BMW Tools & Specialty Equipment for BMW 3 Series F31 (2014+)

Having a low profile floor jack can be a great asset for your garage, perfect for those with a lowered car as well as those that aren't. Most car owners with a lowered vehicle have been in the position of their floor jack not making the clearance needed, the low profile jack is the answer. 

• Dual pump pistons raises the saddle to maximum height in only 5 pump strokes, with minimum effort.
• Special low profile thick frame side plates and reinforced lift arm for added strength and use.
• Wide track front wheels help provide chassis torsion control and durability.
• Angular positioned pump pistons provide maximum effective pump stroke even when jack is completely under the vehicle.
• Ball bearing mounted rear swivel caster wheels for easy maneuverability.
• Side mounted handles for carrying and easy positioning.
• Overload and bypass safety valve prevents jack overload and over extension.
• Two piece quick release padded handle for storage or transport.

Details:

• Jack Capacity 2 Ton
• Max Lift Height 20"
• Low Height 3.25"
• Chassis Length 26.5"
• Overall Width 13"
• Saddle Diameter 4.5"
• Handle Lenght 50"
• Shipping Weight 50 lbs

The ultra light Schwaben jack stands only weigh 4.7 lbs each. Fit and finish on these stands just shows how much pride in workmanship goes into our stands.These stands are all aluminum construction with heavy-duty  flanged bases to safely stabilize loads. Features 6 locking positions for a secure load in multiple heights. The load pin is extra heavy duty at .584 in. diameter and features a posi lock ball to insure pin stays in place.  

Min. Height is 10.6".

Max Height is 15.4".

Large 7" diameter base.

Outer support tube is 2-1/8" in diameter.

Torx® screwdriver set includes six common bit sizes, perfect for removing door and dashboard panels, interior trim, and smaller underhood components.

Features:

• Hardened tips have center hole for use with both standard or tamper-proof Torx fasteners 
• Large grips add comfort and leverage
• Handle through-holes make them easy to hang from pegboard hooks
• Entire kit packaged in a convenient molded case.
• Sizes include: T10, T15, T20, T25, T27, and T30.

For use with the Schwaben Extractor/Filler System to extract used ATF fluid  or used engine oil out thru the dipstick tube. No need to crawl under the car with this handy set of tubes. 

Features:

• Includes 3 tubes
• Main 41" tube couples directly into the main 6-Liter tank coupling
• Two 35" tubes to be inserted into the dipstick tube and have a slide coupler to connect to main tube
• One dipstick tube is 1/4" OD and the other is 3/16"

*From top of dipstick tube to bottom of pan must be no more than 33" long. 

The Schwaben 1/2" Drive 6 Point Socket Set comprises a dozen 1/2" metric sockets, each featuring 6-point heads specially crafted for navigating those tricky, confined spaces.

Furthermore, our LIFETIME REPLACEMENT program provides you with added assurance, ensuring enduring performance and value. Improve your toolkit with the Schwaben 1/2" Drive 6 Point Socket Set and confidently tackle any task at hand.

Features:

Organized Storage: Included in the set is a practical sliding rail socket holder, helping you maintain a tidy and easily accessible socket arrangement.

Enhanced Grip: Knurled rings encircling the socket bodies ensure a secure hold, even when hands and sockets are covered in oil or grease, minimizing the risk of accidents.

Optimal Torque: The sockets are equipped with corner radii for superior torque distribution, safeguarding fasteners from damage and ensuring efficient performance.

High-Quality Material: Crafted from robust chrome vanadium steel (CR-V), these sockets offer superior wear resistance and toughness compared to high-speed steel, guaranteeing durability and extended lifespan.

Satin Chrome Finish: Not only do the sockets feature an attractive satin chrome finish, but they also provide excellent corrosion resistance, ensuring long-term quality.

Lifetime Replacement: Supported by our lifetime replacement program, this set delivers enduring value and peace of mind, making it a wise addition to your toolkit investment.

Includes:

• 10 mm
• 12 mm
• 13 mm
• 14 mm
• 15 mm
• 16 mm
• 17 mm
• 18 mm
• 19 mm
• 21 mm
• 22 mm
• 24 mm

The Pneumatic CV Boot Installer simplifies CV boot installation through air power. Its sturdy metal fingers stretch the boots, enabling effortless slipping over constant velocity joints without the need to remove them from the axle.

This efficient tool reduces the once time-consuming two-hour task to a mere 20-minute job, saving significant labor and effort. Operating it is a breeze?all you need is an air compressor, making it convenient for both professionals and enthusiasts in the automotive industry.

Crucially, it works exclusively with flexible CV boots, and is not compatible with plastic boots. With its user-friendly design, this installer is a game-changer in automotive maintenance, offering a hassle-free solution for CV boot installation.

Plus, our Air Powered CV Boot Installer comes with a LIFETIME REPLACEMENT guarantee, ensuring you never have to worry about spending hours on boot installations again!

