BMW Tools & Specialty Equipment for BMW F80 M3 S55 3.0L

PRESSURE BRAKE BLEEDER:

We know bleeding brake alone is not only no fun, but much more complicated than it needs to be. Having a pressure bleeder give you the ability to keep the pressure on the brake system while you go under and crack open the bleeder screws to relieve the air pockets.

Features:

• Holds a full 3-Liters (3.17 qts) of brake fluid
• Easy to read 0-30 lbs pressure gauge built into the tank top
• Pressure relief valve for safe release of pressure
• 40" hose with detachable swivel fitting

FLUID CATCH BOTTLE:

keep your fluid's off the floor and into our catch bottle.  The bottle has fluid level markings from 0.2L to 0.7 liter. This feature allows you to measure how much fluid you have sent thru the system.  Our bleeder bottle features an expandable/collapsible top portion for easier storage. Gasket in cap prevents leakage. Tubing is extra long at 24" from cap to nipple. Flexible hose can be pushed down into bottle for storage when done. Bottle now features a handy hanger bracket to hang bottle from bottom of car.

Note:

• Do not exceed 20 PSI
• LIFETIME REPLACEMENT

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

46 PIECE SET:

This 1/4" set contains all the most popular tools needed to get the job done on your European car repair.

Kit Contains:

-13PCS-1/4" DR.6PT SOCKETS: 4, 4.5 , 5 ,5.5 ,6 , 7, 8 ,9 ,10, 11, 12, 13, 14MM 

-1PC- 1/4" DR. QUICK RELEASE RATCHET (72T).

-2PC- 1/4" DR.50 & 100MM EXTENSIONS 

-1PC- 1/4" DR.150MM FLEXIBLE EXTENSION

-1PC- 1/4" DR.UNIVERSAL JOINT

-1PC- 1/4" DR.SLIDING T-BAR

-1PC- 1/4" DR.6" SPINNER HANDLE

-1PC- 1/4" DR.1/4" BIT HOLDER ADAPTER

-4PCS-HEX KEY WRENCHES:1.27, 1.5,2,2.5MM

-6PCS-1/4" HEX SOCKETS:3,4,5,6,7,8MM

-3PCS-1/4' SLOTTED SOCKETS:4,5.5,7MM

-3PCS-1/4" PHILIPS SOCKETS:PH1, PH2, PH3

-3PCS-1/4"POZI SOCKETS: PZ1, PZ2, PZ3

-6PCS-1/4" TORX SOCKETS: T10, T15, T20, T25, T30, T40

TRIM/MOLDING SET:

Plastic five-piece tool kit removes trim and door panels, moldings, and adhesive backed logos and badges, without damage.

Made of impact resistant plastic that will not mar surfaces as metal screwdrivers and pry bars will. Slim design for delicate work in tight areas.

Kit includes:

• Wide edge remover

• Narrow edge remover

• Pull-type remover

• Handle remover

• Upholstery clip remover

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

AGA Tools' Clean Oil Funnel Kit is expertly designed to streamline and improve the engine oil-filling process, catering to the needs of both professional auto shops and DIY enthusiasts.

With a set of 13 manufacturer-specific adapters, the kit accommodates a broad spectrum of vehicles, including the latest BMW and Mercedes-Benz models featuring the 1/4 turn style. The kit includes a comprehensive information card that showcases color-coded adapters for easy reference.

The funnel features a generously wide mouth, enabling the spill-free pouring of an entire quart of oil. Designed to adapt to angled valve covers, the kit comes with angled attachments, ensuring compatibility with various configurations. After use, seal the funnel by capping the tip and closing the lid to prevent leaks and the entry of debris.

Additionally, the kit incorporates the Clean Oil Vacuum Regulator adapter (sold separately). Employing the Vacuum Regulator and adapter allows for the installation of AGA's Clean Oil Drain Plug or Adapter Test Block, facilitating a quick and immaculate oil change process.

