BMW Exhaust Parts, Mufflers & Catalytic Converters for BMW 4 Series F33 (2014+)

Still have the factory exhaust fitted to your B58? You don't know what your missing. Free up lost performance with a new full cat-back exhaust complete with factory valve control!

The B58 engine earned the badge "Worlds 10 Best Engines" four times as of 2023. In 2016 the single turbo straight six found its way to the leaderboards for the first time and followed up in 2017, 2019, and 2020 staying on the charts as one of the best engines in the WORLD.

Our new cat-back exhaust is designed to take out restrictions, maximize flow and give your B58 a signature exhaust note that will excite you on every drive. From the factory your vehicle comes equipped with a combination of three mufflers and resonators that do a great job of silencing the exhaust and restricting flow. There is a center muffler(one restriction), rear section resonator(two restrictions) and a bulky muffler(three restrictions!). With all of those stop gates how do you expect to get the maximum performance out of your vehicle, you simply cannot do so. Lucky for our in-house engineers you no longer have to deal with the quiet and limiting factory exhaust.

To create a cat-back exhaust for this incredible engine the changes happen right after the downpipe. We replaced the factory oval pipe with our full 3.0" T304 stainless steel piping. The true 3.0" exhaust makes its way through the center and rear of the car without the center muffler or resonator to keep flow to a maximum! With smooth mandrel bent transitions our exhaust passes perfectly under the rear subframe for a factory equivalent fit. Positioned in the rear of the car is our signature B58 muffler with beautiful inlet and outlet piping that creates the perfect exhaust tuning. Featuring relief cut slip joints and fabricated sheet metal brackets the exhaust can be fully adjusted and mounted seamlessly in the factory locations. Dual 4.0" exhaust tips are optioned to fill out the open space in the rear diffuser and complete the rear profile of the vehicle.

Part Design:

Turner In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment.
T304 Stainless Material in a natural finish - 1.25mm wall thickness, back purged and TIG-welded throughout
Full 3.0" Stainless Steel Mandrel Bent Tubing
T304 Stainless Steel 12mm barbed exhaust hangers Tig-Welded in OE locations for precise fitment.​
Strategically placed slip joints provide the most adjustability to obtain perfect fitment
Features and Benefits:

Street/Motorsport inspiration
Controlled by factory valves
Reduction in back pressure for increased throttle response, TQ and HP
Dual exit with fitted exhaust tips
Kit Contents:

3.0" front exhaust section (direct fitment to the factory downpipe)
Full 3.0" light weight free-flowing middle muffler sections for better sound, performance and weight savings.
Valved Rear muffler
Clamps and Hardware for an OEM+ install
Optional Turner Exhaust tips - 3.0" Inlet, 4.0" Outlet
Product Development:

Our F Chassis B58 Valved Catback was designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing.

B58 Engine Design:

BMW's first mass produced turbo charged engine, the N54 took the world by storm opening a whole can of worms in the car industry and aftermarket community. A new era of motors were created with the new B58 roughly 9 years after the N54 had been tested and pushed to its limits along with its single turbo companion, the N55. In 2015 the modular engine family was created and the B58 was released into the wild to set a new standard in performance and reliability. Turning back to their roots the B58 engine features a closed-deck engine design similar to the N54 that allows a massive increased in boost pressure capacity and heightened compression ratio. Thought the B58 is similar in weight and size to its predecessor, the new modular engine makes considerably more power right off the rip. With the new block design heat management has been upgraded to reduce the affects of heat cycling to slow the rate of cooling and prevent engine components from failing due to rapid cooling. Just like the N55 the B58 comes fitted with dual vanos, valvetronic and a single twin scroll turbo. Just 8 years experience of this motor we can all agree that the B58 looks like it could be the future of motors to come. This tunable engine has been tested up to 1000hp with the stock block and hosts a platform for the community to break into a whole new class of attainable "supercar killers".

Presenting our Turner Motorsport Performance Cat-Back Exhaust, tailor-made for your 330 or 430. Immerse yourself in an enhanced driving adventure as this meticulously engineered exhaust takes your B46/B48-equipped car to exhilarating new heights. With an unwavering commitment to performance and quality, the Turner exhaust is crafted to unlock the full potential of your F chassis.

