BMW Intake Parts for BMW F80 M3 S55 3.0L

BMW F30 E9X TMAP Sensors & PNP Adapters

T#:583821

Part#: 3.5 BAR TMAP

In Stock

$ 32.99 USD

Add to Wish List

Qty

$ 32.99 USD

Add to Wish List

JB4 3.5 bar plug and play TMAP adapters

Burger Motorsports 3.5 Bar TMAP Sensor & 32" Extension Harness - N54 ...

T#:28504212

Part#: BMS35TMAP-32

Back Ordered

$ 179.00 USD

Add to Wish List

Qty

$ 179.00 USD

Add to Wish List

Use these plug-and-play adapters to quickly adapt a 3.5 BAR TMAP sensor to your N54/N55 BMW, raising the boost maximum boost range from 20psi factory up to 36psi for the 3.5 bar. For most applications the 3.5 BAR adapter is suggested which requires OEM BMW sensor part number: 13627843531.

Show More Show Less

Eventuri Filter Cleaning Kit

T#:396394

Part#: EVE-FLC

Ships in 3 Business Days

$ 30.00 USD

Add to Wish List

Qty

$ 30.00 USD

Add to Wish List

This filter cleaning kit powers away dirt and contaminants leaving your filter in like-new condition.

BMC Performance Air Filter - F06 F10 F12 F80/2 M3 M4 M5 M6

T#:398705

Part#: FB647/20

In Stock at Vendor

$ 207.99 USD

Add to Wish List

Qty

$ 207.99 USD

Add to Wish List

Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.

Show More Show Less

Universal 10AN ORB To 3/8" Barb

T#:31522993

Part#: RAD20-0530

In Stock

$ 37.99 USD

Add to Wish List

Qty

$ 37.99 USD

Add to Wish List

Eventuri High-Flow Panel Filter Pair - F8X M3/M4

T#:399986

Part#: EVE-F8XM-PF

Ships in 6 Business Days

$ 145.00 USD

Add to Wish List

Qty

$ 145.00 USD

Add to Wish List

This is a high flow replacement filter. It installs the same as your factory filter but allows the same flow through a similar media as all the the intake kits offered by Eventuri.

S55 Carbon Charge Pipe Set from Eventuri - F8X

T#:599358

Part#: EVE-S55-CF-CHG

Ships on Aug 6, 2026

$ 895.00 USD

Add to Wish List

Qty

$ 895.00 USD

Add to Wish List

The Masters at Eventuri have invested months of intensive research, development, and testing to create a beautiful and effective aftermarket chargepipe solution for your S55 powered BMW. Eventuri is the gold standard for carbon fiber performance upgrades, and these chargepipes are no exception. The three main criteria kept in mind during the design of these chargepipes was fitment, flow quality, and strength. The carbon fiber construction allows for complex geometry providing an OE like fit. The flow is increased over stock, sporting a constant diameter throughout the chargepipes. The strength of OEM chargepipes is poor, rendering them prone to failure. The cross-directional carbon weave on the Eventuri pipes are over 2mm thick, providing a reliable strength even with increased boost levels or larger turbos altogether.

Show More Show Less

FTP Inlet Pipe Kit - BMW S55

T#:598513

Part#: SG71448

Ships on Sep 29, 2026

$ 330.00 USD

Add to Wish List

Qty

$ 330.00 USD

Add to Wish List

Enhance the performance of your BMW with the S55 Turbo Intake Pipe. Designed to address the limitations of the original pipe, this upgrade is essential for boosting the turbocharger or increasing boost value. By improving airflow into the turbo, this intake pipe enhances turbo response, increases airflow, and reduces turbo lag. Enjoy increased flow and a direct OEM replacement with this 3-ply silicon coupler intake pipe.

Benefits:

Improves turbo response
Increases airflow
Reduces turbo lag
Direct OEM replacement for easy installation

Show More Show Less

Mishimoto Performance Air-to-Water Intercooler - F8X M2 M3 M4 S55 ...

