Charge Pipes & Turbo Inlets for BMW 4 Series F36 (2015+)

Upgraded N55 Silicone/Aluminum Turbo Inlet Hose Kit - F Chassis N55 ...

T#:639115

Part#: 028145TMS09KT

In Stock

Sale - Save 20% $ 312.99

This product was last offered at the strikethrough price on
06-14-2026

$ 249.99 USD

Add to Wish List

Qty

Sale - Save 20%

$ 312.99

This product was last offered at the strikethrough price on
06-14-2026

$ 249.99 USD

Add to Wish List

Owning a BMW for any length of time, you are most likely aware of BMW's less-than-stellar reputation for developing weak plastic hoses and other parts. A great example of this are the N55 turbo inlet pipes. Over time, constant temperature swings cause these plastic pipes/hoses to become brittle. This often leads to cracks, splits, or even complete failure, allowing your turbos to suck in unfiltered air. To prevent this from happening to you, we are proud to present our very own Turner Motorsport F-Chassis N55 Upper Silicone & Lower Cast Aluminum Turbo Inlet Hoses!

Show More Show Less

Turner Charge Pipe Upgrade Kit - F22/23 F3X F87 N55

10X Entries For Our Spin To Win Sweepstakes!

T#:584163

Part#: 024592TMS01KT

In Stock

Sale - Save 25% $ 353.99

This product was last offered at the strikethrough price on
06-14-2026

$ 265.49 USD

Add to Wish List

Qty

Sale - Save 25%

$ 353.99

This product was last offered at the strikethrough price on
06-14-2026

$ 265.49 USD

Add to Wish List

The N55 OE charge pipe is prone to failure; after all it is plastic. With constant heat cycling, the factory plastic becomes very brittle over time, leading to cracks and boost leaks, and ultimately entire part failures. The OE charge pipe has also been proven to break once under increased boost pressure. Replace the weak OE charge pipe with the Turner N55 Charge pipe for increased air flow, throttle response, and reliability. You can safely and reliably turn up the boost on your N55 once this kit is installed, and not worry about the problematic factory piece. Whether you have a stock car and are looking for improved throttle response and peace of mind, or a high boost monster in search of reliability in your big horsepower build, this charge pipe is the solution you’ve been looking for! Features: Upper & Lower Charge Pipe 6061-T6 Aluminum construction for increased durability over the factory plastic charge pipe. Can withstand higher boost pressures while offering OE-like fitment. Billet CNC throttle body flange for OEM fitment Mandrel bent 2.85” tubing (larger than stock) for improved airflow and increased performance. Black powder coated for exceptional durability and corrosion resistance. 4-ply reinforced silicone hose and 6061-T6 powder coated aluminum coupler to retain factory fitment to intercooler. Silicone provides a smooth transition from intercooler outlet to throttle body diameter to maximize flow and volumetric efficiency NOTE: C-Clip is not included and must be re-used or purchased new!

Show More Show Less

Turner Turbo Boost Pipe Upgrade - F22/23 F3X F87 N55

T#:584162

Part#: 024592TMS03KT

Ships on Sep 29, 2026

Sale - Save 25% $ 203.99

This product was last offered at the strikethrough price on
06-14-2026

$ 152.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 203.99

This product was last offered at the strikethrough price on
06-14-2026

$ 152.99 USD

Add to Wish List

The N55 OE boost pipe is often prone to failure; after constant heat cycling, the factory plastic becomes very brittle, leading to cracks and boost leaks, and ultimately entire part failures. The OE boost pipe has also been proven to break once under increased boost pressure. Replace the weak OE boost pipe with the new Turner N55 Boost Pipe for increased air flow, increased throttle response, and increased reliability. You can also safely turn up the boost on your N55 once this kit is installed, and not worry about the problematic factory piece. Whether you have a stock car and are looking for improved throttle response and peace of mind, or a high boost monster in search of reliability in your big horsepower build, this charge pipe is the solution you’ve been looking for! Features: Turbo Outlet Boost Pipe (AKA "Hot Side Charge Pipe") 4-ply reinforced silicone for increased durability over the factory rubber hose. 6061-T6 type II black anodized aluminum couplers retain the factory connection to the turbo and intercooler.

Show More Show Less

Turner Complete Charge Pipe Upgrade Kit - F22/23 F3X F87 N55 ...

10X Entries For Our Spin To Win Sweepstakes!

