BMW Wheels - Genuine & Performance for BMW 3 Series F31 (2014+)

18" APEX SM-10RS Forged Staggered Wheel Set

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:20584610

Part#: SM10RS189H95ST

Ships in 5 Business Days

Starting at $ 2,856.00 USD

Add to Wish List

Starting at $ 2,856.00 USD

Add to Wish List

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Spring Line Forged wheels from Apex Wheels feature: Side-milled spoke design to cut out excess material and gain wider and deeper spokes. Reinforced critical structure points to add inner lip strength and increase load rating. Weight optimized to balance strength and maintain a lighter design. Independently tested for rigorous JWL standards based on duration, impact, and total loading. High clearance barrel design for Big Brake Clearance. Paintless Knurled Beads that keeps your tire from slipping with sharp and maximized grip! Impact Socket friendly to support oversized race lugs and faster wheel changes with impact sockets. Laser-engraved specs to easily identify your wheel collection at home or in a hurry at the track! On top of all of these benefits that focus on the best user experience possible Apex Wheels goes one step further. These forged wheels are always hub centric and built for your select vehicle application, made to fit TPMS sensors and OE center caps to get a factory look with improved performance. This is a wheel you can depend on! Comes with a LIFETIME WARRANTY against material and workmanship defects and a 1 YEAR warranty on the finish of the wheels. If you are already sold on these wheels there is one last final benefit that will boost your confidence to drive these wheels to the moon and back; Apex Wheels offers 50% OFF replacement wheels no matter the damage to make sure your favorite wheel setup can go on forever!

Show More Show Less

APEX ARC-8 18" Square Wheel Set - Satin Black

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:386798

Part#: ARC8188545SB

Ships in 3 Business Days

$ 1,516.00 USD

Add to Wish List

Qty

$ 1,516.00 USD

Add to Wish List

Specifications: Color - Satin Black Size - 18x8.5" ET45

17x9" ET30 Satin Black APEX VS-5RS Forged BMW Wheel

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:18932324

Part#: VS5RS179ET30SMBK

Ships in 5 Business Days

$ 659.00 USD

Add to Wish List

Qty

$ 659.00 USD

Add to Wish List

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Spring Line Forged wheels from Apex Wheels feature: Side-milled spoke design to cut out excess material and gain wider and deeper spokes. Reinforced critical structure points to add inner lip strength and increase load rating. Weight optimized to balance strength and maintain a lighter design. Independently tested for rigorous JWL standards based on duration, impact, and total loading. High clearance barrel design for Big Brake Clearance. Paintless Knurled Beads that keeps your tire from slipping with sharp and maximized grip! Impact Socket friendly to support oversized race lugs and faster wheel changes with impact sockets. Laser-engraved specs to easily identify your wheel collection at home or in a hurry at the track! On top of all of these benefits that focus on the best user experience possible Apex Wheels goes one step further. These forged wheels are always hub centric and built for your select vehicle application, made to fit TPMS sensors and OE center caps to get a factory look with improved performance. This is a wheel you can depend on! Comes with a LIFETIME WARRANTY against material and workmanship defects and a 1 YEAR warranty on the finish of the wheels. If you are already sold on these wheels there is one last final benefit that will boost your confidence to drive these wheels to the moon and back; Apex Wheels offers 50% OFF replacement wheels no matter the damage to make sure your favorite wheel setup can go on forever!

Show More Show Less

20" BBS CIR Wheels - Staggered Set Of Four

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26471519

Part#: CI0102BPOKT1

Ships in 2 Business Days

$ 3,877.99 USD

Add to Wish List

Qty

$ 3,877.99 USD

Add to Wish List

18" APEX ARC-8 Square Wheel Set

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:19329461

Part#: ARC8188545SQ

Ships in 3 Business Days

Starting at $ 1,516.00 USD

Add to Wish List

Starting at $ 1,516.00 USD

Add to Wish List

18x8.5" ET45 APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

Show More Show Less

19" APEX SM-10 Staggered Wheel Set - Pick Your Finish

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:19858318

Part#: SM10199H10S

Ships in 5 Business Days

Starting at $ 1,976.00 USD

Add to Wish List

Starting at $ 1,976.00 USD

Add to Wish List

Apex ARC8 19x9" ET30/19x10" ET25 Staggered Wheel Set APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

