BMW Intake Parts for BMW F80 M3 S55 3.0L

Genuine BMW Intake Manifold Profile Gasket Set (Set of 6) - E90 E92 E...

T#:14621

Part#: 11617547242

In Stock

22% off MSRP $ 56.37

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.95 USD

Add to Wish List

Qty

22% off MSRP

$ 56.37

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.95 USD

Add to Wish List

This set of 6 gaskets is to seal the intake manifold to the cylinder head. These are absolutely crucial to prevent vacuum and intake air leaks and lean running conditions. These are also usually replaced when adding the 330 manifold to a 325, 328. Price is for a set of 6 - one for each intake runner. On cars with V8 engines 2 sets are required.

Show More Show Less

Genuine BMW Crank Case Fasteners - N54 3.0L, N52 3.0L, N55 3.0L ...

T#:30544

Part#: 11110392552

In Stock

2% off MSRP $ 42.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 41.99 USD

Add to Wish List

Qty

2% off MSRP

$ 42.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 41.99 USD

Add to Wish List

Genuine BMW Set Of Alu. Screws Crank Case
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N51,N52,N52N,N54,N54T,N55,S55

Show More Show Less

BMW F30 E9X TMAP Sensors & PNP Adapters

T#:583821

Part#: 3.5 BAR TMAP

In Stock

$ 32.99 USD

Add to Wish List

Qty

$ 32.99 USD

Add to Wish List

JB4 3.5 bar plug and play TMAP adapters

Genuine BMW MAP Pressure Sensor - BMW N20 N26 N55 S55 N63 S63 ...

T#:539293

Part#: 13628644432

In Stock

5% off MSRP $ 162.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 154.99 USD

Add to Wish List

Qty

5% off MSRP

$ 162.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 154.99 USD

Add to Wish List

The manifold absolute pressure sensor (MAP sensor) is one of the sensors used in your N55 engine's electronic control system. The manifold absolute pressure sensor provides instantaneous manifold pressure information to the engine's electronic control unit (ECU/DME). The data is used to calculate air density and determine the engine's air mass flow rate, which in turn determines the required fuel metering for optimum combustion, efficiency, and ignition timing. Fits BMW Engines including: N20,N26,N55,N63,N63N,S55,S63N

Show More Show Less

Air Filter - Left - F80 M3, F82 M4, F10 M5, F12 M6

T#:22472

Part#: 13727843284

In Stock

24% off MSRP $ 44.57

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 33.99 USD

Add to Wish List

Qty

24% off MSRP

$ 44.57

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 33.99 USD

Add to Wish List

Replacement air filter for stock airbox. Cylinders 1-4. Note this engine uses 2 filters. We sell the left and right filters individually.

Air Filter - Right - F80 M3, F82 M4, F10 M5, F12 M6

T#:22471

Part#: 13727843283

In Stock

28% off MSRP $ 47.75

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 34.31 USD

Add to Wish List

Qty

28% off MSRP

$ 47.75

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 34.31 USD

Add to Wish List

Replacement air filter for stock airbox. Cylinders 5-8. Note this engine uses 2 filters. We sell the left and right filters individually.

Burger Motorsports 3.5 Bar TMAP Sensor & 32" Extension Harness - N54 ...

T#:28504212

Part#: BMS35TMAP-32

Back Ordered

$ 179.00 USD

Add to Wish List

Qty

$ 179.00 USD

Add to Wish List

Use these plug-and-play adapters to quickly adapt a 3.5 BAR TMAP sensor to your N54/N55 BMW, raising the boost maximum boost range from 20psi factory up to 36psi for the 3.5 bar. For most applications the 3.5 BAR adapter is suggested which requires OEM BMW sensor part number: 13627843531.

Show More Show Less

BMC Performance Air Filter - F06 F10 F12 F80/2 M3 M4 M5 M6

T#:398705

Part#: FB647/20

In Stock at Vendor

$ 207.99 USD

Add to Wish List

Qty

$ 207.99 USD

Add to Wish List

Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.

