BMW Suspension Parts for BMW F82 M4 S55 3.0L

BC Racing BR Series Coilover Suspension Kit - 5-Bolt Top Mounts - 201...

For vehicles with 5-Bolt Top Mounts & EDC Suspension

For vehicles with 5-Bolt Mounts and EDC

T#:555818

Part#: I-68-BR

Ships in 5 Business Days

$ 1,195.00 USD

Add to Wish List

Qty

$ 1,195.00 USD

Add to Wish List

BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.

Show More Show Less

Bilstein B16 PSS10 Coil Over Suspension - F80 M3, F82 M4, F87 M2 ...

Fits vehicles without electronic (EDC/Adaptive) suspension

10X Entries Into Our F80 M3 Sweepstakes

T#:215352

Part#: 48-244091

Ships in 2 Business Days

31% off MSRP $ 3,755.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,599.00 USD

Add to Wish List

Qty

31% off MSRP

$ 3,755.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,599.00 USD

Add to Wish List

The B16 PSS10 coilovers offer a stiffer spring rate than stock and a lower ride height for less bodyroll and better handling. These are among the easiest coil over kits on the market - no special mounts required (works with stock mounts and sway bar links), larger adjustment knob allows for easy shock damping changes, and coil over spanner wrenches included for easy height changes. Bilstein backs up their technology with a limited lifetime warranty. TUV approved for fitment, safety, and quality!

Show More Show Less

BC Racing BR Series Coilover Suspension Kit - 3-Bolt Top Mount - BMW ...

For 2014-2015 Models with 3-Bolt Front Strut Mounts and EDC Suspension

T#:555827

Part#: I-49-BR

In Stock

$ 1,195.00 USD

Add to Wish List

Qty

$ 1,195.00 USD

Add to Wish List

BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.

Show More Show Less

Bilstein B16 DampTronic Coilover Kit - F80 M3, F82/83 M4

10X Entries Into Our F80 M3 Sweepstakes

T#:555362

Part#: 49-246988

In Stock

31% off MSRP $ 5,576.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 3,859.00 USD

Add to Wish List

Qty

31% off MSRP

$ 5,576.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 3,859.00 USD

Add to Wish List

All of the active features of the factory electronic suspension, along with the factory controls, will be retained with the installation of this kit. These kits offer monotube performance dampers with matched springs that are tuned for each specific application. The zinc coated and threaded body design will give you the flexibility to find the perfect ride height setting for your intended use while providing unsurpassed protection against the harshest road elements. B16 (DampTronic) suspension kits are made in Germany and feature technology tested on the famed Nurburgring

Show More Show Less

BC Racing BR Series Extreme Low Coilover Suspension Kit - 5-Bolt Top ...

For vehicles with 5-Bolt Top Mounts & EDC Suspension

For vehicles with 5-Bolt Mounts and EDC

T#:568069

Part#: I-68E-BR

Ships on Dec 2, 2026

$ 1,345.00 USD

Add to Wish List

Qty

$ 1,345.00 USD

Add to Wish List

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you. BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop, up to 5". To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.

Show More Show Less

Bilstein Clubsport Coilover System - F80/F82/F83 M3/M4 (3-Bolt Mount ...

For vehicles without EDC/Adaptive suspension and with a 3 hole front upper mount

10X Entries Into Our F80 M3 Sweepstakes

T#:3327195

Part#: 48-256292

Ships in 4 Business Days

$ 4,759.00 USD

Add to Wish List

Qty

$ 4,759.00 USD

Add to Wish List

The Bilstein Clubsport is a high-end coilover suspension kit for both road and race track. The best thing about it: the suspension setting can be adjusted by means of premium color-coded aluminum motorsport adjustment wheels using rebound and compression force independently of each other noticeably, quickly, simply and precisely.

Show More Show Less

BC Racing DS Series Coilover Suspension Kit - 3-Bolt Top Mount - BMW ...

