BMW Intake Parts for BMW F80 M3 S55 3.0L

Clear BMW chassis

Please ensure your correct model is selected

One thing drivers and cars have in common is the need for air. Induction systems provide a third of the critical necessities for engines to run, so giving your BMW the best way to breathe is paramount in engine performance. If you need to replace your filter, recharge your reusable pod filter, or upgrade your intake, turbos, or intercooler parts, everything can be found below. We have OEM replacements as well as aftermarket performance upgrades to keep your BMW pristine, powerful, and functioning at peak efficiency.

Sub-Categories

Sort By:
Injen Aluminum Int. Charge Pipe Wrinkle Red - F8X M3/M4
Injen Aluminum Int. Charge Pipe Wrinkle Red - F8X M3/M4
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Injen - Corporate Logo
T#:558072
Part#: SES1116ICPWR
In Stock at Vendor
$ 728.99 USD
Add to Wish List
$ 728.99 USD
Add to Wish List
By changing from factory plastic charge piping to hard aluminum charge piping, reliability is greatly increased. Additionally, the engine is allowed to hold higher and more stable boost levels since the piping does not flex or distort. Increased strength at connection points is also assured as heavy duty clamps with hard piping doesn't rattle loose or loose clamping force due to spirited driving. Injen Intercooler Piping Kits are the new standard on high-performance turbocharged vehicles. Utilizing T6 60601 Aluminum you can be sure your turbocharged motor will be breathing the coolest and most consistent air. Bolt-on kits include all necessary hoses and couples for easy installation!
Show More Show Less
Injen Evolution Intake F80, F82, F83, F87 - S55
Injen Evolution Intake F80, F82, F83, F87 - S55
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Injen - Corporate Logo
T#:5802148
Part#: EVO1102
In Stock
$ 810.99

This product was last offered at the strikethrough price on
05-15-2026

$ 716.99 USD
Limited Qty Sale
Add to Wish List
$ 810.99

This product was last offered at the strikethrough price on
05-15-2026

$ 716.99 USD
Limited Qty Sale
Add to Wish List
Injen is proud to be introducing the all new Evolution sealed cold air intake system for the 2015-2018 BMW M3/M4! This intake has been designed using the some of the most up-to-date engineering tools and techniques to produce a top notch kit. This intake system is on a whole new level with one-piece sealed housings that utilize the all new Injen Twist-lock System (Patent Pending) to securely attach the Injen SuperNano-Web Dry air filters in place. This cold air intake also has our distinctive sight window that not only allows easy inspection of the air filters, but it really pops under your hood too. This kit ships complete with premium hardware to provide you the absolute best intake kit available for your BMW M3 and M4. Features: Dyno Proven gains of up to 22 hp and 27 lb-ft. of torque Designed to work with the stock calibration Aggressive intake growl under acceleration Durable Roto-Molded Polyethylene tubes and housings Twist-Lock Technology* to securely integrate the air filter to the housing Reinforced automotive grade silicone couplers Fully serviceable Injen SuperNano-Web dry air filter Replacement air filter # X-1097-BB Stainless steel band clamps with inner protective liner Aggressive under hood appearance while maintaining an OE fit Injen clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances under hood appearances. Made in Pomona California, USA Injen Technology Limited Lifetime Warranty
Show More Show Less
AEM V3 Universal Water/Methanol Injection Kit (30-3300)
AEM V3 Universal Water/Methanol Injection Kit (30-3300)
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
AEM Electronics - Corporate Logo
T#:369781
Part#: 30-3000
Ships in 9 Business Days
11% off MSRP $ 674.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 599.95 USD
Free Shipping
Add to Wish List
11% off MSRP
$ 674.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 599.95 USD
Free Shipping
Add to Wish List
Increase the power of your vehicle by utilizing a water/meth injection kit. The purpose of water/meth injection is to reduce combustion temperatures and allow you to run higher boost pressures on pump gas. When using meth injection, pump gas will resist detonation much better because the methanol essentially raises the octane rating of the fuel and will allow you to run much more aggressive street tuning. This AEM kit has more features and components than any other comparably priced injection kits on the market. 1 Gallon tank with built in low level switch Boost referenced progressive controller ?Boost Safe? readiness safety system Check valve integrated into nozzle to prevent unintended fluid flow One injector and two nozzles to cover a wide range of HP levels High Pressure 200psi Recirculation-style pump Progressive Controller: Start Injection Boost 1-11psi. Full Injection Boost 6-39psi LED dash light for system status and low fluid warning 20 ft. of injection tubing
Show More Show Less
AEM V3 Water/Methanol Injector Kit (Qty 2)
AEM V3 Water/Methanol Injector Kit (Qty 2)
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
AEM Electronics - Corporate Logo
T#:20815166
Part#: 30-3313
In Stock
12% off MSRP $ 129.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 114.99 USD
Free Shipping
Add to Wish List
12% off MSRP
$ 129.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 114.99 USD
Free Shipping
Add to Wish List
AEM Electronics water/methanol injection nozzles are available in different jet sizes that allow you to select the appropriate jet for your power level. The nozzles are serviceable and can be disassembled for cleaning. Includes interchangeable swirl generators for 250 500 or 1000cc configurations.
Show More Show Less
V2 Water/Methanol Standard Controller - Internal MAP W/35PSI Max
V2 Water/Methanol Standard Controller - Internal MAP W/35PSI Max ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
AEM Electronics - Corporate Logo
T#:590418
Part#: 30-3304
In Stock at Vendor
11% off MSRP $ 247.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 219.99 USD
Free Shipping
Add to Wish List
11% off MSRP
$ 247.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 219.99 USD
Free Shipping
Add to Wish List