Show More Show Less

Universal 10AN ORB To 3/8" Barb

T#:31522993

Part#: RAD20-0530

In Stock

$ 37.99 USD

Add to Wish List

Qty

$ 37.99 USD

Add to Wish List

FTP Inlet Pipe Kit - BMW S55

T#:598513

Part#: SG71448

Ships on Sep 29, 2026

$ 330.00 USD

Add to Wish List

Qty

$ 330.00 USD

Add to Wish List

Enhance the performance of your BMW with the S55 Turbo Intake Pipe. Designed to address the limitations of the original pipe, this upgrade is essential for boosting the turbocharger or increasing boost value. By improving airflow into the turbo, this intake pipe enhances turbo response, increases airflow, and reduces turbo lag. Enjoy increased flow and a direct OEM replacement with this 3-ply silicon coupler intake pipe.

Benefits:

Improves turbo response
Increases airflow
Reduces turbo lag
Direct OEM replacement for easy installation

Show More Show Less

Genuine BMW Top Mount intercooler - F80 F82 F83

T#:200344

Part#: 17517846235

Ships in 1 day

Sale - Save 8% $ 900.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 833.27 USD

Add to Wish List

Qty

Sale - Save 8%

$ 900.99

This product was last offered at the strikethrough price on
06-15-2026

$ 833.27 USD

Add to Wish List

Genuine BMW Charge-Air Cooler -
This item fits the following BMW Chassis:
F80 M3,F82 M4,F83

Fits BMW Engines including:
S55

Mishimoto Performance Air-to-Water Intercooler - F8X M2 M3 M4 S55 ...

CARB certified for sale in all 50 states

T#:637355

Part#: MMINT-F80-15

EO#: D-759-13

In Stock

$ 1,770.99

This product was last offered at the strikethrough price on
05-08-2026

$ 1,595.99 USD

Add to Wish List

Qty

$ 1,595.99 USD

Add to Wish List

BMW has a knack for maintaining its stake as the benchmark when it comes to performance luxury vehicles, with the F8X generation being no exception. The S55 that powers the 2015–2020 BMW F8X M3, M4 and M2 Competition is dripping with technology, which includes an air-to-water intercooler as a means of keeping cool. Where BMW’s intercooler design was enough to help bring this generation of mid-sized M’s to their peak, we here at Mishimoto found some weaknesses that we felt obliged to address. We started with the end tanks. The Mishimoto Performance Air-to-Water Intercooler features full, cast aluminum end tanks, TIG-welded to our bar-and-plate core for maximum durability as you increase the boost in your Bimmer. Our end tanks also include internal air diverters on both the inlet and outlet to ensure an even flow of charged air through the core. When it comes to the core, bigger is better, and we were able to expand the size of our core in all dimensions, resulting in a 29% increase in core volume while abstaining from any modifications when it comes to the installation. Our new core also features a unique single-pass internal fin layout for the coolant passage for optimal heat transfer from the charged air to the coolant. With our improvements combined, we saw the Mishimoto 2015–2020 BMW F8X M3 and M4 Performance Intercooler increase flow through the core by 16% and recorded a 12°F drop in intake air temperatures when tested with the Mishimoto Performance Heat Exchanger. We also recorded an average increase of 11 whp and 8 wtq during our testing with peak gains of up to 31 whp and 10 wtq. With the micro-wrinkle black finish and sleek header plate design, the Mishimoto Performance Air-to-Water Intercooler makes the perfect addition to your F8X build and looks right at home in the M’s engine bay. Like all of our products, the Mishimoto 2015–2020 BMW F8X M3, M4, and M2 Competition Performance Air-to-Water Intercooler is backed by the Mishimoto Lifetime Warranty for a lifetime of support for all of your performance needs. Features: Direct fit for the 2015–2020 BMW F8X M3, M4, and M2 Competition 29% increase in core volume 16% increase in flow Average power gains of 11 whp and 8 wtq when combined with Mishimoto Heat Exchanger 12°F drop in intake air temperatures with Mishimoto Heat Exchanger Unique single-pass core design for improved cooling capacity Cast aluminum end tanks with incorporated diverters for maximum flow Bar-and-plate core for maximum cooling efficiency Micro-wrinkle black powder-coated finish for sleek aesthetic in the engine bay Compatible with stock and Mishimoto charge pipes Mishimoto Lifetime Warranty Includes: (1) Performance Intercooler Mounting Hardware Mishimoto Lifetime Warranty WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

Air Channel - F22, F23, F30, F32, F33, F34, F36, F80, F82, F83, F87 ...