T#:584164

Part#: 024592TMS09KT

Ships on Sep 29, 2026

Sale - Save 25% $ 479.99

This product was last offered at the strikethrough price on
06-14-2026

$ 359.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 479.99

This product was last offered at the strikethrough price on
06-14-2026

$ 359.99 USD

Add to Wish List

Huge upgrade to brittle factory plastic pipes that are prone to failure.

Turner Motorsport Upgraded Silicone Lower Air Intake Pipe (Turbo Inle...

T#:591415

Part#: 026510TMS10KT

Ships on Aug 17, 2026

Sale - Save 15% $ 241.99

This product was last offered at the strikethrough price on
06-14-2026

$ 205.69 USD

Add to Wish List

Qty

Sale - Save 15%

$ 241.99

This product was last offered at the strikethrough price on
06-14-2026

$ 205.69 USD

Add to Wish List

Designed with a smooth contour for unobstructed flow compared to the OE molded plastic. This provides increased turbo response, increased airflow, & less turbo lag. Constructed of 5-Ply reinforced silicone for improved durability. Pair with our Turner upper intake pipe for even more intake noises!

Show More Show Less

Turner Hot Side & Cold Side Charge Pipes - N20

T#:1135776

Part#: 005793LA10KT1

Ships on Sep 21, 2026

Sale - Save 25% $ 466.99

This product was last offered at the strikethrough price on
06-14-2026

$ 350.24 USD

Add to Wish List

Qty

Sale - Save 25%

$ 466.99

This product was last offered at the strikethrough price on
06-14-2026

$ 350.24 USD

Add to Wish List

The factory F3x N20 charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power.

Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. You can also safely turn up the boost on your N20 once this kit is installed, and not worry about the problematic factory piece.

Whether you have a stock car and are looking for improved throttle response and peace of mind, or a high boost monster in search of reliability in your big horsepower build, this charge pipe is the solution.

Features:

- Cold Side Charge Pipe

6061-T6 Aluminum construction for increased durability over the factory plastic charge pipe. Can withstand higher boost pressures while offering OE-like fitment.
Billet CNC throttle body flange for OEM fitment
Mandrel bent 70mm tubing (larger than stock) for improved airflow and increased performance.
Black powder coated for exceptional durability and corrosion resistance.
4-ply reinforced silicone hose and 6061-T6 powder coated aluminum coupler to retain factory fitment to intercooler.
Silicone provides a smooth transition from intercooler outlet to throttle body diameter to maximize flow and volumetric efficiency
- Hot Side Charge Pipe

4-ply reinforced silicone for increased durability over the factory rubber hose.
6061-T6 type II black anodized aluminum couplers retain the factory connection to the turbo and intercooler.

Show More Show Less

Turner Aluminum Charge Pipe - F3x B58

T#:640040

Part#: 029086TMS09KT

Ships on Aug 17, 2026

Sale - Save 25% $ 393.99

This product was last offered at the strikethrough price on
06-14-2026

$ 295.49 USD

Add to Wish List

Qty

Sale - Save 25%

$ 393.99

This product was last offered at the strikethrough price on
06-14-2026

$ 295.49 USD

Add to Wish List

The factory B58 charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power.

Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. You can also safely turn up the boost on your B58 once this kit is installed, and not worry about the problematic factory piece.

Whether you have a stock car and are looking for improved throttle response and peace of mind, or a high boost monster in search of reliability in your big horsepower build, this charge pipe is the solution you’ve been looking for!

Design Features and Benefits:

The upper pipe is constructed from 6063 aluminum for increased durability over the factory plastic charge pipe. Can withstand higher boost pressures while offering OE-like fitment.

Billet CNC throttle body flange for OEM fitment.

Black powder coated for exceptional durability and corrosion resistance.

Lower pipe is constructed of 4-ply reinforced silicone hose and a 6061-T6 black anodized aluminum coupler to retain factory fitment to the turbo.

Silicone provides a smooth transition from turbo outlet to the upper aluminum pipe. The silicone also provides good wear resistance wear the charge pipe is in close contact with the turbo inlet and coolant hoses.

Show More Show Less

ECS Tuning Charge Pipe C-Clip & O-Ring - N54/N55 3.0L

T#:6924322

Part#: 090746ECS09

Back Ordered

Sale - Save 25% $ 43.99

This product was last offered at the strikethrough price on
06-14-2026

$ 32.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 43.99

This product was last offered at the strikethrough price on
06-14-2026

$ 32.99 USD

Add to Wish List

Are you missing your charge pipe O-Ring or C-Clip, or have they been damaged during installation or removal of your charge pipe? This replacement set is the perfect choice for OE-style fitment and function!

