BMW Brakes & Brake Parts for BMW F80 M3 S55 3.0L

Brake pad wear sensors are a convenient part of the braking system, notifying the driver of when the material on the brake pads are getting low and need to be serviced. Unfortunately it is common in custom or upgraded braking systems that the pad wear sensor is non-existent or does not mate properly with the connector on your vehicle, leaving you with a brake pad wear warning every time you start your vehicle.

ECS Tuning has developed this direct-fit Brake Pad Wear Sensor Bypass to alleviate this issue. This sensor bypass will trick the vehicle's electronics into thinking that the brake pads have adequate pad material to keep the dashboard warning from appearing. No more unnecessary warnings when installing a big brake kit or your own custom setup. This bypass is a plug-and-play component that requires no modifications so you can revert back to your OEM setup if necessary.

Some vehicles may be equipped with two front brake pad wear sensors, or a front and rear sensor, please be sure to double check the required quantity for your vehicle before placing an order.

*During installation, make sure to clean the mated female connector on your vehicle of any dirt or debris to ensure that the Brake Pad Wear Sensor Bypass is engaged securely.

MMX Performance front disc/rotor upgrades are designed to directly replace your OEM brake discs/rotors and come as a pair complete with left and right-handed, two-piece floating discs. Each disc not only weighs less than the OEM part but also features much larger, more efficient directional cooling vanes to ensure even braking performance, pad wear, and cooling capability.

Left and right-handed 380x30mm discs sold in a pair.

MMX Performance products have been designed and developed in the UK with passion by enthusiasts, for enthusiasts. All of our products are created in the world's toughest development lab: motorsport. We push the limits and reach new heights on track; then refine our products to give you the performance you need when you want it on the road.

Our extensive range of BMW and MINI upgrades offer unrivalled quality, performance and reliability worldwide; furthermore, every product carrying the MMX logo is thoroughly durability tested both on the road and track, so you can have complete peace of mind that you're installing only the best quality products to unlock the true performance potential from your car.

Key Benefits:

• High-Performance: Specifically designed for high-speed, hard braking applications.
• Aggressive Stopping Power: Ideal for track use, ensuring quick and reliable deceleration.
• Temperature Resistant: Effective in high-torque situations, functioning optimally at elevated temperatures.
• Compatibility: Recommended to pair with DTC-70 for optimal front and rear axle performance.
• Versatile Options: Hawk provides a range of pads to suit both track and street driving needs.

MMX Performance disc/rotor upgrades are designed to directly replace your OEM brake discs/rotors and come as a pair complete with left and right-handed, two-piece floating discs. Each disc not only weighs less than the OEM part but also features much larger, more efficient directional cooling vanes to ensure even braking performance, pad wear, and cooling capability.

Left and right-handed 370x24mm discs sold in a pair.

MMX Performance products have been designed and developed in the UK with passion by enthusiasts, for enthusiasts. All of our products are created in the world's toughest development lab: motorsport. We push the limits and reach new heights on track; then refine our products to give you the performance you need when you want it on the road.

Our extensive range of BMW and MINI upgrades offer unrivalled quality, performance and reliability worldwide; furthermore, every product carrying the MMX logo is thoroughly durability tested both on the road and track, so you can have complete peace of mind that you're installing only the best quality products to unlock the true performance potential from your car.

Dinan's 395x34mm 2-piece 6-piston Big Brake Kit (BBK) is an ultra-high-end solution for maximum stopping power. Each feature-packed solution is specifically tailored to your vehicle and provides exceptional stopping-power in a wide operating range from daily driving to professional racing. Because of this, the system provides the correct brake bias and integrates seemlessly with the ABS and stability systems which is critical under emergency braking situations. This upgrade handily out-brakes, out-lasts, and out-performs any non-vehicle application specific OEM swap kits, and rivals much more expensive top-tier systems. Whereas most systems on the market either make heavy sacrifices to either look fancy, cut weight, or cut costs, the Dinan system is designed to simply brake better, last longer, and stand the test of time!

