BMW F80 M3 S55 3.0L

N-Series Ultimate Performance Ignition Coil - Red - Set Of Six ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:23714967

Part#: NSERIESIGNCOILKT

In Stock

$ 205.99 USD

Add to Wish List

Qty

$ 205.99 USD

Add to Wish List

Upgrade your BMW's engine performance with the Dinan Performance Ignition Coil Service Kit. These high-quality ignition coils are crafted to enhance ignition power, ensuring optimal engine performance and efficiency. Engineered for durability and reliability, these coils provide improved throttle response, smoother idle, and enhanced fuel efficiency. Benefit from the Dinan Performance Ignition Coil Service Kit, designed to unleash the true potential of your BMW's engine.

Show More Show Less

Valve Cover Replacement Kit - F8X S55

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:30197943

Part#: 11127846359KT3

In Stock

Sale - Save 21% $ 509.99

This product was last offered at the strikethrough price on
04-17-2026

$ 404.08 USD

Add to Wish List

Qty

Sale - Save 21%

$ 509.99

This product was last offered at the strikethrough price on
04-17-2026

$ 404.08 USD

Add to Wish List

Maintaining proper oil levels in your engine is crucial for peak performance. Undetected leaks can cause your oil to drop to dangerously low levels between oil changes, leading to severe engine damage.

One common culprit for oil leaks is the valve cover. Over time, exposure to extreme temperature fluctuations can wear down the gaskets, causing them to fail. Prevent oil leaks and protect your engine by replacing these vital components.

Comprehensive Kit Includes:

Valve Cover Assembly Valve Cover Gaskets Gasket Flange CCV Hose Hardware Replace your old gaskets with our high-quality kit to keep your engine running smoothly and efficiently.

Show More Show Less

Liqui Moly Oil Change Kit

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:15710796

Part#: 111375351063-KT

In Stock

$ 97.60 USD

Add to Wish List

Qty

$ 97.60 USD

Add to Wish List

To keep your Ultimate Driving Machine performing flawlessly, BMW recommends following the condition-based service indicator, meaning performing oil changes when the car says it needs it. For extra peace of mind, it doesn't hurt to increase your service intervals to a more commonly accepted duration, such as every 5,000-10,000 miles. Doing all of the necessary inspections will keep your vehicle running much longer and cleaner.

Show More Show Less

Liqui Moly Molygen Oil Change Kit

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:15710822

Part#: 111375351064-KT

In Stock

Sale - Save 15% $ 112.99

This product was last offered at the strikethrough price on
05-15-2026

$ 95.67 USD

Add to Wish List

Qty

Sale - Save 15%

$ 112.99

This product was last offered at the strikethrough price on
05-15-2026

$ 95.67 USD

Add to Wish List

To keep your Ultimate Driving Machine performing flawlessly, BMW recommends following the condition based service indicator, meaning performing oil changes when the car says it needs it. For extra peace of mind, it doesn't hurt to increase your service intervals to a more commonly accepted duration, such as every 5,000-10,000 miles. Doing all of the necessary inspections will keep your vehicle running much longer and cleaner.

Show More Show Less

Billet Oil Filter Cap

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21045489

Part#: BMS-OFC

In Stock

Starting at $ 89.00 USD

Add to Wish List

Starting at $ 89.00 USD

Add to Wish List

The Burger Motorsports V2 billet aluminum oil filter cover is a metal upgrade that directly replaces your weak OE plastic cap for greater protection, better cooling, ease of removal/install, and looks great under the hood. The built-in 21mm hex and a 3/8" drive socket wrench fitting that does not require a special removal/install tool like the factory cap. Uses the OE oil filter, filter housing o-ring, and filter cage. Anodized for protection. This quality part is a must for any serious BMW owner. Replaces OEM part number 11427525334 - BMW Oil filter cover. Features and Benefits Solid aluminum design is much stronger than brittle plastic 21mm hex head + 3/8" drive socket wrench fitting Integrated heat sinks for better oil cooling Special tools are not required for removal/install like the factory cap Strong design won't fail under pressure Reuses OE filter cage and o-ring Anodized for protection Looks great under the hood Made in the USA

Show More Show Less

BMW N54 N55 S55 Mosselman Thermostat Installation Kit

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:4799665

Part#: THERMINSTALLKT

In Stock

Sale - Save 6% $ 22.99

This product was last offered at the strikethrough price on
06-15-2026

$ 21.64 USD

Add to Wish List

Qty

Sale - Save 6%

$ 22.99

This product was last offered at the strikethrough price on
06-15-2026

$ 21.64 USD

Add to Wish List

BMW N54 N55 S55 Mosselman Thermostat Installation Kit is designed to ensure a seamless installation of the Mosselman thermostat on BMW engines. This comprehensive kit from Turner Motorsport includes all necessary gaskets and components, guaranteeing a reliable and precise installation for optimal engine performance.

Complete Kit: Includes all essential gaskets and components required for a hassle-free thermostat installation.
Optimal Performance: Ensures proper installation of the Mosselman thermostat, leading to improved engine cooling efficiency and performance.
High-Quality Components: Gaskets and parts are manufactured to meet high standards of durability and reliability.
Precision Fit: Engineered to match OEM specifications, providing a perfect fit and reliable performance.
Ease of Installation: All necessary parts are included, simplifying the installation process and reducing the need for additional purchases.