Show More Show Less

19" APEX SM-10 Staggered Wheel Set - Pick Your Finish

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:19560875

Part#: SM10199H10PDK

Ships in 5 Business Days

Starting at $ 1,976.00 USD

Add to Wish List

Starting at $ 1,976.00 USD

Add to Wish List

APEX EC-7 19" Staggered Wheel Set -- 19x9" / 19x10" This set of 9" and 10" SM-10 wheels is an easy staggered fitment for the E46 M3 and Z4M models. These are a direct fit with no spacers or fender rolling required. We use a 9" ET30 on the front and a 10" ET25 on the rear. These are only slightly wider than the stock sizes. The rear wheels have a deeper concave face than the fronts, emphasizing the RWD chassis and adding some muscularity to the stance. APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still lightweight. The wheels are around 10 lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

Show More Show Less

19" APEX ARC-8RT Staggered Wheel Set - Choose Your Finish!

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:40478130

Part#: ARC8RT19995

Ships in 5 Business Days

Starting at $ 3,256.00 USD

Add to Wish List

Starting at $ 3,256.00 USD

Add to Wish List

Apex ARC-8RT 19x9" ET30 & 19x9.5" ET22 Staggered Wheel Set Introducing the Apex ARC-8RT, part of our Touring Line of forged wheels. A timeless classic, reborn as a fully forged wheel. Fully forged 6061-T6 aluminum Reinforced Sprint™ spec inner lip Stronger, yet thinner spokes Deeper concave profile Improved brake clearance OEM center cap compatibility Unmatched replacement program Lifetime structural warranty Independently tested *Aftermarket wheels above stock sizes may require certain amounts of fitment modification to prevent damage to the wheel or interior wheel well components. Fender rolling, spacers, or camber adjustment may be necessary for perfect fitment.

Show More Show Less

19" APEX ARC-8RT Square Wheel Set - Choose Your Finish!

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:40342931

Part#: ARC8RT19930

Back Ordered

Starting at $ 3,236.00 USD

Add to Wish List

Starting at $ 3,236.00 USD

Add to Wish List

Apex ARC-8RT 19x9" ET30 Square Wheel Set Introducing the Apex ARC-8RT, part of our Touring Line of forged wheels. A timeless classic, reborn as a fully forged wheel. Fully forged 6061-T6 aluminum Reinforced Sprint™ spec inner lip Stronger, yet thinner spokes Deeper concave profile Improved brake clearance OEM center cap compatibility Unmatched replacement program Lifetime structural warranty Independently tested *Aftermarket wheels above stock sizes may require certain amounts of fitment modification to prevent damage to the wheel or interior wheel well components. Fender rolling, spacers, or camber adjustment may be necessary for perfect fitment.

Show More Show Less

19" APEX VS-5 Staggered Wheel Set - Choose Your Finish!

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:40545967

Part#: VS519995

Ships in 5 Business Days

Starting at $ 2,056.00 USD

Add to Wish List

Starting at $ 2,056.00 USD

Add to Wish List

APEX VS-5 19x9" ET30 & 19x9.5" ET22 Staggered Wheel Set VS-5 maximizes the performance potential of a flow-formed wheel. It combines features typically only found on forged wheels with a premium look at an unbeatable price. Features: Iconic 5-Spoke Design Side-Milled Spokes for Reduced Weight Reinforced Inner Lip for Strength Massive Brake Clearance Ultra-Concave Face Profiles Independently Tested and Certified Unmatched Replacement Program Lifetime Structural Warranty The VS-5 brings the aggressive look of our iconic forged VS-5RS to a flow-formed wheel. At a fraction of the price of its forged sibling, VS-5 punches well above its weight and maximizes the performance potential of a flow-formed wheel. With nearly two decades of experience perfecting track-ready flow-formed wheels, we engineered the VS-5 to deliver Real Performance at an unbeatable value. With a strength-to-weight ratio and features typically reserved for forged wheels, the VS-5 pushes the boundaries of flow-formed manufacturing to the max. Weighing only ~2-2.5 lbs more than its forged sibling, the VS-5 isn’t just a top tier option in the flow-formed space, it’s a wheel we consider the last step in performance before leveling up to a forged design. Flow-forming enables us to create high-performance wheels without the price premium of forging. It improves the mechanical properties and grain structure of the barrel, increasing its strength and stiffness, which allows us to use less material and reduce weight. Thanks to our superior engineering, our flow-formed wheels have a higher load rating than some competitors' forged wheels. A critical part of VS-5’s remarkable weight-savings, side-milled spokes also help with its stunning looks. The VS-5 features advanced side-milled spokes that have any excess material that doesn’t add strength removed from the sides of the spokes via precision CNC ball cutter. This process is often deemed cost-prohibitive by others, but for performance without compromise, we believe it's essential. The inner lip is the most vulnerable part of a wheel because it has no spokes for support. Our flow-formed Evolution Line adds more material to this vulnerable area as an added layer of protection against impact from track berms, potholes, and whatever else the road may throw at you.