Show More Show Less

Turner Motorsport Upgraded Silicone Upper Air Intake Pipe (Turbo Inle...

T#:591418

Part#: 026510TMS11KT

In Stock

Sale - Save 20% $ 189.99

This product was last offered at the strikethrough price on
06-14-2026

$ 151.98 USD

Add to Wish List

Qty

Sale - Save 20%

$ 189.99

This product was last offered at the strikethrough price on
06-14-2026

$ 151.98 USD

Add to Wish List

Constructed of 5-Ply reinforced silicone for improved durability. Designed with a smooth contour for unobstructed flow compared to the OE molded plastic. Increase turbo response, increase airflow, and reduce turbo lag.

Show More Show Less

Turner Upgraded Aluminum Lower Turbo Inlet Pipe - F3x B58

T#:1856019

Part#: 029091TMS01KT

In Stock

Sale - Save 25% $ 222.99

This product was last offered at the strikethrough price on
06-14-2026

$ 167.24 USD

Add to Wish List

Qty

Sale - Save 25%

$ 222.99

This product was last offered at the strikethrough price on
06-14-2026

$ 167.24 USD

Add to Wish List

More airflow to the turbo, improved turbo response, and less turbo lag. Pair with the Turner Intake, to eliminate the factory intake muffler, and gain more intake noise.

ECS Tuning N55 Performance Charge Pipe - BMW F22/23 F87 F3X N55 3.0L ...

T#:6924298

Part#: 090718ECS09

In Stock

Sale - Save 20% $ 438.99

This product was last offered at the strikethrough price on
06-14-2026

$ 351.19 USD

Add to Wish List

Qty

Sale - Save 20%

$ 438.99

This product was last offered at the strikethrough price on
06-14-2026

$ 351.19 USD

Add to Wish List

If you are looking to improve your intake system, a major component to consider is your charge pipe. The stock plastic BMW charge pipe is flimsy, prone to cracking, and restricts airflow at high RPMs. This results in unreliability and restricted power. ECS Tuning's new line of powder-coated Aluminum Charge Pipes are designed to replace your stock pipes, offering increased strength, reliability, and higher airflow! Using aluminum construction and black powder coating, this pipe not only looks great but is structurally stronger and won't crack after long-term exposure to heating/cooling cycles. This is perfect for anyone who is looking for more power, whether the car is stock, or highly modified. Additionally, all OE ports are retained and all clips and seals are included for installation! There's no longer a need to reuse your stock clip and o-ring. As an added bonus, water/meth bungs have been added to the design for those who are looking to get the highest levels of performance out of their BMW's engine! Features: OEM Fitment Increased diameter and airflow Increase throttle response and decreases turbo lag. Powder-coated black aluminum piping. CNC Machined Throttle Body Flange Includes two 1/8' NPT bungs for meth/water injection. Includes everything necessary to upgrade from factory chargepipe. 3-Ply Reinforced Silicone Couplers 1-Year Limited Warranty against defects or workmanship

Show More Show Less

Turner MotorSport Hot Side Charge Pipe - N20

T#:1135808

Part#: 005793LA10KT

Ships on Sep 21, 2026

Sale - Save 25% $ 200.99

This product was last offered at the strikethrough price on
06-14-2026

$ 150.74 USD

Add to Wish List

Qty

Sale - Save 25%

$ 200.99

This product was last offered at the strikethrough price on
06-14-2026

$ 150.74 USD

Add to Wish List

The N20 OE charge pipe is often prone to failure; after constant heat cycling, the factory plastic becomes very brittle, leading to cracks and boost leaks, and ultimately entire part failures. The OE charge pipe has also been proven to break once under increased boost pressure. Replace the weak OE charge pipe with the new Turner N20 Charge pipe for increased air flow, increased throttle response, and increased reliability. You can also safely turn up the boost on your N20 once this kit is installed, and not worry about the problematic factory piece. Whether you have a stock car and are looking for improved throttle response and peace of mind, or a high boost monster in search of reliability in your big horsepower build, this charge pipe is the solution you’ve been looking for! Features: Hot Side Charge Pipe 4-ply reinforced silicone for increased durability over the factory rubber hose. 6061-T6 type II black anodized aluminum couplers retain the factory connection to the turbo and intercooler.