Upgrade your BMW's cooling system with the Mosselman Thermostat Installation Kit from Turner Motorsport, ensuring a top-quality, reliable setup for your engine.

Show More Show Less

Bremi Ignition Coil

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:340576

Part#: 12131712219

In Stock at Vendor

$ 28.78

This product was last offered at the strikethrough price on
04-09-2026

$ 25.43 USD

Add to Wish List

Qty

$ 25.43 USD

Add to Wish List

Get your engine back to peak performance with a new ignition coil.

Port Injector Plugs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:27171925

Part#: UNI-BMS-PIPLUGS

In Stock

$ 60.00 USD

Add to Wish List

Qty

$ 60.00 USD

Add to Wish List

These dummy injectors fit in place of port injection fuel injectors to block the holes. Allows use to aluminum manifolds with port injection bungs without having to purchase fuel injectors. Plugs are EV14 injectors and measure 38mm or 1.5" from o-ring to o-ring.

Show More Show Less

N54/N55 Low Temp Oil Thermostat Kit - 70c

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:52621839

Part#: 008731KT1

In Stock

Sale - Save 23% $ 74.98

This product was last offered at the strikethrough price on
05-03-2026

$ 57.74 USD

Add to Wish List

Qty

Sale - Save 23%

$ 74.98

This product was last offered at the strikethrough price on
05-03-2026

$ 57.74 USD

Add to Wish List

Upgrade your stock oil cooler thermostat for improved performance. Swap your factory 110-degree Celsius thermostat for a new 70-degree Celsius version for faster oil flow and extended temperature control. With oil temperatures reaching 230 degrees Fahrenheit by the time your factory thermostat opens, initiating oil flow at lower temperatures proves more effective than attempting to cool down already elevated temperatures.

Utilizing a factory-style thermostat, this upgrade can be used in all weather conditions and allows your engine to warm up properly, unlike thermostat bypass kits.

Kit contents:

Lower temperature thermostat - 70c (158F) vs Factory 110c (230F)
Low temp thermostat spring

Show More Show Less

BMW / MINI Jack Pad Adapters - Blue - Set Of 4

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:31522930

Part#: BMWJACKPADBLUE4

In Stock

$ 65.00 USD

Add to Wish List

Qty

$ 65.00 USD

Add to Wish List

Performance Brake Fluid Flush Kit - Level 3

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:15677547

Part#: 007237SCH01A-KT

In Stock

Sale - Save 9% $ 157.33

This product was last offered at the strikethrough price on
05-03-2026

$ 142.76 USD

Add to Wish List

Qty

Sale - Save 9%

$ 157.33

This product was last offered at the strikethrough price on
05-03-2026

$ 142.76 USD

Add to Wish List

Braking systems aren't indestructible, they require proper maintenance and care to keep contaminants and moisture free from the system. A full brake fluid flush is recommended to be performed at every 2 years or 30,000 miles, whichever occurs first (Intervals may vary for vehicles used on the track, check fluid specifications for more details). A proper flush removes debris left in the system from failed seals or deposits and ensures that the system is moisture free, to help prevent future rust or clogging issues. This kit includes everything you need to perform a proper brake fluid flush and refill using a fluid that features a greater boiling point for performance based applications. Includes: Schwaben European Pressure Bleeder Schwaben Catch Bottle Set Ate TYP 200 DOT 4 Brake Fluid - 1 Liter Schwaben Brake Bleeder Wrench **A typical flush only requires 1 liter of fluid to replace all of your old brake fluid.

Show More Show Less

Spark Plug Gapper Tool BMS Billet

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26404907

Part#: 12MMSPG

In Stock

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

Spark Plug Gapper Tool BMS Billet is essential for accurately adjusting the gap of spark plugs. This precision tool ensures that each plug is set to the exact specifications required for optimal engine performance. Made in the USA, it features a 12mm plug thread size, making it suitable for a wide range of applications.

Precision Adjustment: Allows for accurate gap adjustments to ensure optimal spark performance and engine efficiency.
Speed and Efficiency: Streamlines the process of gapping plugs while maintaining high precision, saving time and effort.
High-Quality Construction: Crafted from billet materials for durability and reliability, ensuring long-term use.
Lifetime Replacement Program: Comes with a lifetime replacement guarantee, reflecting confidence in the tool's quality and performance.

Upgrade your spark plug maintenance with the Spark Plug Gapper Tool BMS Billet for a reliable and precise solution.

Show More Show Less

70c Low Temp Oil Thermostat Kit - N54/N55

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:30031507

Part#: N54N55LTKT1

Back Ordered

Sale - Save 18% $ 152.97

This product was last offered at the strikethrough price on
05-03-2026

$ 125.58 USD

Add to Wish List

Qty

Sale - Save 18%

$ 152.97

This product was last offered at the strikethrough price on
05-03-2026

$ 125.58 USD

Add to Wish List

Upgrade your stock oil cooler thermostat for improved performance. Swap out your existing cover with ease, replacing it with a durable billet cover. Upgrade from your 110-degree Celsius thermostat to a new 70-degree Celsius version for faster oil flow and extended temperature control. With oil temperatures reaching 230 degrees Fahrenheit by the time your factory thermostat opens, initiating oil flow at lower temperatures proves more effective than attempting to cool down already elevated temperatures.

