BMW Intake Parts for BMW F80 M3 S55 3.0L

Clear BMW chassis

Please ensure your correct model is selected

One thing drivers and cars have in common is the need for air. Induction systems provide a third of the critical necessities for engines to run, so giving your BMW the best way to breathe is paramount in engine performance. If you need to replace your filter, recharge your reusable pod filter, or upgrade your intake, turbos, or intercooler parts, everything can be found below. We have OEM replacements as well as aftermarket performance upgrades to keep your BMW pristine, powerful, and functioning at peak efficiency.

Sub-Categories

Sort By:

Burger Motorsports - Corporate Logo
T#:583821
Part#: 3.5 BAR TMAP
In Stock
$ 32.99 USD
Free Shipping on orders $49 and up
JB4 3.5 bar plug and play TMAP adapters
ECS - Corporate Logo
T#:5082412
Part#: 012054LA32-DRY
In Stock
Sale - Save 25% $ 131.99

This product was last offered at the strikethrough price on
06-14-2026

$ 98.99 USD
Free Shipping
Sale - Save 25%
$ 131.99

This product was last offered at the strikethrough price on
06-14-2026

$ 98.99 USD
Free Shipping

Upgrade your BMW's air intake system with the Turner Motorsport Exact-Fit High-Flow Dry Air Filter, replacing the factory filter for improved engine performance. This reusable filter ensures proper air intake flow, enhancing power across the band and boosting fuel efficiency. With higher flow than stock paper filters, it's a direct OEM replacement, providing an instant increase in performance.

Key Benefits:

  • Direct replacement for OEM filters.
  • Higher flow than OEM for improved performance.
  • Dry air filter—no oiling required.
  • Reusable, saving money on frequent replacements.
  • Cleaning needed only every 50,000 miles under normal driving conditions.

Choose the Turner Motorsport Exact-Fit High-Flow Dry Air Filter for a cost-effective performance upgrade without compromising on maintenance.

Show More Show Less
ECS - Corporate Logo
T#:47644942
Part#: 003675ECS03-02
In Stock
Sale - Save 25% $ 58.99

This product was last offered at the strikethrough price on
06-14-2026

$ 44.24 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 58.99

This product was last offered at the strikethrough price on
06-14-2026

$ 44.24 USD
Free Shipping on orders $49 and up

Universal High-Flow Air Filter

Give your engine the airflow it deserves with this reusable, high-performance air filter—perfect as a direct replacement for an ECS intake system or as the finishing touch for your custom intake project.
Dimensions: 4.5" Base OD • 6" Filter Height • 3.5" Top OD

Upgrade from your restrictive factory filter to an ECS Tuning High-Flow Dry Air Filter and let your engine breathe freely. Improved intake flow enhances power throughout the rev range while helping maintain efficient fuel economy.

Oiled vs. Dry Filters — Which Is Right for You?

Oiled Filters

Offer slightly higher airflow for maximum performance

Require more frequent cleaning

Must be re-oiled after each cleaning

Long-term reusable design saves money over disposable paper filters

Dry Filters

Provide excellent airflow with minimal maintenance

Easily cleaned with warm, soapy water—no oiling required

Still flow significantly better than OE paper filters

Fully reusable and cost-effective

Both versions deliver superior performance over stock filters while offering the long-term benefit of reusability. Choose the option that best fits your maintenance style and performance goals.

Show More Show Less

Burger Motorsports - Corporate Logo
T#:28504212
Part#: BMS35TMAP-32
Back Ordered
$ 179.00 USD
Free Shipping on orders $49 and up
Use these plug-and-play adapters to quickly adapt a 3.5 BAR TMAP sensor to your N54/N55 BMW, raising the boost maximum boost range from 20psi factory up to 36psi for the 3.5 bar. For most applications the 3.5 BAR adapter is suggested which requires OEM BMW sensor part number: 13627843531.
Show More Show Less

ECS - Corporate Logo
T#:376702
Part#: 003402ECS01A-06
In Stock
Sale - Save 25% $ 30.99

This product was last offered at the strikethrough price on
06-13-2026

$ 23.24 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 30.99

This product was last offered at the strikethrough price on
06-13-2026

$ 23.24 USD
Free Shipping on orders $49 and up

Silicone Coupler - Straight 3" ID (76.20mm) x 3" L

No matter the project, ECS Tuning silicone couplers and elbows offer a high-quality, precision-engineered solution to your needs. Whether you're installing an intercooler, fabricating a custom intake system, or whatever else you can dream up, ECS Tuning has you covered.

  • High-quality silicone construction for durability
  • Precision-engineered design ensures a perfect fit
  • Versatile solution for various automotive projects
  • Enhances performance and reliability
  • Compatible with BMW and other vehicles
Show More Show Less
ECS - Corporate Logo
T#:360488
Part#: 5097T321-8FT-A
In Stock
Sale - Save 25% $ 37.99

This product was last offered at the strikethrough price on
06-13-2026

$ 28.49 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 37.99

This product was last offered at the strikethrough price on
06-13-2026

$ 28.49 USD
Free Shipping on orders $49 and up

Ensure optimal engine performance with the replacement of your vacuum system hoses. The vacuum system plays a crucial role in the engine's functionality, transforming it into an efficient pump that influences air-fuel mixture and combustion. Damaged vacuum hoses can lead to various performance issues, from rough idle to difficulties starting the engine. If you're experiencing these issues, it's time to upgrade to this plastic hose with a 2.3mm inner diameter. The hose is black, arrives in an 8-foot section, and can be easily cut to the desired size for a perfect fit.