Show More Show Less

F22/23 F3x Turner Motorsport Charge Pipes & Intercooler Kit

T#:599060

Part#: 024592TMS09KT2

Ships on Sep 29, 2026

Sale - Save 20% $ 1,262.99

This product was last offered at the strikethrough price on
06-14-2026

$ 1,010.39 USD

Add to Wish List

Qty

Sale - Save 20%

$ 1,262.99

This product was last offered at the strikethrough price on
06-14-2026

$ 1,010.39 USD

Add to Wish List

The N55 OE charge pipe is prone to failure; after constant heat cycling, the factory plastic becomes very brittle, leading to cracks and boost leaks, and ultimately entire part failures. The OE charge pipe has also been proven to break once under increased boost pressure. Replace the weak OE charge pipe with the Turner Motorsport N55 Charge pipe for increased air flow, and increased throttle response. You can also safely turn up the boost on your N55 once this kit is installed, and not worry about the problematic factory piece. The perfect compliment to the increased airflow form the Turner Motorsport charge pipes is a intercooler. Turner Motorsport has developed an intercooler upgrade that is far superior to the stock unit. Constructed from cast aluminum with a bar and plate design, this intercooler increases both cross sectional area and frontal surface area by 56%. This increase in area has shown a 45 degree decrees in intake temperature resulting in 18 wheel horsepower and 10 lb/ft of torque on its own.

Show More Show Less

Turner Cold Side Charge Pipe - N20

For vehicles with an Automatic Transmission

T#:2073438

Part#: 005793LA09KT

Ships on Aug 26, 2026

Sale - Save 25% $ 331.99

This product was last offered at the strikethrough price on
06-14-2026

$ 248.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 331.99

This product was last offered at the strikethrough price on
06-14-2026

$ 248.99 USD

Add to Wish List

Factory Charge Pipes are prone to cracks and blowouts, Upgrade to the Turner Cold Side Charge Pipe kit for increased performance and reliability!

Turner Motorsport Upgraded Silicone Air Intake Pipes (Turbo Inlets) -...

T#:591459

Part#: 026510TMS09KT

Ships on Aug 17, 2026

Sale - Save 20% $ 461.99

This product was last offered at the strikethrough price on
06-14-2026

$ 369.57 USD

Add to Wish List

Qty

Sale - Save 20%

$ 461.99

This product was last offered at the strikethrough price on
06-14-2026

$ 369.57 USD

Add to Wish List

Designed with a smooth contour for unobstructed flow compared to the OE molded plastic. Increased turbo response, increased airflow, less turbo lag. Constructed of 5-Ply reinforced silicone for improved durability.

Show More Show Less

ECS Tuning Charge Pipe & Boost Pipe Kit - BMW F22/23 F3X G01/02 G30 G...

T#:6924294

Part#: 090722ECS09

In Stock

Sale - Save 3% $ 321.99

This product was last offered at the strikethrough price on
06-14-2026

$ 312.33 USD

Add to Wish List

Qty

Sale - Save 3%

$ 321.99

This product was last offered at the strikethrough price on
06-14-2026

$ 312.33 USD

Add to Wish List

If you are looking to improve your intake system, a major component to consider is your charge pipe and boost pipe. The stock plastic BMW charge pipe is flimsy, prone to cracking, and restricts airflow at high RPMs. This results in unreliability and restricted power. ECS Tuning's new line of powder-coated Aluminum Charge Pipes are designed to replace your stock pipes, offering increased strength, reliability, and higher airflow! Using aluminum construction and black powder coating, this pipe not only looks great but is structurally stronger and won't crack after long-term exposure to heating/cooling cycles. This is perfect for anyone who is looking for more power, whether the car is stock, or highly modified. Additionally, all OE ports are retained and all clips and seals are included for installation! There's no longer a need to reuse your stock clip and o-ring. As an added bonus, a water/meth bung has been added to the design for those who are looking to get the highest levels of performance out of their BMW's engine! Features: OEM Fitment Increased diameter and airflow Increase throttle response and decreases turbo lag. Powder-coated black aluminum piping. CNC Machined Throttle Body Flange Includes one 1/8' NPT bung for meth/water injection. Includes everything necessary to upgrade from factory chargepipe. 3-Ply Reinforced Silicone Couplers 1-Year Limited Warranty against defects or workmanship

Show More Show Less

ECS Tuning Turbo Intake Pipe Upgrade - BMW F2X/F3X B48/B46 2.0L ...