Show More Show Less

17" BBS SR Wheels - Set Of Four

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26471663

Part#: SR003VGPKKT

Ships in 2 Business Days

$ 1,889.00 USD

Add to Wish List

Qty

$ 1,889.00 USD

Add to Wish List

Upgrade your BMW with the BBS SR wheels, a premium option renowned for their sophisticated design and high-performance attributes. These wheels feature a timeless multi-spoke design, offering a perfect fusion of style and functionality. Crafted using advanced manufacturing processes and top-quality materials like forged aluminum alloy, the SR wheels are lightweight yet incredibly robust, enhancing both the aesthetics and handling characteristics of vehicles. Popular among automotive enthusiasts, the SR series caters to drivers seeking to elevate the appearance and performance of their cars. With their combination of elegant aesthetics and precision engineering, BBS SR wheels stand as a top choice for drivers who prioritize both style and performance in their wheel selection.

Sophisticated design enhances vehicle aesthetics
Lightweight construction improves vehicle performance
Robust build ensures durability
Precision engineering enhances handling

Specs:

Size: 17"x7.5"
Offset: 35mm
Center Bore: PFS - Includes Set of Four PFS to 72.5mm PFS Rings & Clips
Bolt Pattern: 5x120
Color: Satin Black with Diamond Cut Spoke Faces

Show More Show Less

18" BBS SR Wheels - Set Of Four

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26038569

Part#: SR035VGPKKT

Ships in 2 Business Days

$ 2,109.00 USD

Add to Wish List

Qty

$ 2,109.00 USD

Add to Wish List

18" APEX ARC-8 Square Wheel Set

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:20584692

Part#: ARC81885SQ

Ships in 5 Business Days

Starting at $ 1,516.00 USD

Add to Wish List

Starting at $ 1,516.00 USD

Add to Wish List

18x8.5" ET38 APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

Show More Show Less

17" BBS SX Wheels - Set Of Four

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26471668

Part#: SX0401SKKT

Ships in 2 Business Days

$ 1,480.00 USD

Add to Wish List

Qty

$ 1,480.00 USD

Add to Wish List

Enhance your BMW's aesthetics and performance with BBS SX wheels, a premium choice renowned for its sophisticated design and high-performance attributes. The SX wheels feature a timeless multi-spoke design, seamlessly blending style with functionality. Crafted through advanced manufacturing processes and top-quality materials like forged aluminum alloy, these wheels offer lightweight yet robust construction, enhancing both vehicle aesthetics and handling characteristics. Embraced by automotive enthusiasts, the SX series is favored for its ability to elevate the appearance and performance of cars. With their elegant aesthetics and precision engineering, BBS SX wheels emerge as the preferred choice for drivers prioritizing both style and performance in their wheel selection.