Key Features:

  • Engine Optimization: Replacing old hoses ensures the vacuum system operates at peak performance.
  • 2.3mm Inner Diameter: Designed to meet specific engine requirements.
  • Black Color: Blends seamlessly with the engine components.
  • 8-Foot Section: Provides flexibility to cut the hose to the required length.
  • Easy Installation: Upgrade without hassle for improved engine efficiency.

Upgrade your vacuum system with this high-quality plastic hose, addressing performance issues and ensuring your engine runs smoothly.

Show More Show Less

ECS - Corporate Logo
T#:6940390
Part#: 090765ECS09
In Stock
Sale - Save 10% $ 466.99

This product was last offered at the strikethrough price on
06-14-2026

$ 420.29 USD
Free Shipping
Sale - Save 10%
$ 466.99

This product was last offered at the strikethrough price on
06-14-2026

$ 420.29 USD
Free Shipping
BMW's OE turbo inlet pipes leave a lot to be desired thanks to their plastic construction and tight bends. This leads to potential cracking from heat cycle fatigue as well as limited, turbulent airflow. Improve the airflow to your BMW's turbos with this ECS Tuning Turbo Inlet Pipe Upgrade! Featuring full aluminum construction, black powder coating, smooth bends, and all the necessary installation components, this inlet pipe set is a plug-and-play addition to your BMW! Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased air volume 3-Ply Silicon Coupler
Show More Show Less
ECS - Corporate Logo
T#:37723501
Part#: 055023LA01
In Stock
Sale - Save 10% $ 491.99

This product was last offered at the strikethrough price on
06-14-2026

$ 442.79 USD
Free Shipping
Sale - Save 10%
$ 491.99

This product was last offered at the strikethrough price on
06-14-2026

$ 442.79 USD
Free Shipping

The S55's factory intake system is a major bottleneck, muting its aggressive twin-turbocharged soundtrack and restricting performance. Oversized airboxes, restrictive paper filters, and charcoal pre-filters choke airflow, limiting power and induction noise. The result? An underwhelming driving experience that doesn’t do the twin-turbo-six justice.

ECS aims to solve this issue with their Luft-Technik Performance Intake System—engineered to optimize airflow, amplify induction sound, and completely transform your engine bay. By replacing the factory restrictions with a high-flow design, this system unleashes the S55’s true potential, delivering sharper throttle response, enhanced turbo efficiency, and an intoxicating intake note.

At its core, the Luft-Technik intake is comprised of dual aluminum inlet tubes, designed for both strength and function. Constructed from 6061 aluminum and finished in a wrinkle black powder coat, these tubes are built to withstand high engine bay temperatures and extreme conditions. Using advanced CAD modeling, ECS engineers optimized the tubing shape to ensure perfect MAF sensor scaling, maintaining factory AFR (air-to-fuel ratio) for peak reliability and efficiency. The unique ovular profile maximizes clearance around critical engine components while allowing for the largest possible inlet diameter. The crossover tube features standoffs for secure heat exchanger hose mounting and a CNC-machined 6061-T6 billet aluminum MAF flange and vacuum port, ensuring seamless integration with factory connections.

To prevent heat soaking and maintain consistent performance, our intake system incorporates precision-cut aluminum heat shields. Finished in a durable wrinkle black powder coat, the heat shields feature a rubber edge trim that seals against the hood, preventing engine bay heat from infiltrating the air intake tract. This results in lower intake air temperatures (IATs), improved air density, and overall improved performance even under demanding conditions.

Key Features:

Aluminum Inlet Tubes 6061 aluminum construction for durability and heat resistance Wrinkle black powder coat for a sleek, OEM+ finish Optimized ovular shape for maximum clearance and airflow Gradual transitions eliminate sharp bends for smoother intake flow MAF scaling matched to factory specs for precise AFR control CNC-machined 6061-T6 MAF flange and vacuum port for OEM fitment Aluminum Heat Shields One-piece aluminum construction for durability and heat isolation Wrinkle black powder coat for a stealthy appearance and heat resistance Rubber edge molding creates a perfect seal against the hood, blocking hot air Mounts to factory locations for hassle-free installation High-Flow Dual-Cone Air Filters 8-ply cotton gauze construction for superior filtration and flow Bellmouth 3" flange inlet minimizes turbulence and maximizes efficiency Enhanced induction noise for an aggressive turbocharged soundtrack Installation & Support:

Click HERE for a guided installation tutorial!

Show More Show Less

ECS - Corporate Logo
T#:19825269
Part#: 2101
In Stock
Sale - Save 25% $ 33.99

This product was last offered at the strikethrough price on
06-14-2026

$ 25.49 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 33.99

This product was last offered at the strikethrough price on
06-14-2026

$ 25.49 USD
Free Shipping on orders $49 and up

ECS - Corporate Logo
T#:28570863
Part#: 017623ECS08A
In Stock
Sale - Save 25% $ 32.99

This product was last offered at the strikethrough price on
06-14-2026

$ 24.74 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 32.99

This product was last offered at the strikethrough price on
06-14-2026

$ 24.74 USD
Free Shipping on orders $49 and up

For optimal performance, consider the 46.5mm To 61.0mm Silicone Coupler.

Engineered with durability and functionality in mind, this silicone coupler provides a reliable connection for various components in your vehicle's intake or cooling system. Its smooth interior surface promotes efficient airflow, while its flexible and reinforced construction ensures a secure fit and prevents leaks. Enjoy hassle-free installation and enhanced performance with this premium silicone coupler.