T#:6924266

Part#: 090724ECS09

Ships on Dec 1, 2026

Sale - Save 10% $ 257.99

This product was last offered at the strikethrough price on
06-14-2026

$ 232.19 USD

Add to Wish List

Qty

Sale - Save 10%

$ 257.99

This product was last offered at the strikethrough price on
06-14-2026

$ 232.19 USD

Add to Wish List

BMW's OE intake pipe (13718601681) leaves a lot to be desired thanks to its plastic construction and tight bends. This leads to potential cracking from heat cycle fatigue as well as limited, turbulent airflow. Improve the airflow to your BMW's turbos with this ECS Tuning Intake Pipe Upgrade! Featuring full aluminum construction, black powder coating, smooth bends, and all the necessary installation components, this intake pipe is an easy plug-and-play addition to your BMW! Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume

Show More Show Less

Active Autowerke - Upgraded Air Charge Pipe - N55 F30, F32, F34, F87 ...

For RWD models only

T#:397303

Part#: 15-004

Ships in 4 Business Days

$ 284.99 USD

Add to Wish List

Qty

$ 284.99 USD

Add to Wish List

This kit from Active Autowerke replaces the weak plastic charge pipe with a new aluminum part, secured with a high-quality silicone couple. When you're building a high-powered turbocharged engine, or even just looking for peace of mind on a stock application, durability modifications are just as important - if not more important - than adding power. If your charge pipe fails, it results in a huge vacuum leak that sends your ECU into limp mode, diminishing performance significantly. Don't wait - upgrade your charge pipe today!

This product fits the following BMWs:
2016+ F87 M2
2014+ F22 M235i
2012+ F30 335i
2014+ F32 / F33 / F36 435i

Show More Show Less

ECS Tuning Charge Pipe & Boost Pipe Kit - F2X/F3X N55 3.0L

T#:4154610

Part#: 090699ECS09

In Stock

Sale - Save 5% $ 509.99

This product was last offered at the strikethrough price on
06-14-2026

$ 484.49 USD

Add to Wish List

Qty

Sale - Save 5%

$ 509.99

This product was last offered at the strikethrough price on
06-14-2026

$ 484.49 USD

Add to Wish List

If you are looking to improve your intake system, a major component to consider is your charge pipe and boost pipe. The stock plastic BMW charge pipe is flimsy, prone to cracking, and restricts airflow at high RPMs. This results in unreliability and restricted power. ECS Tuning's new line of powder-coated Aluminum Charge Pipes are designed to replace your stock pipes, offering increased strength, reliability, and higher airflow! Using aluminum construction and black powder coating, this pipe not only looks great but is structurally stronger and won't crack after long-term exposure to heating/cooling cycles. This is perfect for anyone who is looking for more power, whether the car is stock, or highly modified. Additionally, all OE ports are retained and all clips and seals are included for installation! There's no longer a need to reuse your stock clip and o-ring. As an added bonus, water/meth bungs have been added to the design for those who are looking to get the highest levels of performance out of their BMW's engine! Features: OEM Fitment Increased diameter and airflow Increase throttle response and decreases turbo lag. Powder-coated black aluminum piping. Includes two 1/8' NPT bungs for meth/water injection. Includes everything necessary to upgrade from factory chargepipe. 3-Ply Reinforced Silicone Couplers 1-Year Limited Warranty against defects or workmanship

Show More Show Less

ECS Tuning Intake Pipe Upgrade - BMW F22/23 F3X N20 2.0L

T#:6924320

Part#: 090731ECS09

Ships on Aug 6, 2026

Sale - Save 10% $ 257.99

This product was last offered at the strikethrough price on
06-14-2026

$ 232.19 USD

Add to Wish List

Qty

Sale - Save 10%

$ 257.99

This product was last offered at the strikethrough price on
06-14-2026

$ 232.19 USD

Add to Wish List

BMW's OE intake pipe (13717605045) leaves a lot to be desired thanks to its plastic construction and tight bends. This leads to potential cracking from heat cycle fatigue as well as limited, turbulent airflow. Improve the airflow to your BMW's turbos with this ECS Tuning Intake Pipe Upgrade! Featuring full aluminum construction, black powder coating, smooth bends, and all the necessary installation components, this intake pipe is an easy plug-and-play addition to your BMW! Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume

Show More Show Less

ECS Tuning Charge Pipe & Intake Pipe Kit - BMW F22/23 F3X B48/B46 2.0...