Sophisticated design enhances vehicle aesthetics
Lightweight construction improves handling and fuel efficiency
Exceptional durability ensures long-lasting reliability
Timeless multi-spoke design adds a touch of elegance

Specs:

Size: 17"x7.5"
Offset: 43mm
Center Bore: 72.5mm
Bolt Pattern: 5x120
Color: Sport Silver

Show More Show Less

17" BBS SX Wheels - Set Of Four

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26471665

Part#: SX0303SKKT

Ships on Jul 27, 2026

$ 1,489.00

This product was last offered at the strikethrough price on
07-02-2026

$ 1,435.99 USD

Add to Wish List

Qty

$ 1,435.99 USD

Add to Wish List

Elevate your BMW's appearance and performance with the BBS SX wheels, a premium option renowned for its sophisticated design and high-performance attributes. These wheels feature a timeless multi-spoke design, offering a perfect fusion of style and functionality. Crafted using advanced manufacturing processes and top-quality materials like forged aluminum alloy, the SX wheels are lightweight yet incredibly robust, enhancing both the aesthetics and handling characteristics of vehicles. Popular among automotive enthusiasts, the SX series caters to drivers seeking to elevate the appearance and performance of their cars. With their combination of elegant aesthetics and precision engineering, BBS SX wheels stand as a top choice for drivers who prioritize both style and performance in their wheel selection.

Sophisticated design enhances vehicle aesthetics
Lightweight construction improves vehicle performance
Robust build ensures durability
Precision engineering enhances handling

Specs:

Size: 17"x7.5"
Offset: 37mm
Center Bore: PFS - Includes Set of Four PFS to 72.5mm PFS Rings & Clips
Bolt Pattern: 5x120
Color: Sport Silver

Show More Show Less

19" APEX EC-7 Staggered Wheel Set

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:20551663

Part#: EC7199H95ST

Ships in 5 Business Days

Starting at $ 1,816.00 USD

Add to Wish List

Starting at $ 1,816.00 USD

Add to Wish List

Apex ARC8 19x9 ET28/30 19x9.5 ET22 Staggered Wheel Set APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

Show More Show Less

17" APEX ARC-8 Square Wheel Set

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:19329464

Part#: ARC817952ST

Back Ordered

Starting at $ 1,356.00 USD

Add to Wish List

Starting at $ 1,356.00 USD

Add to Wish List

Apex ARC8 17x9" ET52 Square Wheel Set APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

Show More Show Less

17" APEX ARC-8 Square Wheel Set

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:20386752

Part#: ARC8178540SQ

Ships in 5 Business Days

Starting at $ 1,316.00 USD

Add to Wish List

Starting at $ 1,316.00 USD

Add to Wish List

Apex ARC8 17x8.5" ET40 Square Wheel Set APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

Show More Show Less

APEX EC-7 19x9.5" ET22 Anthracite Wheel 22.9lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:201364

Part#: EC71995ET22AN

Ships in 5 Business Days

$ 459.00 USD

Add to Wish List

Qty

$ 459.00 USD

Add to Wish List

19x10" ET25 APEX EC-7 Wheel 23.5lbs.

Wheel Specs
Fitment:	Mostly Rear
Size:	19x9.5"
Offset (mm):	22
Weight (lbs):	22.9
Profile:	3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

18" VS5RS APEX Square Wheel Set

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:19395608

Part#: VS5RS189535SQ

Ships in 5 Business Days

Starting at $ 2,956.00 USD

Add to Wish List

Starting at $ 2,956.00 USD

Add to Wish List

Apex VS5RS 18x9.5" ET35 Wheel Set Apex 9.5" wheel set for the front and rear of your BMW. These are a bit wider than stock to put more rubber to the road. This helps to reduce understeer on cars with staggered wheel sets and gives you the option to rotate tires. If you're tracking your BMW you should absolutely have a square wheel set (the same size front and rear). Adding a wider wheel will get you more rubber where it counts - reducing understeer and improving initial turn-in. APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

Show More Show Less

19" APEX ARC-8RT Staggered Wheel Set - Choose Your Finish!

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:40478148

Part#: ARC8RT19910

Ships in 5 Business Days

Starting at $ 3,276.00 USD

Add to Wish List

Starting at $ 3,276.00 USD

Add to Wish List

Apex ARC-8RT 19x9" ET30 & 19x10" ET25 Staggered Wheel Set Introducing the Apex ARC-8RT, part of our Touring Line of forged wheels. A timeless classic, reborn as a fully forged wheel. Fully forged 6061-T6 aluminum Reinforced Sprint™ spec inner lip Stronger, yet thinner spokes Deeper concave profile Improved brake clearance OEM center cap compatibility Unmatched replacement program Lifetime structural warranty Independently tested *Aftermarket wheels above stock sizes may require certain amounts of fitment modification to prevent damage to the wheel or interior wheel well components. Fender rolling, spacers, or camber adjustment may be necessary for perfect fitment.

