BMW Exterior Trim, Body Parts, Aero and Styling for BMW 4 Series F33 (2014+)

CNC Billet License Plate Bracket

T#:27105150

Part#: RE.061

In Stock

$ 119.00 USD

Add to Wish List

Qty

$ 119.00 USD

Add to Wish List

You are looking at the BEST license plate bracket for your BMW, price no object! We never understood why BMW would put a cheap, plastic bracket on the back of a BMW to hold a license plate. The screws holding the bracket on would rust, the steel inserts hold the plate on would also rust, causing the hardware holding the plate on to seize or just no longer function. Our bracket fits any BMW that mounts license plates in the rear that use factory part number 51-18-8-238-061. Fits most BMWs produced AFTER 1999. If your vehicle does not use the plastic plate, it will not fit. Does not fit E46 touring (wagon). PROBLEMS with the factory bracket and hardware The screws that secure the plastic bracket are plated steel and will corrode over time. These two screw would normally not be seen since it is under the license plate, but it is holding the bracket onto the trunk. The four (4) nutserts that are pressed into the plastic frame (to hold the license plate) are also steel and will eventually seize with the bolt and just spin in the plastic frame becoming useless. The plastic frame itself is flimsy, doing a near minimal task of holding on the license plate. The hardware securing the plate to the bracket will rust, seizing to the nutsert or even spinning in place becoming completely useless. SOLUTION Create a more robust bracket that would not only be stiffer but also more corrosion resistant; CNC’d aluminum with an anodized finish. We machine a near identical plate, matching factory dimensions, from 1/2" plate of aluminum. Instead of nutserts pressed into plastic, map the correct position and machine the threads for the hardware directly into the plate. The hardware used to secure the new bracket to the trunk would be made from stainless steel (or optional corrosion-proof titanium) The hardware used to secure the license plate to the newly engineered bracket would also be stainless steel (or optional made from titanium) Kit Includes: One (1) Rogue Engineering designed and manufactured CNC'd aluminum license plate bracket Two (2) Stainless screws to secure bracket to trunk. Four (4) stainless screws to secure license plate to bracket.

Show More Show Less

AFe CONTROL Rear Tow Hook - Red - BMW F22/23 F87 2 Series, F3X F8X 3 ...

T#:1902859

Part#: 450-502002-R

Back Ordered

$ 104.00 USD

Add to Wish List

Qty

$ 104.00 USD

Add to Wish List

Tow hooks are an essential and oftentimes required component to drive your BMW on a track. You never know when an accident or failure will strike and it's important that your BMW can be securely and safely be towed off the track. Add aggressive styling and useful functionality to your BMW with aFe Control’s rear tow hook! Its sleek design not only looks great but is strong enough to safely winch your car onto a tow truck or get towed trackside if the need arises. CNC Machined Components: aFe's BMW-specific CNC machined stem and loop is made of 4130 steel. The stem is black zinc coated for corrosion resistance. The loop is then powder-coated in one of four available colors: Black, Red, Blue, and Gray Vehicle and Front/Rear Specific: This is not a universal tow hook. The stem was specifically designed for the BMW and the length was carefully determined to fit the rear bumper. A proper front tow hook to match is also available. (p/n 450-502001) Pre-Coated Threads: Both the stem and bolt threads are pre-coated with Vibra-tite threadlocker. This keeps your tow hook from loosening due to vibration. The special threadlocker is designed to remain flexible, removable, and reusable. Emissions Disclaimer: This product does not require a CARB EO#.

Show More Show Less

AFe CONTROL Front Tow Hook - Red - BMW F22/23 F87 2 Series, F3X F8X 3...

T#:1902849

Part#: 450-502001-R

Ships in 3 Business Days

$ 104.00 USD

Add to Wish List

Qty

$ 104.00 USD

Add to Wish List

Tow hooks are an essential and oftentimes required component to drive your BMW on a track. You never know when an accident or failure will strike and it's important that your BMW can be securely and safely be towed off the track. Add aggressive styling and useful functionality to your BMW with aFe Control’s front tow hook! Its sleek design not only looks great but is strong enough to safely winch your car onto a tow truck or get towed trackside if the need arises. CNC Machined Components: aFe's BMW-specific CNC machined stem and loop is made of 4130 steel. The stem is black zinc coated for corrosion resistance. The loop is then powder-coated in one of four available colors: Black, Red, Blue, and Gray Vehicle and Front/Rear Specific: This is not a universal tow hook. The stem was specifically designed for the BMW and the length was carefully determined to fit the front bumper. A proper rear tow hook to match is also available. (p/n 450-502002) Pre-Coated Threads: Both the stem and bolt threads are pre-coated with Vibra-tite threadlocker. This keeps your tow hook from loosening due to vibration. The special threadlocker is designed to remain flexible, removable, and reusable. Emissions Disclaimer: This product does not require a CARB EO#.

Show More Show Less

AFe CONTROL Rear Tow Hook - Blue - BMW F22/23 F87 2 Series, F3X F8X 3...