Achieve flawless camshaft alignment on your BMW N20 and N26 engines with the Schwaben N20/N26 Timing Tool Kit. Designed to precisely align camshaft timing at the TDC position and lock the VANOS system for accurate sprocket installation, this tool set is a must-have for any timing job.

Securely stored in a durable blow-molded case, this kit is both easy to store and transport. The Schwaben N20/N26 Timing Tool Kit is a crucial addition to any professional or DIY mechanic's toolkit, ensuring the precision and dependability required for peak engine performance.

Additionally, our LIFETIME REPLACEMENT program guarantees that we will take care of any issues you may encounter with the set, so you can focus on the task at hand!

Includes:

• Camshaft Locking Tool
• Camshaft Fixating Base
• T.D.C. Alignment Pin (83300495070)
• Chain Tensioner
• M6 x P1.0 L: 130mm
• M6 x P1.0 L: 60mm
• M6 x P1.0 L: 45mm (Quantity: 2)

Other Tools Needed:

• BMW Flex Plate Lock Tool (We Suggest: T584148 - CTA N20/N26 Flywheel Holder)
• Oil Pump Lock Kit (If removing oil pump) (We Suggest: T586212 - CTA Oil Seal Repair Kit)
• 8mm Socket/Wrench (We Suggest: T363185 - Combo Wrench Set)
• 10mm Socket/Wrench (We Suggest: T363185 - Combo Wrench Set)
• 13mm Socket/Wrench (We Suggest: T363185 - Combo Wrench Set)
• 14mm Socket/Wrench (We Suggest: T363185 - Combo Wrench Set)
• 16mm Socket/Wrench (We Suggest: T363185 - Combo Wrench Set)
• 17mm Socket/Wrench (We Suggest: T363185 - Combo Wrench Set)
• 22mm Socket/Wrench (We Suggest: T21209842 - 1/2" Dr. Socket Set)
• 24mm Socket/Wrench (We Suggest: T21209842 - 1/2" Dr. Socket Set)
• 27mm Socket/Wrench (We Suggest: T361018 - 1/2" Dr. 27mm Socket)
• E6 Socket (We Suggest: T363279 - E Torx Socket Set)
• E7 Socket (We Suggest: T363279 - E Torx Socket Set)
• E8 Socket (We Suggest: T363279 - E Torx Socket Set)
• E10 Socket (We Suggest: T363279 - E Torx Socket Set)
• E20 Socket (We Suggest: T363279 - E Torx Socket Set)
• T30 Socket (We Suggest: T386445 - Torx Socket Set)
• T40 Socket (We Suggest: T386445 - Torx Socket Set)
• T45 Socket (We Suggest: T386445 - Torx Socket Set)
• 5mm Hex Socket (We Suggest: T21209844 - 1/4" Dr. Socket Set)
• 8mm Hex Socket (We Suggest: T21209844 - 1/4" Dr. Socket Set)

Replaces BMW OEM Tools:

• 83302212831
• 83302212830
• 83302219548
• 83300495070
• 1197340

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

The Universal 40 Piece Metric Socket Set includes all of the necessary tools to create a socket set by purchasing only one ratchet. The included 3/8-inch drive flex head ratchet and two female 3/8-inch drive adapters will allow you to use 3 different drive sizes of sockets: 1/4", 3/8", and 1/2"! Use this kit to help complete your tool kit until you decide to purchase more ratchet sizes, and when you do, you don't have to get rid of any of these tools to do so, which is possible with the adapters.

And of course, this kit is included in our LIFETIME REPLACEMENT program!

Includes:

• 4 mm (1/4" Drive)
• 4.5 mm (1/4" Drive)
• 5 mm (1/4" Drive)
• 5.5 mm (1/4" Drive)
• 6 mm (1/4" Drive)
• 7 mm (1/4" Drive)
• 8 mm (1/4" Drive and 3/8" Drive)
• 9 mm (1/4" Drive and 3/8" Drive)
• 10 mm (1/4" Drive, 3/8" Drive, and 1/2" Drive)
• 11 mm (1/4" Drive and 3/8" Drive)
• 12 mm (1/4" Drive and 3/8" Drive, and 1/2" Drive)
• 13 mm (1/4" Drive and 3/8" Drive, and 1/2" Drive)
• 14 mm (1/4" Drive and 3/8" Drive, and 1/2" Drive)
• 15mm (3/8" Drive and 1/2" Drive)
• 16mm (3/8" Drive and 1/2" Drive)
• 17mm (3/8" Drive and 1/2" Drive)
• 18mm (3/8" Drive and 1/2" Drive)
• 19mm (3/8" Drive and 1/2" Drive)
• 21mm (1/2" Drive)
• 22mm (1/2" Drive)
• 24mm (1/2" Drive)

The NOCO GBC003 Boost HD Precision Battery Clamps are heavy-duty clamps crafted for use with 12-volt gas and diesel engines. These clamps feature a needle-nose profile, allowing them to fit any shape or size battery terminal, from small terminals in tight spaces to top and side post batteries, as well as large terminal sizes. Their robust and rugged springs ensure maximum current flow with minimal power loss. Additionally, the Boost HD Precision accessory boasts no-melt and smoke-free properties, high current transferability, and reinforced all-metal construction.