CARB certified for sale in all 50 states

T#:637355

Part#: MMINT-F80-15

EO#: D-759-13

In Stock

$ 1,770.99

This product was last offered at the strikethrough price on
05-08-2026

$ 1,595.99 USD

Add to Wish List

Qty

$ 1,595.99 USD

Add to Wish List

BMW has a knack for maintaining its stake as the benchmark when it comes to performance luxury vehicles, with the F8X generation being no exception. The S55 that powers the 2015–2020 BMW F8X M3, M4 and M2 Competition is dripping with technology, which includes an air-to-water intercooler as a means of keeping cool. Where BMW’s intercooler design was enough to help bring this generation of mid-sized M’s to their peak, we here at Mishimoto found some weaknesses that we felt obliged to address. We started with the end tanks. The Mishimoto Performance Air-to-Water Intercooler features full, cast aluminum end tanks, TIG-welded to our bar-and-plate core for maximum durability as you increase the boost in your Bimmer. Our end tanks also include internal air diverters on both the inlet and outlet to ensure an even flow of charged air through the core. When it comes to the core, bigger is better, and we were able to expand the size of our core in all dimensions, resulting in a 29% increase in core volume while abstaining from any modifications when it comes to the installation. Our new core also features a unique single-pass internal fin layout for the coolant passage for optimal heat transfer from the charged air to the coolant. With our improvements combined, we saw the Mishimoto 2015–2020 BMW F8X M3 and M4 Performance Intercooler increase flow through the core by 16% and recorded a 12°F drop in intake air temperatures when tested with the Mishimoto Performance Heat Exchanger. We also recorded an average increase of 11 whp and 8 wtq during our testing with peak gains of up to 31 whp and 10 wtq. With the micro-wrinkle black finish and sleek header plate design, the Mishimoto Performance Air-to-Water Intercooler makes the perfect addition to your F8X build and looks right at home in the M’s engine bay. Like all of our products, the Mishimoto 2015–2020 BMW F8X M3, M4, and M2 Competition Performance Air-to-Water Intercooler is backed by the Mishimoto Lifetime Warranty for a lifetime of support for all of your performance needs. Features: Direct fit for the 2015–2020 BMW F8X M3, M4, and M2 Competition 29% increase in core volume 16% increase in flow Average power gains of 11 whp and 8 wtq when combined with Mishimoto Heat Exchanger 12°F drop in intake air temperatures with Mishimoto Heat Exchanger Unique single-pass core design for improved cooling capacity Cast aluminum end tanks with incorporated diverters for maximum flow Bar-and-plate core for maximum cooling efficiency Micro-wrinkle black powder-coated finish for sleek aesthetic in the engine bay Compatible with stock and Mishimoto charge pipes Mishimoto Lifetime Warranty Includes: (1) Performance Intercooler Mounting Hardware Mishimoto Lifetime Warranty WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

Eventuri Black Carbon Fiber Intake Kit V2 - F8X M3/M4

T#:399984

Part#: EVE-F8XM-CF-INT

Ships in 4 Business Days

$ 2,695.00 USD

Add to Wish List

Qty

$ 2,695.00 USD

Add to Wish List

The F8X M3/M4 intake system is one of the most ambitious intake systems to date. Every detail was taken into account to ensure that Eventuri created a flagship intake to set a new benchmark for this platform. From the scoops to the ducts to the intake tubes – they developed a “complete solution” to ensure a smooth inlet track with cold air saturation. With a carbon weave to match the OEM M Performance carbon – this truly is a new benchmark.

Show More Show Less

Burger Motorsports 2013+ TypeB 4BAR Adapter - F2X F3X N54 N55 S55 ...

T#:599637

Part#: TYPEB4BARADAPTER

Back Ordered

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

Use these plug and play adapters to quickly adapt a 4bar TMAP sensor to your N54/N55/S55 BMW, raising the boost maximum boost range from 20psi factory up to 43psi. For very high boost applications, this 4 BAR adapter can be used which requires Bosch 4 BAR sensor (Part # 281002576). SENSOR NOT INCLUDED, Please see T#587716

Show More Show Less

FTP Motorsport Charge Pipe Kit - V2 - F8X M3/M4/M2 Competition ...