  • Durable silicone construction
  • Smooth interior surface for efficient airflow
  • Flexible and reinforced design prevents leaks
  • Secure fit for reliable performance
  • Hassle-free installation
Show More Show Less
ECS - Corporate Logo
T#:382969
Part#: 003402ECS03A-16
In Stock
Sale - Save 25% $ 39.99

This product was last offered at the strikethrough price on
06-13-2026

$ 29.99 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 39.99

This product was last offered at the strikethrough price on
06-13-2026

$ 29.99 USD
Free Shipping on orders $49 and up

Elevate your BMW project with ECS Tuning silicone couplers and elbows, providing a high-quality, precision-engineered solution for various applications. Whether you're installing an intercooler, fabricating a custom intake system, or pursuing other automotive projects, ECS Tuning delivers reliable performance and durability. Trust ECS Tuning to meet your needs and enhance your BMW project.

  • High-quality silicone couplers and elbows for BMW projects
  • Precision-engineered for reliability and performance
  • Versatile solution for intercooler installations, custom intake systems, and more
  • Ensures durability and longevity for your automotive projects
Show More Show Less
Mishimoto - Corporate Logo
T#:637355
Part#: MMINT-F80-15
EO#: D-759-13
In Stock
$ 1,770.99

This product was last offered at the strikethrough price on
05-08-2026

$ 1,595.99 USD
$ 1,595.99 USD
BMW has a knack for maintaining its stake as the benchmark when it comes to performance luxury vehicles, with the F8X generation being no exception. The S55 that powers the 2015–2020 BMW F8X M3, M4 and M2 Competition is dripping with technology, which includes an air-to-water intercooler as a means of keeping cool. Where BMW’s intercooler design was enough to help bring this generation of mid-sized M’s to their peak, we here at Mishimoto found some weaknesses that we felt obliged to address. We started with the end tanks. The Mishimoto Performance Air-to-Water Intercooler features full, cast aluminum end tanks, TIG-welded to our bar-and-plate core for maximum durability as you increase the boost in your Bimmer. Our end tanks also include internal air diverters on both the inlet and outlet to ensure an even flow of charged air through the core. When it comes to the core, bigger is better, and we were able to expand the size of our core in all dimensions, resulting in a 29% increase in core volume while abstaining from any modifications when it comes to the installation. Our new core also features a unique single-pass internal fin layout for the coolant passage for optimal heat transfer from the charged air to the coolant. With our improvements combined, we saw the Mishimoto 2015–2020 BMW F8X M3 and M4 Performance Intercooler increase flow through the core by 16% and recorded a 12°F drop in intake air temperatures when tested with the Mishimoto Performance Heat Exchanger. We also recorded an average increase of 11 whp and 8 wtq during our testing with peak gains of up to 31 whp and 10 wtq. With the micro-wrinkle black finish and sleek header plate design, the Mishimoto Performance Air-to-Water Intercooler makes the perfect addition to your F8X build and looks right at home in the M’s engine bay. Like all of our products, the Mishimoto 2015–2020 BMW F8X M3, M4, and M2 Competition Performance Air-to-Water Intercooler is backed by the Mishimoto Lifetime Warranty for a lifetime of support for all of your performance needs. Features: Direct fit for the 2015–2020 BMW F8X M3, M4, and M2 Competition 29% increase in core volume 16% increase in flow Average power gains of 11 whp and 8 wtq when combined with Mishimoto Heat Exchanger 12°F drop in intake air temperatures with Mishimoto Heat Exchanger Unique single-pass core design for improved cooling capacity Cast aluminum end tanks with incorporated diverters for maximum flow Bar-and-plate core for maximum cooling efficiency Micro-wrinkle black powder-coated finish for sleek aesthetic in the engine bay Compatible with stock and Mishimoto charge pipes Mishimoto Lifetime Warranty Includes: (1) Performance Intercooler Mounting Hardware Mishimoto Lifetime Warranty WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.
Show More Show Less


Burger Motorsports - Corporate Logo
T#:599637
Part#: TYPEB4BARADAPTER
Back Ordered
$ 35.00 USD
Free Shipping on orders $49 and up
Use these plug and play adapters to quickly adapt a 4bar TMAP sensor to your N54/N55/S55 BMW, raising the boost maximum boost range from 20psi factory up to 43psi. For very high boost applications, this 4 BAR adapter can be used which requires Bosch 4 BAR sensor (Part # 281002576). SENSOR NOT INCLUDED, Please see T#587716
Show More Show Less
ECS - Corporate Logo
T#:5082400
Part#: 012054LA32-OIL
In Stock
Sale - Save 20% $ 113.99

This product was last offered at the strikethrough price on
06-14-2026

$ 91.19 USD
Free Shipping
Sale - Save 20%
$ 113.99

This product was last offered at the strikethrough price on
06-14-2026

$ 91.19 USD
Free Shipping

Improve your BMW's engine performance with the ECS Exact-Fit High Flow Oiled Air Filter designed for S63 and S55 engines. By replacing your factory air filter with this high-flow oiled filter, you'll experience enhanced airflow, resulting in better engine breathing, increased power throughout the power band, and improved fuel economy. Unlike stock paper filters, this reusable filter offers higher flow, ensuring an immediate performance boost. Choose between oiled and dry filters, each offering unique benefits. While oiled filters provide better airflow, they require regular maintenance, including oiling after cleaning. On the other hand, dry filters offer easier maintenance without the need for oiling. Both options outperform OE paper filters and are reusable, saving you money in the long run. Key features include direct OEM fitment, higher flow than OEM filters, and reusable design, making it an ideal performance upgrade for your BMW.