Show More Show Less

F3X APEX EC-7 19x8.5"/9.5" Staggered Wheel Set - Silver

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:386868

Part#: F3XEC7198595S

Ships in 5 Business Days

$ 1,730.00 USD

Add to Wish List

Qty

$ 1,730.00 USD

Add to Wish List

Upgrade your BMW with APEX wheels, renowned for their superior strength and lightweight construction achieved through the innovative Flow-formed semi-forging process. These wheels boast an impressive average weight reduction of 10lbs or more, enhancing performance by reducing unsprung weight. Engineered with spacious spoke and barrel design, they provide ample room for brake systems while maintaining a classic motorsports aesthetic that perfectly complements the aggressive BMW style. With APEX wheels, your BMW will not only look its best but also perform with confidence on the road.

Enhanced strength and lightweight performance
Innovative Flow-formed semi-forging process
Average weight reduction of 10lbs or more
Ample room for brake systems
Classic motorsports design matches BMW's aggressive style

Show More Show Less

APEX SM-10 18x8.5"/9.5" Staggered Wheel Set

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:394135

Part#: SM10APEXSTG1

Ships in 5 Business Days

Starting at $ 1,736.00 USD

Add to Wish List

Starting at $ 1,736.00 USD

Add to Wish List

Apex ARC8 18x8.5" ET35/18x9.5" ET22 Square Wheel Set APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

Show More Show Less

19" APEX ARC-8 Staggered Wheel Set

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:41863726

Part#: ARC819995ST1

Ships in 5 Business Days

Starting at $ 1,776.00 USD

Add to Wish List

Starting at $ 1,776.00 USD

Add to Wish List

This 19" APEX ARC-8 Staggered Wheel Set - F Chassis delivers the perfect balance of strength, weight savings, and aggressive fitment for BMW owners who demand both function and form.

APEX Solid Gloss Black BMW Center Caps - Priced Each

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:639899

Part#: HW-APX-CAP-BLK

Ships in 9 Business Days

$ 9.99 USD

Add to Wish List

Qty

$ 9.99 USD

Add to Wish List

18" APEX ML-10RT Forged Wheels - Set Of Four

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes! Pre-Order: ETA December 2024

T#:31755243

Part#: ML10188540120RKT

Ships in 5 Business Days

$ 2,876.00 USD

Add to Wish List

Qty

$ 2,876.00 USD

Add to Wish List

18" APEX EC-7 Staggered Wheel Set

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:20551655

Part#: EC7189H95ST2

Ships on Sep 28, 2026

Starting at $ 1,616.00 USD

Add to Wish List

Starting at $ 1,616.00 USD

Add to Wish List

Apex ARC8 18x9" ET30/31 18x9.5" ET22 ET25 Staggered Wheel Set APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

Show More Show Less

F22 228/235 APEX EC-7 18" Staggered Wheel Set - Anthracite

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:386837

Part#: F22EC7188595A

Ships in 7 Business Days

$ 1,596.00 USD

Add to Wish List

Qty

$ 1,596.00 USD

Add to Wish List

Upgrade your BMW with APEX wheels, renowned for their superior strength and lightweight construction achieved through the innovative Flow-formed semi-forging process. These wheels boast an impressive average weight reduction of 10lbs or more, enhancing performance by reducing unsprung weight. Engineered with spacious spoke and barrel design, they provide ample room for brake systems while maintaining a classic motorsports aesthetic that perfectly complements the aggressive BMW style. With APEX wheels, your BMW will not only look its best but also perform with confidence on the road.

Enhanced strength and lightweight performance
Innovative Flow-formed semi-forging process
Average weight reduction of 10lbs or more
Ample room for brake systems
Classic motorsports design matches BMW's aggressive style

Show More Show Less

18" APEX ARC-8 Square Wheel Set

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:20551654

Part#: ARC8189H95ST

Ships in 8 Business Days

Starting at $ 1,576.00 USD

Add to Wish List

Starting at $ 1,576.00 USD

Add to Wish List

APEX wheels offer unparalleled strength and lightweight performance, surpassing typical cast wheels with their innovative Flow-formed semi-forging process. With an average weight reduction of 10lbs or more, these wheels significantly decrease unsprung weight, optimizing overall performance. Engineered with ample clearance for brake systems, their design maintains a timeless motorsports aesthetic that complements the bold BMW style. APEX wheels not only enhance the visual appeal of your ride but also elevate its on-road capabilities.

