Still have the factory exhaust fitted to your B58? You don't know what your missing. Free up lost performance with a new full cat-back exhaust complete with factory valve control!

The B58 engine earned the badge "Worlds 10 Best Engines" four times as of 2023. In 2016 the single turbo straight six found its way to the leaderboards for the first time and followed up in 2017, 2019, and 2020 staying on the charts as one of the best engines in the WORLD.

Our new cat-back exhaust is designed to take out restrictions, maximize flow and give your B58 a signature exhaust note that will excite you on every drive. From the factory your vehicle comes equipped with a combination of three mufflers and resonators that do a great job of silencing the exhaust and restricting flow. There is a center muffler(one restriction), rear section resonator(two restrictions) and a bulky muffler(three restrictions!). With all of those stop gates how do you expect to get the maximum performance out of your vehicle, you simply cannot do so. Lucky for our in-house engineers you no longer have to deal with the quiet and limiting factory exhaust.

To create a cat-back exhaust for this incredible engine the changes happen right after the downpipe. We replaced the factory oval pipe with our full 3.0" T304 stainless steel piping. The true 3.0" exhaust makes its way through the center and rear of the car without the center muffler or resonator to keep flow to a maximum! With smooth mandrel bent transitions our exhaust passes perfectly under the rear subframe for a factory equivalent fit. Positioned in the rear of the car is our signature B58 muffler with beautiful inlet and outlet piping that creates the perfect exhaust tuning. Featuring relief cut slip joints and fabricated sheet metal brackets the exhaust can be fully adjusted and mounted seamlessly in the factory locations. Dual 4.0" exhaust tips are optioned to fill out the open space in the rear diffuser and complete the rear profile of the vehicle.

Part Design:

Turner In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment.
T304 Stainless Material in a natural finish - 1.25mm wall thickness, back purged and TIG-welded throughout
Full 3.0" Stainless Steel Mandrel Bent Tubing
T304 Stainless Steel 12mm barbed exhaust hangers Tig-Welded in OE locations for precise fitment.​
Strategically placed slip joints provide the most adjustability to obtain perfect fitment
Features and Benefits:

Street/Motorsport inspiration
Controlled by factory valves
Reduction in back pressure for increased throttle response, TQ and HP
Dual exit with fitted exhaust tips
Kit Contents:

3.0" front exhaust section (direct fitment to the factory downpipe)
Full 3.0" light weight free-flowing middle muffler sections for better sound, performance and weight savings.
Valved Rear muffler
Clamps and Hardware for an OEM+ install
Optional Turner Exhaust tips - 3.0" Inlet, 4.0" Outlet
Product Development:

Our F Chassis B58 Valved Catback was designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing.

B58 Engine Design:

BMW's first mass produced turbo charged engine, the N54 took the world by storm opening a whole can of worms in the car industry and aftermarket community. A new era of motors were created with the new B58 roughly 9 years after the N54 had been tested and pushed to its limits along with its single turbo companion, the N55. In 2015 the modular engine family was created and the B58 was released into the wild to set a new standard in performance and reliability. Turning back to their roots the B58 engine features a closed-deck engine design similar to the N54 that allows a massive increased in boost pressure capacity and heightened compression ratio. Thought the B58 is similar in weight and size to its predecessor, the new modular engine makes considerably more power right off the rip. With the new block design heat management has been upgraded to reduce the affects of heat cycling to slow the rate of cooling and prevent engine components from failing due to rapid cooling. Just like the N55 the B58 comes fitted with dual vanos, valvetronic and a single twin scroll turbo. Just 8 years experience of this motor we can all agree that the B58 looks like it could be the future of motors to come. This tunable engine has been tested up to 1000hp with the stock block and hosts a platform for the community to break into a whole new class of attainable "supercar killers".

Presenting our Turner Motorsport Performance Cat-Back Exhaust, tailor-made for your 330 or 430. Immerse yourself in an enhanced driving adventure as this meticulously engineered exhaust takes your B46/B48-equipped car to exhilarating new heights. With an unwavering commitment to performance and quality, the Turner exhaust is crafted to unlock the full potential of your F chassis.