Utilizing a factory-style thermostat, this upgrade can be used in all weather conditions and allows your engine to warm up properly unlike thermostat bypass kits.

Kit contents:

Billet thermostat housing cover
Replacement gasket
Hardware
Lower temperature thermostat - 70c (158F) vs Factory 110c (230F)
Low temp thermostat spring

Show More Show Less

BMW F30 E9X TMAP Sensors & PNP Adapters

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:583821

Part#: 3.5 BAR TMAP

In Stock

$ 32.99 USD

Add to Wish List

Qty

$ 32.99 USD

Add to Wish List

JB4 3.5 bar plug and play TMAP adapters

High-Performance Ignition Service Kit - F8X S55

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21933066

Part#: S55IGKT

In Stock

Sale - Save 13% $ 285.99

This product was last offered at the strikethrough price on
05-03-2026

$ 248.31 USD

Add to Wish List

Qty

Sale - Save 13%

$ 285.99

This product was last offered at the strikethrough price on
05-03-2026

$ 248.31 USD

Add to Wish List

Every 60-80,000 miles, we recommend replacing your spark plugs to ensure your ignition system is running optimally. Over time carbon can build up around the head of the spark plug and decrease spark strength and effectiveness, leading to weaker fuel mixture detonation, misfires, and potential check engine lights. To prevent this, have put together our High-Performance Ignition Service Kits. These kits include new Bav Auto High-Performance Ignition Coils, new spark plugs, dielectric grease, and a BMW spark plug service label to keep track of when your spark plugs were replaced. Bav Auto's Ignition coils feature core windings that have been modified to increase firepower and promote a faster, more efficient burn. This gives your BMW/MINI increased torque in the lower range of RPM and more horsepower in the upper range. Exact improvements depend on the current condition of your engine, but you'll definitely feel the difference. They'll also improve your fuel economy. From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty. As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less

Burger Motorsports 3.5 Bar TMAP Sensor & 32" Extension Harness - N54 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:28504212

Part#: BMS35TMAP-32

In Stock

$ 179.00 USD

Add to Wish List

Qty

$ 179.00 USD

Add to Wish List

Use these plug-and-play adapters to quickly adapt a 3.5 BAR TMAP sensor to your N54/N55 BMW, raising the boost maximum boost range from 20psi factory up to 36psi for the 3.5 bar. For most applications the 3.5 BAR adapter is suggested which requires OEM BMW sensor part number: 13627843531.

Show More Show Less

OEM Oil Filter With Drain Plug - F80 M3, F82 M4

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:393872

Part#: 11427566327S55

In Stock

Starting at $ 28.37 USD

Add to Wish List

Starting at $ 28.37 USD

Add to Wish List

Replacement oil filter kit with a new drain plug for 2015+ F80 M3/F82 M4. This filter is for the S55 engine, used in the M3/M4 and includes the new drain bolt recommended by BMW during an oil change.

Ultimate DCT Transmission Service Kit - F10, F12, F80, F82, F87 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:41695017

Part#: F8XDCTSKKLTKT

In Stock

$ 695.08 USD

Add to Wish List

Qty

$ 695.08 USD

Add to Wish List

Keep your BMW’s dual-clutch transmission operating at its best with the Ultimate DCT Transmission Service Kit - F10, F12, F80, F82, F87—trusted by enthusiasts and professionals for maximum drivetrain protection and performance.

Show More Show Less

Comprehensive Front Skid Plate Kit - Milled Finish - BMW F80 F82 F83 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:24079600

Part#: F8XSKDPLTKT1

In Stock

Sale - Save 9% $ 712.99

This product was last offered at the strikethrough price on
05-03-2026

$ 651.74 USD

Add to Wish List

Qty

Sale - Save 9%

$ 712.99

This product was last offered at the strikethrough price on
05-03-2026

$ 651.74 USD

Add to Wish List

Genuine BMW Oil Change Kit w/ ECS Magnetic Oil Drain Plug - F8X S55 3...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:24344777

Part#: F8XS55OSKT

In Stock

$ 147.36 USD

Add to Wish List

Qty

$ 147.36 USD

Add to Wish List

Looking to change your oil and only want the best? Genuine BMW oil service kits feature the exact oil and components BMW intended for use in your premium vehicle when being serviced at the dealership. This ensures your vehicle continues to perform flawlessly, running longer and cleaner! This kit includes: 7 Liters of Genuine BMW 5w-30 Oil ECS Magnetic Drain Plug OEM Oil Filter Turner Oil Service Reminder Sticker