T#:174407

Part#: 13717613157

In Stock

Sale - Save 7% $ 101.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 94.99 USD

Limited Qty Sale

Add to Wish List

Qty

Sale - Save 7%

$ 101.99

This product was last offered at the strikethrough price on
06-15-2026

$ 94.99 USD

Limited Qty Sale

Add to Wish List

Genuine BMW Intake Duct -
This item fits the following BMW Chassis:
F22,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N55,S55

Show More Show Less

Genuine BMW F80 M3, F82 M4 Clean Air Pipe, Lower - 13717846272 ...

T#:194764

Part#: 13717846272

In Stock

2% off MSRP $ 136.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 133.99 USD

Add to Wish List

Qty

2% off MSRP

$ 136.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 133.99 USD

Add to Wish List

Genuine BMW Clean Air Pipe, Lower - Zyl. 4-6
This item fits the following BMW Chassis:
F80 M3,F82 M4,F83

Fits BMW Engines including:
S55

Burger Motorsports 2013+ TypeB 4BAR Adapter - F2X F3X N54 N55 S55 ...

T#:599637

Part#: TYPEB4BARADAPTER

Back Ordered

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

Use these plug and play adapters to quickly adapt a 4bar TMAP sensor to your N54/N55/S55 BMW, raising the boost maximum boost range from 20psi factory up to 43psi. For very high boost applications, this 4 BAR adapter can be used which requires Bosch 4 BAR sensor (Part # 281002576). SENSOR NOT INCLUDED, Please see T#587716

Show More Show Less

FTP Motorsport Charge Pipe Kit - V2 - F8X M3/M4/M2 Competition ...

T#:578679

Part#: SG71350

Ships on Sep 29, 2026

$ 470.00 USD

Add to Wish List

Qty

$ 470.00 USD

Add to Wish List

This charge pipe kit from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory charge pipes are made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. This set of pipes will not only allow the engine to hold more boost, but they will outlast the stock indefinitely. Aluminum is also a rigid material, meaning it doesn't deform or flex very easily. What this translates to is increased reliability since an aluminum pipe cant flex and decouple itself as plastic does. One more feature to note is the 1/8"NPT fitting in the throttle body pipe. This can be used as the perfect point for a methanol injector or port injection nozzle. Comes with a threaded plug to seal the port until it is needed. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 1/8" NPT bung with plug

Show More Show Less

Genuine BMW Jet Pump & Lines - F80 F82 F83

T#:198688

Part#: 13907848455

In Stock

4% off MSRP $ 92.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 88.99 USD

Add to Wish List

Qty

4% off MSRP

$ 92.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 88.99 USD

Add to Wish List

Genuine BMW Sucking Jet Pump With Lines -
This item fits the following BMW Chassis:
F80 M3,F82 M4,F83

Fits BMW Engines including:
S55

Genuine BMW Vacuum Hose

T#:37535

Part#: 11747797129

In Stock

Sale - Save 7% $ 42.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.85 USD

Add to Wish List

Qty

Sale - Save 7%

$ 42.00

This product was last offered at the strikethrough price on
06-15-2026

$ 38.85 USD

Add to Wish List

Genuine BMW Vacuum Hose Black - 3,5X2,0

Genuine BMW Vacuum Pump Sprocket - N52 3.0L, N55 3.0L, N54 3.0L ...

T#:34987

Part#: 11417516128

In Stock

3% off MSRP $ 33.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 31.99 USD

Add to Wish List

Qty

3% off MSRP

$ 33.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 31.99 USD

Add to Wish List

Genuine BMW Sprocket
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N51,N52,N52N,N54,N54T,N55,S55

Show More Show Less

BMC Filter Cleaning Kit

T#:590913

Part#: WA250-500

In Stock

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

Mishimoto Performance Intercooler Heat Exchanger - F8X M2 M3 M4 S55 ...