Experience a symphony of performance and sound, coupled with a visual upgrade through the quad exit exhaust tips that amplify the motorsport essence of your vehicle. Elevate your driving encounters with the Turner Motorsport cat-back exhaust - unleash the power, reveal the glorious sound, and capture attention wherever you go.

Incorporating their distinctive design principles, this exhaust produces a commanding, deep tone, revealing the bold personality of the revolutionary line of 4-cylinder turbo engines. Leveraging the factory valve control, the Turner cat-back ensures an exciting sound during acceleration, seamlessly blending the high-performance sound with daily driving convenience. Crafted from 1.25mm wall T304 stainless steel, Turner's exhaust boasts superior durability, corrosion resistance, and aesthetic appeal.

Designed with the customer in mind, the installation is a breeze, featuring a straightforward bolt-on process using factory slip joints and mounting locations. Your exhaust system includes all the necessary clamps and hardware for a hassle-free installation. Upgrade your 330/430 with the Turner Motorsport cat-back and let every drive become a statement of power and style.

Upgrading the sound:

Our exhaust allows you to turn up the volume and let the B46/B48 boast its smooth and hearty exhaust tone. Let's be honest, what's the point of owning a B48 if you're not going to upgrade the exhaust? Our signature muffler design allows you to transfer the exhaust valve from your factory system directly onto your new Turner system. The Turner exhaust signature muffler design allows for two flow paths that change both tone and volume. With the vehicle in eco or comfort mode, the valves remain closed, with the closed valves the exhaust system allows the gasses to flow through the muffler toning down the volume and giving a more refined exhaust note. While in driving modes sport or sport+ the valve opens and the flow path changes to a "straight flow path" essentially turning into a straight-piped exhaust for the least amount of restriction and the most amount of B48 sound!

How the cat-back is designed:

To create a cat-back exhaust for this incredible vehicle the upgrade happens right at the downpipe. Turner replaced the factory components with oversized 3.0" T304 stainless steel piping. The true 3.0" exhaust makes its way through the center and rear of the car without the center muffler or resonator to keep the flow to a maximum! With smooth mandrel bent transitions, this exhaust passes perfectly under the rear subframe for a factory equivalent fit. Positioned in the rear of the car is Turner's signature B46/B48 muffler with a beautiful inlet and outlet piping that creates the perfect exhaust tuning. Featuring relief cut slip joints and fabricated sheet metal brackets the exhaust can be fully adjusted and mounted seamlessly in the factory locations. Dual 3.0" exhaust tips are optioned to fill out the open space in the rear diffuser and complete the rear profile of the vehicle.

Features and Benefits:

Street/Motorsport inspiration
Controlled by factory valves
Pronounced dual 3.0" Exhaust tip options
17 lb weight savings (Factory - 55lbs, Turner 38lbs)
Kit Contents:

3.0" front exhaust section
Full 3.0" lightweight free-flowing midsection for better sound, performance, and weight savings.
Valved rear muffler
Valve extension harness
Clamps and hardware for an OEM+ install
Optional dual 3.0" exhaust tips
Optional OBD plug-in
Part Design:

Turner In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment.
T304 Stainless Material in a natural finish - 1.25mm wall thickness, back purged and TIG-welded throughout
Full 3.0" Stainless Steel Mandrel Bent Tubing
T304 Stainless Steel 12mm barbed exhaust hangers Tig-Welded in OE locations for precise fitment.​
Strategically placed slip joints provide the most adjustability to obtain perfect fitment
Optional OBD Plug-In:

The factory-valved muffler is not only controlled by different driving modes like comfort, sport, and sport plus but the RPM also plays into whether the valves are opened or closed. If you are looking for a solution to define whether your exhaust valve is fully opened or closed then you should look into adding an OBD plug-in that features Bluetooth valve control from your phone. During testing, the best way to choose whether your valve is open or closed for your sound preference is through an OBD-linked application on your phone. Included in this kit are optional OBD extensions to not only gain diagnostic function but also gain the ability to influence widgets on your vehicle such as valve position on your valved muffler.