Show More Show Less

BMS Oil Catch Can - S55

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38621421

Part#: BMS-OCC-S55

In Stock

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Includes 18" NBT bung The S55 BMW turbo engine often faces oil control challenges, resulting in oil blow-by that contaminates the intercooler and charge piping, clogs intake valves and the VANOS system, lowers effective octane, and diminishes engine performance—especially at higher boost levels. The BMS Oil Catch Can provides the ultimate solution. Unlike generic catch cans that suffer from poor mounting, restrictive baffles, inadequate ventilation, or improper PCV integration, the BMS OCC is specifically engineered for turbo BMW applications. Key Features: ✅ CNC-machined precision construction—seamless design for a perfect fit and long-lasting durability ✅ Optimized hose diameter and flow rate—prevents crankcase pressure buildup ✅ Fully sealed PCV system—ensures no vapor leaks into the atmosphere ✅ Strategic mounting location—minimizes line length for efficient performance and a stealthy install ✅ Fast 20-minute installation—comes with all necessary hardware and is easily reversible ✅ Simple oil disposal—drain via the plug or removable base during oil changes Proudly made in the USA, the BMS Oil Catch Can delivers long-term engine protection while optimizing performance and reliability.

Show More Show Less

Ultimate DCT Transmission Service Kit

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:15744061

Part#: 28107850148KT

In Stock

$ 695.08 USD

Add to Wish List

Qty

$ 695.08 USD

Add to Wish List

The DCT transmission in your BMW is nothing short of incredible and exhilarating, but also astronomically expensive to replace. BMW has been labeling fluids as "lifetime" for quite some time now, and as enthusiasts and owners have learned over the years, there simply is no fluid that lasts a lifetime. Kit includes: 7 quarts of Pentosin DCTF-1 fluid DCT transmission cartridge and suction filters Drain and fill plugs Oil pan with gasket

Show More Show Less

BMS Billet Water/Methanol Injection Tank Cap With Safety Check Valve ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20815185

Part#: BMSWMITC

In Stock

$ 59.00 USD

Add to Wish List

Qty

$ 59.00 USD

Add to Wish List

The Burger Motorsports custom billet Water/Methanol Injection (WMI) cap includes an integrated heavy-duty check valve to let much-needed air in and prevent dangerous WMI vapor/fumes and liquid from getting out! Each cap is CNC machined in the USA from a solid block of billet aluminum, engraved with the BMS logo, and anodized blue for protection. Check valve piston must be lightly lubricated if tank shows signs of vacuum. One drop of penetrating oil or motor oil in the top will keep the check valve operational. Features and Benefits Integrated heavy-duty check valve lets air in but not out Specifically designed to prevent evaporation Keeps vapors inside the tank Made from a solid block of billet aluminum Blue anodizing for corrosion protection Exaggerated grips for easy removal Integrated heavy-duty o-ring Made in the USA

Show More Show Less

Ultimate Clutch Pedal refresh kit for various BMW Models

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:41255915

Part#: UCP301TKT

In Stock

$ 413.99

This product was last offered at the strikethrough price on
04-22-2026

$ 412.99 USD

Add to Wish List

Qty

$ 412.99 USD

Add to Wish List

Includes brand-new guides, spring, and hardware for a complete, hassle-free installation—everything needed for a full OEM-quality upgrade.

Comprehensive Front Skid Plate Kit - Wrinkle Black Finish - BMW F80 F...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:24079599

Part#: F8XSKDPLTKT2

In Stock

Sale - Save 9% $ 814.99

This product was last offered at the strikethrough price on
05-03-2026

$ 745.34 USD

Add to Wish List

Qty

Sale - Save 9%

$ 814.99

This product was last offered at the strikethrough price on
05-03-2026

$ 745.34 USD

Add to Wish List

The F8x M3/M4 models are simply amazing to drive, don't let road debris keep you from enjoying the moment. These cars have so much packed under the hood to get you this experience that it causes the oil cooler to be placed face down to the road. This makes the cooler an easy target for impact since the stock belly pan is designed from flexible plastic material. We've seen stories from small branches, scrap pieces that fell from trucks to large ice chunks that impact the cooler immediately draining the car of its oil. If you don't catch this right away this could cause serious internal engine damage from oil starvation. Turner's in-house engineering team designed a skid plate to protect your oil cooler from these unfortunate situations and still maintain a stock-like architecture. The idea was to design something much stronger that still keeps the weight to a minimum, using 8 GA 5052 Aluminum covered their goal coming in at only 5 lbs. Since the Turner skid plate weighs only 3 lbs more than the plastic OE piece, this makes the Turner plate the lightest metal option on the market. This skid plate requires no modification and mounts using the existing factory hardware the OE belly pan was fastened with. Using a trim seal to press against the oil cooler allows the airflow to pull heat from the cooler like a vacuum the same way the OE belly pan was designed. Features: Designed to maintain the OE cooling and fitment Manufactured from 8 GA 5052 Aluminum Wrinkle black powder coat finish Maintains factory hardware and mounting points No cutting or modification required 5 lbs total weight, only 3 lbs more than the plastic OE Made in America!

Show More Show Less

Eccentric Shaft Replacement Kit

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:22789670

Part#: S55SHAFTRPCKT

Ships in 3 Business Days

$ 1,209.99

This product was last offered at the strikethrough price on
06-19-2026

$ 1,208.99 USD

Add to Wish List

Qty

$ 1,208.99 USD

Add to Wish List

Ensure the peak performance of your BMW N55 or S55 engine with Turner Motorsport's Eccentric Shaft Replacement Kit. This all-inclusive kit features essential components, including:

Camshaft
Eccentric Shaft Bearing
Valve Cover Gasket Set
Gasket

Designed for precision and durability, this kit guarantees optimal engine performance and longevity. Rely on Turner Motorsport for top-quality replacement parts that adhere to the highest standards.