T#:578679

Part#: SG71350

Ships on Sep 29, 2026

$ 470.00 USD

Add to Wish List

Qty

$ 470.00 USD

Add to Wish List

This charge pipe kit from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory charge pipes are made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. This set of pipes will not only allow the engine to hold more boost, but they will outlast the stock indefinitely. Aluminum is also a rigid material, meaning it doesn't deform or flex very easily. What this translates to is increased reliability since an aluminum pipe cant flex and decouple itself as plastic does. One more feature to note is the 1/8"NPT fitting in the throttle body pipe. This can be used as the perfect point for a methanol injector or port injection nozzle. Comes with a threaded plug to seal the port until it is needed. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 1/8" NPT bung with plug

Show More Show Less

Forge Motorsport Valve Service Kit

T#:28271173

Part#: FMDV004S

Ships on Aug 14, 2026

$ 23.99 USD

Add to Wish List

Qty

$ 23.99 USD

Add to Wish List

Mishimoto Performance Intercooler Heat Exchanger - F8X M2 M3 M4 S55 ...

CARB certified for sale in all 50 states

T#:637356

Part#: MMHE-F80-15

EO#: D-759-13

In Stock

$ 725.99 USD

Add to Wish List

Qty

$ 725.99 USD

Add to Wish List

Improve the cooling capacity for your 2015–2020 BMW M3 or M4 with the Mishimoto Performance Heat Exchanger. Air-to-water intercooling is a means of more efficient heat transfer from the charged air, but it now requires an additional heat exchanger mounted to the front of the vehicle in order to dissipate the transferred heat. The S55 powering the F8X generation of M’s packs quite a punch thanks to the A2W system. While the BMW engineers laid the foundation for dissipating heat from the intercooling system, we still saw some room to improve on their design. We started by eliminating any bits of plastic and promptly replaced the end tanks, including the inlet and outlet ports, with durable aluminum. We kept the dual-pass flow through the core for maximum cooling properties while expanding the core into the available space. Our new design features a 42mm thick core while extending the height by 150 mm, totaling in a 60% increase in core volume and a 180% increase in fin surface area. The end result of our improvements is a 10°F drop in global intercooling temperatures over the stock unit. Size isn’t the only thing that matters with this heat exchanger. Since the heat exchanger sits front and center in the M3 and M4’s cooling stack, it’s susceptible to damage from road debris. To keep your air-to-water system safe, our heat exchanger comes equipped with an optional steel mesh stone guard for an added layer of protection for the fins. We also incorporated a variable fin pitch for the lower 12 rows on the core in order to facilitate cooling to DCT-equipped M's. Finally, our 2015–2020 BMW F8X M3/M4 Performance Heat Exchanger includes the Mishimoto Lifetime Warranty for a worry-free install. Features: Direct fit for the 2015–2020 BMW M3, M4, and M2 Competition 10°F drop in global intercooler coolant temperatures over stock 60% increase in core volume 180% increase in external fin surface area Increases intercooler coolant capacity by 0.6 gallons Full aluminum, TIG-welded construction Dual-pass design for maximum cooling Variable fin-pitch design for improved airflow to DCT cooler Includes optional stone guard for maximum protection against road debris Mishimoto Lifetime Warranty Included: (1) Performance Heat Exchanger (1) Stone Guard (1) Magnetic Drain Plug Mounting Hardware Mishimoto Lifetime Warranty WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

BMC Filter Cleaning Kit

T#:590913

Part#: WA250-500

In Stock

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

Color Matched Charge Pipe Kit - Yas Marina Blue

T#:7640385

Part#: MMICP-F80-15CYMB

In Stock at Vendor

$ 495.99 USD

Add to Wish List

Qty

$ 495.99 USD

Add to Wish List

Elevate both the performance and aesthetics of your BMW with the Mishimoto 2015+ BMW F8X M3/M4 color-matched charge pipe kit. The air-to-water intercooler is pivotal in maintaining low intake air temperatures (IATs), and the stock charge pipes can be a weak link in the system. When pressure mounts, factory pipes may develop splits at the plastic welds near the turbo or even burst along the seam, resulting in frustrating boost leaks. Crafted with durable, full aluminum construction, the Mishimoto F8X M3/M4 Charge Pipes undergo meticulous TIG-welding to ensure a secure channel for the S55 engine's boost. Engineered with optimal airflow in mind, these charge pipes feature a uniform shape from turbo to intercooler without compromising fitment. With the backing of the Mishimoto Lifetime Warranty, the 2015+ BMW F8X M3/M4 Charge Pipes promise a lifetime of exceptional performance and style enhancement for your vehicle.