Experience a symphony of performance and sound, coupled with a visual upgrade through the quad exit exhaust tips that amplify the motorsport essence of your vehicle. Elevate your driving encounters with the Turner Motorsport cat-back exhaust - unleash the power, reveal the glorious sound, and capture attention wherever you go.

Incorporating their distinctive design principles, this exhaust produces a commanding, deep tone, revealing the bold personality of the revolutionary line of 4-cylinder turbo engines. Leveraging the factory valve control, the Turner cat-back ensures an exciting sound during acceleration, seamlessly blending the high-performance sound with daily driving convenience. Crafted from 1.25mm wall T304 stainless steel, Turner's exhaust boasts superior durability, corrosion resistance, and aesthetic appeal.

Designed with the customer in mind, the installation is a breeze, featuring a straightforward bolt-on process using factory slip joints and mounting locations. Your exhaust system includes all the necessary clamps and hardware for a hassle-free installation. Upgrade your 330/430 with the Turner Motorsport cat-back and let every drive become a statement of power and style.

Upgrading the sound:

Our exhaust allows you to turn up the volume and let the B46/B48 boast its smooth and hearty exhaust tone. Let's be honest, what's the point of owning a B48 if you're not going to upgrade the exhaust? Our signature muffler design allows you to transfer the exhaust valve from your factory system directly onto your new Turner system. The Turner exhaust signature muffler design allows for two flow paths that change both tone and volume. With the vehicle in eco or comfort mode, the valves remain closed, with the closed valves the exhaust system allows the gasses to flow through the muffler toning down the volume and giving a more refined exhaust note. While in driving modes sport or sport+ the valve opens and the flow path changes to a "straight flow path" essentially turning into a straight-piped exhaust for the least amount of restriction and the most amount of B48 sound!

How the cat-back is designed:

To create a cat-back exhaust for this incredible vehicle the upgrade happens right at the downpipe. Turner replaced the factory components with oversized 3.0" T304 stainless steel piping. The true 3.0" exhaust makes its way through the center and rear of the car without the center muffler or resonator to keep the flow to a maximum! With smooth mandrel bent transitions, this exhaust passes perfectly under the rear subframe for a factory equivalent fit. Positioned in the rear of the car is Turner's signature B46/B48 muffler with a beautiful inlet and outlet piping that creates the perfect exhaust tuning. Featuring relief cut slip joints and fabricated sheet metal brackets the exhaust can be fully adjusted and mounted seamlessly in the factory locations. Dual 3.0" exhaust tips are optioned to fill out the open space in the rear diffuser and complete the rear profile of the vehicle.

Features and Benefits:

Street/Motorsport inspiration
Controlled by factory valves
Pronounced dual 3.0" Exhaust tip options
17 lb weight savings (Factory - 55lbs, Turner 38lbs)
Kit Contents:

3.0" front exhaust section
Full 3.0" lightweight free-flowing midsection for better sound, performance, and weight savings.
Valved rear muffler
Valve extension harness
Clamps and hardware for an OEM+ install
Optional dual 3.0" exhaust tips
Optional OBD plug-in
Part Design:

Turner In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment.
T304 Stainless Material in a natural finish - 1.25mm wall thickness, back purged and TIG-welded throughout
Full 3.0" Stainless Steel Mandrel Bent Tubing
T304 Stainless Steel 12mm barbed exhaust hangers Tig-Welded in OE locations for precise fitment.​
Strategically placed slip joints provide the most adjustability to obtain perfect fitment
Optional OBD Plug-In:

The factory-valved muffler is not only controlled by different driving modes like comfort, sport, and sport plus but the RPM also plays into whether the valves are opened or closed. If you are looking for a solution to define whether your exhaust valve is fully opened or closed then you should look into adding an OBD plug-in that features Bluetooth valve control from your phone. During testing, the best way to choose whether your valve is open or closed for your sound preference is through an OBD-linked application on your phone. Included in this kit are optional OBD extensions to not only gain diagnostic function but also gain the ability to influence widgets on your vehicle such as valve position on your valved muffler.