High flow exhaust system directly from aFe, one of the top after market performance manufacturers. This new MACH Force XP exhaust system is for the 2016+ BMW 340i F30 with the new N58 3.0L turbo engine. In recent testing this system produced 14 horsepower and 13 lbs. x ft. of torque. This exhaust system is constructed from 3.0” mandrel bent stainless steel and is hand TIG-welded. The system uses a high flow transverse muffler with 3" diameter tubing which improves performance across the power band while maintaining a great tone. To finish off this exhaust are dual double wall resonated angle cut polished 304 stainless steel tips. The factory actuator drive is retained with the aFe exhaust so that a check engine light does not occur. This exhaust uses all factory hanger locations for a hassle free installation. No modifications necessary.

Simple Installation:
All systems use factory mounting locations providing stability and hassle-free installation.

Leak-Free Seal:
High quality band clamps are used for a complete 360 degree sealing surface.

Aggressive Sound:
A free-flowing muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque.

Product Features:

• +14 HP and +13 lbs. x ft. Torque max gains
• Constructed from 100% hand TIG-welded, 3" to 2-1/2" mandrel bent, brushed finished 304 stainless steel tubing
• Includes a factory style exhaust valve
• Utilizes a unique high flow, transverse muffler with a high-temp powder-coated black finish
• Includes dual 4" diameter, polished 304 stainless steel tips
• Factory style V-band flange for a secure leak-free seal
• Uses all factory hanger locations for a hassle-free installation

Fits the Following BMW's:
2016+ F30 BMW 340i B58

High flow exhaust system directly from aFe, one of the top after market performance manufacturers. This new MACH Force XP exhaust system is for the 2016+ BMW 340i F30 with the new N58 3.0L turbo engine. In recent testing this system produced 14 horsepower and 13 lbs. x ft. of torque. This exhaust system is constructed from 3.0” mandrel bent stainless steel and is hand TIG-welded. The system uses a high flow transverse muffler with 3" diameter tubing which improves performance across the power band while maintaining a great tone. To finish off this exhaust are dual double wall resonated angle cut gloss black 304 stainless steel tips. The factory actuator drive is retained with the aFe exhaust so that a check engine light does not occur. This exhaust uses all factory hanger locations for a hassle free installation. No modifications necessary.

Simple Installation:
All systems use factory mounting locations providing stability and hassle-free installation.

Leak-Free Seal:
High quality band clamps are used for a complete 360 degree sealing surface.

Aggressive Sound:
A free-flowing muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque.

Product Features:

• +14 HP and +13 lbs. x ft. Torque max gains
• Constructed from 100% hand TIG-welded, 3" to 2-1/2" mandrel bent, brushed finished 304 stainless steel tubing
• Includes a factory style exhaust valve
• Utilizes a unique high flow, transverse muffler with a high-temp powder-coated black finish
• Includes dual 4" diameter, gloss black 304 stainless steel tips
• Factory style V-band flange for a secure leak-free seal
• Uses all factory hanger locations for a hassle-free installation

Fits the Following BMW's:
2016+ F30 BMW 340i B58

To harvest the full potential of the BMW engine, Armytrix utilizes quality T304 stainless steel, forged with the most advanced technologies and by the highest standard, to build their valvetronic exhaust. Meticulously engineered, the system handles an increased volume with ruthless efficiency. The refinement and amplification of power and sound alter the entire identity of the vehicle. Upgrades to HP and torque provide more freedom than ever and the auditory sensation throughout the rev range will have your adrenaline pumping to the beat of the car.

The ARMYTRIX exclusive OBDII dongle system reduces the installation time by 50%! With clear displays and user-friendly controls, navigate through our smartphone app to attain an insightful look into the vehicle's real-time operational status and complete control over the valve settings. They have tailored each exhaust for carrying the maximum payload to be delivered to thunderous effect. Their streamlined system is lighter, ridded of the OE deadweight and offers an unrestrictive flow; the improved efficiency plays a vital role in the dramatic improvements in both horsepower and torque.