Show More Show Less

Mishimoto Performance Charge Pipe Kit - F8X M2 M3 M4 S55

CARB certified for sale in all 50 states

T#:637358

Part#: MMICP-F80-15

EO#: D-759-13

Ships in 2 Business Days

$ 479.99 USD

Add to Wish List

Qty

$ 479.99 USD

Add to Wish List

Keep the boost flowing through your BMW with the Mishimoto 2015+ BMW F8X M3/M4 Charge Pipe Kit. The air-to-water intercooler keeping IAT’s low is a system, and the stock charge pipes can be a weak link. Once the pressure is on, it’s not uncommon for the factory pipes to split at the plastic welds by the turbo or completely burst along the seam, leaving you with a frustrating boost leak. The Mishimoto F8X M3/M4 Charge pipes are a durable, full aluminum construction, expertly TIG-welded for a secure channel for the S55’s boost. Our charge pipes are specifically designed to deliver optimal airflow with a more uniform shape from turbo to intercooler without sacrificing fitment. Our charge pipe kit also includes a pair of matte black silicone couplers for a secure and stock styled connection to the air-to-water intercooler. The Mishimoto 2015+ BMW F8X M3/M4 Charge Pipes include the Mishimoto Lifetime Warranty for a worry-free installation. Features: Direct fit for the 2015–2020 BMW M3, M4, and M2 Competition Full aluminum TIG-welded construction for maximum durability Unique cast midsection for perfect fitment between engine and air intake Includes bung for simple integration of methenol injection Designed for optimal airflow Includes matte black silicone couplers for a secure and stock-style connection to the intercooler Mishimoto Lifetime Warranty Included: (2) Charge Pipes (2) Silicone Couplers (4) Worm Gear Clamps Mishimoto Lifetime Warranty WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

BMS Performance Intake - Red Filters - F8X M2/M3/M4 S55

T#:16175682

Part#: BMSS55INT

Ships on Aug 7, 2026

$ 349.00 USD

Add to Wish List

Qty

$ 349.00 USD

Add to Wish List

Gain up to 10+whp along with terrific sound High quality S55 intake inspired by the BMS Elite S55 intake. It retains everything that is good about the OEM intake including the cold air ducting and lightweight heat shielding airbox bottom but replaces the top end of the intake with higher flow ducting and quality inverted cone air filters to match. During our dyno testing the Elite BMS S55 Performance Intake performed the same or better than other S55 intakes tested posting gains of up to 10+ horsepower to the wheels at 25psi+ boost levels. Note the OEM S55 air intake flows very well from the factory so gains are mostly present at higher boost levels and higher RPM where airflow requirements are highest. In addition to freeing up some power turbo spool speed was improved, and there is an incredible sound improvement. You'll finally be able to hear your turbo spooling! Installation is easy and fully reversible. Includes BMS proprietary high flow filters that can be cleaned every 15-20k miles using an S&B cleaning kit and will last the life of the car. Our intake temperature testing found no significant difference from the factory intake during both sustained cruise and full throttle operation. Includes new O-RINGS for the MAF sensors to ensure a clean fitment and seal. FEATURES AND BENEFITS Adds up to 10+ Horsepower Dramatic sound improvement Super fast install and removal Improves throttle response Retains OEM airbox base as a heat shield Retains OEM cold air ducting Now available with red or blue filters Looks great under the hood Cleanable and reusable filters Vehicle Fitment 2018-2021 F87 M2 Competition (S55 engine) 2015-2020 F80 M3 2015-2020 F82, F83 M4, GTS

Show More Show Less

Burger Motorsports High Capacity Intercooler Heat Exchanger - F80 F82...

T#:5788180

Part#: BMS-F-S55HE

Ships on Aug 7, 2026

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

This direct bolt-in intercooler upgrade is a high-quality heavy-duty replacement heat exchanger that dramatically improves turbo/inlet air cooling by providing double the cooling surface area and over three times the fluid volume compared to the factory cooler. The benefits are most noticed during back to back runs at higher boost levels where the factory cooling capacity can be overwhelmed resulting in ignition timing pull and reduced turbo efficiency. Dramatically improves turbo/inlet air cooling Double the cooling surface area of the factory unit No modification install and removal Increases turbo efficiency in extended runs Made in the USA

Show More Show Less

Burger Motorsports Performance Intake - F8X M3/M4 S55

Not for sale or use in the state of California.