Stronger and lighter than typical cast wheels
Flow-formed semi-forging process ensures superior durability
Significant weight reduction of 10lbs or more improves performance
Ample clearance for brake systems
Timeless motorsports design enhances the BMW's aggressive style

Show More Show Less

18" BBS SX Wheels - Set Of Four

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26005262

Part#: SX0201CBKT

Ships in 2 Business Days

$ 1,680.00 USD

Add to Wish List

Qty

$ 1,680.00 USD

Add to Wish List

18" APEX ML-10RT Forged Wheels - Set Of Four

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:31755231

Part#: ML10189535120AKT

Ships in 5 Business Days

$ 2,956.00 USD

Add to Wish List

Qty

$ 2,956.00 USD

Add to Wish List

APEX ARC-8 18" Staggered Wheel Set - Satin Black

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:386854

Part#: F3XARC818859SB

Back Ordered

$ 1,536.00 USD

Add to Wish List

Qty

$ 1,536.00 USD

Add to Wish List

Specifications: Color - Satin Black Size Front - 18x8.5" ET38 Size Rear - 18x9" ET42

18" SM-10 APEX Square Wheel Set

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:19395605

Part#: SM10189535SQ

In Stock at Vendor

Starting at $ 1,776.00 USD

Add to Wish List

Starting at $ 1,776.00 USD

Add to Wish List

Apex SM-10 18x9.5" ET38 Wheel Set Apex 9.5" wheel set for the front and rear of your BMW. These are a bit wider than stock to put more rubber to the road. This helps to reduce understeer on cars with staggered wheel sets and gives you the option to rotate tires. If you're tracking your BMW you should absolutely have a square wheel set (the same size front and rear). Adding a wider wheel will get you more rubber where it counts - reducing understeer and improving initial turn-in. APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

Show More Show Less

18" BBS SX Wheels - Set Of Four

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26038572

Part#: SX0106SKKT

Ships in 2 Business Days

$ 1,689.00 USD

Add to Wish List

Qty

$ 1,689.00 USD

Add to Wish List

20" BBS XR Wheels - Set Of Four

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26471497

Part#: XR0305MBZKT

Ships in 2 Business Days

$ 2,949.00 USD

Add to Wish List

Qty

$ 2,949.00 USD

Add to Wish List

APEX EC-7 19" Square Wheel Set - Choose Your Finish

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:19560865

Part#: EC71985ET35SMB

Ships in 1 Business Day

Starting at $ 1,716.00 USD

Add to Wish List

Starting at $ 1,716.00 USD

Add to Wish List

19x8.5" ET35 APEX EC-7 Wheel 21.9lbs.

APEX EC-7 19x10.5" ET22 Anthracite Wheel 23.9lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:201376

Part#: EC719105ET22AN

Ships in 5 Business Days

$ 479.00 USD

Add to Wish List

Qty

$ 479.00 USD

Add to Wish List

19x10.5" ET22 APEX EC-7 Wheel 23.9lbs.

Wheel Specs
Fitment:	Front or Rear
Size:	19x10.5"
Offset (mm):	22
Weight (lbs):	23.9
Profile:	3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

18" BBS SX Wheels - Set Of Four

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26005264

Part#: SX0201SKKT

Ships in 2 Business Days

$ 1,680.00 USD

Add to Wish List

Qty

$ 1,680.00 USD

Add to Wish List

F3X EC-7 18x8.5"/9.5" Staggered Wheel Set - Anthracite

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:386860

Part#: F3XEC7188595A

Ships in 5 Business Days

$ 1,596.00 USD

Add to Wish List

Qty

$ 1,596.00 USD

Add to Wish List

Upgrade your BMW with APEX wheels, renowned for their superior strength and lightweight construction achieved through the innovative Flow-formed semi-forging process. These wheels boast an impressive average weight reduction of 10lbs or more, enhancing performance by reducing unsprung weight. Engineered with spacious spoke and barrel design, they provide ample room for brake systems while maintaining a classic motorsports aesthetic that perfectly complements the aggressive BMW style. With APEX wheels, your BMW will not only look its best but also perform with confidence on the road.

