Select Vehicle
BMW
Mini
Please ensure your correct model is selected
This product was last offered at the strikethrough price on
04-27-2026
This product was last offered at the strikethrough price on
04-27-2026
A high-performance street pad with much-improved braking performance and without the levels of dust from a factory pad. The Street 5.0 pads are perfect for drivers who don’t want an ordinary replacement pad and want something that will hold up during aggressive street driving. The Street 5.0 pads are similar to the established Hawk HPS pads but with more initial bite. While the HPS pads fill the need of a direct replacement OEM-type pad, the Street 5.0 kicks braking performance into the next gear. With the Street 5.0 pads you can expect:
Fits the following BMWs:
2012+ F30/31/34 BMW 328i/i xDrive, 330i/i xDrive, 335i/i xDrive, 340i/i xDrive - Without M Sport Brakes
2012+ F32/33/36 BMW 428i/i xDrive, 430i/i xDrive, 435i/i xDrive, 440i/i xDrive - Without M Sport Brakes
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This kit from Active Autowerke replaces the weak plastic charge pipe with a new aluminum part, secured with a high-quality silicone couple. When you're building a high-powered turbocharged engine, or even just looking for peace of mind on a stock application, durability modifications are just as important - if not more important - than adding power. If your charge pipe fails, it results in a huge vacuum leak that sends your ECU into limp mode, diminishing performance significantly. Don't wait - upgrade your charge pipe today!
This product fits the following BMWs:
2016+ F87 M2
2014+ F22 M235i
2012+ F30 335i
2014+ F32 / F33 / F36 435i
The Hawk DTC (Dynamic Torque Control) compound offers the highest friction coefficient of any Hawk pad. The DTC pads offer extremely high torque with aggressive controllable initial bite, superior release and torque control characteristics. These DTC-60 pads have less torque than the similar DTC-70 pads.
Featuring:
*Not for vehicles with Carbon Ceramic brake rotors.
The Hawk DTC (Dynamic Torque Control) compound offers the highest friction coefficient of any Hawk pad. The DTC pads offer extremely high torque with aggressive controllable initial bite, superior release and torque control characteristics. These DTC-60 pads have less torque than the similar DTC-70 pads.
Featuring:
*Not for vehicles with Carbon Ceramic brake rotors.
A high-performance street pad with much-improved braking performance and without the levels of dust from a factory pad. The Street 5.0 pads are perfect for drivers who don’t want an ordinary replacement pad and want something that will hold up during aggressive street driving. The Street 5.0 pads are similar to the established Hawk HPS pads but with more initial bite. While the HPS pads fill the need of a direct replacement OEM-type pad, the Street 5.0 kicks braking performance into the next gear. With the Street 5.0 pads you can expect:
This pad set includes pads for both REAR brakes.
These Front Brake Pads fit the following BMWs:
2014+ F22 F23 BMW 228i
2012+ F30 BMW 320i 328i 328i X-Drive Sedan
2012+ F31 BMW 328i X-Drive Touring Wagon
2012+ F32 BMW 428i 428i X-Drive Coupe
2013+ F33 BMW 428i 428i X-Drive Convertible
2012+ F34 BMW 328i 328i X-Drive Gran Turismo
2012+ F36 BMW 328i 328i X-Drive GranCoupe
The Hawk DTC (Dynamic Torque Control) compound offers the highest friction coefficient of any Hawk pad. The DTC pads offer extremely high torque with aggressive controllable initial bite, superior release and torque control characteristics.
Featuring:
*Not for vehicles with Carbon Ceramic brake rotors.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
For over 30 years, Active Autowerke has been the one to turn to for high-quality BMW performance products. Committed to enhancing the performance of BMWs through the highest quality products is what Active Autowerke is all about.
The B46 downpipes are strategically engineered to virtually eliminate the immensely restrictive characteristics of the factory downpipes – therefore reducing radiant heat and increasing performance.
Features Include
NO CEL when using this downpipe
GESI EPA registered high flow and fully OBD2 compliant
Casted upper stainless steel V-Band for precise fitment
3 inch diameter piping allows for maximum power output
Quicker turbo spool
Rated for 500 to 850 hp applications
Withstands up to 1500° F
Can reach operational efficiency within 9 seconds of startup
Easily bolts-on – no cutting or welding required
Durable construction from TIG welded 304 stainless steel
Ultra high flow 400 cell per square inch catalyst
EPA certified for use on OBD2 vehicles (1996 and newer) except in California
304 stainless steel substrate in catalytic converter is furnace braised to the mantle for outstanding durability
GESi® proprietary precious metal loading technology ensures greatly reduced emissions
Both passengers and drivers are safe from harmful emissions and noise
Precise fitment
Made in Miami, Florida
Covered by 5 Year / 50,000 Mile Warranty (on shell and tube ends)
FITMENT NOTE: For G-Chassis models (G20, G22), the cutoff build date of 08/2020 is important as cars produced after that date have a downpipe with different bracket locations. Cars with a build date of 08/2020 and earlier have the brackets in a V configuration. Cars with a build date of 09/2020 and later have the brackets in a straight line and require Active Autowerke p/n 11-065G
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
A high-performance street pad with much-improved braking performance and without the levels of dust from a factory pad. The Street 5.0 pads are perfect for drivers who don’t want an ordinary replacement pad and want something that will hold up during aggressive street driving. The Street 5.0 pads are similar to the established Hawk HPS pads but with more initial bite. While the HPS pads fill the need of a direct replacement OEM-type pad, the Street 5.0 kicks braking performance into the next gear. With the Street 5.0 pads you can expect:
This pad set includes pads for both FRONT brakes.
These Front Brake Pads fit the following BMWs:
2014+ F22 F23 BMW 228i 228i X-Drive
2012+ F30 BMW 320i 328i 328i X-Drive Sedan
2012+ F31 BMW 328i X-Drive Touring Wagon
2012+ F32 BMW 428i 428i X-Drive Coupe
2013+ F33 BMW 428i 428i X-Drive Convertible
2012+ F34 BMW 328i 328i X-Drive Gran Turismo
2012+ F36 BMW 328i 328i X-Drive GranCoupe