T#:6924289

Part#: 090773ECS09

Ships in 9 Business Days

Sale - Save 5% $ 530.99

This product was last offered at the strikethrough price on
06-14-2026

$ 504.44 USD

Add to Wish List

Qty

Sale - Save 5%

$ 530.99

This product was last offered at the strikethrough price on
06-14-2026

$ 504.44 USD

Add to Wish List

If you are looking to improve your intake system, a major component to consider is your charge pipe and intake pipe. The stock plastic BMW charge pipe is flimsy, prone to cracking, and restricts airflow at high RPMs. This results in unreliability and restricted power. ECS Tuning's new line of powder-coated Aluminum Charge Pipes are designed to replace your stock pipes, offering increased strength, reliability, and higher airflow! Using aluminum construction and black powder coating, this pipe not only looks great but is structurally stronger and won't crack after long-term exposure to heating/cooling cycles. This is perfect for anyone who is looking for more power, whether the car is stock, or highly modified. Additionally, all OE ports are retained and all clips and seals are included for installation! There's no longer a need to reuse your stock clip and o-ring. As an added bonus, a water/meth bung has been added to the design for those who are looking to get the highest levels of performance out of their BMW's engine! Features: OEM Fitment Increased diameter and airflow Increase throttle response and decreases turbo lag. Powder-coated black aluminum piping. CNC Machined Throttle Body Flange Includes one 1/8' NPT bung for meth/water injection. Includes everything necessary to upgrade from factory chargepipe. 3-Ply Reinforced Silicone Couplers 1-Year Limited Warranty against defects or workmanship

Show More Show Less

ECS Tuning Turbo Outlet Boost Pipe - BMW F22/23 F3X N55 3.0L ...

T#:6924317

Part#: 090698ECS09

In Stock

Sale - Save 15% $ 251.99

This product was last offered at the strikethrough price on
06-14-2026

$ 214.19 USD

Add to Wish List

Qty

Sale - Save 15%

$ 251.99

This product was last offered at the strikethrough price on
06-14-2026

$ 214.19 USD

Add to Wish List

If you are looking to improve your intake system, a major component to consider is your boost pipe. The stock plastic BMW boost pipe is flimsy and prone to cracking. This results in unreliability and restricted power. ECS Tuning's new powder-coated Aluminum Boost Pipe is designed to replace your stock pipe, offering increased strength, reliability, and improved airflow! Using aluminum construction and black powder coating, this pipe not only looks great but is structurally stronger and won't crack after long-term exposure to heating/cooling cycles. This is perfect for anyone who is looking for more power, whether the car is stock, or highly modified. Additionally, all OE style connections are retained and all clips and seals are included for installation! There's no longer a need to reuse your stock clip and o-ring. Features: OEM Fitment Smooth bends for unobstructed flow Powder-coated black aluminum piping. CNC Machined Turbo & Intercooler Flanges Includes everything necessary to upgrade from the factory boost pipe. 3-Ply Reinforced Silicone Coupler 1-Year Limited Warranty against defects or workmanship

Show More Show Less

ECS Tuning Intake Pipe Upgrade - BMW F22/23 F3X B58 3.0L

T#:6924273

Part#: 090760ECS09

Special Order: No Guaranteed ETA

Sale - Save 10% $ 251.99

This product was last offered at the strikethrough price on
06-14-2026

$ 226.79 USD

Add to Wish List

Qty

Sale - Save 10%

$ 251.99

This product was last offered at the strikethrough price on
06-14-2026

$ 226.79 USD

Add to Wish List

BMW's OE intake pipe (13718601682) leaves a lot to be desired thanks to its plastic construction and tight bends. This leads to potential cracking from heat cycle fatigue as well as limited, turbulent airflow. Improve the airflow to your BMW's turbos with this ECS Tuning Intake Pipe Upgrade! Featuring full aluminum construction, black powder coating, smooth bends, and all the necessary installation components, this intake pipe is an easy plug-and-play addition to your BMW! Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 3-Ply Silicon Couplers

Show More Show Less

ECS Tuning Turbo Outlet Boost Pipe - BMW F22/23 F3X N20 2.0L ...