T#:1902858

Part#: 450-502002-L

Ships in 3 Business Days

$ 104.00 USD

Add to Wish List

Qty

$ 104.00 USD

Add to Wish List

Tow hooks are an essential and oftentimes required component to drive your BMW on a track. You never know when an accident or failure will strike and it's important that your BMW can be securely and safely be towed off the track. Add aggressive styling and useful functionality to your BMW with aFe Control’s rear tow hook! Its sleek design not only looks great but is strong enough to safely winch your car onto a tow truck or get towed trackside if the need arises. CNC Machined Components: aFe's BMW-specific CNC machined stem and loop is made of 4130 steel. The stem is black zinc coated for corrosion resistance. The loop is then powder-coated in one of four available colors: Black, Red, Blue, and Gray Vehicle and Front/Rear Specific: This is not a universal tow hook. The stem was specifically designed for the BMW and the length was carefully determined to fit the rear bumper. A proper front tow hook to match is also available. (p/n 450-502001) Pre-Coated Threads: Both the stem and bolt threads are pre-coated with Vibra-tite threadlocker. This keeps your tow hook from loosening due to vibration. The special threadlocker is designed to remain flexible, removable, and reusable. Emissions Disclaimer: This product does not require a CARB EO#.

Show More Show Less

Active Autowerke Signature Trunk Emblem

T#:590914

Part#: AASIGNATUREPLAQU

Ships in 3 Business Days

4% off MSRP $ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD

Add to Wish List

Qty

4% off MSRP

$ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD

Add to Wish List

Stand out from the crowd, and give them a hint of what you've got going on under the hood, with the official Active Autowerke Signature Emblem! The emblem can be placed anywhere on the exterior, or interior of your BMW. Hefty stainless steel construction and durable double-sided tape will help ensure that it is never lost, even at speeds over 170+ MPH...Don't ask us how we know! Represent your favorite BMW tuner for all to see today!

Show More Show Less

AFe CONTROL Front Tow Hook - Blue - BMW F22/23 F87 2 Series, F3X F8X ...

T#:1902848

Part#: 450-502001-L

Ships in 3 Business Days

$ 104.00 USD

Add to Wish List

Qty

$ 104.00 USD

Add to Wish List

Tow hooks are an essential and oftentimes required component to drive your BMW on a track. You never know when an accident or failure will strike and it's important that your BMW can be securely and safely be towed off the track. Add aggressive styling and useful functionality to your BMW with aFe Control’s front tow hook! Its sleek design not only looks great but is strong enough to safely winch your car onto a tow truck or get towed trackside if the need arises. CNC Machined Components: aFe's BMW-specific CNC machined stem and loop is made of 4130 steel. The stem is black zinc coated for corrosion resistance. The loop is then powder-coated in one of four available colors: Black, Red, Blue, and Gray Vehicle and Front/Rear Specific: This is not a universal tow hook. The stem was specifically designed for the BMW and the length was carefully determined to fit the front bumper. A proper rear tow hook to match is also available. (p/n 450-502002) Pre-Coated Threads: Both the stem and bolt threads are pre-coated with Vibra-tite threadlocker. This keeps your tow hook from loosening due to vibration. The special threadlocker is designed to remain flexible, removable, and reusable. Emissions Disclaimer: This product does not require a CARB EO#.

Show More Show Less

POR15 Rust Preventive Semi Gloss Black QT

T#:1575834

Part#: POR45404

Ships in 7 Business Days

$ 132.99 USD

Add to Wish List

Qty

$ 132.99 USD

Add to Wish List

Used by professional body men to prevent rust from returning

AFe CONTROL Front Tow Hook - Black - BMW F22/23 F87 2 Series, F3X F8X...

T#:1902846

Part#: 450-502001-B

In Stock

$ 104.00 USD

Add to Wish List

Qty

$ 104.00 USD

Add to Wish List

Tow hooks are an essential and oftentimes required component to drive your BMW on a track. You never know when an accident or failure will strike and it's important that your BMW can be securely and safely be towed off the track. Add aggressive styling and useful functionality to your BMW with aFe Control’s front tow hook! Its sleek design not only looks great but is strong enough to safely winch your car onto a tow truck or get towed trackside if the need arises. CNC Machined Components: aFe's BMW-specific CNC machined stem and loop is made of 4130 steel. The stem is black zinc coated for corrosion resistance. The loop is then powder-coated in one of four available colors: Black, Red, Blue, and Gray Vehicle and Front/Rear Specific: This is not a universal tow hook. The stem was specifically designed for the BMW and the length was carefully determined to fit the front bumper. A proper rear tow hook to match is also available. (p/n 450-502002) Pre-Coated Threads: Both the stem and bolt threads are pre-coated with Vibra-tite threadlocker. This keeps your tow hook from loosening due to vibration. The special threadlocker is designed to remain flexible, removable, and reusable. Emissions Disclaimer: This product does not require a CARB EO#.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Exterior Trim, Body Parts, Aero and Styling for BMW 4 Series F33 (2014+)

Sub-Categories

CNC Billet License Plate Bracket

AFe CONTROL Rear Tow Hook - Red - BMW F22/23 F87 2 Series, F3X F8X 3 ...

AFe CONTROL Front Tow Hook - Red - BMW F22/23 F87 2 Series, F3X F8X 3...

AFe CONTROL Rear Tow Hook - Blue - BMW F22/23 F87 2 Series, F3X F8X 3...

Active Autowerke Signature Trunk Emblem

AFe CONTROL Front Tow Hook - Blue - BMW F22/23 F87 2 Series, F3X F8X ...

POR15 Rust Preventive Semi Gloss Black QT

AFe CONTROL Front Tow Hook - Black - BMW F22/23 F87 2 Series, F3X F8X...

Select Vehicle

Purpose

Category

Brand

Price

Shipping

Narrow Results