For 2014-2015 Models with 3-Bolt Front Strut Mounts and EDC Suspension

T#:598295

Part#: I-49-DS

Back Ordered

$ 1,395.00 USD

Add to Wish List

Qty

$ 1,395.00 USD

Add to Wish List

The DS series from BC racing offers increased control and feedback for those looking to achieve the best driving experience possible. Digressive Valving means the shock is firmer at low speed, while transitioning to a softer and more linear feel as (shaft) speed increases. This leads to a much more planted and controlled feeling in the chassis, increased feedback through the wheel, and a slight drop in passenger comfort. Swift Springs are available upon request with your choice of rates and matched or custom valving.

Show More Show Less

BC Racing DS Series Coilover Suspension Kit - 5-Bolt Top Mounts - 201...

For vehicles with 5-Bolt Top Mounts & EDC Suspension

T#:598299

Part#: I-68-DS

Back Ordered

$ 1,395.00 USD

Add to Wish List

Qty

$ 1,395.00 USD

Add to Wish List

The DS series from BC racing offers increased control and feedback for those looking to achieve the best driving experience possible. Digressive Valving means the shock is firmer at low speed, while transitioning to a softer and more linear feel as (shaft) speed increases. This leads to a much more planted and controlled feeling in the chassis, increased feedback through the wheel, and a slight drop in passenger comfort. Swift Springs are available upon request with your choice of rates and matched or custom valving.

Show More Show Less

BR Series Coilover Suspension Kit With Swift Springs Upgrade ...

For vehicles with 5-Bolt Mounts and EDC*

T#:585960

Part#: I-68-BR-SW

Ships on Dec 2, 2026

$ 1,715.00 USD

Add to Wish List

Qty

$ 1,715.00 USD

Add to Wish List

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you. BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components. The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below. Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically. The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability. All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection. For vehicles with 5-Bolt mounts and EDC* (*Requires EDC Elimination kit. See T#405066) Specs and Features: 7k Front & 14k Rear Spring Rate Linear front & Linear rear springs Valved specifically to spring style and rate Camber Plate Front Mounts Aluminum and Rubber Rear Mounts Black Powder Coated Components All OE style brackets and mounting for perfect fit 30 Levels of Simultaneous Compression and Rebound Dampening 2 inch minimum and 3+ Inches of total potential drop Great for Track, Street, and any other conditions

Show More Show Less

BC Racing BR Series Extreme Low Coilover Kit - 3-Bolt Top Mount - BMW...

For 2014-2015 Models with 3-Bolt Front Strut Mounts and EDC Suspension

T#:568076

Part#: I-49E-BR

Ships on Dec 2, 2026

$ 1,345.00 USD

Add to Wish List

Qty

$ 1,345.00 USD

Add to Wish List

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you. BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop, up to 5". To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months.

Show More Show Less

Bilstein B12 Pro Suspension Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:13924891

Part#: 46-281784

Ships in 4 Business Days

$ 2,569.00 USD

Add to Wish List

Qty

$ 2,569.00 USD

Add to Wish List

Bilstein's B12 suspension kit is the go-to option for a sporty suspension upgrade. Developed specifically for your vehicle, the B12 is engineered for ease of installation and tailored to the ride dynamics of your suspension. The spring compression height and motion ratio remain the same, just like your original suspension geometry. This means that ground clearance remains the same and nothing grinds or rubs!

Show More Show Less

BC Racing ER Series Coilover Suspension Kit - 5-Bolt Top Mounts - 201...