Ensure safe and professional jacking of your BMW, 2020 Supra, or MINI with the Turner Motorsport Jack Pad Adapter. Designed to mimic the factory scissor jack, this adapter allows for secure lifting at any of the 4 factory jack points without causing damage to your vehicle. Made in the USA from solid billet aluminum, it features the Burger Motorsports logo and a honeycomb grip pattern for stability. Simple to use and compatible with most floor jacks, it ensures correct and secure lifting every time. Here are the key benefits:

• Safely lifts your BMW, 2020 Supra, or MINI at factory jack points
• Prevents damage to rocker panels or vehicle undercarriage
• Made from solid billet aluminum for durability
• Engraved Burger Motorsports logo for authenticity
• Honeycomb grip pattern for stability during use

TORX SCREWDRIVER SET:

Handy Torx® screwdriver set includes six common bit sizes, perfect for removing door and dashboard panels, interior trim, and smaller underhood components.

Hardened tips have center hole for use with both standard or tamper-proof Torx fasteners. Large grips add comfort and leverage. Handle through-holes make them easy to hang from pegboard hooks.

Entire kit packaged in a convenient molded case.

Sizes include: T10, T15, T20, T25, T27, and T30.

STANDARD SCREWDRIVER SET:

Elevate your craftsmanship with the Schwaben 6 Piece Screwdriver Set!

Crafted with precision and durability in mind, these professional-grade screwdrivers stand the test of time, ensuring reliable performance for countless projects.  Constructed from robust nickel chrome moly, these screwdrivers are built to endure rigorous use, making them reliable companions for various tasks. That's why it's backed by our LIFETIME REPLACEMENT program - because we want this set to stick with you as long as you need it to!

Features:

• Color-Coded Brilliance: Effortlessly switch between flat head and Philips heads, thanks to the intuitive color-coded design. Enhance efficiency and eliminate guesswork.
• Comfortable Control: Experience fatigue-free operation with the ergonomic handles, offering both comfort and precision for intricate tasks.
• Organized Housing: Housed in a molded tray, these commonly used screwdriver sizes are easily portable and organized, reducing the hassle of rummaging through toolboxes.
• Essential Sizes: Curated for versatility, the set includes sizes catering to delicate tasks and robust projects, covering all your needs.

Includes:

• 5.5x100mm flat head screwdriver

• 6.5x150mm flat head screwdriver

• 8x175mm flat head screwdriver

• #1x75mm Phillips screwdriver

• #2x100mm Phillips screwdriver

• #3x150mm Phillips screwdriver

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

BMW E60 M5 Crank Case Test Cap

The BMW E60 M5 Crank Case Test Cap is designed to facilitate accurate testing of crankcase pressure across a range of vehicle models. This versatile test cap is compatible with early and late model vehicles equipped with steel, aluminum, or plastic valve covers. Featuring a multi-diameter fitting, it connects directly to IMIBs, handheld manometers, and smoke machines, eliminating the need for adapters and ensuring precise readings without leaks.

Benefits:

• Versatile Compatibility: Suitable for use with steel, aluminum, and plastic valve covers on early and late model vehicles.
• Direct Connection: Multi-diameter fitting allows direct connection to IMIBs, handheld manometers, and smoke machines.
• Leak Prevention: Eliminates the need for adapters, reducing the risk of leaks and inaccurate readings.
• Enhanced Accuracy: Provides reliable crankcase pressure testing for better diagnostic results.

LOW PROFILE JACK:

Meet the Schwaben Long Low Profile - High Lift Floor Jack: A Must-Have for BMW and MINI Enthusiasts.

Experience unmatched lifting efficiency with the Schwaben Long Low Profile - High Lift Floor Jack. Engineered with BMW and MINI enthusiasts in mind, this jack boasts a unique blend of features tailored to your beloved vehicles.