Increase flow, turn up the volume, and shed some weight for the track. These exhaust components are strikingly good looking with beautiful welded pie cut construction and offer weight savings of over 55%. You can drop more than half the weight of your factory exhaust and give your car the aggressive sound it should have came optioned with from the factory.

We set out to amplify the F30/F32 with a proper exhaust system. To accomplish this goal, our engineers increased flow, give you the options to reduce weight by 27lbs, and deliver an exhaust system that captures the full unrestricted sound of the turbo inline-6 N55 engine. The increase in flow is gained from single free flowing 3.0" titanium exhaust pipes that feed into the best designed muffler on the market. Our Turner muffler is specifically designed with flow in mind to ensure that even with the exhaust valves closed, the muffler flows and sounds better than the stock muffler. Weight reduction is achieved by replacing the factory piping with lightweight Ti22 titanium and a full titanium muffler for the most weight advantage possible. The best part of the full titanium exhaust is the capability to control just how aggressive you want to your exhaust to sound, far beyond the point that the factory exhaust is able to perform. All of this plus the direct fitment and straight forward installation leads to our Turner Titanium exhaust being the clear answer in your mission to find the best exhaust for your N55 powered F30.

Part Design:

In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment.
Ultra-lightweight, Gr2 Titanium Alloy Material in a natural finish - 1mm wall thickness, back purged and TIG-welded throughout
3.0"OD tubing full system featuring pie-cut bend sections
Weight savings over the OEM exhaust system:
OEM Downpipe-back (without tips): 48 lbs
Turner Titanium Downpipe-back (without tips): 21 lbs
27 lb weight reduction!
Titanium 10mm barbed exhaust hangers Tig-Welded in OE locations for precise fitment.​
Strategically placed slip joints provide the most adjustability to obtain perfect fitment
Lightweight Gr2 Titanium Valved Muffler Optimized for superior flow over OEM

BMW offers their M Performance retrofit kit for your 340i/i xDrive & 440i/i xDrive for increased power and a more aggressive sounding and free flowing exhaust! This system directly from BMW is perfect for those looking for more power and an aggressive exhaust note without voiding the warranty! Upon installation, an immediate improvement is noticed, especially in the low to mid range powerband. The kit increases your vehicle’s power by 35 hp to 355hp and 39 lb-ft of torque to 369 lb-ft (355 lb-ft for manual transmission vehicles).The BMW M Performance Power kit now comes bundled with a higher flowing, valve controlled exhaust for maximum performance and exhilaration! The BMW M Performance Power Kit features engine tuning software and an electronically controlled valve exhaust system that is actuated in Sport/Sport+ modes via the driving experience control button. 

Included with the Power and Sound Kit:

• M Performance Muffler
• M Performance Decal Kit
• Stick on label and Badge
• Performance BMW software upgrade code
• Wiring Harness

After ordering this kit, simply take this to your dealer to have the ECU re-flashed and all of the components included installed! 

The muffler included must also be used with the following BMW exhaust tips:

• Carbon Fiber - Priced Each
• Chrome - Priced Each

*Dealer pricing for installation varies from dealer to dealer. Please contact your dealer for installation cost before purchasing.
 

The aFe MACH Force-Xp cat-back exhaust system for the BMW N55 delivers uncompromising quality and performance.  3"- 2-1/2" mandrel bent 304 stainless steel tubing and high flow transverse muffler offers optimum exhaust flow and incorporates a factory style exhaust valve to control the exhaust note at all throttle inputs. The system utilizes the factory valve motor and factory performance modes. Closed, it directs the exhaust through the high flow muffler for a smooth, tuned exhaust note. When opened, the exhaust bypasses the muffler to unleash the full performance potential and aggressive note from your N55. Large 4" diameter polished stainless steel exhaust tips come with a laser-etched aFe POWER logo for a stylish finish.