Key Features:

  • Direct replacement for the OEM filter
  • Higher flow than OEM
  • Oiled air filter
  • Reusable
  • Only needs cleaning every 50,000 miles under normal highway driving conditions

Be sure to check out the full line of filter cleaning supplies ECS Tuning has to offer!

* For vehicles with MAF sensors, it is important to ensure the oil has adequate time to dry before use and is not over oiled. If the oil gets up on the MAF sensor it can cause damage resulting in a check engine light.

Show More Show Less
ECS - Corporate Logo
T#:376708
Part#: 003402ECS01A-03
In Stock
Sale - Save 25% $ 30.99

This product was last offered at the strikethrough price on
06-13-2026

$ 23.24 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 30.99

This product was last offered at the strikethrough price on
06-13-2026

$ 23.24 USD
Free Shipping on orders $49 and up

Upgrade your BMW or MINI with the BMW & MINI Silicone Coupler - Straight 2.38" (60.33mm). This high-quality silicone coupler is designed to provide a secure and leak-free connection for your vehicle's intake or cooling system. Engineered for durability and flexibility, it ensures optimal performance under various conditions. With its straight design and precise dimensions, this silicone coupler offers easy installation and a perfect fit for your BMW or MINI.

  • Provides a secure and leak-free connection
  • Engineered for durability and flexibility
  • Straight design for easy installation
  • Perfect fit for BMW and MINI vehicles
Show More Show Less

ECS - Corporate Logo
T#:377483
Part#: 003402ECS01A-07
In Stock
Sale - Save 40% $ 39.99

This product was last offered at the strikethrough price on
05-02-2026

$ 23.99 USD
Free Shipping on orders $49 and up
Sale - Save 40%
$ 39.99

This product was last offered at the strikethrough price on
05-02-2026

$ 23.99 USD
Free Shipping on orders $49 and up

ECS Silicone Coupler

Upgrade your BMW with the ECS Silicone Coupler. This straight 3 5/8" ID (92mm) x 3" L coupler is designed to enhance your vehicle's performance and durability. Crafted from high-quality silicone, it ensures long-lasting reliability and superior performance.

  • Enhances vehicle performance
  • Durable construction for long-lasting reliability
  • Specifically designed for BMW vehicles
Show More Show Less

Mishimoto - Corporate Logo
T#:637356
Part#: MMHE-F80-15
EO#: D-759-13
In Stock at Vendor
$ 725.99 USD
Free Shipping
$ 725.99 USD
Free Shipping
Improve the cooling capacity for your 2015–2020 BMW M3 or M4 with the Mishimoto Performance Heat Exchanger. Air-to-water intercooling is a means of more efficient heat transfer from the charged air, but it now requires an additional heat exchanger mounted to the front of the vehicle in order to dissipate the transferred heat. The S55 powering the F8X generation of M’s packs quite a punch thanks to the A2W system. While the BMW engineers laid the foundation for dissipating heat from the intercooling system, we still saw some room to improve on their design. We started by eliminating any bits of plastic and promptly replaced the end tanks, including the inlet and outlet ports, with durable aluminum. We kept the dual-pass flow through the core for maximum cooling properties while expanding the core into the available space. Our new design features a 42mm thick core while extending the height by 150 mm, totaling in a 60% increase in core volume and a 180% increase in fin surface area. The end result of our improvements is a 10°F drop in global intercooling temperatures over the stock unit. Size isn’t the only thing that matters with this heat exchanger. Since the heat exchanger sits front and center in the M3 and M4’s cooling stack, it’s susceptible to damage from road debris. To keep your air-to-water system safe, our heat exchanger comes equipped with an optional steel mesh stone guard for an added layer of protection for the fins. We also incorporated a variable fin pitch for the lower 12 rows on the core in order to facilitate cooling to DCT-equipped M's. Finally, our 2015–2020 BMW F8X M3/M4 Performance Heat Exchanger includes the Mishimoto Lifetime Warranty for a worry-free install. Features: Direct fit for the 2015–2020 BMW M3, M4, and M2 Competition 10°F drop in global intercooler coolant temperatures over stock 60% increase in core volume 180% increase in external fin surface area Increases intercooler coolant capacity by 0.6 gallons Full aluminum, TIG-welded construction Dual-pass design for maximum cooling Variable fin-pitch design for improved airflow to DCT cooler Includes optional stone guard for maximum protection against road debris Mishimoto Lifetime Warranty Included: (1) Performance Heat Exchanger (1) Stone Guard (1) Magnetic Drain Plug Mounting Hardware Mishimoto Lifetime Warranty WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov. ​
Show More Show Less
Burger Motorsports - Corporate Logo
T#:5788180
Part#: BMS-F-S55HE
Ships on Aug 10, 2026
$ 599.00 USD
Free Shipping
$ 599.00 USD
Free Shipping
This direct bolt-in intercooler upgrade is a high-quality heavy-duty replacement heat exchanger that dramatically improves turbo/inlet air cooling by providing double the cooling surface area and over three times the fluid volume compared to the factory cooler. The benefits are most noticed during back to back runs at higher boost levels where the factory cooling capacity can be overwhelmed resulting in ignition timing pull and reduced turbo efficiency. Dramatically improves turbo/inlet air cooling Double the cooling surface area of the factory unit No modification install and removal Increases turbo efficiency in extended runs Made in the USA
Show More Show Less