ARMYTRIX Corp. has established itself as a manufacturer of world class titanium and stainless valvetronic exhaust systems for high-end performance cars. The ARMYTRIX R&D team consists of highly trained and experienced German and Japanese factory engineers and supercar tuning experts, each having decades of knowledge and experience within the race track and automotive performance industries.

Includes:

Front Pipe
Mid Pipe
Valvetronic Mufflers
Tail Pipe
Remote Control Module
Features:

Stainless Steel
Dual Blue Coated Tips
3 Mode Valve System to control exhaust sound
Power ( HP): 16
Torque ( Nm): 22
Weight Saving (-Kg): 6.4
View Install Instructions Here
BMF34 Fitment:

BMW 335i F30 | F31 12-15
BMW 435i F32 14-15
BMW 435i Gran Coupe F36 15-16

B58 Performance Valved Catback Exhaust - F30, F32, F33, F36:

Still have the factory exhaust fitted to your B58? You don't know what your missing. Free up lost performance with a new full cat-back exhaust complete with factory valve control!

The B58 engine earned the badge "Worlds 10 Best Engines" four times as of 2023. In 2016 the single turbo straight six found its way to the leaderboards for the first time and followed up in 2017, 2019, and 2020 staying on the charts as one of the best engines in the WORLD.

Our new cat-back exhaust is designed to take out restrictions, maximize flow and give your B58 a signature exhaust note that will excite you on every drive. From the factory your vehicle comes equipped with a combination of three mufflers and resonators that do a great job of silencing the exhaust and restricting flow. There is a center muffler(one restriction), rear section resonator(two restrictions) and a bulky muffler(three restrictions!). With all of those stop gates how do you expect to get the maximum performance out of your vehicle, you simply cannot do so. Lucky for our in-house engineers you no longer have to deal with the quiet and limiting factory exhaust.

To create a cat-back exhaust for this incredible engine the changes happen right after the downpipe. We replaced the factory oval pipe with our full 3.0" T304 stainless steel piping. The true 3.0" exhaust makes its way through the center and rear of the car without the center muffler or resonator to keep flow to a maximum! With smooth mandrel bent transitions our exhaust passes perfectly under the rear subframe for a factory equivalent fit. Positioned in the rear of the car is our signature B58 muffler with beautiful inlet and outlet piping that creates the perfect exhaust tuning. Featuring relief cut slip joints and fabricated sheet metal brackets the exhaust can be fully adjusted and mounted seamlessly in the factory locations. Dual 4.0" exhaust tips are optioned to fill out the open space in the rear diffuser and complete the rear profile of the vehicle.

Sound clips! Check out our Product Highlight on the ECS Tuning YouTube channel!

Part Design:

Turner In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment. T304 Stainless Material in a natural finish - 1.25mm wall thickness, back purged and TIG-welded throughout Full 3.0" Stainless Steel Mandrel Bent Tubing T304 Stainless Steel 12mm barbed exhaust hangers Tig-Welded in OE locations for precise fitment.​ Strategically placed slip joints provide the most adjustability to obtain perfect fitment Features and Benefits:

Street/Motorsport inspiration Controlled by factory valves Compatible with factory and aftermarket downpipes (80mm) Reduction in back pressure for increased throttle response, TQ and HP Dual exit with fitted exhaust tips Kit Contents:

3.0" front exhaust section (direct fitment to the factory downpipe) Full 3.0" light weight free-flowing middle muffler sections for better sound, performance and weight savings. Valved Rear muffler Valve extension harness Clamps and Hardware for an OEM+ install Turner Exhaust tips - 3.0" Inlet, 4.0" Outlet Product Development:

Our F Chassis B58 Valved Cat-back was designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing.