CARB certified for sale in all 50 states

T#:637356

Part#: MMHE-F80-15

EO#: D-759-13

Ships in 3 Business Days

$ 725.99 USD

Add to Wish List

Qty

$ 725.99 USD

Add to Wish List

Improve the cooling capacity for your 2015–2020 BMW M3 or M4 with the Mishimoto Performance Heat Exchanger. Air-to-water intercooling is a means of more efficient heat transfer from the charged air, but it now requires an additional heat exchanger mounted to the front of the vehicle in order to dissipate the transferred heat. The S55 powering the F8X generation of M’s packs quite a punch thanks to the A2W system. While the BMW engineers laid the foundation for dissipating heat from the intercooling system, we still saw some room to improve on their design. We started by eliminating any bits of plastic and promptly replaced the end tanks, including the inlet and outlet ports, with durable aluminum. We kept the dual-pass flow through the core for maximum cooling properties while expanding the core into the available space. Our new design features a 42mm thick core while extending the height by 150 mm, totaling in a 60% increase in core volume and a 180% increase in fin surface area. The end result of our improvements is a 10°F drop in global intercooling temperatures over the stock unit. Size isn’t the only thing that matters with this heat exchanger. Since the heat exchanger sits front and center in the M3 and M4’s cooling stack, it’s susceptible to damage from road debris. To keep your air-to-water system safe, our heat exchanger comes equipped with an optional steel mesh stone guard for an added layer of protection for the fins. We also incorporated a variable fin pitch for the lower 12 rows on the core in order to facilitate cooling to DCT-equipped M's. Finally, our 2015–2020 BMW F8X M3/M4 Performance Heat Exchanger includes the Mishimoto Lifetime Warranty for a worry-free install. Features: Direct fit for the 2015–2020 BMW M3, M4, and M2 Competition 10°F drop in global intercooler coolant temperatures over stock 60% increase in core volume 180% increase in external fin surface area Increases intercooler coolant capacity by 0.6 gallons Full aluminum, TIG-welded construction Dual-pass design for maximum cooling Variable fin-pitch design for improved airflow to DCT cooler Includes optional stone guard for maximum protection against road debris Mishimoto Lifetime Warranty Included: (1) Performance Heat Exchanger (1) Stone Guard (1) Magnetic Drain Plug Mounting Hardware Mishimoto Lifetime Warranty WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

Burger Motorsports High Capacity Intercooler Heat Exchanger - F80 F82...

T#:5788180

Part#: BMS-F-S55HE

Ships on Aug 7, 2026

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

This direct bolt-in intercooler upgrade is a high-quality heavy-duty replacement heat exchanger that dramatically improves turbo/inlet air cooling by providing double the cooling surface area and over three times the fluid volume compared to the factory cooler. The benefits are most noticed during back to back runs at higher boost levels where the factory cooling capacity can be overwhelmed resulting in ignition timing pull and reduced turbo efficiency. Dramatically improves turbo/inlet air cooling Double the cooling surface area of the factory unit No modification install and removal Increases turbo efficiency in extended runs Made in the USA

Show More Show Less

Color Matched Charge Pipe Kit - Yas Marina Blue

T#:7640385

Part#: MMICP-F80-15CYMB

In Stock at Vendor

$ 495.99 USD

Add to Wish List

Qty

$ 495.99 USD

Add to Wish List

Elevate both the performance and aesthetics of your BMW with the Mishimoto 2015+ BMW F8X M3/M4 color-matched charge pipe kit. The air-to-water intercooler is pivotal in maintaining low intake air temperatures (IATs), and the stock charge pipes can be a weak link in the system. When pressure mounts, factory pipes may develop splits at the plastic welds near the turbo or even burst along the seam, resulting in frustrating boost leaks. Crafted with durable, full aluminum construction, the Mishimoto F8X M3/M4 Charge Pipes undergo meticulous TIG-welding to ensure a secure channel for the S55 engine's boost. Engineered with optimal airflow in mind, these charge pipes feature a uniform shape from turbo to intercooler without compromising fitment. With the backing of the Mishimoto Lifetime Warranty, the 2015+ BMW F8X M3/M4 Charge Pipes promise a lifetime of exceptional performance and style enhancement for your vehicle.