DETAILS:

• +12 HP and +10 lbs. x ft. Torque max gains
• 3" - 2-1/2" mandrel bent, 304 stainless steel for maximum flow
• High flow, transverse muffler with a high-temp powder-coated black finish
• Dual 4" diameter polished stainless steel exhaust tips
• Includes factory style exhaust valve (using factory motor, not included)
• Optional resonator delete pipe is available PN 49-36622
• 100% hand TIG-welded for strength and durability

Performance Gains:
Data coming soon!

304 Stainless Steel Construction:
3" into 2-1/2" mandrel bent 304 stainless steel tubing for maximum performance, corrosion resistance, durability and overall breath-taking appearance.

High-Flow Performance Muffler:
Featuring a corrosion resistant high temp. metallic black powder-coat this high flow, transverse stainless steel muffler improves sound and performance gains across the power band.

Dual 4" Polished Tips:
Finishing off this system are dual 4" diameter, polished stainless steel exhaust tips. The tips come with a laser-etched aFe power logo for a custom, stylish finish.

Exhaust Valve:
Incorporated is a factory style exhaust valve which uses the factory exhaust valve motor (not included). The valve helps regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position and factory performance mode for maximum performance.

Resonator Delete Pipe:
An optional resonator delete pipe is compatible with this exhaust system (not included, sold separately) aFe part number: 49-36622 (No cutting or fabrication required).

TIG-Welded:
100% TIG-Welded by certified craftsmen for race proven strength and durability.

Hassle-Free Installation:
This exhaust system is designed to be a true bolt on system with no cutting or modifications required. Quality hardware is included for a hassle-free installation.

Note:
Will NOT fit xDrive (AWD) Models.

Emissions Disclaimer:
This product does not require a CARB EO# (CARB Aftermarket Parts Verification Guidelines).

All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.

B58 Performance Valved Catback Exhaust - F30, F32, F33, F36:

Still have the factory exhaust fitted to your B58? You don't know what your missing. Free up lost performance with a new full cat-back exhaust complete with factory valve control!

The B58 engine earned the badge "Worlds 10 Best Engines" four times as of 2023. In 2016 the single turbo straight six found its way to the leaderboards for the first time and followed up in 2017, 2019, and 2020 staying on the charts as one of the best engines in the WORLD.

Our new cat-back exhaust is designed to take out restrictions, maximize flow and give your B58 a signature exhaust note that will excite you on every drive. From the factory your vehicle comes equipped with a combination of three mufflers and resonators that do a great job of silencing the exhaust and restricting flow. There is a center muffler(one restriction), rear section resonator(two restrictions) and a bulky muffler(three restrictions!). With all of those stop gates how do you expect to get the maximum performance out of your vehicle, you simply cannot do so. Lucky for our in-house engineers you no longer have to deal with the quiet and limiting factory exhaust.

To create a cat-back exhaust for this incredible engine the changes happen right after the downpipe. We replaced the factory oval pipe with our full 3.0" T304 stainless steel piping. The true 3.0" exhaust makes its way through the center and rear of the car without the center muffler or resonator to keep flow to a maximum! With smooth mandrel bent transitions our exhaust passes perfectly under the rear subframe for a factory equivalent fit. Positioned in the rear of the car is our signature B58 muffler with beautiful inlet and outlet piping that creates the perfect exhaust tuning. Featuring relief cut slip joints and fabricated sheet metal brackets the exhaust can be fully adjusted and mounted seamlessly in the factory locations. Dual 4.0" exhaust tips are optioned to fill out the open space in the rear diffuser and complete the rear profile of the vehicle.

Sound clips! Check out our Product Highlight on the ECS Tuning YouTube channel!

Part Design:

Turner In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment. T304 Stainless Material in a natural finish - 1.25mm wall thickness, back purged and TIG-welded throughout Full 3.0" Stainless Steel Mandrel Bent Tubing T304 Stainless Steel 12mm barbed exhaust hangers Tig-Welded in OE locations for precise fitment.​ Strategically placed slip joints provide the most adjustability to obtain perfect fitment Features and Benefits:

Street/Motorsport inspiration Controlled by factory valves Compatible with factory and aftermarket downpipes (80mm) Reduction in back pressure for increased throttle response, TQ and HP Dual exit with fitted exhaust tips Kit Contents:

3.0" front exhaust section (direct fitment to the factory downpipe) Full 3.0" light weight free-flowing middle muffler sections for better sound, performance and weight savings. Valved Rear muffler Valve extension harness Clamps and Hardware for an OEM+ install Turner Exhaust tips - 3.0" Inlet, 4.0" Outlet Product Development:

Our F Chassis B58 Valved Cat-back was designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing.