B58 Engine Design:

BMW's first mass produced turbo charged engine, the N54 took the world by storm opening a whole can of worms in the car industry and aftermarket community. A new era of motors were created with the new B58 roughly 9 years after the N54 had been tested and pushed to its limits along with its single turbo companion, the N55. In 2015 the modular engine family was created and the B58 was released into the wild to set a new standard in performance and reliability. Turning back to their roots the B58 engine features a closed-deck engine design similar to the N54 that allows a massive increased in boost pressure capacity and heightened compression ratio. Thought the B58 is similar in weight and size to its predecessor, the new modular engine makes considerably more power right off the rip. With the new block design heat management has been upgraded to reduce the affects of heat cycling to slow the rate of cooling and prevent engine components from failing due to rapid cooling. Just like the N55 the B58 comes fitted with dual vanos, valvetronic and a single twin scroll turbo. Just 8 years experience of this motor we can all agree that the B58 looks like it could be the future of motors to come. This tunable engine has been tested up to 1000hp with the stock block and hosts a platform for the community to break into a whole new class of attainable "supercar killers".

Click HERE for Installation Instructions:

Turner Aluminum Charge Pipe - F3x B58:

- Click HERE for Installation Instructions -

The factory B58 charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power.

Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. You can also safely turn up the boost on your B58 once this kit is installed, and not worry about the problematic factory piece.

Whether you have a stock car and are looking for improved throttle response and peace of mind, or a high boost monster in search of reliability in your big horsepower build, this charge pipe is the solution you’ve been looking for!

Design Features and Benefits:

The upper pipe is constructed from 6063 aluminum for increased durability over the factory plastic charge pipe. Can withstand higher boost pressures while offering OE-like fitment.

Billet CNC throttle body flange for OEM fitment.

Black powder coated for exceptional durability and corrosion resistance.

Lower pipe is constructed of 4-ply reinforced silicone hose and a 6061-T6 black anodized aluminum coupler to retain factory fitment to the turbo.

Silicone provides a smooth transition from turbo outlet to the upper aluminum pipe. The silicone also provides good wear resistance wear the charge pipe is in close contact with the turbo inlet and coolant hoses.

Ensure a secure connection between the downpipe and the turbo in your BMW with the Genuine V-Band Exhaust Clamp 11658585233. This high-quality clamp provides a reliable mount, ensuring optimal performance and exhaust system integrity.

• Genuine V-Band Exhaust Clamp for BMW
• Securely mounts downpipe to the turbo
• Ensures a reliable and durable connection
• Maintains optimal exhaust system performance

Ensure a perfect seal for your BMW's OEM, VRSF, or aftermarket high flow downpipes with our high-quality Grade 12 installation hardware and gaskets. Each set includes 4 bolts, nuts, washers, and 2 stainless steel gaskets suitable for N54/N55 engines. Designed for years and models specified below, these components guarantee optimal performance and compatibility. Additionally, turbo to downpipe gaskets and clamps are available separately, along with midpipe gaskets for the S55 engine.

• High-quality Grade 12 installation hardware and gaskets
• Ensures a perfect seal for OEM, VRSF, or aftermarket downpipes
• Suitable for N54/N55 engines
• Compatible with specified BMW years and models
• Turbo to downpipe gaskets and clamps available separately

Enhance your BMW's exhaust system with the all-new Magnaflow Universal Muffler, available at an exceptionally affordable price point. Say goodbye to noisy and inefficient mufflers with this high-performance solution.

The Race Series muffler is meticulously designed for uncompromising performance, delivering an aggressive racecar-inspired sound. Its genuine straight-through design ensures the utmost high RPM power, while the 2.5" or 3" perforated core effectively eliminates backpressure, optimizing exhaust flow.

This muffler stands as the ideal choice for dedicated racers, turbocharged engines, nitrous oxide fuel systems, or vehicles equipped with wild cam applications. It boasts a 2.25" inlet, a 24" overall length, and a 4" diameter round, angle-cut tip.

Kindly note that this muffler is of universal fit for rear exhaust and may necessitate welding or fabrication for installation, as it is not a direct bolt-on component for any specific vehicle.