Burger Motorsports Performance Intake - F8X M3/M4 S55
Not for sale or use in the state of California.
Burger Motorsports - Corporate Logo
T#:556787
Part#: BMS-S55-INT
Ships on Aug 10, 2026
$ 479.00 USD
$ 479.00 USD
In BMW's with the S55, the intake system is partially limited. The bottom portion is lightweight and great for feeding cold air to the intake, but the top portion is excessively restrictive. Working with some of the original equipment, this intake continues to utilize the bottom portion of OE ducting and heat shielding, but replaces the top with new high flow intake tubes and dual inverted performance cone filters. Extensive testing showed up to a 10+ HP gain to the wheels and allows for quicker turbo spool speed. Plus, this design gives you a great sound improvement, letting you hear both the intake and turbo spooling!
Show More Show Less
Mishimoto - Corporate Logo
T#:7640385
Part#: MMICP-F80-15CYMB
In Stock at Vendor
$ 495.99 USD
Free Shipping on orders $49 and up
Elevate both the performance and aesthetics of your BMW with the Mishimoto 2015+ BMW F8X M3/M4 color-matched charge pipe kit. The air-to-water intercooler is pivotal in maintaining low intake air temperatures (IATs), and the stock charge pipes can be a weak link in the system. When pressure mounts, factory pipes may develop splits at the plastic welds near the turbo or even burst along the seam, resulting in frustrating boost leaks. Crafted with durable, full aluminum construction, the Mishimoto F8X M3/M4 Charge Pipes undergo meticulous TIG-welding to ensure a secure channel for the S55 engine's boost. Engineered with optimal airflow in mind, these charge pipes feature a uniform shape from turbo to intercooler without compromising fitment. With the backing of the Mishimoto Lifetime Warranty, the 2015+ BMW F8X M3/M4 Charge Pipes promise a lifetime of exceptional performance and style enhancement for your vehicle.
Show More Show Less

Burger Motorsports - Corporate Logo
T#:16175682
Part#: BMSS55INT
Ships on Aug 10, 2026
$ 349.00 USD
$ 349.00 USD
Gain up to 10+whp along with terrific sound High quality S55 intake inspired by the BMS Elite S55 intake. It retains everything that is good about the OEM intake including the cold air ducting and lightweight heat shielding airbox bottom but replaces the top end of the intake with higher flow ducting and quality inverted cone air filters to match. During our dyno testing the Elite BMS S55 Performance Intake performed the same or better than other S55 intakes tested posting gains of up to 10+ horsepower to the wheels at 25psi+ boost levels. Note the OEM S55 air intake flows very well from the factory so gains are mostly present at higher boost levels and higher RPM where airflow requirements are highest. In addition to freeing up some power turbo spool speed was improved, and there is an incredible sound improvement. You'll finally be able to hear your turbo spooling! Installation is easy and fully reversible. Includes BMS proprietary high flow filters that can be cleaned every 15-20k miles using an S&B cleaning kit and will last the life of the car. Our intake temperature testing found no significant difference from the factory intake during both sustained cruise and full throttle operation. Includes new O-RINGS for the MAF sensors to ensure a clean fitment and seal. FEATURES AND BENEFITS Adds up to 10+ Horsepower Dramatic sound improvement Super fast install and removal Improves throttle response Retains OEM airbox base as a heat shield Retains OEM cold air ducting Now available with red or blue filters Looks great under the hood Cleanable and reusable filters Vehicle Fitment 2018-2021 F87 M2 Competition (S55 engine) 2015-2020 F80 M3 2015-2020 F82, F83 M4, GTS
Show More Show Less