Enhanced strength and lightweight performance
Innovative Flow-formed semi-forging process
Average weight reduction of 10lbs or more
Ample room for brake systems
Classic motorsports design matches BMW's aggressive style

Show More Show Less

18" BBS SX Wheels - Set Of Four

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26005261

Part#: SX0102SKKT

Ships on Jul 27, 2026

$ 1,689.00

This product was last offered at the strikethrough price on
07-02-2026

$ 1,637.99 USD

Add to Wish List

Qty

$ 1,637.99 USD

Add to Wish List

F3X EC-7 18x8.5"/9.5" Staggered Wheel Set - Satin Black

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:386861

Part#: F3XEC7188595SB

Ships in 5 Business Days

$ 1,596.00 USD

Add to Wish List

Qty

$ 1,596.00 USD

Add to Wish List

APEX wheels F3X EC-7, A staggered set of wheels designed with superior strength and lightweight construction in mind

APEX ARC-8 18" Staggered Wheel Set - Silver

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:386855

Part#: F3XARC818859S

Ships in 5 Business Days

$ 1,526.00 USD

Add to Wish List

Qty

$ 1,526.00 USD

Add to Wish List

Specifications: Color - Silver Size Front - 18x8.5" ET38 Size Rear - 18x9" ET42

18" BBS SR Wheels - Set Of Four

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26038573

Part#: SR035SGKT

Ships in 2 Business Days

$ 1,789.00 USD

Add to Wish List

Qty

$ 1,789.00 USD

Add to Wish List

18" APEX ML-10RT Forged Wheels - Set Of Four

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:31755230

Part#: ML10189535120GKT

Ships in 5 Business Days

$ 2,956.00 USD

Add to Wish List

Qty

$ 2,956.00 USD

Add to Wish List

18" APEX ML-10RT Forged Wheels - Set Of Four

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:31755226

Part#: ML1018930120GKT

Ships in 5 Business Days

$ 2,916.00 USD

Add to Wish List

Qty

$ 2,916.00 USD

Add to Wish List

18" APEX ML-10RT Forged Wheels - Set Of Four

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:31755224

Part#: ML1018930120AKT

Ships in 5 Business Days

$ 2,916.00 USD

Add to Wish List

Qty

$ 2,916.00 USD

Add to Wish List

18" APEX ML-10RT Forged Wheels - Set Of Four

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:31755225

Part#: ML1018930120RKT

Ships in 5 Business Days

$ 2,916.00 USD

Add to Wish List

Qty

$ 2,916.00 USD

Add to Wish List

18" BBS XR Wheels - Set Of Four

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26038575

Part#: XR0107MBZKT

Ships on Jul 27, 2026

$ 2,109.00

This product was last offered at the strikethrough price on
07-02-2026

$ 2,047.00 USD

Add to Wish List

Qty

$ 2,047.00 USD

Add to Wish List

APEX EC-7 19x10.5" ET22 Satin Black Wheel 23.9lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:201374

Part#: EC719105ET22SMBK

Ships in 5 Business Days

$ 479.00 USD

Add to Wish List

Qty

$ 479.00 USD

Add to Wish List

19x10.5" ET22 APEX EC-7 Wheel 23.9lbs.

Wheel Specs
Fitment:	Front or Rear
Size:	19x10.5"
Offset (mm):	22
Weight (lbs):	23.9
Profile:	3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX EC-7 19x10" ET25 Satin Black Wheel 23.5lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:201371

Part#: EC71910ET25SMBK

Ships in 5 Business Days

$ 469.00 USD

Add to Wish List

Qty

$ 469.00 USD

Add to Wish List

19x10" ET25 APEX EC-7 Wheel 23.5lbs.

Wheel Specs
Fitment:	Mostly Rear
Size:	19x10"
Offset (mm):	25
Weight (lbs):	23.5
Profile:	3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Wheels - Genuine & Performance for BMW 3 Series F31 (2014+)

Sub-Categories

Specs:

Specs:

Specs:

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results