Key Features:

• Swift Reach: Innovative One Pump feature ensures quick contact with most cars.
• Versatile Reach: Ultra-long arm accommodates lowered cars and high vehicles like trucks and SUVs.
• Safety Assured: Overload system prevents usage beyond its rated capacity, enhancing security.
• Precision Control: Universal joint on the handle offers precise load management.
• Seamless Positioning: Swivel saddle and rear casters enable easy jack placement.
• Vehicle Care: Soft foam sleeve on the handle safeguards your vehicle's finish.
• Protective Padding: Rubber saddle pad shields your car during lifting.
• Added Convenience: Equipped with a tool tray on the jack for lug nuts and tools.
• LIFETIME REPLACEMENT: If this jack is injured in the line of duty, it will be backed by our lifetime replacement policy!

Specifications:

• Minimum Height: 2-3/4"
• Maximum Height: 24"
• Handle Length: 49-1/4"
• Jack Body Length: 35"
• Distance to Jack Pad Center from Pivot Point: 22"
• Front Caster Dimensions: 2-1/2" diameter x 2" width
• Saddle Diameter: 4" with full saddle pad
• Max Weight Capacity: 4000 lbs.
• ANSI / ASME PALD 2009 Certified

DRAIN PAN:

Features:

• Use it for oils or coolant
• Only 125mm high!
• Rolls on 4 casters for ease of use

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

PADDED CREEPER:

Having a creeper can make working under the car much easier and more comfortable, roll in and out, padding, and keeping those clothes a bit cleaner. 

 Features:

• Thick fully padded leatherette cover.
• 40" long with heavy-duty metal support frame.
• 1"" steel tube frame.
• Four position adjustable headrest.
•  Six 2 1/2"oil-resistant rollers.
• Powder coated frame to resist rusting.
• Overall dimensions: 17" x 40" X 4"
• Ground clearance: 1-1/2"
• Ball bearing swivels on wheels.
• 250lb capacity.

PADDED CREEPER SEAT:

This rolling creeper seat is the  ideal height for many jobs. If you are working on the lower half of your car, this seat is a must have. Brakes, wheels, waxing, washing and more. 

Features:

• 2-1/2" thick padded leatherette seat.
• 14" high. x 14" wide x 20" long.
• 1" steel tube frame.
• Divided tool tray below seat.
• Four 2" wheels.
• 2-1/2" ground clearance.
• Ball bearing swivels on all wheels.
• 250 lb capacity.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

The Universal 40 Piece Metric Socket Set includes all of the necessary tools to create a socket set by purchasing only one ratchet. The included 3/8-inch drive flex head ratchet and two female 3/8-inch drive adapters will allow you to use 3 different drive sizes of sockets: 1/4", 3/8", and 1/2"! Use this kit to help complete your tool kit until you decide to purchase more ratchet sizes, and when you do, you don't have to get rid of any of these tools to do so, which is possible with the adapters.

And of course, this kit is included in our LIFETIME REPLACEMENT program!

Includes:

• 4 mm (1/4" Drive)
• 4.5 mm (1/4" Drive)
• 5 mm (1/4" Drive)
• 5.5 mm (1/4" Drive)
• 6 mm (1/4" Drive)
• 7 mm (1/4" Drive)
• 8 mm (1/4" Drive and 3/8" Drive)
• 9 mm (1/4" Drive and 3/8" Drive)
• 10 mm (1/4" Drive, 3/8" Drive, and 1/2" Drive)
• 11 mm (1/4" Drive and 3/8" Drive)
• 12 mm (1/4" Drive and 3/8" Drive, and 1/2" Drive)
• 13 mm (1/4" Drive and 3/8" Drive, and 1/2" Drive)
• 14 mm (1/4" Drive and 3/8" Drive, and 1/2" Drive)
• 15mm (3/8" Drive and 1/2" Drive)
• 16mm (3/8" Drive and 1/2" Drive)
• 17mm (3/8" Drive and 1/2" Drive)
• 18mm (3/8" Drive and 1/2" Drive)
• 19mm (3/8" Drive and 1/2" Drive)
• 21mm (1/2" Drive)
• 22mm (1/2" Drive)
• 24mm (1/2" Drive)

The Schwaben 24 Piece 1/2" Drive 6 Point Deep and Standard Socket Set comprises two dozen 1/2-inch metric sockets, each featuring 6-point heads specially crafted for navigating those tricky, confined spaces. With a length of 76mm, the deep sockets ensure you can reach critical areas with ease.