For vehicles with 5-Bolt Top Mounts & EDC Suspension

T#:4347105

Part#: I-68-ER

Back Ordered

$ 1,935.00 USD

Add to Wish List

Qty

$ 1,935.00 USD

Add to Wish List

The ER Series coilovers bring with them the high quality and unique features seen on the BR and RM type but have the additional benefit of external reservoirs and the ability to allow the end user to individually adjust and set compression and rebound damping rates. By separating the adjustment for damping compression and rebound the ER Series allows you to dial the vehicle in to your exact needs. When braking hard whilst approaching a corner you want the car to transfer weight to the front tires to maximize grip for the braking effort and also to allow you to trail brake into the corner without the car understeering. Ride height adjustment: Ride height is determined by the position of the coil over bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment. Because ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Mono-Tube Damper Linear Twin-Piston Design Height Adjustment Independent Of Spring Compression 30-Clicks Of Compression Adjustment Via The External Reservoirs 30-Clicks Of Rebound Adjustment From The Top Of The Damper Front And Rear Camber Plates Standard On All Applicable Kits Front And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply Custom Spring Rates And Swift Spring Compatible Custom Valved To Match The Drivers Requested Spring Rates Swift Spring Upgrade Available On Most Applications 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES ON ALL NEW ORDERS 4-8 WEEKS

Show More Show Less

BC Racing ER Series Coilover Suspension Kit - 3-Bolt Top Mount - BMW ...

For 2014-2015 Models with 3-Bolt Front Strut Mounts and EDC Suspension

T#:4347104

Part#: I-49-ER

Back Ordered

$ 1,935.00 USD

Add to Wish List

Qty

$ 1,935.00 USD

Add to Wish List

The ER Series coilovers bring with them the high quality and unique features seen on the BR and RM type but have the additional benefit of external reservoirs and the ability to allow the end user to individually adjust and set compression and rebound damping rates. By separating the adjustment for damping compression and rebound the ER Series allows you to dial the vehicle in to your exact needs. When braking hard whilst approaching a corner you want the car to transfer weight to the front tires to maximize grip for the braking effort and also to allow you to trail brake into the corner without the car understeering. Ride height adjustment: Ride height is determined by the position of the coil over bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment. Because ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Mono-Tube Damper Linear Twin-Piston Design Height Adjustment Independent Of Spring Compression 30-Clicks Of Compression Adjustment Via The External Reservoirs 30-Clicks Of Rebound Adjustment From The Top Of The Damper Front And Rear Camber Plates Standard On All Applicable Kits Front And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply Custom Spring Rates And Swift Spring Compatible Custom Valved To Match The Drivers Requested Spring Rates Swift Spring Upgrade Available On Most Applications 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES ON ALL NEW ORDERS 4-8 WEEKS

Show More Show Less

BC Racing RM Series Coilover Suspension Kit - 5-Bolt Top Mounts - 201...

For vehicles with 5-Bolt Top Mounts & EDC Suspension

T#:47439395

Part#: I-68-RM

Back Ordered

$ 1,515.00 USD

Add to Wish List

Qty

$ 1,515.00 USD

Add to Wish List

The BC Racing RM Series Coilover System uses a mono-tube inverted damper in the front and rear of vehicles that use McPherson style OEM strut suspension. On vehicles that use front struts only, BC Racing provides an inverted front strut and then provides an upright BR Series damper for the rear. Inverted dampers are useful in decreasing unsprung weight by moving the greatest mass of the strut to the top where it connects to the sprung weight of the chassis, where weight can be more easily shaved. The BC Racing RM Series Coilover System uses a much larger inverted piston shaft that can handle higher lateral loads for longer periods of time without fatigue. These higher lateral loads are only prevalent on McPherson style strut suspension, not on Double A-Arm vehicles.

Show More Show Less

BC Racing RM Series Coilover Suspension Kit - 3-Bolt Top Mount - BMW ...

For 2014-2015 Models with 3-Bolt Front Strut Mounts and EDC Suspension

T#:47439436

Part#: I-49-RM

Back Ordered

$ 1,515.00 USD

Add to Wish List

Qty

$ 1,515.00 USD

Add to Wish List

The BC Racing RM Series Coilover System uses a mono-tube inverted damper in the front and rear of vehicles that use McPherson style OEM strut suspension. On vehicles that use front struts only, BC Racing provides an inverted front strut and then provides an upright BR Series damper for the rear. Inverted dampers are useful in decreasing unsprung weight by moving the greatest mass of the strut to the top where it connects to the sprung weight of the chassis, where weight can be more easily shaved. The BC Racing RM Series Coilover System uses a much larger inverted piston shaft that can handle higher lateral loads for longer periods of time without fatigue. These higher lateral loads are only prevalent on McPherson style strut suspension, not on Double A-Arm vehicles.