T#:556787

Part#: BMS-S55-INT

Ships on Aug 7, 2026

$ 479.00 USD

Add to Wish List

Qty

$ 479.00 USD

Add to Wish List

In BMW's with the S55, the intake system is partially limited. The bottom portion is lightweight and great for feeding cold air to the intake, but the top portion is excessively restrictive. Working with some of the original equipment, this intake continues to utilize the bottom portion of OE ducting and heat shielding, but replaces the top with new high flow intake tubes and dual inverted performance cone filters. Extensive testing showed up to a 10+ HP gain to the wheels and allows for quicker turbo spool speed. Plus, this design gives you a great sound improvement, letting you hear both the intake and turbo spooling!

Show More Show Less

Macht Schnell Intake Charge Scoop Set (Blue) - F8X M3/M4

T#:5886934

Part#: 19.12.11XBLU

Ships in 9 Business Days

$ 125.00 USD

Add to Wish List

Qty

$ 125.00 USD

Add to Wish List

Macht Schnell Intake Charge Scoops assist in air delivery by diverting cold, fresh air through the kidney grilles into the airbox. This allows for a noticeable power gain found at higher speeds especially on vehicles equipped with our High Performance Filters. The scoops are constructed from steel and powdercoated, guaranteed to prevent bending and rusting even after years of use. Priced per pair.

Show More Show Less

Macht Schnell Intake Charge Scoop Set (Red) - F8X M3/M4

T#:4662381

Part#: 19.12.11X

Ships in 9 Business Days

$ 125.00 USD

Add to Wish List

Qty

$ 125.00 USD

Add to Wish List

Macht Schnell Intake Charge Scoops assist in air delivery by diverting cold, fresh air through the kidney grilles into the airbox. This allows for a noticeable power gain found at higher speeds especially on vehicles equipped with our High Performance Filters. The scoops are constructed from steel and powdercoated, guaranteed to prevent bending and rusting even after years of use. Priced per pair.

Show More Show Less

Macht Schnell Intake Charge Scoop Set (Black) - F8X M3/M4

T#:5886935

Part#: 19.12.11XBLK

Ships in 9 Business Days

$ 125.00 USD

Add to Wish List

Qty

$ 125.00 USD

Add to Wish List

Macht Schnell Intake Charge Scoops assist in air delivery by diverting cold, fresh air through the kidney grilles into the airbox. This allows for a noticeable power gain found at higher speeds especially on vehicles equipped with our High Performance Filters. The scoops are constructed from steel and powdercoated, guaranteed to prevent bending and rusting even after years of use. Priced per pair.

Show More Show Less

Macht Schnell Intake Charge Scoop Set (Yellow) - F8X M3/M4

T#:5886933

Part#: 19.12.11XYEL

Ships in 9 Business Days

$ 125.00 USD

Add to Wish List

Qty

$ 125.00 USD

Add to Wish List

Macht Schnell Intake Charge Scoops assist in air delivery by diverting cold, fresh air through the kidney grilles into the airbox. This allows for a noticeable power gain found at higher speeds especially on vehicles equipped with our High Performance Filters. The scoops are constructed from steel and powdercoated, guaranteed to prevent bending and rusting even after years of use. Priced per pair.

Show More Show Less

FTP M-Power High Flow Air Filter - S55 F8x/S63 F1x

T#:5788173

Part#: GS55S63

Special Order: No Guaranteed ETA

$ 130.00 USD

Add to Wish List

Qty

$ 130.00 USD

Add to Wish List

FTP air filters are made with a durable rubber, with optimum adhesion characteristics to ensure fitment to all shapes of boxes. These air filters are also created without welded joints creating a one piece air filter, increasing durability. Features: Reduced emissions and increased MPG Direct fitment Extends engine life Increased power and airflow

Show More Show Less

Mishimoto Silicone Transition Coupler - 3in. To 3.5in. - Black ...

T#:25241773

Part#: MMCP-3035B

In Stock

$ 11.99 USD

Add to Wish List

Qty

$ 11.99 USD

Add to Wish List

This transition coupler is constructed of high-quality heat resistant silicone, making it useful for fitting air intakes, intercooler piping, and more.