Furthermore, our LIFETIME REPLACEMENT program provides you with added assurance, ensuring enduring performance and value. Improve your toolkit with the Schwaben 24 Piece 1/2" Drive 6 Point Deep and Standard Socket Set and confidently tackle any task at hand.

Features:

Access Tight Spaces: These deep sockets, measuring 76mm in length, are expertly designed to reach challenging, confined areas, making them perfect for intricate tasks.

Organized Storage: Included in the set is a practical sliding rail socket holder, helping you maintain a tidy and easily accessible socket arrangement.

Enhanced Grip: Knurled rings encircling the socket bodies ensure a secure hold, even when hands and sockets are covered in oil or grease, minimizing the risk of accidents.

Optimal Torque: The sockets are equipped with corner radii for superior torque distribution, safeguarding fasteners from damage and ensuring efficient performance.

High-Quality Material: Crafted from robust chrome vanadium steel (CR-V), these sockets offer superior wear resistance and toughness compared to high-speed steel, guaranteeing durability and extended lifespan.

Satin Chrome Finish: Not only do the sockets feature an attractive satin chrome finish, but they also provide excellent corrosion resistance, ensuring long-term quality.

Lifetime Replacement: Supported by our lifetime replacement program, this set delivers enduring value and peace of mind, making it a wise addition to your toolkit investment.

Includes:

• 10 mm - deep and standard socket
• 12 mm - deep and standard socket
• 13 mm - deep and standard socket
• 14 mm - deep and standard socket
• 15 mm - deep and standard socket
• 16 mm - deep and standard socket
• 17 mm - deep and standard socket
• 18 mm - deep and standard socket
• 19 mm - deep and standard socket
• 21 mm - deep and standard socket
• 22 mm - deep and standard socket
• 24 mm - deep and standard socket

The Schwaben 24 Piece 3/8" Drive 6 Point Deep and Standard Socket Set comprises two dozen 3/8-inch metric sockets, each featuring 6-point heads specially crafted for navigating those tricky, confined spaces. With a length of 63mm, the deep sockets ensure you can reach critical areas with ease.

Furthermore, our LIFETIME REPLACEMENT program provides you with added assurance, ensuring enduring performance and value. Improve your toolkit with the Schwaben 24 Piece 3/8" Drive 6 Point Deep and Standard Socket Set and confidently tackle any task at hand.

Features:

Access Tight Spaces: These deep sockets, measuring 63mm in length, are expertly designed to reach challenging, confined areas, making them perfect for intricate tasks.

Organized Storage: Included in the set is a practical sliding rail socket holder, helping you maintain a tidy and easily accessible socket arrangement.

Enhanced Grip: Knurled rings encircling the socket bodies ensure a secure hold, even when hands and sockets are covered in oil or grease, minimizing the risk of accidents.

Optimal Torque: The sockets are equipped with corner radii for superior torque distribution, safeguarding fasteners from damage and ensuring efficient performance.

High-Quality Material: Crafted from robust chrome vanadium steel (CR-V), these sockets offer superior wear resistance and toughness compared to high-speed steel, guaranteeing durability and extended lifespan.

Satin Chrome Finish: Not only do the sockets feature an attractive satin chrome finish, but they also provide excellent corrosion resistance, ensuring long-term quality.

Lifetime Replacement: Supported by our lifetime replacement program, this set delivers enduring value and peace of mind, making it a wise addition to your toolkit investment.

Includes:

• 8 mm - deep and standard socket
• 9 mm - deep and standard socket
• 10 mm - deep and standard socket
• 11 mm - deep and standard socket
• 12 mm - deep and standard socket
• 13 mm - deep and standard socket
• 14 mm - deep and standard socket
• 15 mm - deep and standard socket
• 16 mm - deep and standard socket
• 17 mm - deep and standard socket
• 18 mm - deep and standard socket
• 19 mm - deep and standard socket