Show More Show Less

1 Gallon Methanol Tank - Clear/White

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:558165

Part#: 1G-MT-CL

Ships in 6 Business Days

$ 30.00 USD

Add to Wish List

Qty

$ 30.00 USD

Add to Wish List

The least expensive option available from BMS, this 1 gallon tank is compact and flexible allowing for a wide range of mounting on any flat vertical surface in the trunk. The tank is clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a compression pump feed fitting Made in USA Tank dimensions: L 11" x W 4.5 x H 9"

Show More Show Less

BMW Jack Pad Silver - Set Of 4

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26438196

Part#: BMWJACKPADSILR4

Ships in 1 Business Day

$ 77.99 USD

Add to Wish List

Qty

$ 77.99 USD

Add to Wish List

Accessory Belt Service Kit w/ Kevlar Reinforced Belt - F8X S55 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:22163426

Part#: 11287848605TKT

In Stock

$ 414.99

This product was last offered at the strikethrough price on
05-06-2026

$ 412.99 USD

Add to Wish List

Qty

$ 412.99 USD

Add to Wish List

Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes ECS Kevlar Reinforced Drive Belts, tensioner assembly, and idler pulleys. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!

Show More Show Less

BMS JB4 Port Injection Controller - F/G Chassis

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21012590

Part#: F-G-PORTINJCONMO

No longer available

The Burger Motorsports JB4 Port Injection Controller attaches to the JB4 allowing it to directly control both traditional port injection kits and WMI port injection kits. The JB4 port injection controller is a fully integrated solution allowing enhanced port injection mapping and safety. For example the JB4 port injection controller: 1) Uses low fuel pressure in conjunction with boost pressure to evaluate injection pressure and adjust PI IPW dynamically as required to maintain consistent flow volume. This becomes particularly important in applications that are at the edge of their low fuel pressure supply. As low pressure drops or oscillates port injection IPW must be dynamically adjusted to avoid run lean conditions. 2) Monitors pedal input, clutch input, gear, throttle position, etc, allowing more advanced mapping and instant cut of PI when letting off the gas or when traction control kicks in to avoid backfires. 3) Monitors AFR in both banks and can cut PI flow in the event a misfire event is detected preventing a potentially lean condition. 4) Monitors current through the injectors and sends a signal back to the JB4 altering it of various problems including a clogged or disconnected injector, blown electrical fuse, loose ground, etc. 5) Monitors fuel trims in each bank and failsafe's in the event of a mismatch of more than 15% indicating a potential boost single cylinder boost leak or injector flow issue. 6) Allows easy user adjustment of overall fuel volume using linear "Fuel Bias 0-100" values by RPM, greatly reducing the typical mapping complications when making manual tuning changes. 7) Integrates into the JB4 multi-map system which produces on-the-fly PI mapping changes when you change maps when boost is reduced in lower gears, or during anti-lag engagement. 8) When equipped with a JB4 integrated flex fuel sensor or JB4 virtual flex fuel sensor can automatically adjust port injection volume based on the E85 mixture allowing for easy mixture changes. 9) Enhanced mapping logic such as tip in supplement to boost port injection during sudden transitions like spool up or gear changes where the high-pressure pump tends to have problems keeping up. 10) Does not require a separate interface and cable for mapping and tuning port injection. It's all done right through the JB4 interface and logs greatly simplifying the process. 11) Includes an extra output to run your second fuel pump OR WMI PUMP (for port injection meth), eliminating the need for an extra Hobbs switch.

Show More Show Less

BMS DDP5800 Water/Methanol Injection Pump

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20815186

Part#: BMSDDP5800

Ships in 1 Business Day

Starting at $ 120.00 USD

Add to Wish List

Starting at $ 120.00 USD

Add to Wish List

The Burger Motorsports DDP 5800 water methanol alcohol Injection pump is a heavy-duty pump used in all of our BMS Water Injection kits. 200 psi bypass for smooth and high pressure and 1.3 GPM open flow. Made in the USA. Available with built-in quick connect fittings for 1/4" WMI line or with open 3/8" NPT threads if you plan to use braided lines.