Upgrade your BMW or MINI with the V2 Water/Methanol Standard Controller - Internal MAP W/35PSI Max

This advanced controller optimizes the injection of water/methanol, maximizing power output while ensuring engine safety. With its internal MAP sensor and 35PSI maximum pressure capacity, it offers precise control and reliability under various driving conditions. Experience improved horsepower, torque, and fuel economy with this state-of-the-art controller from a trusted brand.

  • Enhances performance and efficiency for BMW and MINI vehicles
  • Maximizes power output while ensuring engine safety
  • Internal MAP sensor for precise control
  • 35PSI maximum pressure capacity for reliability
  • Improves horsepower, torque, and fuel economy
Show More Show Less
AEM Water/Methanol Injection System
AEM Water/Methanol Injection System
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
AEM Electronics - Corporate Logo
T#:20815164
Part#: 30-3326
In Stock
11% off MSRP $ 149.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 132.99 USD
Free Shipping
Add to Wish List
11% off MSRP
$ 149.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 132.99 USD
Free Shipping
Add to Wish List
AEM?s stainless steel Water/Methanol Injection Solenoid (PN 30-3326) eliminates any chance of water/methanol flow into the inlet when the WMI system is not engaged. This affordable water/methanol injection accessory features high flow capability (3,600cc/min) and an impressively low current draw of only 0.75A that does not require the use of an additional relay. The valve body features include 1/8? NPT ports with included push-to-lock ?? hose fittings for easy connection and EPDM seals that stand up to corrosion for years of reliable use. It?s an inexpensive insurance policy to protect your high performance engine regardless of the brand of water/methanol injection system you are using! Features: High flow rating (3600 cc/min @ 150 psi) Low current draw (0.75A @ 13.5V) No additional relay required Standard 1/8?- 27 NPT inlet/outlet with included ?? push-to-lock hose fittings for easy installation Fast response time Tested to 200 PSI Stainless steel enclosure and internals with EPDM seals for corrosion resistance Flying leads simplify connection with user desired connector
Show More Show Less

Select Vehicle

BMW Mini
Clear Vehicle

Category

Brand

Price

$
$

Shipping