Show More Show Less

BC Racing HM Series Coilover Suspension Kit - 5-Bolt Top Mounts - 201...

For vehicles with 5-Bolt Top Mounts & EDC Suspension

T#:47439396

Part#: I-68-HM

Back Ordered

$ 2,565.00 USD

Add to Wish List

Qty

$ 2,565.00 USD

Add to Wish List

The BC Racing HM Series Coilover System gets its great qualities from a combination of two previous BC Racing Coilover Systems - the RM Series and ER Series. The HM Series uses an inverted mono-tube damper, just like the RM Series, but adds the independent compression and rebound adjustment of the ER Series. Each HM Series Coilover System uses inverted mono-tube dampers front and rear on McPherson strut vehicles with steel braided lines leading from the top of the damper to the external reservoirs. The external reservoirs allow for a higher oil capacity with the added benefit of increased thermal dissipation, they also house the secondary damping piston. For Subarus and other McPherson suspension vehicles that are heavily tracked, the BC Racing HM Series Suspension System is definitely worth checking out!

Show More Show Less

BC Racing HM Series Coilover Suspension Kit - 3-Bolt Top Mount - BMW ...

For 2014-2015 Models with 3-Bolt Front Strut Mounts and EDC Suspension

T#:47439437

Part#: I-49-HM

Back Ordered

$ 2,565.00 USD

Add to Wish List

Qty

$ 2,565.00 USD

Add to Wish List

The BC Racing HM Series Coilover System gets its great qualities from a combination of two previous BC Racing Coilover Systems - the RM Series and ER Series. The HM Series uses an inverted mono-tube damper, just like the RM Series, but adds the independent compression and rebound adjustment of the ER Series. Each HM Series Coilover System uses inverted mono-tube dampers front and rear on McPherson strut vehicles with steel braided lines leading from the top of the damper to the external reservoirs. The external reservoirs allow for a higher oil capacity with the added benefit of increased thermal dissipation, they also house the secondary damping piston. For Subarus and other McPherson suspension vehicles that are heavily tracked, the BC Racing HM Series Suspension System is definitely worth checking out!

Show More Show Less

SPL Parts Pro Adjustable Front Sway Bar End Link Pair - F8X M2/3/4 ...

T#:553784

Part#: SPLFEF8X

In Stock

$ 224.00 USD

Add to Wish List

Qty

$ 224.00 USD

Add to Wish List

SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using chromoly seamless straight tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium quality products that are perfect to get your car back in spec.

Show More Show Less

SPL Parts Titanium Series Front Tension Rod Pair - E9X E8X F8X ...

T#:553657

Part#: SPLTRE9X

In Stock

$ 629.00 USD

Add to Wish List

Qty

$ 629.00 USD

Add to Wish List

SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using chromoly seamless straight tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium qulaity products that are perfect to get your car back in spec.

Show More Show Less

SPL Parts Titanium Series Adjustable Rear Toe Arms with Eccentric Loc...

T#:553695

Part#: SPLRTAELF8X

In Stock

$ 449.00 USD

Add to Wish List

Qty

$ 449.00 USD

Add to Wish List

SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using chromoly seamless straight tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium quality products that are perfect to get your car back in spec.

Show More Show Less

SPL Parts Pro Adjustable Rear Sway Bar End Link Pair - F8X M2/3/4 ...

T#:553734

Part#: SPLREF8X

Ships in 2 Business Days

$ 224.00 USD

Add to Wish List

Qty

$ 224.00 USD

Add to Wish List

When lowering your vehicle it is important to have adjustable end links to correct preload on your sway bars. Sometimes suspension is set improperly from left to right corner - SPL adjustable end links allow you to quickly and properly eliminate preload no matter what the situation calls for.