Show More Show Less

BMS Performance Intake - Red Filters - F8X M2/M3/M4 S55

T#:16175682

Part#: BMSS55INT

Ships on Aug 7, 2026

$ 349.00 USD

Add to Wish List

Qty

$ 349.00 USD

Add to Wish List

Gain up to 10+whp along with terrific sound High quality S55 intake inspired by the BMS Elite S55 intake. It retains everything that is good about the OEM intake including the cold air ducting and lightweight heat shielding airbox bottom but replaces the top end of the intake with higher flow ducting and quality inverted cone air filters to match. During our dyno testing the Elite BMS S55 Performance Intake performed the same or better than other S55 intakes tested posting gains of up to 10+ horsepower to the wheels at 25psi+ boost levels. Note the OEM S55 air intake flows very well from the factory so gains are mostly present at higher boost levels and higher RPM where airflow requirements are highest. In addition to freeing up some power turbo spool speed was improved, and there is an incredible sound improvement. You'll finally be able to hear your turbo spooling! Installation is easy and fully reversible. Includes BMS proprietary high flow filters that can be cleaned every 15-20k miles using an S&B cleaning kit and will last the life of the car. Our intake temperature testing found no significant difference from the factory intake during both sustained cruise and full throttle operation. Includes new O-RINGS for the MAF sensors to ensure a clean fitment and seal. FEATURES AND BENEFITS Adds up to 10+ Horsepower Dramatic sound improvement Super fast install and removal Improves throttle response Retains OEM airbox base as a heat shield Retains OEM cold air ducting Now available with red or blue filters Looks great under the hood Cleanable and reusable filters Vehicle Fitment 2018-2021 F87 M2 Competition (S55 engine) 2015-2020 F80 M3 2015-2020 F82, F83 M4, GTS

Show More Show Less

Burger Motorsports Performance Intake - F8X M3/M4 S55

Not for sale or use in the state of California.

T#:556787

Part#: BMS-S55-INT

Ships on Aug 7, 2026

$ 479.00 USD

Add to Wish List

Qty

$ 479.00 USD

Add to Wish List

In BMW's with the S55, the intake system is partially limited. The bottom portion is lightweight and great for feeding cold air to the intake, but the top portion is excessively restrictive. Working with some of the original equipment, this intake continues to utilize the bottom portion of OE ducting and heat shielding, but replaces the top with new high flow intake tubes and dual inverted performance cone filters. Extensive testing showed up to a 10+ HP gain to the wheels and allows for quicker turbo spool speed. Plus, this design gives you a great sound improvement, letting you hear both the intake and turbo spooling!

Show More Show Less

Mishimoto Performance Charge Pipe Kit - F8X M2 M3 M4 S55

CARB certified for sale in all 50 states

T#:637358

Part#: MMICP-F80-15

EO#: D-759-13

In Stock at Vendor

$ 479.99 USD

Add to Wish List

Qty

$ 479.99 USD

Add to Wish List

Keep the boost flowing through your BMW with the Mishimoto 2015+ BMW F8X M3/M4 Charge Pipe Kit. The air-to-water intercooler keeping IAT’s low is a system, and the stock charge pipes can be a weak link. Once the pressure is on, it’s not uncommon for the factory pipes to split at the plastic welds by the turbo or completely burst along the seam, leaving you with a frustrating boost leak. The Mishimoto F8X M3/M4 Charge pipes are a durable, full aluminum construction, expertly TIG-welded for a secure channel for the S55’s boost. Our charge pipes are specifically designed to deliver optimal airflow with a more uniform shape from turbo to intercooler without sacrificing fitment. Our charge pipe kit also includes a pair of matte black silicone couplers for a secure and stock styled connection to the air-to-water intercooler. The Mishimoto 2015+ BMW F8X M3/M4 Charge Pipes include the Mishimoto Lifetime Warranty for a worry-free installation. Features: Direct fit for the 2015–2020 BMW M3, M4, and M2 Competition Full aluminum TIG-welded construction for maximum durability Unique cast midsection for perfect fitment between engine and air intake Includes bung for simple integration of methenol injection Designed for optimal airflow Includes matte black silicone couplers for a secure and stock-style connection to the intercooler Mishimoto Lifetime Warranty Included: (2) Charge Pipes (2) Silicone Couplers (4) Worm Gear Clamps Mishimoto Lifetime Warranty WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

Genuine BMW Manifold Absolute Pressure (MAP) Sensor - F8X F9X F85/86 ...