B58 Engine Design:

BMW's first mass produced turbo charged engine, the N54 took the world by storm opening a whole can of worms in the car industry and aftermarket community. A new era of motors were created with the new B58 roughly 9 years after the N54 had been tested and pushed to its limits along with its single turbo companion, the N55. In 2015 the modular engine family was created and the B58 was released into the wild to set a new standard in performance and reliability. Turning back to their roots the B58 engine features a closed-deck engine design similar to the N54 that allows a massive increased in boost pressure capacity and heightened compression ratio. Thought the B58 is similar in weight and size to its predecessor, the new modular engine makes considerably more power right off the rip. With the new block design heat management has been upgraded to reduce the affects of heat cycling to slow the rate of cooling and prevent engine components from failing due to rapid cooling. Just like the N55 the B58 comes fitted with dual vanos, valvetronic and a single twin scroll turbo. Just 8 years experience of this motor we can all agree that the B58 looks like it could be the future of motors to come. This tunable engine has been tested up to 1000hp with the stock block and hosts a platform for the community to break into a whole new class of attainable "supercar killers".

Click HERE for Installation Instructions:

Turner Aluminum Charge Pipe - F3x B58:

- Click HERE for Installation Instructions -

The factory B58 charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power.

Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. You can also safely turn up the boost on your B58 once this kit is installed, and not worry about the problematic factory piece.

Whether you have a stock car and are looking for improved throttle response and peace of mind, or a high boost monster in search of reliability in your big horsepower build, this charge pipe is the solution you’ve been looking for!

Design Features and Benefits:

The upper pipe is constructed from 6063 aluminum for increased durability over the factory plastic charge pipe. Can withstand higher boost pressures while offering OE-like fitment.

Billet CNC throttle body flange for OEM fitment.

Black powder coated for exceptional durability and corrosion resistance.

Lower pipe is constructed of 4-ply reinforced silicone hose and a 6061-T6 black anodized aluminum coupler to retain factory fitment to the turbo.

Silicone provides a smooth transition from turbo outlet to the upper aluminum pipe. The silicone also provides good wear resistance wear the charge pipe is in close contact with the turbo inlet and coolant hoses.

The aFe MACH Force-Xp cat-back exhaust system for the BMW N55 exceeds your quality and performance expectations.  3"- 2-1/2" mandrel bent 304 stainless steel tubing and high flow transverse muffler offers maximum exhaust flow and incorporates a factory style exhaust valve to control the exhaust note. The valve utilizes the factory valve motor and factory performance modes. When closed, it directs the exhaust through the high flow muffler for a smooth, tuned exhaust note. When opened, the exhaust is allowed to bypass the muffler and unleash the sound and performance of your N55. Large 4" diameter gloss black stainless steel exhaust tips come with a laser-etched aFe POWER logo for a stylish finish.

DETAILS:

• +12 HP and +10 lbs. x ft. Torque max gains
• 3" - 2-1/2" mandrel bent, 304 stainless steel for maximum flow
• High flow, transverse muffler with a high-temp powder-coated black finish
• Dual 4" diameter gloss black stainless steel exhaust tips
• Includes factory style exhaust valve (using factory motor, not included)
• Optional resonator delete pipe is available PN 49-36622
• 100% hand TIG-welded for strength and durability

Performance Gains:
Data coming soon!

304 Stainless Steel Construction:
3" into 2-1/2" mandrel bent 304 stainless steel tubing for maximum performance, corrosion resistance, durability and overall breath-taking appearance.

High-Flow Performance Muffler:
Featuring a corrosion resistant high temp. metallic black powder-coat this high flow, transverse stainless steel muffler improves sound and performance gains across the power band.