Show More Show Less

F8x M2/M3/M4 B4 Rear Shock Absorber - Priced Each

For vehicles without EDC

10X Entries Into Our F80 M3 Sweepstakes

T#:598555

Part#: 19-265803

Ships in 2 Business Days

$ 102.00 USD

Add to Wish List

Qty

$ 102.00 USD

Add to Wish List

Bilstein B4 OE Replacement Series gas pressure shocks and struts are specifically engineered to be the best choice for maintaining the original ride quality of your vehicle, while meeting or exceeding OE standards. These dampers are the ideal choice for the driver looking to restore the original performance and handling of their vehicle, with the added benefit of world-famous Bilstein quality.

Show More Show Less

SPL Parts Titanium Series Adjustable Front Lower Street Control Arms ...

T#:553775

Part#: SPLFLCAF8X

Ships in 5 Business Days

$ 719.00 USD

Add to Wish List

Qty

$ 719.00 USD

Add to Wish List

SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using chromoly seamless straight tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium quality products that are perfect to get your car back in spec.

Show More Show Less

SPL Parts Titanium Series Rear Lower Traction Arm Pair - F8X M2 M3 M4...

T#:553689

Part#: SPLRTRF8X

Ships in 2 Business Days

$ 449.00 USD

Add to Wish List

Qty

$ 449.00 USD

Add to Wish List

SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using chromoly seamless straight tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium quality products that are perfect to get your car back in spec.

Show More Show Less

SPL Parts Titanium Series Rear Upper Control Arm Set - F8X BMW ...

T#:553663

Part#: SPLRUAF8X

Ships in 7 Business Days

$ 809.00 USD

Add to Wish List

Qty

$ 809.00 USD

Add to Wish List

SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using chromoly seamless straight tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium quality products that are perfect to get your car back in spec.

Show More Show Less

SPL Parts Titanium Series Adjustable Rear Toe Arm Pair - F8X M2/3/4 ...

T#:553694

Part#: SPLRTAF8X

Ships in 2 Business Days

$ 404.00 USD

Add to Wish List

Qty

$ 404.00 USD

Add to Wish List

When lowering your vehicle, toe alignment is thrown off. These SPL adjustable toe arms offer a wide range of toe adjustment and are a significant improvement over stock, eliminating suspension deflection and increasing handling response thanks to the FK Bushings rod ends that are Teflon lined.

Show More Show Less

Bilstein B6 Performance Front Right Shock - F80 M3, F82/3 M4, F87 M2 ...

10X Entries Into Our F80 M3 Sweepstakes

T#:221933

Part#: 35-244110

In Stock

$ 359.00 USD

Add to Wish List

Qty

$ 359.00 USD

Add to Wish List

Front Bilstein B6 Performance shock. Performance shocks are for cars with the standard, factory suspension. They are typically about 20% firmer than the original shock, improving body roll, brake dive, and overall handling. Includes top nut, stock dust boot is re-used. Price is per shock.

Show More Show Less

Bilstein B6 Performance Front Left Shock - F80 M3, F82/3 M4, F87 M2 (...

10X Entries Into Our F80 M3 Sweepstakes

T#:221934

Part#: 35-244059

In Stock

$ 359.00 USD

Add to Wish List

Qty

$ 359.00 USD

Add to Wish List

Front Bilstein B6 Performance shock. Performance shocks are for cars with the standard, factory suspension. They are typically about 20% firmer than the original shock, improving body roll, brake dive, and overall handling. Includes top nut, stock dust boot is re-used. Price is per shock.

Show More Show Less

Bilstein B6 Performance Rear Shock - F8X M2 M3 M4 (without EDC) ...

For vehicles without EDC

10X Entries Into Our F80 M3 Sweepstakes

T#:347137

Part#: 24-244060

In Stock

33% off MSRP $ 296.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 199.00 USD

Add to Wish List

Qty

33% off MSRP

$ 296.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 199.00 USD

Add to Wish List

Rear Bilstein B6 Performance shock. Performance shocks are for cars with the standard, factory suspension. They are typically about 20% firmer than the original shock, improving body roll, brake dive, and overall handling. Includes top nut, stock dust boot is re-used. Price is per shock.