Features: 

• Heavy-duty battery clamp designed for both 12-volt gas and diesel engines.
• Needle-nose clamp profile for jump starting hard-to-reach and oversized battery terminals.
• Made from durable, heat stabilized 8 AWG silicone wire that maintains its flexibility in cold weather environments.
• Engineered to efficiently transfer maximum current flow with minimal power loss.
• Compatible with the GB20, GB40, GB50, and GBX45 UltraSafe Lithium Jump Starters.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Introducing the TPMS Starter Kit! Dive into TPMS servicing with ease using the included TPMS service tool and four sensors. Plus, enjoy peace of mind with our LIFETIME REPLACEMENT program, ensuring this kit remains by your side for the long haul!

T2000 TPMS SERVICE TOOL:

The Foxwell T2000WF is a professional TPMS diagnostic and maintenance tool that can activate and decode universal TPMS sensors, program TPMS, and diagnose any OEM tire pressure monitoring system. Featuring updated hardware for quicker operation and all-new software for increased capability, the T2000WF provides a complete, full-service solution for owners of TPMS-equipped vehicles.

Key Features:

Sensor Activation and Decoding: The T2000WF can activate and read data from universal TPMS sensors, ensuring they function correctly.

Sensor Programming: Allows for programming TPMS sensors to replace faulty ones or install new sensors when needed.

System Diagnostics: This tool diagnoses the vehicle's TPMS to identify and troubleshoot issues within the system.

WiFi Connectivity: The 'WF' in T2000WF indicates WiFi capabilities, enabling wireless updates and seamless data transfer.

User-Friendly Interface: Designed with an intuitive interface to facilitate ease of use for technicians and automotive enthusiasts.

This tool suits automotive professionals and enthusiasts seeking a reliable solution for TPMS-related services. If you're in need of a comprehensive, full-service diagnostic tool for your Tire Pressure Monitoring System equipped vehicle, look no further than the Foxwell T2000WF.

METAL T20 TPMS SENSORS:

The Foxwell T20 TPMS sensor integrates both 315 MHz and 433 MHz frequencies, replacing more than 99% of OEM direct TPMS sensors on the market. The all-new, high-precision air valve prevents air leakage and provides a durable seal - an upgrade over the outgoing T10. Its proprietary sensor body features a long-lasting, lightweight 3V battery and supports unlimited wireless programming.

Features:

Rubber valve stem Supports 315MHz and 433MHz frequencies High-precision air valve to avoid air leakage 0-30° adjustability Built-in battery with an extended service life (more than 5 years) Temperature reading range of -40°F to 257°F Pressure monitoring range of 0 to 130.53 psi 12G weight

Discover the precision and durability of our 13 Piece XZN Triple Square Driver Set. Each driver is ingeniously designed as a 2-piece unit, seamlessly integrating the bit and socket for effortless use. Crafted from top-tier S2 Steel, these standard-length drivers provide optimal reach and grip, catering to a diverse range of tasks.

Spanning from 4mm to 18mm, these drivers are your versatile solution, perfect for automotive repairs or intricate DIY projects. Organized in a foam padding, they stay secure and readily available whenever you need them.

With our commitment to quality, these drivers are backed by our LIFETIME REPLACEMENT program, ensuring your confidence in every task. Upgrade your toolkit today and experience the ease of working with high-quality tools tailored to meet your demands.

Includes:

• Foam casing
• 4 mm
• 5 mm
• 6 mm
• 7 mm
• 8 mm
• 9 mm
• 10 mm
• 11 mm
• 12 mm
• 13 mm
• 14 mm
• 16 mm
• 18 mm

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

PADDED CREEPER:

Having a creeper can make working under the car much easier and more comfortable, roll in and out, padding, and keeping those clothes a bit cleaner. 

 Features:

• Thick fully padded leatherette cover.
• 40" long with heavy-duty metal support frame.
• 1"" steel tube frame.
• Four position adjustable headrest.
•  Six 2 1/2"oil-resistant rollers.
• Powder coated frame to resist rusting.
• Overall dimensions: 17" x 40" X 4"
• Ground clearance: 1-1/2"
• Ball bearing swivels on wheels.
• 250lb capacity.

PADDED CREEPER SEAT:

This rolling creeper seat is the  ideal height for many jobs. If you are working on the lower half of your car, this seat is a must have. Brakes, wheels, waxing, washing and more. 

Features:

• 2-1/2" thick padded leatherette seat.
• 14" high. x 14" wide x 20" long.
• 1" steel tube frame.
• Divided tool tray below seat.
• Four 2" wheels.
• 2-1/2" ground clearance.
• Ball bearing swivels on all wheels.
• 250 lb capacity.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.