Dual 4" Gloss Black Tips:
Finishing off this system are dual 4" diameter, gloss black, stainless steel exhaust tips. The tips come with a laser-etched aFe power logo for a custom, stylish finish.

Exhaust Valve:
Incorporated is a factory style exhaust valve which uses the factory exhaust valve motor (not included). The valve helps regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position and factory performance mode for maximum performance.

Resonator Delete Pipe:
An optional resonator delete pipe is compatible with this exhaust system (not included, sold separately) aFe part number: 49-36622 (No cutting or fabrication required).

TIG-Welded:
100% TIG-Welded by certified craftsmen for race proven strength and durability.

Hassle-Free Installation:
This exhaust system is designed to be a true bolt on system with no cutting or modifications required. Quality hardware is included for a hassle-free installation.

Note:
Will NOT fit xDrive (AWD) Models

Emissions Disclaimer:
This product does not require a CARB EO# (CARB Aftermarket Parts Verification Guidelines).

All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.

Ensure a perfect seal for your BMW's OEM, VRSF, or aftermarket high flow downpipes with our high-quality Grade 12 installation hardware and gaskets. Each set includes 4 bolts, nuts, washers, and 2 stainless steel gaskets suitable for N54/N55 engines. Designed for years and models specified below, these components guarantee optimal performance and compatibility. Additionally, turbo to downpipe gaskets and clamps are available separately, along with midpipe gaskets for the S55 engine.

• High-quality Grade 12 installation hardware and gaskets
• Ensures a perfect seal for OEM, VRSF, or aftermarket downpipes
• Suitable for N54/N55 engines
• Compatible with specified BMW years and models
• Turbo to downpipe gaskets and clamps available separately

Presenting our Turner Motorsport Performance Cat-Back Exhaust, tailor-made for your 4-cylinder F Chassis. Immerse yourself in an enhanced driving adventure as this meticulously engineered exhaust takes your B48-equipped car to exhilarating new heights. With an unwavering commitment to performance and quality, the Turner exhaust is crafted to unlock the full potential of your F chassis.

Experience a symphony of performance and sound, coupled with a visual upgrade through the quad exit exhaust tips that amplify the motorsport essence of your vehicle. Elevate your driving encounters with the Turner Motorsport axle-back exhaust - unleash the power, reveal the glorious sound, and capture attention wherever you go.

Incorporating their distinctive design principles, this exhaust produces a commanding, deep tone, revealing the bold personality of the revolutionary line of 4-cylinder turbo engines. Leveraging the factory valve control, the Turner axle-back ensures an exciting sound during acceleration, seamlessly blending the high-performance sound with daily driving convenience. Crafted from 1.25mm wall T304 stainless steel, Turner's exhaust boasts superior durability, corrosion resistance, and aesthetic appeal.

Designed with the customer in mind, the installation is a breeze, featuring a straight-forward slip joint and mounting locations. Your exhaust system includes all the necessary clamps and hardware for a hassle-free installation. Upgrade your f chassis with the Turner Motorsport axle-back and let every drive become a statement of power and style.

Upgrading the sound:

This exhaust allows you to turn up the volume and let the 4 cylinder boast its smooth and hearty exhaust tone. Let's be honest, what's the point of owning a f chassis if you're not going to upgrade the exhaust? Turner's signature muffler design allows you to transfer the exhaust valve from your factory system directly onto your new Turner system. The Turner exhaust signature muffler design allows for two flow paths that change both tone and volume. With the vehicle in eco or comfort mode, the valves remain closed, with the closed valves the exhaust system allows the gasses to flow through the muffler toning down the volume and giving a more refined exhaust note. While in driving modes sport or sport+ the valve opens and the flow path changes to a "straight flow path" essentially turning into a straight-piped exhaust for the least amount of restriction and the most amount of B48 sound!