Show More Show Less

BMS Elite Titanium Cone Seat Lug Nuts - M14x1.25 - 20

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21209837

Part#: BMS-ETLN20

In Stock

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

BMS Elite titanium lug nuts are up to 50% lighter than equivalent OEM steel lugs, have a high tensile strength, and do not succumb to heat degradation, rust, or corrosion. Material: Hot forged grade 5 titanium Ti-6AL-4V Color: Black Wight: 22g each Thread: M14x1.25 Seat: 60º Cone/Conical Hex Head: 19mm Type: Open Set: 20 Lug Nuts

Show More Show Less

Burger Motorsports 2013+ TypeB 4BAR Adapter - F2X F3X N54 N55 S55 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:599637

Part#: TYPEB4BARADAPTER

Back Ordered

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

Use these plug and play adapters to quickly adapt a 4bar TMAP sensor to your N54/N55/S55 BMW, raising the boost maximum boost range from 20psi factory up to 43psi. For very high boost applications, this 4 BAR adapter can be used which requires Bosch 4 BAR sensor (Part # 281002576). SENSOR NOT INCLUDED, Please see T#587716

Show More Show Less

Billet Spark Plug Gapper Tool - 14mm - BMS

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:583132

Part#: BMSBSPGT14MM

Ships in 7 Business Days

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

BMS Billet Spark Plug Gapper Tool - 14mm is an essential tool for achieving accurate and consistent spark plug gapping, ideal for automotive enthusiasts and professional mechanics alike. This precision tool helps maintain optimal plug performance by providing reliable, consistent gaps. Available in both 14mm and 12mm plug thread sizes, this tool is proudly made in the USA to deliver durability and precision.

Precisely gaps spark plugs for enhanced engine performance and efficiency
Speeds up the gapping process while ensuring accuracy and uniformity
Available in two sizes (14mm and 12mm) for a wider range of compatibility
Optional specialty feeler gauge included with 4 blades in thicknesses of .018, .020, .022, and .024
Made in the USA for premium quality and durability

Show More Show Less

Improved Racing BMW Oil Cooler Thermostat (180F)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:27171935

Part#: IRTHERM

Back Ordered

Starting at $ 318.99 USD

Add to Wish List

Starting at $ 318.99 USD

Add to Wish List

Precise Oil Temperature Control for Your BMW Upgrade your BMW N20, N26, N51, N52, N53, N54, N55, and S55 engine's oil temperature control with Improved Racing's high-performance oil cooler adapter. Designed to address flaws in the factory's restrictive oil cooler adapter and faulty internal flow control valve, this upgrade ensures precise oil temperature control. Improved Racing's thermostat provides quick engine warmup, prevents overcooling, and delivers full oil cooling capacity on demand. Trusted by professional race teams around the globe, Improved Racing's thermostats have proven highly reliable, are backed by a lifetime warranty, and are made in the USA. Option to Use the Factory Oil Cooler and Lines The optional factory oil line adapter allows you to use the factory oil cooler lines for a simple, plug-and-play installation. For maximum performance, the factory oil cooler and lines may be replaced with an aftermarket cooler and AN lines using the AN adapter fittings (-10AN line size is recommended). Please note that some applications, such as most BMW SUV's, use a water-to-oil heat exchangers. These applications require plugging the coolant supply and return ports, as well as adding an external air-to-oil cooler and lines (factory or aftermarket). Please note the Oil cooler adapter cannot be used without an oil cooler.

Show More Show Less

2 Gallon Low Profile Universal Methanol Tank

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20946755

Part#: 2G-ULPMT

In Stock

Starting at $ 179.00 USD

Add to Wish List

Starting at $ 179.00 USD

Add to Wish List

Integrated pump mount for a super clean install. This tank allows the pump (sold separately) to mount to the bottom of the tank making for a clean and fast installation. It’s universal and will fit a wide variety of trunk applications. The larger capacity means more time between fill ups. Offered in black for a stealth appearance and in clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Compatible with BMS DDP5800 pumps, ES4714512 or ES4714513 Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Pump mounts directly to the tank Compatible with all DDP 5800 pumps Super low profile design Available in clear for visually checking fluid levels Available in black for a stealth appearance Includes 2-way vented black plastic cap 4 mounting holes in the feet of the tank Includes a compression pump feed fitting, 2 90 degree push fittings, 9" of methanol line and pump mounting hardware. Made in the USA Tank dimensions: L 15.5" x W 8" x H 8.25"

Show More Show Less

Billet Oil Thermostat Lid

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21045480

Part#: BMS-TLID

Ships in 1 Business Day

Starting at $ 39.00 USD

Add to Wish List

Starting at $ 39.00 USD

Add to Wish List

These billet CNC replacement aluminum oil thermostat lids and caps are an excellent way to add some color and style to your N54 N55 S55 engine bay. Anodized black, red or blue. Easy to install and made in the USA. Can be used with or without the BMS Sport Oil Cooler Valve.

Show More Show Less

1.25 Gallon Heavy-Duty Universal Methanol Tank

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20946761

Part#: 1.25G-UMT-CL

Ships on Jul 21, 2026

$ 69.00 USD

Add to Wish List

Qty

$ 69.00 USD

Add to Wish List

This tank is thicker and stronger than BMS' basic 1-gallon WMI tank. This tank features an easy fill filler nozzle, an anti-starvation reservoir with a pre-threaded bung for the included 90º compression pump feed fitting, a spill-catcher reservoir around the filler cap, a 2-way vented black plastic cap, and is translucent to allow visually checking the fluid level. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits 1.25 Gallon Tank (4.73 Liters) Anti-Starvation Reservoir Easy Fill filler Nozzle Spill-Catcher Reservoir around the filler cap Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a 90º compression pump feed fitting Tank dimensions: L 11" x W 4.5 x H 9"

Show More Show Less

Burger Motorsports Turbo Double Baffle Oil Catch Can - F23 235i Conve...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5567062