Mishimoto Performance Charge Pipe Kit - F8X M2 M3 M4 S55
CARB certified for sale in all 50 states
Mishimoto - Corporate Logo
T#:637358
Part#: MMICP-F80-15
EO#: D-759-13
In Stock at Vendor
$ 479.99 USD
Free Shipping
$ 479.99 USD
Free Shipping
Keep the boost flowing through your BMW with the Mishimoto 2015+ BMW F8X M3/M4 Charge Pipe Kit. The air-to-water intercooler keeping IAT’s low is a system, and the stock charge pipes can be a weak link. Once the pressure is on, it’s not uncommon for the factory pipes to split at the plastic welds by the turbo or completely burst along the seam, leaving you with a frustrating boost leak. The Mishimoto F8X M3/M4 Charge pipes are a durable, full aluminum construction, expertly TIG-welded for a secure channel for the S55’s boost. Our charge pipes are specifically designed to deliver optimal airflow with a more uniform shape from turbo to intercooler without sacrificing fitment. Our charge pipe kit also includes a pair of matte black silicone couplers for a secure and stock styled connection to the air-to-water intercooler. The Mishimoto 2015+ BMW F8X M3/M4 Charge Pipes include the Mishimoto Lifetime Warranty for a worry-free installation. Features: Direct fit for the 2015–2020 BMW M3, M4, and M2 Competition Full aluminum TIG-welded construction for maximum durability Unique cast midsection for perfect fitment between engine and air intake Includes bung for simple integration of methenol injection Designed for optimal airflow Includes matte black silicone couplers for a secure and stock-style connection to the intercooler Mishimoto Lifetime Warranty Included: (2) Charge Pipes (2) Silicone Couplers (4) Worm Gear Clamps Mishimoto Lifetime Warranty WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.
Show More Show Less
Mishimoto - Corporate Logo
T#:25241773
Part#: MMCP-3035B
In Stock
$ 11.99 USD
Free Shipping on orders $49 and up
This transition coupler is constructed of high-quality heat resistant silicone, making it useful for fitting air intakes, intercooler piping, and more.
Active Autowerke - Corporate Logo
T#:5886968
Part#: 15-012
Ships in 3 Business Days
$ 2,849.99 USD
Free Shipping
$ 2,849.99 USD
Free Shipping
BMW's S55 motor is a modern marvel but one weak point, which Active identified is the entire cooling system for the intake which comprises the charge pipe, the aftercooler and the heat exchanger (or radiator). Finally there is a S55 aftercooler kit upgrade that is good enough to carry the Active Autowerke brand. Years of success in developing cars for motorsport has allowed Active to leverage its expertise to the top-mount charge air cooler on the F80 M3, F82 M4 and F87 M2 Competition. This aftercooler was made for the S55 and crafted using only high-grade aluminum to outperform the factory aftercooler in all situations from everyday driving to the toughest racing. The factory cooler was built to support a specific power target and environment. Many of you have increased the performance of the S55 which quickly overwhelms the stock cooler leading to heat soak and higher intake air temperatures which triggers the ECU to downgrade the performance until cooler air returns. Active's focus was not on a mass-market aesthetic add-on but a properly engineered improvement over the existing hardware. Active uses a tube-and-fin core designed specifically for the S55 and included turbulators to maximize the cooling efficiency in as small a package as possible. The end tanks are billet machined aluminum, not cast, folded, or bonded and ensure even distribution of the water throughout the internal aftercooler cores. High precision fittings, CNC machining, and TIG welding throughout ensures the highest quality construction to prevent pressure loss, and the lowest weight, in a bolt-on replacement. But Active also didn’t leave the aesthetics by the wayside as we dip the visible top of the aftercooler in a carbon fiber coating giving your installed cooling system a decidedly top market look to match the improved cooling performance. The Active silicone charge pipes for the F80 M3, F82/F83 M4 and the F87 M2 Competition improve the flow over the stock, compressed plastic pipes. The Active Silicone Charge Pipes allow you to maximize power on your F8X by securing all the boost that your S55 is making. These pipes replace the hot-side pipes leaving the turbos and into the top-mount aftercooler. The stock S55 charge pipes are notorious for developing hairline fractures at their plastic seams. These fractures or cracks are unnoticeable to the naked eye, but under boost pressure they open up leaking the desired charged air into the engine bay, and consequently can rob your S55 of it's full power potential. In addition, these leaks can trigger your S55's turbochargers to work harder to hit and maintain target boost pressure, potentially wearing them out sooner. Active uses silicone in this area because it will not contribute to heat soak and it's easier to mold for the correct clearances. Active uses a 5-layer silicone hose with all needed adapters and stainless hose clamps included. It fits perfectly with our CNC’d top-mount cooler.
Show More Show Less


Mishimoto - Corporate Logo
T#:51039973
Part#: MMB-F80-PPCMW
Ships in 3 Business Days
New Item
$ 2,926.00 USD
$ 2,926.00 USD
This Power Pack focuses on reinforcing the structural integrity of the S55’s induction system while optimizing air and fluid dynamics.
Mishimoto - Corporate Logo
T#:51039970
Part#: MMB-F80-PPCMG
Ships in 3 Business Days
New Item
$ 2,926.00 USD
$ 2,926.00 USD
This Power Pack focuses on reinforcing the structural integrity of the S55’s induction system while maximizing fluid dynamics.
AUTOTECKNIC - Corporate Logo
T#:21407051
Part#: ATK-BM-0021-CF
Ships in 7 Business Days
$ 180.00 USD
Free Shipping on orders $49 and up
Designed to scoop air straight into the intake providing your engine with more cool air and resulting in better performance, this Autotecknic dry carbon air duct is a no-brainer for your car. Not only does it provide you with better performance, but you also get a subtle but more aggressive look on your M3/M4! Dry carbon fiber's name comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold and then into a sealed autoclave to cure properly. This method creates the least amount of waste and forms a lighter version of carbon than the “wet” method. The autoclave vacuuming process of making dry carbon means fewer pinholes and virtually no air pockets in the carbon. Dry carbon is the highest-quality version of carbon fiber products that are produced.
Show More Show Less

Mishimoto - Corporate Logo
T#:51039961
Part#: MMB-F80-PPCAW
Ships in 3 Business Days
New Item
$ 2,926.00 USD
$ 2,926.00 USD
Reinforces the S55's cooling structure, ensuring adequate airflow and maximizing heat transfer efficiency.

Mishimoto - Corporate Logo
T#:51039977
Part#: MMB-F80-PPCYMB
EO#: D-759-13
Ships in 3 Business Days
New Item
$ 2,926.00 USD
$ 2,926.00 USD
This Power Pack is designed to strengthen the structural integrity of the S55’s induction path while maximizing airflow and fluid dynamics.
Mishimoto - Corporate Logo
T#:51039989
Part#: MMINT-F80-15CSO
EO#: D-759-13
Ships in 3 Business Days
New Item
$ 1,948.00 USD
Free Shipping on orders $49 and up
The Mishimoto Performance Intercooler focuses on streamlining the induction path to reduce turbocharger workload.