For vehicles with a production date from 07/2018+

T#:599874

Part#: 13628644433

Ships in 1 day

Sale - Save 6% $ 147.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 139.85 USD

Add to Wish List

Qty

Sale - Save 6%

$ 147.99

This product was last offered at the strikethrough price on
06-25-2026

$ 139.85 USD

Add to Wish List

The MAP sensor, or manifold absolute pressure sensor, works with the engine computer to set the fuel curve and give readings to the engine computer. If yours is faulty, it may cause improper running, rich or lean fuel curves, or other general performance issues. Replace yours with this unit to keep your engine running at full potential. For N54 applications, you will need adapter harness T#583821- This TMAP sensor is typically used in high-boost applications for the N54

Show More Show Less

Genuine BMW Fuel System Throttle 13547597871

T#:14929

Part#: 13547597871

Ships in 1 day

6% off MSRP $ 714.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 670.99 USD

Add to Wish List

Qty

6% off MSRP

$ 714.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 670.99 USD

Add to Wish List

Genuine BMW Throttle -
This item fits the following BMW Chassis:
E71,E82,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N55,S55

Show More Show Less

Genuine BMW Mass Air Flow Sensor (MAF)

T#:42664

Part#: 13627602038

Ships in 1 day

22% off MSRP $ 497.76

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 387.97 USD

Add to Wish List

Qty

22% off MSRP

$ 497.76

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 387.97 USD

Add to Wish List

Genuine BMW Hot-Film Air Mass Meter -
This item fits the following BMW Chassis:
E89 Z4,F06,F10,F12,F13,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83,I12 i8

Fits BMW Engines including:
N20,N26,S55,S63N

Show More Show Less

Genuine BMW Intake Manifold - N20 2.0L

T#:43430

Part#: 13717613156

Ships in 1 day

2% off MSRP $ 104.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 102.99 USD

Add to Wish List

Qty

2% off MSRP

$ 104.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 102.99 USD

Add to Wish List

Genuine BMW Intake Manifold, Front -
This item fits the following BMW Chassis:
F22,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N20,N26,S55

Show More Show Less

Macht Schnell Intake Charge Scoop Set (Black) - F8X M3/M4

T#:5886935

Part#: 19.12.11XBLK

Ships in 8 Business Days

$ 125.00 USD

Add to Wish List

Qty

$ 125.00 USD

Add to Wish List

Macht Schnell Intake Charge Scoops assist in air delivery by diverting cold, fresh air through the kidney grilles into the airbox. This allows for a noticeable power gain found at higher speeds especially on vehicles equipped with our High Performance Filters. The scoops are constructed from steel and powdercoated, guaranteed to prevent bending and rusting even after years of use. Priced per pair.

Show More Show Less

Macht Schnell Intake Charge Scoop Set (Yellow) - F8X M3/M4

T#:5886933

Part#: 19.12.11XYEL

Ships in 8 Business Days

$ 125.00 USD

Add to Wish List

Qty

$ 125.00 USD

Add to Wish List

Macht Schnell Intake Charge Scoops assist in air delivery by diverting cold, fresh air through the kidney grilles into the airbox. This allows for a noticeable power gain found at higher speeds especially on vehicles equipped with our High Performance Filters. The scoops are constructed from steel and powdercoated, guaranteed to prevent bending and rusting even after years of use. Priced per pair.

Show More Show Less

Macht Schnell Intake Charge Scoop Set (Red) - F8X M3/M4

T#:4662381

Part#: 19.12.11X

Ships in 8 Business Days

$ 125.00 USD

Add to Wish List

Qty

$ 125.00 USD

Add to Wish List

Macht Schnell Intake Charge Scoops assist in air delivery by diverting cold, fresh air through the kidney grilles into the airbox. This allows for a noticeable power gain found at higher speeds especially on vehicles equipped with our High Performance Filters. The scoops are constructed from steel and powdercoated, guaranteed to prevent bending and rusting even after years of use. Priced per pair.