Part#: OCCN55-235VERT

Ships on Jul 21, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

It's no secret that BMW turbo motors can suffer from oil control problems causing oil to blow through and coat the intercooler and charge piping, gunking up intake valves and the VANOS system, lowering the effective octane, and generally degrading engine performance. The higher your boost levels the more apparent these problems become. The solution to this problem has finally arrived. The BMS oil catch can. While there are other catch cans on the market they all fall short in various areas. Some are mounted on the hot/turbo side of the motor preventing proper vapor condensation. Others utilize hoses that are too small and runs that are too long to allow proper PCV ventilation causing internal motor/ring sealing issues. Some have insufficient or no internal baffle system while others have internal baffles systems that are too restrictive. Some even bypass the PCV system all together venting crankcase gas and odor to the atmosphere. Most are simply repackaged oil catch cans from smaller / lower power motors shoehorned into place in the turbo BMW engine bay. To solve these problems BMS designed their oil catch can kit from the ground up specifically for the turbo BMW application. It features 100% CNC machining with zero welding for a precision fit and long life. The can itself is guaranteed for the life of the vehicle. The hoses exceed the OEM PCV piping in diameter and that flow rate is maintained throughout the entire oil catch can ensuring no excessive crankcase pressure buildup. The BMS OCC retains the factory fully closed loop PCV operation preventing any PCV vapor from leaking to the atmosphere. The mounting locations are selected to minimize the line length, allow more efficient operation, and retain a stealth look. Install takes around 20 minutes, includes all required hardware, and is 100% reversible. Simply unscrew the base of the can or use the drain plug to safely dispose of captured oil with the rest of your used motor oil during oil changes. Made in USA. FEATURES AND BENEFITS Increases Air Intake Efficiency Promotes Engine Longevity Non-Clogging Air/Oil Separation Double Baffle Large 16mm+ inlet and outlet exceeds OEM PCV sizing Free Flow Solid No Restriction Design Retains factory fully closed loop PCV operation Large Intake/Outlet No Tapering Down Stealth Mounting on Cool Side of the Motor Anodized Black Aluminum N54 Model Mounts Out of Sight Under the Cowl Made in USA & Guaranteed for Life Non-Clogging, No Service Needed Air/Oil Separation Double Baffle High flow to eliminate crankcase pressure caused by more restrictive designs Precision CNC Machined from Solid Blocks of High Grade Aluminum DIMENSIONS Can dimensions with lid: 4.4" (111mm) Tall Can Diameter: 2.7" (68.5mm) Lid Length: Back to nozzle end: 4" (101mm) Nozzle Outer Diameter: .75" (19.2mm) Nozzle Inner Diameter: 0.669" (17mm) Can Capacity: 2.5 oz (74 ml)

Show More Show Less

Burger Motorsport JB4-Compatible Water/Methanol Injection System - N2...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:558163

Part#: BMS-WMI

Ships on Jul 21, 2026

Starting at $ 226.99 USD

Add to Wish List

Starting at $ 226.99 USD

Add to Wish List

Looking to make loads of power on pump gas? Enter: water/methanol injection. Regardless if you're tuned for conventional pump gas, E85, or race fuel, use of a properly configured and integrated water/meth system will reduce temperatures, allowing you to make more power than on just conventional fuel alone. Select your engine-specific nozzles (which are standard 1/8" NPT and install in most aftermarket chargepipes), your tank to mount in the trunk, upgraded steel braided lines if you so choose, and some boost juice and you just need a management solution! Optionally, add a BMS FSB for JB4 integration!

Show More Show Less

Eccentric Shaft Replacement Kit - N55/S55

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21735862

Part#: CAMGSKTN55S55KT

Ships in 3 Business Days

$ 1,209.99

This product was last offered at the strikethrough price on
06-19-2026

$ 1,208.99 USD

Add to Wish List

Qty

$ 1,208.99 USD

Add to Wish List

When it comes to optimizing the performance and longevity of your BMW N55 or S55 engine, few upgrades can rival the impact of replacing the camshaft, bearings, and gaskets. These essential components play a pivotal role in your engine's overall health and performance, and upgrading them can deliver a host of benefits, from increased power to enhanced reliability. In this article, we'll explore the advantages of investing in these critical upgrades for your BMW N55 or S55 engine. Improved Performance: Upgrading your BMW N55 or S55 engine with a new camshaft can significantly boost its performance. A high-quality camshaft can optimize valve timing, leading to improved airflow and combustion efficiency. This, in turn, results in increased horsepower and torque, providing you with a more exhilarating driving experience. If you're seeking that extra punch when you hit the gas pedal, a new camshaft is the way to go. Enhanced Durability: The camshaft, bearings, and gaskets are fundamental components of your engine's internal structure. Over time, wear and tear can cause these parts to degrade, potentially leading to catastrophic engine failure. By replacing these components with high-quality, performance-oriented alternatives, you're not only increasing horsepower but also reinforcing the engine's durability. This can help prevent costly breakdowns and extend the life of your BMW engine. Optimal Efficiency: Efficiency is a key factor in engine performance. Worn-out bearings and gaskets can lead to oil leaks and reduced engine efficiency. Replacing them ensures a tighter seal, minimizing oil leaks and maintaining the proper lubrication for all moving parts. This leads to better fuel efficiency and a smoother, more reliable engine operation, all while reducing maintenance costs in the long run. Increased Resale Value: Investing in high-quality components like camshafts, bearings, and gaskets not only enhances your driving experience but also adds value to your BMW. When it's time to sell or trade-in your vehicle, potential buyers or dealerships will recognize the value of these upgrades, making your car more desirable and potentially increasing its resale value. Kit for All N55/S55 Engines