Mishimoto - Corporate Logo
T#:51039982
Part#: MMINT-F80-15CAW
EO#: D-759-13
In Stock at Vendor
New Item
$ 1,770.99 USD
Free Shipping on orders $49 and up
Allows for more aggressive ignition timing and more consistent power delivery, making it an essential upgrade for both stock and stage-1 tuned vehicles.
Mishimoto - Corporate Logo
T#:51039962
Part#: MMB-F80-PPCBS
Ships in 3 Business Days
New Item
$ 2,926.00 USD
$ 2,926.00 USD
This Power Pack focuses on reinforcing the structural integrity and fluid dynamics of the S55’s induction system.

Mishimoto - Corporate Logo
T#:51039985
Part#: MMINT-F80-15CLRG
EO#: D-759-13
Ships in 3 Business Days
New Item
$ 1,770.99 USD
$ 1,770.99 USD
The Mishimoto Performance Intercooler focuses on reducing induction tract restriction while improving the mechanical reliability of the cooling system.

Mishimoto - Corporate Logo
T#:51039987
Part#: MMINT-F80-15CMW
EO#: D-759-13
Ships in 3 Business Days
New Item
$ 1,948.00 USD
$ 1,948.00 USD
This intercooler upgrade focuses on maximizing volumetric efficiency by reducing air-side restriction.
Mishimoto - Corporate Logo
T#:51039974
Part#: MMB-F80-PPCSO
EO#: D-759-13
Ships in 3 Business Days
New Item
$ 2,926.00 USD
$ 2,926.00 USD
Eliminates risk of pipe-bursts by upgrading to mandrel-bent aluminum units.
Mishimoto - Corporate Logo
T#:51039986
Part#: MMINT-F80-15CMG
EO#: D-759-13
Ships in 3 Business Days
New Item
$ 1,770.99 USD
$ 1,770.99 USD
The Mishimoto Performance Intercooler focuses on maximizing volumetric efficiency by reducing air-side restriction within the induction system.


Mishimoto - Corporate Logo
T#:51039990
Part#: MMINT-F80-15CYMB
EO#: D-759-13
Ships in 3 Business Days
New Item
$ 1,770.99 USD
$ 1,770.99 USD
The Mishimoto Performance Intercooler focuses on streamlining the air path to reduce work for the turbochargers.
Mishimoto - Corporate Logo
T#:51039969
Part#: MMB-F80-PPCLRG
Ships in 3 Business Days
New Item
$ 2,926.00 USD
$ 2,926.00 USD
This Power Pack focuses on reinforcing the structural integrity of the S55’s induction system while optimizing fluid dynamics.
Mishimoto - Corporate Logo
T#:51039983
Part#: MMINT-F80-15CBS
EO#: D-759-13
Ships in 3 Business Days
New Item
$ 1,770.99 USD
$ 1,770.99 USD
This intercooler kit is a direct-fit solution that requires no modifications to your BMW.

ECS - Corporate Logo
T#:363896
Part#: 003402ECS04A-02
Ships on Sep 8, 2026
Sale - Save 10% $ 9.99

This product was last offered at the strikethrough price on
06-13-2026

$ 8.99 USD
Free Shipping on orders $49 and up
Sale - Save 10%
$ 9.99

This product was last offered at the strikethrough price on
06-13-2026

$ 8.99 USD
Free Shipping on orders $49 and up

3" To 2.5" Silicone Coupler 3" Length

Enhance the performance and durability of your BMW or MINI with the 3" To 2.5" Silicone Coupler 3" Length. This silicone coupler provides a reliable connection between components, ensuring optimal airflow and reducing the risk of leaks. Engineered for durability and heat resistance, it withstands high temperatures and harsh conditions. Upgrade your BMW or MINI with this premium silicone coupler for improved performance.

  • Reliable connection for optimal airflow
  • Reduces the risk of leaks for enhanced performance
  • Engineered for durability and heat resistance
  • Fits both BMW and MINI models
Show More Show Less

Burger Motorsports - Corporate Logo
T#:20815185
Part#: BMSWMITC
Ships in 1 Business Day
$ 59.00 USD
Free Shipping on orders $49 and up
The Burger Motorsports custom billet Water/Methanol Injection (WMI) cap includes an integrated heavy-duty check valve to let much-needed air in and prevent dangerous WMI vapor/fumes and liquid from getting out! Each cap is CNC machined in the USA from a solid block of billet aluminum, engraved with the BMS logo, and anodized blue for protection. Check valve piston must be lightly lubricated if tank shows signs of vacuum. One drop of penetrating oil or motor oil in the top will keep the check valve operational. Features and Benefits Integrated heavy-duty check valve lets air in but not out Specifically designed to prevent evaporation Keeps vapors inside the tank Made from a solid block of billet aluminum Blue anodizing for corrosion protection Exaggerated grips for easy removal Integrated heavy-duty o-ring Made in the USA
Show More Show Less
Burger Motorsports - Corporate Logo
T#:558165
Part#: 1G-MT-CL
In Stock
$ 30.00 USD
Free Shipping on orders $49 and up
The least expensive option available from BMS, this 1 gallon tank is compact and flexible allowing for a wide range of mounting on any flat vertical surface in the trunk. The tank is clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a compression pump feed fitting Made in USA Tank dimensions: L 11" x W 4.5 x H 9"
Show More Show Less