4MM Silicone Vacuum Hose - Red - 9 Feet

T#:370918

Part#: VC04R

Back Ordered

$ 15.99 USD

Add to Wish List

Qty

$ 15.99 USD

Add to Wish List

Enhance Engine Performance with Silicone Vacuum Line

Upgrade your car's vacuum system with the Silicone Vacuum Line, a vital component that significantly impacts engine performance. Engineered to resist heat and contaminants, this silicone hose promises exceptional durability, ensuring prolonged and reliable operation.

Featuring an inner diameter of 4mm and a vibrant red color, this silicone hose arrives in a 9-foot section, offering the flexibility to customize lengths as needed. Damaged vacuum hoses can lead to various performance issues, from rough idling to engine starting problems. Promptly replace worn-out hoses to optimize your vehicle's overall performance.

Show More Show Less

Mishimoto Air-to-Water Intercooler Power Pack - Mineral Gray Metallic...

T#:51039970

Part#: MMB-F80-PPCMG

Ships in 4 Business Days

$ 2,926.00 USD

Add to Wish List

Qty

$ 2,926.00 USD

Add to Wish List

This Power Pack focuses on reinforcing the structural integrity of the S55’s induction system while maximizing fluid dynamics.

Mishimoto Air-to-Water Intercooler Power Pack - Alpine White III - BM...

T#:51039961

Part#: MMB-F80-PPCAW

Ships in 4 Business Days

$ 2,926.00 USD

Add to Wish List

Qty

$ 2,926.00 USD

Add to Wish List

Reinforces the S55's cooling structure, ensuring adequate airflow and maximizing heat transfer efficiency.

Mishimoto Air-to-Water Intercooler Power Pack - Yas Marina Blue Metal...

T#:51039977

Part#: MMB-F80-PPCYMB

EO#: D-759-13

Ships in 4 Business Days

$ 2,926.00 USD

Add to Wish List

Qty

$ 2,926.00 USD

Add to Wish List

This Power Pack is designed to strengthen the structural integrity of the S55’s induction path while maximizing airflow and fluid dynamics.

Mishimoto Air-to-Water Intercooler Power Pack - Sakhir Orange Metalli...

T#:51039974

Part#: MMB-F80-PPCSO

EO#: D-759-13

Ships in 4 Business Days

$ 2,926.00 USD

Add to Wish List

Qty

$ 2,926.00 USD

Add to Wish List

Eliminates risk of pipe-bursts by upgrading to mandrel-bent aluminum units.

Mishimoto Air-to-Water Intercooler Power Pack - Black Sapphire Metall...

T#:51039962

Part#: MMB-F80-PPCBS

Ships in 4 Business Days

$ 2,926.00 USD

Add to Wish List

Qty

$ 2,926.00 USD

Add to Wish List

This Power Pack focuses on reinforcing the structural integrity and fluid dynamics of the S55’s induction system.

Mishimoto Performance Air-to-Water Intercooler - Alpine White - BMW F...

T#:51039982

Part#: MMINT-F80-15CAW

EO#: D-759-13

In Stock at Vendor

$ 1,770.99 USD

Add to Wish List

Qty

$ 1,770.99 USD

Add to Wish List

Allows for more aggressive ignition timing and more consistent power delivery, making it an essential upgrade for both stock and stage-1 tuned vehicles.

Mishimoto Performance Air-to-Water Intercooler - Sakhir Orange Metall...

T#:51039989

Part#: MMINT-F80-15CSO

EO#: D-759-13

Ships in 4 Business Days

$ 1,948.00 USD

Add to Wish List

Qty

$ 1,948.00 USD

Add to Wish List

The Mishimoto Performance Intercooler focuses on streamlining the induction path to reduce turbocharger workload.

Mishimoto Performance Air-to-Water Intercooler - Lime Rock Gray Metal...

T#:51039985

Part#: MMINT-F80-15CLRG

EO#: D-759-13

Ships in 4 Business Days

$ 1,770.99 USD

Add to Wish List

Qty

$ 1,770.99 USD

Add to Wish List

The Mishimoto Performance Intercooler focuses on reducing induction tract restriction while improving the mechanical reliability of the cooling system.

AMS Performance BMW M3/M4/M2C S55 Charge Pipes (F80/F82/F83/F87) ...

