BMW OEM Replacement Brake Rotors & Discs for BMW F80 M3 S55 3.0L

Clear BMW chassis

Please ensure your correct model is selected

Turner Motorsport sells replacement rotors for your BMW and MINI. These are a direct replacement for your stock rotors but at better pricing than what you would find at a dealership. These rotors come from Original Equipment Manufacturers or performance alternatives and are made to BMW's own design spec with the same performance, reliability, and longevity as BMW-brand rotors. Our rotors are made by the same suppliers that BMW and other German brands use. Given the importance of brakes we pay extra special attention to the brand and quality of the rotors we are selling. We stick with known and proven brands in the German OEM market - Ate, Balo, Brembo, Centric, Zimmerann, Sebro, Stoptech, and of course, Genuine BMW. Many of the rotors we sell come with a corrosion-inhibiting coating that protects the cast iron from rust. Rotors are priced as pairs unless otherwise noted.
Sort By:

SHW Performance - Corporate Logo
T#:49265655
Part#: 34112284809KKT
In Stock
$ 646.99 USD
$ 646.99 USD
Brake rotors wear down over time, often resulting in grinding, pulsating, squeaking, and glazing at the end of their lifespan. If you are experiencing any of these issues, we recommend replacing your brake rotors ASAP to ensure braking performance, comfort, and safety. These SHW Performance rotors are the perfect replacement option, offering the same great design from BMW without the Genuine BMW price tag. Featuring a cross-drilled pattern and directional internal veining, these brake rotors are designed to stay cool even under hard braking, offering great performance on both the street and track. SHW Performance is the OE provider of brake rotors for multiple European auto manufacturers, including BMW, and is known for its exceptionally high quality, both in terms of design and materials. All SHW rotors meet or exceed Genuine BMW standards and are likely the same rotors that were installed by BMW at the factory, just without the BMW logos and price markup. We recommend replacing brake rotors in pairs to ensure even wear and braking consistency. New brake rotors should always be paired with new brake pads and hardware as well to prevent uneven wear and premature glazing or warping.
Show More Show Less
Front 2-Piece Brake Rotors - Pair - 400mm
Allows for an easy conversion from Carbon Ceramic to Steel Rotors
Girodisc - Corporate Logo
T#:11268520
Part#: A1-220
In Stock at Vendor
$ 1,450.00 USD
$ 1,450.00 USD
The Girodisc system is a direct replacement iron rotor for the OEM Carbon disc, no modifications are necessary. The disc will bolt directly to the car and work with OEM calipers and pads perfectly. The central hat section of our rotor is made from strictly U.S. sourced 6061-T6 aircraft specification aluminum. The disc is made from our own proprietary cast iron, poured in the USA and machined from start to finish in house at Girodisc. The rotor utilizes a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the disc. The rotor and hat have a floating mount system, which utilizes 12 high strength alloy steel drive pins, manufactured by Girodisc in the USA to our own specifications and cadmium plated for a long lasting corrosion resistance. These pins take the load from braking actions while maintaining the axial and radial float between the hat and disc. The pins are secured by class 12.9 cap screws with hardened washers. In order to keep the rotors from making noise when cold, the pins are mounted with anti-noise spring washers on the rotor side which allow the rotor to grow with heat expansion but eliminate the rattle and noise associated with floating rotors. This float also allows the rotor to self center between the pads. Once the Girodisc system is in place, simply replace the cast iron rotor when needed.
Show More Show Less
Rear 2-Piece Brake Rotors - Pair - 380mm
Allows for an easy conversion from Carbon Ceramic to Steel Rotors
Girodisc - Corporate Logo
T#:11268521
Part#: A2-220
In Stock at Vendor
$ 1,400.00 USD
Free Shipping on orders $49 and up
$ 1,400.00 USD
Free Shipping on orders $49 and up
The Girodisc system is a direct replacement iron rotor for the OEM Carbon disc, no modifications are necessary. The disc will bolt directly to the car and work with OEM calipers and pads perfectly. The central hat section of our rotor is made from strictly U.S. sourced 6061-T6 aircraft specification aluminum. The disc is made from our own proprietary cast iron, poured in the USA and machined from start to finish in house at Girodisc. The rotor utilizes a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the disc. The rotor and hat have a floating mount system, which utilizes 12 high strength alloy steel drive pins, manufactured by Girodisc in the USA to our own specifications and cadmium plated for a long lasting corrosion resistance. These pins take the load from braking actions while maintaining the axial and radial float between the hat and disc. The pins are secured by class 12.9 cap screws with hardened washers. In order to keep the rotors from making noise when cold, the pins are mounted with anti-noise spring washers on the rotor side which allow the rotor to grow with heat expansion but eliminate the rattle and noise associated with floating rotors. This float also allows the rotor to self center between the pads. Once the Girodisc system is in place, simply replace the cast iron rotor when needed.
Show More Show Less

SHW Performance - Corporate Logo
T#:49265653
Part#: 34212284811KKT
In Stock
$ 745.99

This product was last offered at the strikethrough price on
05-02-2026

$ 742.99 USD
$ 742.99 USD
Brake rotors wear down over time, often resulting in grinding, pulsating, squeaking, and glazing at the end of their lifespan. If you are experiencing any of these issues, we recommend replacing your brake rotors ASAP to ensure braking performance, comfort, and safety. These SHW Performance rotors are the perfect replacement option, offering the same great design from BMW without the Genuine BMW price tag. Featuring a cross-drilled pattern and directional internal veining, these brake rotors are designed to stay cool even under hard braking, offering great performance on both the street and track. SHW Performance is the OE provider of brake rotors for multiple European auto manufacturers, including BMW, and is known for its exceptionally high quality, both in terms of design and materials. All SHW rotors meet or exceed Genuine BMW standards and are likely the same rotors that were installed by BMW at the factory, just without the BMW logos and price markup. We recommend replacing brake rotors in pairs to ensure even wear and braking consistency. New brake rotors should always be paired with new brake pads and hardware as well to prevent uneven wear and premature glazing or warping.
Show More Show Less

Select Vehicle