Features and Benefits:

Street/Motorsport inspiration
Controlled by factory valves
Pronounced dual 3.0" Exhaust tip options
Kit Contents:​

Valved rear muffler
Valve extension harness
Clamps and hardware for installation
Single to dual 3.0" exhaust tips
Part Design:

Turner In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment.
T304 Stainless Material in a natural finish - 1.25mm wall thickness, back purged and TIG-welded throughout
T304 Stainless Steel 12mm barbed exhaust hangers Tig-Welded in OE locations for precise fitment.​
Slip joints provide the most adjustability to obtain perfect fitment

Engineered for vehicles with vacuum-actuated exhaust valves, the ECS Remote Vacuum Exhaust Valve Control Kit puts you in complete command of your exhaust sound. This fully standalone system lets you open or close your valves instantly—no reliance on factory controls, drive modes, or complicated wiring.

At its heart is a self-contained vacuum pump and dedicated control module, operating entirely independent of your vehicle’s electronics. The result is broad compatibility with both OEM and aftermarket exhaust systems, allowing for the freedom to switch between aggressive performance sounds and a refined, quiet tone at the touch of a button.

Kit Includes:

Standalone Vacuum Pump – Delivers consistent vacuum for reliable valve function

Wiring Harness Options – Choose from a reversible cigarette lighter power adapter or a length of wire for custom hardwiring

High-Quality Vacuum Hose – Durable, leak-resistant construction for long-lasting performance

Remote Controllers – Compact fobs for easy operation from inside or outside the vehicle

Features:

Instant open/close control for exhaust valves

Operates completely independent of factory electronics

Universal compatibility with vacuum-actuated valve systems

Ideal for both aftermarket and factory exhaust setups

From stealthy early-morning starts to unleashing your exhaust’s full roar on demand, the ECS Remote Vacuum Exhaust Valve Control Kit gives you total control over your car’s voice—whenever and wherever you want it.

Let's be honest—what's the point of owning a B58-equipped BMW if you can't hear it? The F30 340i and F32/F33 440i feature a bulky, suitcase-style rear muffler assembly that muzzles the B58's turbocharged symphony. While cat-back exhaust systems can be a serious investment, our new muffler delete kit offers a cost-effective alternative that delivers all the sound, style, and performance your BMW deserves.

Our system completely transforms the character of your F3X by replacing the restrictive rear muffler with a high-flowing, TIG-welded stainless steel setup that enhances tone, reduces weight, and maintains factory fitment and finish. The Turner Motorsport Muffler Delete Kit features dual 80mm primary tubing that transitions to adjustable 100mm tip sections for a clean yet aggressive look. Up front, the muffler delete kit attaches to the OEM mid-pipe using factory-style sleeve clamps. The connecting pipe is installed at a factory cut location, creating an easy and reversible modification. At the rear, the included sleeve clamps enable easy adjustment and precise tip placement inside the factory rear diffuser.

Features & Benefits:

TIG-welded dual 80mm primary tubing seamlessly transitions to adjustable, twin slash-cut 100mm tip sections, delivering a bold, refined appearance Straightforward cut-and-clamp installation, 100% reversible Sleeve clamps provide full adjustability for effortless alignment and precise tip positioning Utilizes factory exhaust hangers for a clean, bolt-on installation—no cutting or drilling required Installation & Support:

- Click HERE for Installation Instructions -

Experience Enhanced Exhaust Sound Control with Vibrant Performance Bottle-Style Resonators

Vibrant Performance introduces their Bottle-Style resonators engineered with an authentic straight-through perforated core enveloped in premium multi-layer sound suppression materials. These resonators adeptly mitigate exhaust noise while maintaining unrestricted exhaust flow. Crafted from high-quality T304 stainless steel, Vibrant Performance offers a range of applications, ensuring a perfect fit for various vehicle models.

Upgrade your exhaust system with the 2.5" Stainless Steel 3-Bolt Flange - Priced Each. This high-quality flange is designed to provide a durable and reliable connection for your exhaust components. Made from stainless steel, it offers corrosion resistance and longevity, ensuring a lasting performance. Whether you're repairing or customizing your exhaust system, this flange is an essential component for a secure fit.

• Durable stainless steel construction
• Corrosion-resistant for long-lasting performance
• Provides a reliable connection for exhaust components
• Suitable for repair or customization of exhaust systems