Show More Show Less

BMW F80/82/83 M3 M4 Bilstein B6 Performance Front Struts Pair ...

10X Entries Into Our F80 M3 Sweepstakes

T#:393560

Part#: 31-246217KT

In Stock

$ 1,318.00 USD

Add to Wish List

Qty

$ 1,318.00 USD

Add to Wish List

Bilstein strut/shock package for stock springs. Set includes 2 front Bilstein B6 Performance shocks and 2 rear Bilstein B6 Performance shocks. Includes top nuts and rear lower shock washers. The stock rear dust boots are re-used. The Bilstein B6 Performance Shock is designed for use with stock springs. These shocks provide improved handling and stability without sacrificing ride comfort.

This Bilstein B6 Performance shock package fits the following BMWs:
2015-2017 F80/82/83 BMW M3 M4

Show More Show Less

F8X M3/M4 B6 Rear Performance DampTronic Shock Absorber - Right ...

For vehicles with EDC

10X Entries Into Our F80 M3 Sweepstakes

T#:591009

Part#: 26-246970

In Stock

$ 549.00 USD

Add to Wish List

Qty

$ 549.00 USD

Add to Wish List

Position: Rear Right Setting: Performance, for stock suspensions The Bilstein B6 Performance Shock is designed for use with stock springs. They are typically about 20% firmer than the original shock, improving body roll, brake dive, and overall handling. These shocks provide improved handling and stability without sacrificing ride comfort. DampTronic B6 Performance shocks and struts are intended to be used with OE springs, allowing you to upgrade your rides performance while retaining factory electronic suspension and controls. Bilstein recommends B8 Performance Plus shocks and struts when lowering a vehicle with lowering springs. This Performance Front shock fits the following BMWs: BMW M3 2018-2015, M4 2020-2015

Show More Show Less

Bilstein B4 OE Replacement Damptronic Suspension Strut Assembly Front...

10X Entries Into Our F80 M3 Sweepstakes
For Vehicles with Electronic Suspension

T#:3486115

Part#: 23-246942

Ships in 4 Business Days

$ 639.00 USD

Add to Wish List

Qty

$ 639.00 USD

Add to Wish List

Bilstein B4 OE Replacement shocks are designed to maintain original ride quality of your vehicle, while meeting or exceeding OE standards. These shocks are an excellent replacement for OE with regard to both cost and quality and Bilstein's world-renown reputation. If your front end ride quality is becoming increasingly poor over time and your electronic suspension feels unresponsive, it may be time to replace your strut assemblies. Bilstein's B4 series Damptronic shocks are the perfect replacement for a driver looking to replace their worn suspension parts with a reputable aftermarket offering. Can be paired with OE springs. Fits front right. Cross reference: Autozone 23246942 BMW 31318008628 BMW 31312284788

Show More Show Less

Bilstein B6 Performance Front Strut - Right

For vehicles with EDC

10X Entries Into Our F80 M3 Sweepstakes

T#:393559

Part#: 31-246217

In Stock

33% off MSRP $ 981.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 659.00 USD

Add to Wish List

Qty

33% off MSRP

$ 981.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 659.00 USD

Add to Wish List

If you’re looking for suspension performance, the BILSTEIN B6 Performance series shock absorber and strut is the best solution to improve your car’s ride. Unbelievable control, precise handling, ultimate performance and incredible comfort. You'll soon discover there is, quite literally, nothing like it.

Show More Show Less

Bilstein B6 Performance Front Strut - Left F8X M3/M4

10X Entries Into Our F80 M3 Sweepstakes

T#:393558

Part#: 31-246200

In Stock

33% off MSRP $ 981.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 659.00 USD

Add to Wish List

Qty

33% off MSRP

$ 981.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 659.00 USD

Add to Wish List

If you’re looking for suspension performance, the BILSTEIN B6 Performance series shock absorber and strut is the best solution to improve your car’s ride. Unbelievable control, precise handling, ultimate performance and incredible comfort. You'll soon discover there is, quite literally, nothing like it.