Show More Show Less

Macht Schnell Intake Charge Scoop Set (Blue) - F8X M3/M4

T#:5886934

Part#: 19.12.11XBLU

Ships in 8 Business Days

$ 125.00 USD

Add to Wish List

Qty

$ 125.00 USD

Add to Wish List

Macht Schnell Intake Charge Scoops assist in air delivery by diverting cold, fresh air through the kidney grilles into the airbox. This allows for a noticeable power gain found at higher speeds especially on vehicles equipped with our High Performance Filters. The scoops are constructed from steel and powdercoated, guaranteed to prevent bending and rusting even after years of use. Priced per pair.

Show More Show Less

FTP M-Power High Flow Air Filter - S55 F8x/S63 F1x

T#:5788173

Part#: GS55S63

Special Order: No Guaranteed ETA

$ 130.00 USD

Add to Wish List

Qty

$ 130.00 USD

Add to Wish List

FTP air filters are made with a durable rubber, with optimum adhesion characteristics to ensure fitment to all shapes of boxes. These air filters are also created without welded joints creating a one piece air filter, increasing durability. Features: Reduced emissions and increased MPG Direct fitment Extends engine life Increased power and airflow

Show More Show Less

Genuine BMW Air Box Bump Stop Mount - 13717542860

T#:399461

Part#: 13717542860

In Stock

Sale - Save 28% $ 6.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 5.00 USD

Add to Wish List

Qty

Sale - Save 28%

$ 6.99

This product was last offered at the strikethrough price on
05-02-2026

$ 5.00 USD

Add to Wish List

This mounts the air box to the inside of the engine bay, preventing it from shaking and/or bouncing�around.

Genuine BMW Bump Stop
This item fits the following BMW Chassis:
E82 1M Coupe,E85 Z4M,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F02,F22,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83,i3

Fits BMW Engines including:
N52,N52N,N54,N54T,N55,S54,S55
�

Show More Show Less

Kayser O-Ring

T#:584199

Part#: 13717568031

In Stock

$ 7.50 USD

Add to Wish List

Qty

$ 7.50 USD

Add to Wish List

Charge pipe to throttle body O Ring

Genuine BMW Vacuum Pump - F80 F82 F83

T#:198663

Part#: 11667847203

Ships in 1 day

6% off MSRP $ 876.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 823.99 USD

Add to Wish List

Qty

6% off MSRP

$ 876.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 823.99 USD

Add to Wish List

Genuine BMW Vacuum Pump -
This item fits the following BMW Chassis:
F80 M3,F82 M4,F83

Fits BMW Engines including:
S55

Mishimoto Silicone Transition Coupler - 3in. To 3.5in. - Black ...

T#:25241773

Part#: MMCP-3035B

In Stock

$ 11.99 USD

Add to Wish List

Qty

$ 11.99 USD

Add to Wish List

This transition coupler is constructed of high-quality heat resistant silicone, making it useful for fitting air intakes, intercooler piping, and more.

Genuine BMW Hose Clamp 07129952104

T#:6533

Part#: 07129952104

In Stock

$ 3.99 USD

Add to Wish List

Qty

$ 3.99 USD

Add to Wish List

GENUINE BMW HOSE CLAMP 07129952104

Genuine BMW Intake Manifold Gasket

T#:36571

Part#: 11617588624

In Stock

13% off MSRP $ 22.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 19.99 USD

Add to Wish List

Qty

13% off MSRP

$ 22.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 19.99 USD

Add to Wish List

Don't let a leaking gasket rob your performance. Replace it with a Genuine BMW gasket and enjoy smooth reliable performance.

Genuine BMW Screw - 11617535850

T#:36510

Part#: 11617535850

In Stock

14% off MSRP $ 18.82

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 16.20 USD

Add to Wish List

Qty

14% off MSRP

$ 18.82

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 16.20 USD

Add to Wish List

Genuine BMW SCREW

Genuine BMW Hex Nut With Plate - 07129905541

T#:28904

Part#: 07129905541

In Stock

$ 1.99 USD

Add to Wish List

Qty

$ 1.99 USD

Add to Wish List

Genuine BMW Hex Nut With Plate
This item fits the following BMW Chassis:
E36 M3,E39 M5,E60 M5,E63 M6,E46 M3,E82 1M Coupe,E85 Z4M,E30,E34,E36,E38,E39,E46,E53 X5 X5,E63,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83,i3

