428iX -Gran Coupe 

Set of 4 universal 2.5" inlet to 3.5" outlet exhaust tips.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Black Chrome
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

Set of 2 universal 2.5" inlet to 4.0" outlet exhaust tips.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
4.0" Outer Diameter
Black Chrome
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp