BMW Engine Parts for BMW F80 M3 S55 3.0L

OEM Bosch Ignition Coil - N20 N52 N54 N55 S55 S54 N62 S62 M54 ...

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:588121

Part#: 12138616153

In Stock

$ 34.99 USD

Add to Wish List

Qty

$ 34.99 USD

Add to Wish List

Sluggish acceleration, misfires, and rusty terminals are symptoms of a worn coil. Located on the top of your engine, these coils should be inspected and replaced as needed or every 100,000 miles. Keep your ignition system in perfect order. Rubber integrated boot and snap-top cap. OEM Bosch Part Number: 0221504800

Show More Show Less

OEM Bosch Fuel Injector - EU6 Designation - N20/26 N55

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:585581

Part#: 13648625397

In Stock

$ 133.99

This product was last offered at the strikethrough price on
06-22-2026

$ 109.99 USD

Add to Wish List

Qty

$ 109.99 USD

Add to Wish List

Replace your clogged or malfunctioning fuel injector with this Genuine BMW injector to restore proper engine idling and running conditions. Ensure that you need injector with EU6 designation before purchase. This fuel injector will not work with earlier EU5 version fuel rails and injector; non-exchangeable Replaces Genuine BMW part # 13648625397 and requires BMW part # 13537577649 for installation.

Show More Show Less

VTT S55 Crank Bolt Capture - F8X S55 F3x N55

T#:557934

Part#: VTT-S55-CBC

In Stock

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

The S55 suffers from a weak point in its crankshaft. It has been reported that when increasing the power to the engine, the crank hub can move or spin slightly under an extreme load.

OEM Bosch Spark Plug Set - F8X M2 M3 M4 S55 N55

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:583733

Part#: 12120039634KT2

In Stock

$ 55.99 USD

Add to Wish List

Qty

$ 55.99 USD

Add to Wish List

Over time spark plugs become contaminated, worn, and "fouled out". This can cause a weak or missing spark leading to issues with fuel efficiency, misfires, check engine codes, and poor idle or even direct damage to your catalytic converter. This OEM spark plug made by Bosch will restore OE spark plug operation and function, returning lost power and fuel efficiency.

Show More Show Less

BMW Oil Cap Crankcase Breather - All BMW w/2 prong oil fill cap ...

T#:558084

Part#: VTT-CRANK-BREATH

In Stock

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

VTT is happy to introduce the first and only available plug and play crankcase breather kits for ALL BMW applications that use the two-prong oil tab style oil fill caps. With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay.

Can be used by itself with the stock PCV system to eliminate crankcase pressure, or with any number of PCV setups for the ultimate in crankcase pressure relieve

Made from 6061-T6 Aircraft aluminum anodized black for a long-lasting finish, 4 stainless steel baffles for complete oil control, a PTFE one way check ball, a high-quality filter, and clamp all work together to keep crankcase pressure where it belongs, out of your crankcase.

This breather will fit:
ALL BMW's with the two-prong style oil fill cap including but not limited to N54, N55, S55, S54

NOTE: NOT ALL THE MODELS LISTED HAVE THE SAME HOOD CLEARANCE, WE CANNOT SAY WHICH MODELS WILL HAVE CLEARANCE ISSUES, AND WHICH WILL NOT AS WE HAVE NOT TEST IT ON ALL MODELS. IF YOU ARE ORDERING THE BREATHER FOR ANYTHING OTHER THAN AN N54 TEST CLOSE YOUR HOOD CAREFULLY TO ENSURE CLEARANCE IF IT DOES NOT FIT LET US KNOW, AND WE WILL GET YOU A REFUND ONCE THE BREATHER IS RETURNED.

MODEL LIST OF REPORTED CLEARANCE ISSUES: N55 E/F 3 SERIES

Show More Show Less

OEM Bosch Low Fuel Pressure Sensor - N54 N55 N63 S55 S63 S65 ...

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:399809

Part#: 13537622231

In Stock

$ 56.95 USD

Add to Wish List

Qty

$ 56.95 USD

Add to Wish List

This sensor monitors the pressure of the fuel coming from the high pressure fuel pump, looking for low pressure, to determine if your HPFP is functioning correctly.

Bosch High Pressure Fuel Pressure Sensor

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:591891

Part#: 13537620946

In Stock

$ 101.99

This product was last offered at the strikethrough price on
03-17-2026

$ 57.99 USD

Add to Wish List

Qty

$ 57.99 USD

Add to Wish List

A vital component for high pressure fuel system function

Vargas "Spline Lock" Crank Hub Solution - Includes Crank Bolt Capture...

T#:558795

Part#: VTT-CRANKHUB-1

Ships in 1-2 days

$ 889.99 USD

Add to Wish List

Qty

$ 889.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

OEM INA Deflection Pulley - N55 3.0L, S55 3.0L

We Price Match - Give Us A Call or Chat!

T#:554453

Part#: 11288673720

In Stock

$ 45.99 USD

Add to Wish List

Qty

$ 45.99 USD

Add to Wish List

Pulleys begin to squeak once they are reaching the end of their life span and if not replaced, can seize up and lead to a long host of problems that would leave you stranded on the side of the road.

Vargas N54/55 Billet Crank Seal Guard - BMW N54 N55 3.0L

T#:638889

Part#: VTT-CRANKGUARD

In Stock

Starting at $ 89.99 USD

Add to Wish List

Starting at $ 89.99 USD

Add to Wish List

It is a well-known issue on the BMW N54/55 platforms that your serpentine belt can fail for various reasons. When this happens, there is a high chance of the belt getting sucked behind the front damper pulley and then being pushed past the crank seal into your oil pan. From there it can get sucked into the oil pick up causing total engine failure. Even if you do not lose the engine, it is a COSTLY repair to remove the sub-frame and drop the oil pan to remove the belt. The best way to combat this is to watch for oil leaks and keep up on your maintenance. BUT, even with those preventative measures, pre-mature belt failure can occur. This crank seal guard installs over your front crank seal and will keep the belt from being sucked in if a belt failure does occur. This is a cheap way to ensure you do not end up having to replace your motor from oil starvation due to an ingested belt. Vargas' seal is different from those already on market in two major ways. Firstly, it is not offensively priced. Secondly, it is 100% billet with no welds on the tabs to break, no cheap bent thin steel pieces. 100% Billet 6061-T6 aluminum, anodized black for long-term corrosion resistance. Crank Seal Guard includes: One VTT Billet N54/55 Crank Seal Guard Two extended 12.9 Grade bolts, and two stainless washers We highly recommend you install WITH a crank bolt capture at the same time, as you have to remove the damper anyway. Then you will get the benefit of helping eliminate the dreaded spun crank hub and the crank seal issue

Show More Show Less

OEM Bosch Mass Air Flow Sensor (MAF) -- N20 N26 S55 S63 B38 B46 Z4 ...

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:389744

Part#: 13627602038

In Stock at Vendor

$ 246.99

This product was last offered at the strikethrough price on
07-16-2026

$ 244.99 USD

Add to Wish List

Qty

$ 244.99 USD

Add to Wish List

The mass air flow sensor measures the amount of air flow to tell the computer how much fuel to add to the mixture. If the MAF sensor malfunctions, there could be too much or too little fuel added to the mixture.

Show More Show Less

Spline Lock Crank Hub Solution W/ Complete Package - N55 S55 ...

T#:18733532

Part#: VTT-CRANKHUB-6

Ships in 1 Business Day

$ 986.99

This product was last offered at the strikethrough price on
06-28-2026

$ 939.99 USD

Add to Wish List

Qty

$ 939.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Bosch Flow Matched EV14 Injectors - US CAR Connector (EV6) - 750cc - ...

NOT A DIRECT REPLACEMENT FOR FACTORY INJECTORS - For use with aftermarket port injectio...

T#:36947243

Part#: 501-0028

In Stock

$ 399.99 USD

Add to Wish List

Qty

$ 399.99 USD

Add to Wish List

The Black Market Parts Genuine Bosch Motorsports EV14 fuel injectors featuring USCAR (EV6) connector matched and packaged in a pack of 6 units. Direct plug-in for Motiv Reflex, AIC, and Nexsys Motorsports

Show More Show Less

Oxygen Sensor - Priced Each S55 M3 / M4

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:596888

Part#: 11787848487

In Stock

$ 200.99

This product was last offered at the strikethrough price on
03-16-2026

$ 192.98 USD

Add to Wish List

Qty

$ 192.98 USD

Add to Wish List

Ensure optimal performance in your BMW S55 M3/M4 with the Bosch Oxygen Sensor. This sensor is designed to deliver accurate readings of oxygen levels in the exhaust gases, allowing for precise fuel-air mixture control. Bosch, a trusted name in automotive parts, ensures reliability and durability in their oxygen sensors, making it an ideal choice for BMW enthusiasts.

Ensures accurate readings of oxygen levels
Facilitates precise fuel-air mixture control
Trusted Bosch quality and reliability
Compatible with S55 M3/M4 engines

Show More Show Less

Fuel Pump Cam Follower - BMW/MINI B46 B48 B58

We Price Match - Give Us A Call or Chat!

T#:39768327

Part#: 06H109311B

In Stock

$ 29.99

This product was last offered at the strikethrough price on
06-25-2026

$ 28.95 USD

Add to Wish List

Qty

$ 28.95 USD

Add to Wish List

Oxygen Sensor - Priced Each

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:596889

Part#: 11787848486

In Stock

$ 222.65

This product was last offered at the strikethrough price on
04-16-2026

$ 177.99 USD

Add to Wish List

Qty

$ 177.99 USD

Add to Wish List

VTT Ignition Coil Conversion Kit - S55/N55 To B58 - Multiple Color Op...

T#:22196341

Part#: VTTS55CLCNV

Ships in 10 Business Days

Starting at $ 335.99 USD

Add to Wish List

Starting at $ 335.99 USD

Add to Wish List

VTT is proud to offer its very own Game Changer S55/N55 to B58 Coil conversion kit for the BMW S55/N55 platforms. The 55 series of engines has notoriously had ignition problems with the factory coils, while aftermarket upgrades do exist, they can be bulky. The solution is the BMW B58 ignition coils which are extremely robust and can support well over 1000WHP with no issues. This means a plug-and-play affordable solution that fits like stock, and looks AMAZING doing so! We designed our own 6061-T6 Billet bracket in a plethora of colors including matching shades for every S55/N55 Valve Cover. This means you can mix and match the color of the bracket with coil color, with VC color to truly tailor your engine bay to look exactly how you want it to! The kit comes with the following: 3 – Billet Aluminum Coil Brackets in the color of choice 6 – Plug and play VTT wiring harnesses 6 – Custom VTT stalks to convert the B58 coils to the S55/N55 head (We ensure proper spring length inside the boot for optimal spring-to-plug contact) *NOTE: Flash setting changes may be required when installing the conversion kit to ensure the proper function of the B58 coils with S55/N55 DME. This can be found in almost all flashing software settings such as MHD, Bm3, etc.* **NOTE: THESE BRACKETS FIT STOCK S55 VC, VTT S55 BILLET VC, and MOST N55 made after 2011. If you have an older N55 made before 01/2011. These may not fit. Purchase carefully as items that have been installed or attempted to cannot be returned.**

Show More Show Less

VTT N5X/S55/N2X Billet BMW Oil Filter Housing Cap - Blue - BMW N52 N5...

T#:5122267

Part#: VTTFILTERCAPBLUE

Ships in 7 Business Days

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

VTT is proud to offer a billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap and the need for a special tool for removal, while adding some pop and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. Vargas Turbo designed these caps to complement their N5X Billet Oil caps and N5X Billet Power Steering caps so that all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized

Show More Show Less

Spline N55 S55 Lock Crank Hub Solution W/ Hardware Package

T#:18733531

Part#: VTT-CRANKHUB-5

Ships in 10 Business Days

$ 880.99 USD

Add to Wish List

Qty

$ 880.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

OEM Bosch Universal 4-Wire Oxygen Sensor - Priced Each

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:372884

Part#: 15733

In Stock

$ 82.99

This product was last offered at the strikethrough price on
02-16-2026

$ 74.99 USD

Add to Wish List

Qty

$ 74.99 USD

Add to Wish List

Bosch Universal Oxygen Sensors are perfect for replacing faulty sensors throwing off a check engine lights and causing poor operation and low gas mileage. If you are looking for a cheaper option or are unable to get a hold of the sensor you need, you can reuse part of the original wiring harness to connect this high quality replacement.

Show More Show Less

Bosch Flow Matched EV14 Injectors - US CAR Connector (EV6) - 950cc - ...

NOT A DIRECT REPLACEMENT FOR FACTORY INJECTORS - For use with aftermarket port injectio...

T#:47679242

Part#: 501-0082

In Stock

$ 572.99 USD

Add to Wish List

Qty

$ 572.99 USD

Add to Wish List

The Black Market Parts Genuine Bosch Motorsports EV14 fuel injectors featuring USCAR (EV6) connector matched and packaged in a pack of 6 units. Direct plug-in for Motiv Reflex, AIC, and Nexsys Motorsports

Show More Show Less

Vargas Burnt Titanium Magnetic Oil Drain Plug - M12 X 1.5

T#:51813315

Part#: VTT-TI-DRAIN

Ships in 3 Business Days

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

The VTT Burnt Titanium Magnetic Oil Drain Plug is a critical upgrade for any performance enthusiast looking to maximize engine longevity.

VTT N5X/S55/N2X Billet BMW Oil Filter Housing Cap - Clear - BMW N52 N...

T#:5122266

Part#: VTTFILTERCAPCLR

Ships in 1 Business Day

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

VTT is proud to offer a billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap and the need for a special tool for removal, while adding some pop and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. Vargas Turbo designed these caps to complement their N5X Billet Oil caps and N5X Billet Power Steering caps so that all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized

Show More Show Less

Bosch Flow Matched EV14 Injectors - US CAR Connector (EV6) - 1600cc -...

NOT A DIRECT REPLACEMENT FOR FACTORY INJECTORS - For use with aftermarket port injectio...

T#:43041714

Part#: 501-0114

Ships in 9 Business Days

$ 1,040.99 USD

Add to Wish List

Qty

$ 1,040.99 USD

Add to Wish List

The Black Market Parts Genuine Bosch Motorsports EV14 fuel injectors featuring USCAR (EV6) connector matched and packaged in a pack of 6 units. Direct plug-in for Motiv Reflex, AIC, and Nexsys Motorsports

Show More Show Less

Schrick Performance Camshaft Set - 238/272 - F80 M3, F82/83 M4 S55 ...

T#:637691

Part#: SCHCSSS55238/272

Back Ordered

$ 1,899.99 USD

Add to Wish List

Qty

$ 1,899.99 USD

Add to Wish List

High-performance camshafts are key to increasing the top-end power output of your S55 engine at high boost. 238/272 degree, 10.6mm/10.5mm lift. Perfectly compatible with OE valves, springs, VANOS, Valvetronic etc

Show More Show Less

VTT N5X/S55/N2X Triple Billet Cap Kit - Red - BMW N20/52/54/55 ...

T#:5122280

Part#: TRIPLECAPRED1

Ships in 10 Business Days

$ 209.99 USD

Add to Wish List

Qty

$ 209.99 USD

Add to Wish List

Save 10% by buying all 3 VTT Billet Caps together! VTT is proud to offer their billet replacement for the factory plastic Power Steering Cap, Oil Filter Housing Cap, and Oil Fill Cap. These caps do away with the weak plastic construction while adding some pop and color to your engine bay. These caps retain ALL of the factory provisions to ensure proper fitment and operation. Vargas Turbo designed these caps to complement each other, so all 3 will have the same design and color shades. These caps come in 4 colors – Red, Black, Blue, and Clear anodized.

Show More Show Less

S55 Turbocharger Install Kit

T#:597534

Part#: VTT-S55-INSTL

In Stock

$ 329.99 USD

Add to Wish List

Qty

$ 329.99 USD

Add to Wish List

Vargas Turbo has done it again. They've made it even easier for you to get your car back on the road and running right again with your new turbos. They've put together an install kit containing all the components you need to get your new turbos installed properly and efficiently. This means you can get your car back on the road faster and enjoy your new turbos!

Show More Show Less

VTT N5X/S55/N2X Billet BMW Oil Filter Housing Cap - Black - BMW N52 N...

T#:5122264

Part#: VTTFILTERCAPBLK

Ships in 10 Business Days

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

VTT is proud to offer a billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap and the need for a special tool for removal, while adding some pop and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. Vargas Turbo designed these caps to complement their N5X Billet Oil caps and N5X Billet Power Steering caps so that all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized

Show More Show Less

Bosch - Oxygen Sensor - Priced Each

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:25042571

Part#: 11787848482

In Stock at Vendor

$ 250.99

This product was last offered at the strikethrough price on
04-10-2026

$ 232.99 USD

Add to Wish List

Qty

$ 232.99 USD

Add to Wish List

OE Bosch High-Pressure Pump - F80 M3,F82 M4,F83

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:639122

Part#: 13517847204

In Stock at Vendor

$ 507.99

This product was last offered at the strikethrough price on
05-07-2026

$ 492.99 USD

Add to Wish List

Qty

$ 492.99 USD

Add to Wish List

OE Bosch High-Pressure Pump - This item fits the following BMW Chassis: F80 M3,F82 M4,F83 Fits BMW Engines including: S55

VTT N5X/S55/N2X Triple Billet Cap Kit - Clear - BMW N20/52/54/55 ...

T#:5122281

Part#: TRIPLECAPCLR1

Ships in 10 Business Days

$ 249.99 USD

Add to Wish List

Qty

$ 249.99 USD

Add to Wish List

Save 10% by buying all 3 VTT Billet Caps together! VTT is proud to offer their billet replacement for the factory plastic Power Steering Cap, Oil Filter Housing Cap, and Oil Fill Cap. These caps do away with the weak plastic construction while adding some pop and color to your engine bay. These caps retain ALL of the factory provisions to ensure proper fitment and operation. Vargas Turbo designed these caps to complement each other, so all 3 will have the same design and color shades. These caps come in 4 colors – Red, Black, Blue, and Clear anodized.

Show More Show Less

VTT S55 Red Billet CNC Valve Cover

T#:640082

Part#: VTTS55VLVRED

Ships in 7 Business Days

$ 1,511.99 USD

Add to Wish List

Qty

$ 1,511.99 USD

Add to Wish List

Replace your plastic valve cover with this red anodized billet aluminum from Vargas Turbo Technologies. VTT created these for the S55 owner who wants to add a great look to their engine bay while also getting rid of the stock plastic valve cover which can crack with higher mileage. These will work with the stock PCV hose, or an aftermarket catch can, such as the VTT S55 engine catch can kit.

Show More Show Less

VTT N5X/S55/N2X Triple Billet Cap Kit - Black - BMW N20/52/54/55 ...

T#:5122279

Part#: TRIPLECAPBLK1

Ships in 10 Business Days

$ 220.99 USD

Add to Wish List

Qty

$ 220.99 USD

Add to Wish List

Save 10% by buying all 3 VTT Billet Caps together! VTT is proud to offer their billet replacement for the factory plastic Power Steering Cap, Oil Filter Housing Cap, and Oil Fill Cap. These caps do away with the weak plastic construction while adding some pop and color to your engine bay. These caps retain ALL of the factory provisions to ensure proper fitment and operation. Vargas Turbo designed these caps to complement each other, so all 3 will have the same design and color shades. These caps come in 4 colors – Red, Black, Blue, and Clear anodized.

Show More Show Less

S55 Cold Side J-Pipe Charge Pipe

T#:597645

Part#: VTT-S55-CHARGE-1

Ships in 10 Business Days

$ 167.99 USD

Add to Wish List

Qty

$ 167.99 USD

Add to Wish List

Replace your plastic OEM charge pipe with the aluminum charge pipe from Vargas Turbo Technologies. Once you start turning up the boost on the S55 the stock charge pipe from the intercooler to the throttle body becomes a ticking time bomb until it explodes leaving your stranded. This Charge pipe is made from mandrel bent aluminum with CNC flange, and 1/8' NPT port for methanol injection.

Show More Show Less

S55 Billet Motor Mount Inserts

T#:597677

Part#: VTT-INSERT-2

Ships in 10 Business Days

$ 178.99 USD

Add to Wish List

Qty

$ 178.99 USD

Add to Wish List

Instead of completely replacing the mount, simply make a billet aluminum insert for them. This leaves the feel of the factory mount in place but stiffens them up quite a bit removing unwanted engine movement without rattling your teeth out or emptying your wallet.

Show More Show Less

Autel Autolink AL329

T#:2914116

Part#: AL329

Ships in 1 Business Day

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

OBDII Code Reader

VTT S55 Billet CNC Valve Cover - Black

T#:640081

Part#: VTTS55VLVBLACK

Ships in 10 Business Days

$ 1,511.99 USD

Add to Wish List

Qty

$ 1,511.99 USD

Add to Wish List

Replace your plastic valve cover with this black anodized billet aluminum from Vargas Turbo Technologies. VTT created these for the S55 owner who wants to add a great look to their engine bay while also getting rid of the stock plastic valve cover which can crack with higher mileage. These will work with the stock PCV hose, or an aftermarket catch can, such as the VTT S55 engine catch can kit.

Show More Show Less

VTT N5X/S55/N2X Billet BMW Oil Filter Housing Cap - Red - BMW N52 N54...

T#:5122265

Part#: VTTFILTERCAPRED

In Stock

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

VTT is proud to offer a billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap and the need for a special tool for removal, while adding some pop and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. Vargas Turbo designed these caps to complement their N5X Billet Oil caps and N5X Billet Power Steering caps so that all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized

Show More Show Less

VTT “GCMAX” Turbocharger Upgrade Kit - BMW S55

T#:14816664

Part#: VTT-S55-GC-1-1

Ships in 10 Business Days

$ 5,512.99 USD

Add to Wish List

Qty

$ 5,512.99 USD

Add to Wish List

VTT is hitting the ground running in 2023 with the F8X platforms. We are proud to introduce our “GCMAX” evolution of our insanely popular and record-holding GC Series of S55 turbocharger upgrades. We took what we learned from those, and take these to the next level! We increased all the internal flow channels, optimized AR ratios, maxed out the inlet size at 2.5', and increased the compressor wheel to 67mm. Last but not least, the biggest difference maker! We had to completely retool our turbine housings to take our 54mm G25 series turbine. This wheel absolutely outflows everything on the market and is what we use on our G8X S58 GC+ and F9X M5/8 GC. This wheel is proven to spool faster and flow more than any other wheel in its size range. This is the KEY to making big power while keeping back pressure down. This same wheel combo has seen 1000WHP on the F9X platforms and has more still on top. This setup, also went 9.44@146 in the G80 with a completely stock motor, and drivetrain. If you are looking to take your F8X to the next level whether built motor or stock without breaking the bank, THIS is the ticket. Don’t mess around with overpriced slow spooling twins, or the hassle of going single, ending up with a laggy car, and hacked-up connections. These bolt-on like FACTORY. A plug, and play 1000WHP option! Key Design Elements: All new castings with larger flow channels, AR Ratio changes, and improved Aero over Current GC/GC+ housings 310 Stainless Steel Turbine housing for the ultimate in heat, and corrosion resistance 54mm G25 Spec 9 blade Superalloy Mar-M 246 turbine wheel with the latest aero technology for increased flow while maximizing spool 67mm 9-blade “point-milled” compressor wheels with the latest aero technology to maximize flow while virtually eliminating surge Direct connection to ALL factory lines including oil, water, downpipe, and factory charge pipe Redesigned, and improved internal components including bearing housing oiling, and an upgraded thrust bearing NO CORE CHARGES. The new unit is sold to you outright. Keep your old unit in case you ever want to go back to stock. Or sell it to recoup your investment -it’s up to you! No long lead times; once fully released production units will be on the shelf for same to next-day shipping (please inquire about stock levels when ordering) Full 12-month unlimited mileage/No Hassle Warranty. If you have an issue we will replace the unit no questions asked Turbocharger Purchase includes: 1 – VTT set “GCMAX” turbochargers 1- VTT set of “GCMAX” Silicone intakes As with any turbocharger upgrade it should be coupled with complimenting upgrades such as fuel system upgrades, intake, downpipe, intercooler, tune, etc. While you will see gains going from stock turbo to a GCMAX with no other changes, to realize the full potential of the upgrade other parts/tune must be added.

Show More Show Less

Spline Lock Crank Hub Solution

T#:8061334

Part#: VTT-N55-CRANKHUB

Ships in 10 Business Days

$ 818.99 USD

Add to Wish List

Qty

$ 818.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. The product comes with a 1-year unlimited mileage warranty from manufacturer defects.

Show More Show Less

Vargas S55 "GC" Turbo Upgrade - F8X S55 3.0L

T#:638924

Part#: VTTS55GC

Ships in 10 Business Days

Starting at $ 4,052.99 USD

Add to Wish List

Starting at $ 4,052.99 USD

Add to Wish List

VTT S55 GC Turbochargers. GC stands for “Game Changers” and that is exactly what these do! They bring a fully new casting Stainless Steel turbine manifold/housing, all new compressor housing with single-piece high flow inlet, as well as Vargas' tried, and true V2 GC CHRA with a Mar-M246 GTX28 profile turbine wheel, and custom compressor wheel. These turbos have NO core charges, keep your stock turbos, sell them, hold them if you want to go back to stock, etc. The turbos will come with custom VTT silicone inlet hoses to mate up with all inlets on the market making them 100% plug, and play. There is no better, more powerful, or well thought out upgrade on the market at any price point! WHP Level supported (with proper fuel, upgrades, and tuning): 800WHP S55 GC turbocharger Features: Mar-M246: Every set of GC Turbochargers comes with a Mar-M26 Superalloy turbine wheel for unmatched durability Upgraded thrust: Every set of stage GC turbos comes with a performance upgraded thrust to extend the life of the turbochargers. Billet Compressor wheels: Billet compressor wheels are used to maximize flow per shaft revolution GC+ Compressor option available 15-20% flow increase over Standard Billet GC Wheel The turbine housing is cast from 316 Stainless Steel We also suggest picking up the Turbo Installation Kit. This kit includes: 2 – Exhaust manifold gaskets 20 – Exhaust manifold nuts 2 – Oil Drain Gaskets 2 – Oil drain O-rings 4 – Oil Feed O-rings 6 – Coolant connection O-rings 2 – Turbo to downpipe gaskets 2 – Downpipe to Exhaust gaskets

Show More Show Less

VTT Turbocharger Inlet Flange - Garrett G40/42/45 V-Band - 86mm ID ...

T#:52270240

Part#: GARROUTT4G4045

Ships in 10 Business Days

$ 37.99 USD

Add to Wish List

Qty

$ 37.99 USD

Add to Wish List

Upgrade your turbocharger exhaust connection with the VTT-FAB 86mm V-Band Outlet Flange, designed for the Garrett G40-G45 frame sizes.

Bosch Remanufactured Starter Motor - BMW N55 S55 3.0L

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:40004862

Part#: SR9521XKT

In Stock at Vendor

$ 465.99

This product was last offered at the strikethrough price on
05-07-2026

$ 454.99 USD

Add to Wish List

Qty

$ 454.99 USD

Add to Wish List

The advertised price includes a refundable $78 core charge If your car won't turn over, there is a good chance your starter is shot. Bosch's OEM starter is a high quality replacement that will give you peace of mind thanks to its long life-span. Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products. As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less

VTT N5X/S55/N2X Triple Billet Cap Kit - Blue - BMW N20/52/54/55 ...

T#:5122282

Part#: TRIPLECAPBLUE1

In Stock

$ 251.99 USD

Add to Wish List

Qty

$ 251.99 USD

Add to Wish List

Save 10% by buying all 3 VTT Billet Caps together! VTT is proud to offer their billet replacement for the factory plastic Power Steering Cap, Oil Filter Housing Cap, and Oil Fill Cap. These caps do away with the weak plastic construction while adding some pop and color to your engine bay. These caps retain ALL of the factory provisions to ensure proper fitment and operation. Vargas Turbo designed these caps to complement each other, so all 3 will have the same design and color shades. These caps come in 4 colors – Red, Black, Blue, and Clear anodized.

Show More Show Less