Show More Show Less

European Socket Starter Kit

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:41695009

Part#: EUROHEADSET1KT

Ships on Sep 2, 2026

Sale - Save 18% $ 124.99

This product was last offered at the strikethrough price on
05-03-2026

$ 102.15 USD

Add to Wish List

Qty

Sale - Save 18%

$ 124.99

This product was last offered at the strikethrough price on
05-03-2026

$ 102.15 USD

Add to Wish List

Exceptional tools designed to handle all types of European fasteners with ease.

Water Pump & Thermostat Replacement Kit - 90*C - F8X M2 M3 M4 S55 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:30197967

Part#: 11517846361KT4

Ships on Nov 11, 2026

$ 487.99

This product was last offered at the strikethrough price on
02-03-2026

$ 422.99 USD

Add to Wish List

Qty

$ 422.99 USD

Add to Wish List

The water pump is a known weak point across all BMW models, requiring servicing every 60,000 miles. Along with the water pump, it’s wise to replace the thermostat to ensure your cooling system operates at peak efficiency.

This kit features a 90°C (194°F) thermostat from Hamburg Technic, which opens approximately 15°C earlier than the standard factory thermostat. This lower temperature is particularly advantageous for performance-focused applications.

What's Included:

Genuine BMW Mechanical Water Pump Assembly (11517846361) Hamburg Technic Performance Thermostat - 90°C/194°F (11537586885) Genuine BMW Coolant/Antifreeze - Diluted, 1 Gallon (82141467704) Benefits of a Lower Thermostat Temperature:

Enhanced Engine Cooling: Opens sooner to reduce engine temperature more effectively. Improved Performance: Keeps engine components cooler, allowing for better performance in high-stress conditions. Extended Engine Life: Reduces thermal stress on engine parts, promoting longevity. Prevents Overheating: Helps to avoid overheating in demanding driving scenarios. Optimized Fuel Efficiency: Maintains ideal engine temperature for efficient fuel combustion. Elevate your BMW's cooling system and performance with this expertly curated kit from Turner Motorsport.

Show More Show Less

BMW Jack Pad Blue - Pair

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:31191904

Part#: BMWJACKPADBLUE2

Back Ordered

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

BMW Jack Pad Blue - Pair provides a professional-grade solution for safely lifting your BMW. Designed to fit perfectly at the factory jack points, this metal jack pad adapter ensures that you can lift your BMW, 2020 Supra, or MINI without risking damage to the jack points, rocker panels, or undercarriage.

Safe Lifting: Designed for use at factory jack points to prevent damage.
Durable Construction: Made from solid billet aluminum for long-lasting performance.
Convenient Design: Easy to use with any floor jack, features a honeycomb grip pattern for stability.
Non-Damaging: Does not touch or harm painted surfaces.
USA Made: Crafted in the USA with precision and quality.

This jack pad adapter is a must-have tool for enthusiasts who want to lift their vehicles securely and correctly every time.

Show More Show Less

Oil Drain Plug

For vehicles with a production date from 09/2014

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:41188174

Part#: 11137535106TKT

In Stock

Sale - Save 29% $ 8.99

This product was last offered at the strikethrough price on
05-03-2026

$ 6.35 USD

Add to Wish List

Qty

Sale - Save 29%

$ 8.99

This product was last offered at the strikethrough price on
05-03-2026

$ 6.35 USD

Add to Wish List

Includes a one time use crush washer.

Water/Methanol Injection Hose - 20'

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21176944

Part#: BMS-WMI-IL

In Stock

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

Thermostat Installation Kit with Thermostat - N54, N55, S55

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:55353595

Part#: OTN54.T85KT3

In Stock

$ 390.23 USD

Add to Wish List

Qty

$ 390.23 USD

Add to Wish List

High oil temperatures are the ultimate enemy of your engine's longevity and performance. If you want to keep pushing your BMW to the limit you need to manage the heat.

VRSF Charge Pipe Upgrade Kit

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:55353627

Part#: 10801050/60KT2

In Stock

$ 439.99 USD

Add to Wish List

Qty

$ 439.99 USD

Add to Wish List

If your brake pedal is starting to feel like a wet sponge and you’re missing that sharp, decisive bite when you drop anchor before a corner, your BMW is trying to tell you something.

Turner Skid Plate and Hardware Installation Kit

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:55353630

Part#: 021491TMS01KT2

In Stock

$ 649.99 USD

Add to Wish List

Qty

$ 649.99 USD

Add to Wish List

One stray piece of road debris, a harsh track transition, or an unforgiving speed bump can instantly puncture your oil cooler—leaving you with a catastrophic engine failure before you even have a chance to pull over.

Show More Show Less