Features:

6-Piston next-generation weight-savings billet calipers with stainless steel pistons

2-Piece 395x34mm semi-floating discs with 72 curved directional cooling vanes

High-performance street pads (Pre-loaded, standard replacement size)

Braided stainless steel brake lines

Billet caliper mounting brackets

All necessary install hardware

Premium components, machining, and QC throughout

Low noise, vibration, and harshness

Maximum Temperature Recording systems for choosing appropriate pads and fluids

Stops quicker, lasts longer, and is more consistent than stock

Dinan's 395x34mm 2-piece 6-piston Big Brake Kit (BBK) is an ultra-high-end solution for maximum stopping power. Each feature-packed solution is specifically tailored to your vehicle and provides exceptional stopping-power in a wide operating range from daily driving to professional racing. Because of this, the system provides the correct brake bias and integrates seemlessly with the ABS and stability systems which is critical under emergency braking situations. This upgrade handily out-brakes, out-lasts, and out-performs any non-vehicle application specific OEM swap kits, and rivals much more expensive top-tier systems. Whereas most systems on the market either make heavy sacrifices to either look fancy, cut weight, or cut costs, the Dinan system is designed to simply brake better, last longer, and stand the test of time!

Features:

6-Piston next-generation weight-savings billet calipers with stainless steel pistons

2-Piece 395x34mm semi-floating discs with 72 curved directional cooling vanes

High-performance street pads (Pre-loaded, standard replacement size)

Braided stainless steel brake lines

Billet caliper mounting brackets

All necessary install hardware

Premium components, machining, and QC throughout

Low noise, vibration, and harshness

Maximum Temperature Recording systems for choosing appropriate pads and fluids

Stops quicker, lasts longer, and is more consistent than stock

Take your front braking to the next level with this exclusive bundle, including Turner Motorsport TrackSport Full-Floating Front Rotors and ECS EP24 “Enthusiast Performance” Brake Pads. Designed for street, weekend, and light-track use, this combo delivers consistent stopping power, reduced fade, and superior pedal feel—without breaking the bank.

TrackSport Full-Floating Front Rotors – 380x30mm

Standard solid rotors perform well on the street, but high-performance driving generates heat that can lead to warping, cracking, and brake fade. Turner Motorsport’s TrackSport Two-Piece Floating Rotors are engineered to handle extreme heat and friction while maintaining consistent braking performance.

Why Two-Piece Floating Rotors?

The friction disc expands independently from the rotor hat, reducing stress and protecting other braking components

Slotted grooves allow gases and brake dust to escape, ensuring smooth, reliable braking under prolonged use

Full-floating design reduces heat transfer and rotor distortion

Features & Benefits:

OE-fitment and easy installation

Heat-treated rotor rings for extended life and reduced wear

Factory-applied coating prevents rust and corrosion

Lightweight design reduces rotational mass for improved handling

Slotted grooves for gas and dust expulsion

Internal vanes enhance cooling and braking efficiency

Kit Includes:

TrackSport Full-Floating Slotted Rotor – Front Right

TrackSport Full-Floating Slotted Rotor – Front Left

ECS EP24 “Enthusiast Performance” Front Brake Pad Set

ECS EP24 “Enthusiast Performance” Brake Pads

Designed for daily-driven BMWs with light track use, the EP24 pads strike the perfect balance between street comfort and aggressive stopping power. Developed through thousands of miles of testing, these pads deliver reliable performance without the downsides of typical race compounds.

Key Features:

Strong stopping power: High coefficient of friction ensures excellent cold bite and even stronger performance when hot

Positive initial bite: Smooth, predictable engagement—no “on/off” switch feel typical of race pads

Reasonable dust: Low-metallic formulation minimizes dust buildup and keeps wheels cleaner than typical high-performance pads

Quiet operation: Streetable noise levels without sacrificing braking efficiency

Long life: Durable compound designed to outlast competitors while being rotor-friendly

Lifetime Replacement Program: Enjoy worry-free ownership with coverage included