T#:39295563

Part#: AMS.39.09.0001-1

Ships in 3 Business Days

$ 674.95 USD

Add to Wish List

Qty

$ 674.95 USD

Add to Wish List

Mishimoto Air-to-Water Intercooler Power Pack - Mineral White Metalli...

T#:51039973

Part#: MMB-F80-PPCMW

Ships in 4 Business Days

$ 2,926.00 USD

Add to Wish List

Qty

$ 2,926.00 USD

Add to Wish List

This Power Pack focuses on reinforcing the structural integrity of the S55’s induction system while optimizing air and fluid dynamics.

Mishimoto Performance Air-to-Water Intercooler, Mineral White Metalli...

T#:51039987

Part#: MMINT-F80-15CMW

EO#: D-759-13

Ships in 4 Business Days

$ 1,948.00 USD

Add to Wish List

Qty

$ 1,948.00 USD

Add to Wish List

This intercooler upgrade focuses on maximizing volumetric efficiency by reducing air-side restriction.

Eventuri BMW F8X M3 / M4 Black Carbon Intake System - V2

T#:46719178

Part#: EVE-F8XMV2-CF-IN

Ships in 2 Business Days

$ 2,695.00 USD

Add to Wish List

Qty

$ 2,695.00 USD

Add to Wish List

Mishimoto Air-to-Water Intercooler Power Pack - Lime Rock Gray Metall...

T#:51039969

Part#: MMB-F80-PPCLRG

Ships in 4 Business Days

$ 2,926.00 USD

Add to Wish List

Qty

$ 2,926.00 USD

Add to Wish List

This Power Pack focuses on reinforcing the structural integrity of the S55’s induction system while optimizing fluid dynamics.

Mishimoto Performance Air-to-Water Intercooler - Yas Marina Blue Meta...

T#:51039990

Part#: MMINT-F80-15CYMB

EO#: D-759-13

Ships in 4 Business Days

$ 1,770.99 USD

Add to Wish List

Qty

$ 1,770.99 USD

Add to Wish List

The Mishimoto Performance Intercooler focuses on streamlining the air path to reduce work for the turbochargers.

Mishimoto Performance Air-to-Water Intercooler, Mineral Gray Metallic...

T#:51039986

Part#: MMINT-F80-15CMG

EO#: D-759-13

Ships in 4 Business Days

$ 1,770.99 USD

Add to Wish List

Qty

$ 1,770.99 USD

Add to Wish List

The Mishimoto Performance Intercooler focuses on maximizing volumetric efficiency by reducing air-side restriction within the induction system.

Mishimoto Performance Air-to-Water Intercooler, Black Sapphire Metall...

T#:51039983

Part#: MMINT-F80-15CBS

EO#: D-759-13

Ships in 4 Business Days

$ 1,770.99 USD

Add to Wish List

Qty

$ 1,770.99 USD

Add to Wish List

This intercooler kit is a direct-fit solution that requires no modifications to your BMW.

Macht Schnell Intake Charge Scoop Set (Orange) - F8X M3/M4

T#:5886936

Part#: 19.12.11XORN

Ships in 9 Business Days

$ 125.99 USD

Add to Wish List

Qty

$ 125.99 USD

Add to Wish List

Macht Schnell Intake Charge Scoops assist in air delivery by diverting cold, fresh air through the kidney grilles into the airbox. This allows for a noticeable power gain found at higher speeds especially on vehicles equipped with our High Performance Filters. The scoops are constructed from steel and powdercoated, guaranteed to prevent bending and rusting even after years of use. Priced per pair.

Show More Show Less

Forge Silicone Vacuum Hoses

T#:558490

Part#: FORGEVAC

Ships on Aug 11, 2026

Starting at $ 14.99 USD

Add to Wish List

Starting at $ 14.99 USD

Add to Wish List

Car suffering from vacuum leaks? Choose from a 4mm, 5mm, or 6mm diameter vacuum hose from Forge to fix your leak and bring your BMW back to life.

FTP Motorsports - Full Color Charge Pipe + Boost Pipe F80/F82 S55 M3/...