Burger Motorsports - Corporate Logo
T#:20815186
Part#: BMSDDP5800
In Stock
Starting at $ 120.00 USD
Free Shipping on orders $49 and up
Starting at $ 120.00 USD
Free Shipping on orders $49 and up
The Burger Motorsports DDP 5800 water methanol alcohol Injection pump is a heavy-duty pump used in all of our BMS Water Injection kits. 200 psi bypass for smooth and high pressure and 1.3 GPM open flow. Made in the USA. Available with built-in quick connect fittings for 1/4" WMI line or with open 3/8" NPT threads if you plan to use braided lines.
Show More Show Less
Burger Motorsports - Corporate Logo
T#:20946755
Part#: 2G-ULPMT
In Stock
Starting at $ 179.00 USD
Free Shipping on orders $49 and up
Starting at $ 179.00 USD
Free Shipping on orders $49 and up
Integrated pump mount for a super clean install. This tank allows the pump (sold separately) to mount to the bottom of the tank making for a clean and fast installation. It’s universal and will fit a wide variety of trunk applications. The larger capacity means more time between fill ups. Offered in black for a stealth appearance and in clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Compatible with BMS DDP5800 pumps, ES4714512 or ES4714513 Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Pump mounts directly to the tank Compatible with all DDP 5800 pumps Super low profile design Available in clear for visually checking fluid levels Available in black for a stealth appearance Includes 2-way vented black plastic cap 4 mounting holes in the feet of the tank Includes a compression pump feed fitting, 2 90 degree push fittings, 9" of methanol line and pump mounting hardware. Made in the USA Tank dimensions: L 15.5" x W 8" x H 8.25"
Show More Show Less

Burger Motorsports - Corporate Logo
T#:26271799
Part#: WMIK-UNI-12S3
In Stock
$ 810.00 USD
$ 810.00 USD

Upgrade your BMW with the JB4 Universal Water/Methanol Injection (WMI) Kit, a versatile solution designed to enhance both power and reliability. Engineered to seamlessly integrate with a variety of vehicles, this innovative kit offers a universal solution for enthusiasts seeking optimized performance and engine protection.

  • Enhanced Performance: Boost engine power and torque for an exhilarating driving experience.
  • Engine Protection: Safeguard your engine from potential damage with precise injection of water and methanol, reducing temperatures and preventing harmful detonation.
  • Improved Fuel Economy: Promote more efficient combustion, leading to better fuel economy and reduced emissions.
  • Easy Installation: With its universal design, installation is hassle-free, providing a convenient upgrade solution for a wide range of vehicles.
  • Advanced Technology: Equipped with adjustable injection rates and integrated safety mechanisms, ensuring optimal performance and reliability.

Upgrade your BMW's performance with the JB4 Universal Water/Methanol Injection Kit and enjoy the perfect blend of power, efficiency, and engine protection.

Show More Show Less

Burger Motorsports - Corporate Logo
T#:558169
Part#: 3G-STMT-F3XF8X
Ships on Aug 10, 2026
$ 229.00 USD
Free Shipping
$ 229.00 USD
Free Shipping
Neatly hides away in the trunk cavity below the deck lid. The Water/Methanol Injection (WMI) pump mounts directly to the bottom of the tank allowing for a quick, clean, and completely stealthy installation. The bottom of the tank includes a sump and baffle, allowing for consistent performance even as the tank drains. Optional upgraded blue billet water/methanol injection (WMI) with 1-way check valve (ES4714530) Features & Benefits Pump mounts directly to the tank (pump sold separately) Works with all DDP 5800 pumps Super low profile design hides under the deck in the existing trunk cavity Available in clear for visually checking fluid levels Includes 2-way vented black plastic cap Threaded mounting points in the feet of the tank Includes a compression pump feed fitting Made in the USA Tank dimensions: L 26.75" x W 9.75" X H 7.5"
Show More Show Less
Burger Motorsports - Corporate Logo
T#:558163
Part#: BMS-WMI
Ships on Aug 10, 2026
Starting at $ 226.99 USD
Free Shipping on orders $49 and up
Starting at $ 226.99 USD
Free Shipping on orders $49 and up
Looking to make loads of power on pump gas? Enter: water/methanol injection. Regardless if you're tuned for conventional pump gas, E85, or race fuel, use of a properly configured and integrated water/meth system will reduce temperatures, allowing you to make more power than on just conventional fuel alone. Select your engine-specific nozzles (which are standard 1/8" NPT and install in most aftermarket chargepipes), your tank to mount in the trunk, upgraded steel braided lines if you so choose, and some boost juice and you just need a management solution! Optionally, add a BMS FSB for JB4 integration!
Show More Show Less
Burger Motorsports - Corporate Logo
T#:20946761
Part#: 1.25G-UMT-CL
Ships on Aug 10, 2026
$ 69.00 USD
Free Shipping on orders $49 and up
This tank is thicker and stronger than BMS' basic 1-gallon WMI tank. This tank features an easy fill filler nozzle, an anti-starvation reservoir with a pre-threaded bung for the included 90º compression pump feed fitting, a spill-catcher reservoir around the filler cap, a 2-way vented black plastic cap, and is translucent to allow visually checking the fluid level. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 ​Features & Benefits 1.25 Gallon Tank (4.73 Liters) Anti-Starvation Reservoir Easy Fill filler Nozzle Spill-Catcher Reservoir around the filler cap Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a 90º compression pump feed fitting Tank dimensions: L 11" x W 4.5 x H 9"
Show More Show Less


Burger Motorsports - Corporate Logo
T#:21176934
Part#: BMS-WMI-SOL
Ships on Aug 10, 2026
$ 75.00 USD
Free Shipping on orders $49 and up
This solenoid safely stops fluid from flowing into your intake system when WMI is not in use. The solenoid features two 1/8 NPT ports with included compression 1/4 in. hose fittings for a quick leak-free connection. The included filter keeps dirt and debris out of your engine.
Show More Show Less