T#:6924248

Part#: 090696ECS09

Special Order: No Guaranteed ETA

Sale - Save 15% $ 251.99

This product was last offered at the strikethrough price on
06-14-2026

$ 214.19 USD

Add to Wish List

Qty

Sale - Save 15%

$ 251.99

This product was last offered at the strikethrough price on
06-14-2026

$ 214.19 USD

Add to Wish List

If you are looking to improve your intake system, a major component to consider is your boost pipe. The stock plastic BMW boost pipe is flimsy and prone to cracking. This results in unreliability and restricted power. ECS Tuning's new powder-coated Aluminum Boost Pipe is designed to replace your stock pipe, offering increased strength, reliability, and improved airflow! Using aluminum construction and black powder coating, this pipe not only looks great but is structurally stronger and won't crack after long-term exposure to heating/cooling cycles. This is perfect for anyone who is looking for more power, whether the car is stock, or highly modified. Additionally, all OE style connections are retained and all clips and seals are included for installation! There's no longer a need to reuse your stock clip and o-ring. Features: OEM Fitment Smooth bends for unobstructed flow Powder-coated black aluminum piping. CNC Machined Turbo & Intercooler Flanges Includes everything necessary to upgrade from the factory boost pipe. 3-Ply Reinforced Silicone Coupler 1-Year Limited Warranty against defects or workmanship

Show More Show Less

ECS Tuning Charge Pipe Kit - BMW F22/23 F3X G30 G32 G11 G01 G02 B48/B...

Fits the Gen 1 B48/B46 engine only! Not compatible with the B48TU/B46TU engine

T#:6924302

Part#: 090720ECS09

Special Order: No Guaranteed ETA

Sale - Save 10% $ 383.99

This product was last offered at the strikethrough price on
06-14-2026

$ 345.59 USD

Add to Wish List

Qty

Sale - Save 10%

$ 383.99

This product was last offered at the strikethrough price on
06-14-2026

$ 345.59 USD

Add to Wish List

If you are looking to improve your intake system, a major component to consider is your charge pipe. The stock plastic BMW charge pipe is flimsy, prone to cracking, and restricts airflow at high RPMs. This results in unreliability and restricted power. ECS Tuning's new line of powder-coated Aluminum Charge Pipes are designed to replace your stock pipes, offering increased strength, reliability, and higher airflow! Using aluminum construction and black powder coating, this pipe not only looks great but is structurally stronger and won't crack after long-term exposure to heating/cooling cycles. This is perfect for anyone who is looking for more power, whether the car is stock, or highly modified. Additionally, all OE ports are retained and all clips and seals are included for installation! There's no longer a need to reuse your stock clip and o-ring. As an added bonus, a water/meth bung has been added to the design for those who are looking to get the highest levels of performance out of their BMW's engine! Features: OEM Fitment Increased diameter and airflow Increase throttle response and decreases turbo lag Powder-coated black aluminum piping CNC Machined Throttle Body Flange Includes one 1/8' NPT bung for meth/water injection Includes everything necessary to upgrade from factory chargepipe 3-Ply Reinforced Silicone Couplers 1-Year Limited Warranty against defects or workmanship

Show More Show Less

ECS Tuning Charge Pipe & Boost Pipe Kit - F3X N20 2.0L

T#:6924304

Part#: 090697ECS09

Special Order: No Guaranteed ETA

Sale - Save 5% $ 509.99

This product was last offered at the strikethrough price on
06-14-2026

$ 484.49 USD

Add to Wish List

Qty

Sale - Save 5%

$ 509.99

This product was last offered at the strikethrough price on
06-14-2026

$ 484.49 USD

Add to Wish List

If you are looking to improve your intake system, a major component to consider is your charge pipe and boost pipe. The stock plastic BMW charge pipe is flimsy, prone to cracking, and restricts airflow at high RPMs. This results in unreliability and restricted power. ECS Tuning's new line of powder-coated Aluminum Charge Pipes are designed to replace your stock pipes, offering increased strength, reliability, and higher airflow! Using aluminum construction and black powder coating, this pipe not only looks great but is structurally stronger and won't crack after long-term exposure to heating/cooling cycles. This is perfect for anyone who is looking for more power, whether the car is stock, or highly modified. Additionally, all OE ports are retained and all clips and seals are included for installation! There's no longer a need to reuse your stock clip and o-ring. As an added bonus, a water/meth bung has been added to the design for those who are looking to get the highest levels of performance out of their BMW's engine! Features: OEM Fitment Increased diameter and airflow Increase throttle response and decreases turbo lag. Powder-coated black aluminum piping. CNC Machined Throttle Body Flange Includes one 1/8' NPT bung for meth/water injection. Includes everything necessary to upgrade from factory chargepipe. 3-Ply Reinforced Silicone Couplers 1-Year Limited Warranty against defects or workmanship