T#:36269410

Part#: SG71350-Y

Special Order: No Guaranteed ETA

$ 570.00 USD

Add to Wish List

Qty

$ 570.00 USD

Add to Wish List

FTP Motorsports - Full Color Charge Pipe + Boost Pipe F80/F82 S55 M3/M4 (Yellow)

FTP Motorsports - Full Color Charge Pipe + Boost Pipe F80/F82 S55 M3/M4 (Yellow) is the ultimate performance upgrade for BMW enthusiasts looking to enhance their engine's reliability and style. Available through Turner Motorsport, this high-quality kit is specifically designed for BMW F80 M3 and F82 M4 models equipped with the powerful S55 engine.

This upgrade replaces the fragile OEM charge pipe and boost pipe with a durable, crack-resistant solution that ensures optimal airflow and performance under high-boost conditions. The eye-catching yellow finish not only adds a custom look to your engine bay but also reflects the premium craftsmanship FTP Motorsports is known for.

Key Features and Benefits

Precision-engineered for BMW F80 M3 and F82 M4 models with S55 engines
Constructed from durable materials to withstand extreme boost pressures and temperatures
Optimized for smooth, unrestricted airflow to enhance turbo response and performance
Vibrant yellow finish for a stylish and unique engine bay upgrade
Eliminates cracking and failure common in OEM components
Direct-fit design for easy installation without modifications
Perfect for track and street performance applications

Upgrade your BMW F80 M3 or F82 M4 with the FTP Motorsports - Full Color Charge Pipe + Boost Pipe F80/F82 S55 M3/M4 (Yellow), available now at Turner Motorsport for improved performance, reliability, and style.

Show More Show Less

3MM Silicone Vacuum Hose - Red - 9 Feet

T#:370915

Part#: VC03R

Back Ordered

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

Upgrade Your BMW with Forge 3MM Silicone Vacuum Hose - Red - 9 Feet

Upgrade your BMW's vacuum system with the Forge 3MM Silicone Vacuum Hose in Red, a high-quality solution designed for optimal performance and durability. This 9-foot silicone vacuum hose provides superior flexibility and resistance to extreme temperatures, making it ideal for various automotive applications. Engineered with precision, it ensures reliable vacuum pressure for efficient engine operation and component functionality. Whether you're replacing worn-out hoses or customizing your BMW's vacuum setup, the Forge Silicone Vacuum Hose offers reliability and performance you can trust.

High-quality silicone construction for durability
Superior flexibility for easy installation
Resistant to extreme temperatures
Ensures reliable vacuum pressure for efficient engine operation
Ideal for various automotive applications

Car suffering from vacuum leaks? This vacuum hose has a 3mm inner diameter.

Show More Show Less

4MM Silicone Vacuum Hose - Blue - 9 Feet

T#:370917

Part#: VC04

In Stock

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

Car suffering from vacuum leaks? This vacuum hose has a 4mm inner diameter.

4MM Silicone Vacuum Hose - Black - 9 Feet

T#:370919

Part#: VC04B

In Stock

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

Car suffering from vacuum leaks? This vacuum hose has a 4mm inner diameter.

BMS Billet Water/Methanol Injection Tank Cap With Safety Check Valve ...

T#:20815185

Part#: BMSWMITC

Ships in 6 Business Days

$ 59.00 USD

Add to Wish List

Qty

$ 59.00 USD

Add to Wish List

The Burger Motorsports custom billet Water/Methanol Injection (WMI) cap includes an integrated heavy-duty check valve to let much-needed air in and prevent dangerous WMI vapor/fumes and liquid from getting out! Each cap is CNC machined in the USA from a solid block of billet aluminum, engraved with the BMS logo, and anodized blue for protection. Check valve piston must be lightly lubricated if tank shows signs of vacuum. One drop of penetrating oil or motor oil in the top will keep the check valve operational. Features and Benefits Integrated heavy-duty check valve lets air in but not out Specifically designed to prevent evaporation Keeps vapors inside the tank Made from a solid block of billet aluminum Blue anodizing for corrosion protection Exaggerated grips for easy removal Integrated heavy-duty o-ring Made in the USA

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Intake Parts for BMW F80 M3 S55 3.0L

Sub-Categories

Benefits:

Enhance Engine Performance with Silicone Vacuum Line

FTP Motorsports - Full Color Charge Pipe + Boost Pipe F80/F82 S55 M3/M4 (Yellow)

Key Features and Benefits

Upgrade Your BMW with Forge 3MM Silicone Vacuum Hose - Red - 9 Feet

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Narrow Results