Show More Show Less

Vacuum Hose (3.5x7.5) - 1 Meter

T#:53644191

Part#: 11727545323-1

In Stock

$ 41.99 USD

Add to Wish List

Qty

$ 41.99 USD

Add to Wish List

VRSF Charge Pipe Upgrade Kit

T#:55353627

Part#: 10801050/60KT2

In Stock

$ 439.99 USD

Add to Wish List

Qty

$ 439.99 USD

Add to Wish List

If your brake pedal is starting to feel like a wet sponge and you’re missing that sharp, decisive bite when you drop anchor before a corner, your BMW is trying to tell you something.

Mishimoto Air-to-Water Intercooler Power Pack - Black Sapphire Metall...

T#:51039962

Part#: MMB-F80-PPCBS

Ships in 3 Business Days

$ 2,926.00 USD

Add to Wish List

Qty

$ 2,926.00 USD

Add to Wish List

This Power Pack focuses on reinforcing the structural integrity and fluid dynamics of the S55’s induction system.

Mishimoto Air-to-Water Intercooler Power Pack - Sakhir Orange Metalli...

T#:51039974

Part#: MMB-F80-PPCSO

EO#: D-759-13

Ships in 3 Business Days

$ 2,926.00 USD

Add to Wish List

Qty

$ 2,926.00 USD

Add to Wish List

Eliminates risk of pipe-bursts by upgrading to mandrel-bent aluminum units.

Active Autowerke Cnc Aftercooler Cooling Kit - F8x S55

T#:5886968

Part#: 15-012

Ships in 3 Business Days

$ 2,849.99 USD

Add to Wish List

Qty

$ 2,849.99 USD

Add to Wish List

BMW's S55 motor is a modern marvel but one weak point, which Active identified is the entire cooling system for the intake which comprises the charge pipe, the aftercooler and the heat exchanger (or radiator). Finally there is a S55 aftercooler kit upgrade that is good enough to carry the Active Autowerke brand. Years of success in developing cars for motorsport has allowed Active to leverage its expertise to the top-mount charge air cooler on the F80 M3, F82 M4 and F87 M2 Competition. This aftercooler was made for the S55 and crafted using only high-grade aluminum to outperform the factory aftercooler in all situations from everyday driving to the toughest racing. The factory cooler was built to support a specific power target and environment. Many of you have increased the performance of the S55 which quickly overwhelms the stock cooler leading to heat soak and higher intake air temperatures which triggers the ECU to downgrade the performance until cooler air returns. Active's focus was not on a mass-market aesthetic add-on but a properly engineered improvement over the existing hardware. Active uses a tube-and-fin core designed specifically for the S55 and included turbulators to maximize the cooling efficiency in as small a package as possible. The end tanks are billet machined aluminum, not cast, folded, or bonded and ensure even distribution of the water throughout the internal aftercooler cores. High precision fittings, CNC machining, and TIG welding throughout ensures the highest quality construction to prevent pressure loss, and the lowest weight, in a bolt-on replacement. But Active also didn’t leave the aesthetics by the wayside as we dip the visible top of the aftercooler in a carbon fiber coating giving your installed cooling system a decidedly top market look to match the improved cooling performance. The Active silicone charge pipes for the F80 M3, F82/F83 M4 and the F87 M2 Competition improve the flow over the stock, compressed plastic pipes. The Active Silicone Charge Pipes allow you to maximize power on your F8X by securing all the boost that your S55 is making. These pipes replace the hot-side pipes leaving the turbos and into the top-mount aftercooler. The stock S55 charge pipes are notorious for developing hairline fractures at their plastic seams. These fractures or cracks are unnoticeable to the naked eye, but under boost pressure they open up leaking the desired charged air into the engine bay, and consequently can rob your S55 of it's full power potential. In addition, these leaks can trigger your S55's turbochargers to work harder to hit and maintain target boost pressure, potentially wearing them out sooner. Active uses silicone in this area because it will not contribute to heat soak and it's easier to mold for the correct clearances. Active uses a 5-layer silicone hose with all needed adapters and stainless hose clamps included. It fits perfectly with our CNC’d top-mount cooler.

Show More Show Less