Show More Show Less

Boost Pipe C-Clip

T#:21275548

Part#: SG71382-C2

Special Order: No Guaranteed ETA

Sale - Save 25% $ 43.99

This product was last offered at the strikethrough price on
06-14-2026

$ 32.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 43.99

This product was last offered at the strikethrough price on
06-14-2026

$ 32.99 USD

Add to Wish List

Are you missing your charge pipe O-Ring or C-Clip, or have they been damaged during installation or removal of your charge pipe? This replacement set is the perfect choice for OE-style fitment and function!

Show More Show Less

ECS Tuning Intake Pipe Upgrade - BMW F22/23 F3X N55 3.0L

T#:6924239

Part#: 090732ECS09

Special Order: No Guaranteed ETA

Sale - Save 5% $ 239.99

This product was last offered at the strikethrough price on
06-14-2026

$ 227.99 USD

Add to Wish List

Qty

Sale - Save 5%

$ 239.99

This product was last offered at the strikethrough price on
06-14-2026

$ 227.99 USD

Add to Wish List

BMW's OE intake pipe (13717602651) leaves a lot to be desired thanks to its plastic construction and tight bends. This leads to potential cracking from heat cycle fatigue as well as limited, turbulent airflow. Improve the airflow to your BMW's turbos with this ECS Tuning Intake Pipe Upgrade! Featuring full aluminum construction, black powder coating, smooth bends, and all the necessary installation components, this intake pipe is an easy plug-and-play addition to your BMW! Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume

Show More Show Less

Project Cars

SELECT YOUR BMW

Charge Pipes & Turbo Inlets for BMW 4 Series F36 (2015+)

Upgraded N55 Silicone/Aluminum Turbo Inlet Hose Kit - F Chassis N55 ...

Turner Charge Pipe Upgrade Kit - F22/23 F3X F87 N55

Turner Turbo Boost Pipe Upgrade - F22/23 F3X F87 N55

Turner Complete Charge Pipe Upgrade Kit - F22/23 F3X F87 N55 ...

Turner Motorsport Upgraded Silicone Lower Air Intake Pipe (Turbo Inle...

Turner Hot Side & Cold Side Charge Pipes - N20

Turner Aluminum Charge Pipe - F3x B58

ECS Tuning Charge Pipe C-Clip & O-Ring - N54/N55 3.0L

Turner Motorsport Upgraded Silicone Upper Air Intake Pipe (Turbo Inle...

Turner Upgraded Aluminum Lower Turbo Inlet Pipe - F3x B58

ECS Tuning N55 Performance Charge Pipe - BMW F22/23 F87 F3X N55 3.0L ...

Turner MotorSport Hot Side Charge Pipe - N20

F22/23 F3x Turner Motorsport Charge Pipes & Intercooler Kit

Turner Cold Side Charge Pipe - N20

Turner Motorsport Upgraded Silicone Air Intake Pipes (Turbo Inlets) -...

ECS Tuning Charge Pipe & Boost Pipe Kit - BMW F22/23 F3X G01/02 G30 G...

ECS Tuning Turbo Intake Pipe Upgrade - BMW F2X/F3X B48/B46 2.0L ...

Active Autowerke - Upgraded Air Charge Pipe - N55 F30, F32, F34, F87 ...

ECS Tuning Charge Pipe & Boost Pipe Kit - F2X/F3X N55 3.0L

ECS Tuning Intake Pipe Upgrade - BMW F22/23 F3X N20 2.0L

ECS Tuning Charge Pipe & Intake Pipe Kit - BMW F22/23 F3X B48/B46 2.0...

ECS Tuning Turbo Outlet Boost Pipe - BMW F22/23 F3X N55 3.0L ...

ECS Tuning Intake Pipe Upgrade - BMW F22/23 F3X B58 3.0L

ECS Tuning Turbo Outlet Boost Pipe - BMW F22/23 F3X N20 2.0L ...

ECS Tuning Charge Pipe Kit - BMW F22/23 F3X G30 G32 G11 G01 G02 B48/B...

ECS Tuning Charge Pipe & Boost Pipe Kit - F3X N20 2.0L

Boost Pipe C-Clip

ECS Tuning Intake Pipe Upgrade - BMW F22/23 F3X N55 3.0L

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results