Show More Show Less

SPL Parts Caster Adjustable Tension/Trailing Rod Bushings - E8X E9X F...

T#:553806

Part#: SPLCRBE9X

Ships in 2 Business Days

$ 413.00 USD

Add to Wish List

Qty

$ 413.00 USD

Add to Wish List

SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using chromoly seamless straight tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium quality products that are perfect to get your car back in spec.

Show More Show Less

Dinan - M3 Front & Rear Adjustable Sway Bar Set - F87 M2, F8X M3/M4 ...

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:389134

Part#: D120-0605

Ships in 6 Business Days

Sale - Save 10% $ 949.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 854.96 USD

Add to Wish List

Qty

Sale - Save 10%

$ 949.99

This product was last offered at the strikethrough price on
09-28-2026

$ 854.96 USD

Add to Wish List

Dinan sway bars are carefully engineered to match the driving dynamics of each BMW chassis. Dinan's research and development finds the ideal balance between improved handling while maintaining a comfortable ride. This set has been fine-tuned for the F8X M3/M4 and F87 M2 chassis to reduce bodyroll, improve steering and turn-in response, and reduce understeer. The front and rear bars are hollow tubular steel for light weight with adjustable ends to dial in the handling characteristics. These are the same sway bars used in Dinan's Stage 1 suspension and work best with Dinan shocks and springs or a similar sport suspension.

Show More Show Less

BMW F8X M3 M3 M4 Rear Suspension Link Kit

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes
Call In, Chat, Or Email, For Best Price! Limited Time Only!

T#:554937

Part#: D280-0015

Back Ordered

Sale - Save 10% $ 1,049.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 944.96 USD

Add to Wish List

Qty

Sale - Save 10%

$ 1,049.99

This product was last offered at the strikethrough price on
09-28-2026

$ 944.96 USD

Add to Wish List

BMW F8X M3 M4 Rear Suspension Link Kit is designed to enhance the handling and stability of your high-performance BMW. This kit eliminates the vagueness and flex commonly associated with stock rear suspension links, which rely on rubber bushings that can flex under load. By replacing these with Teflon-coated, machined steel rod ends and billet aluminum rods, this kit ensures a more planted and secure feel, especially during hard acceleration, braking, and cornering. The rods feature a hex design for easy adjustments, making it an ideal upgrade for those running larger wheels and tires.

Improved Stability: Eliminates flex under acceleration, braking, and cornering for a more secure feel.
High-Quality Materials: Teflon-coated, machined steel rod ends and billet aluminum rods.
Adjustable Design: Hex machined center rods for easy adjustment.
Enhanced Handling: Reduces vagueness and provides a more planted driving experience.
Ideal for Upgrades: Recommended for use with larger wheels and tires.
Turner Motorsport Quality: Trusted performance parts backed by over 35 years of BMW tuning expertise.

Show More Show Less

F80, F82, F83, F87 Dinan Monoball Front Thrust Arm Bushings (Pair) ...

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:396651

Part#: D280-0017

Back Ordered

Sale - Save 10% $ 531.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 478.76 USD

Add to Wish List

Qty

Sale - Save 10%

$ 531.99

This product was last offered at the strikethrough price on
09-28-2026

$ 478.76 USD

Add to Wish List

For someone looking for superior performance and longevity these sealed monoball bushings are the best upper thrust bearing you can buy for an E82 1-series or E9X 3-series. The advantage of a monoball bearing is that it will not deflect under load. All of the rubber bushings move in all sorts of directions and that changes your alignment, especially when used with big brake kits or when driven hard. The condition worsens as the bushing wears out. The Dinan monoball sits in a CNC machined aluminum housing which has zero deflection. The monoball allows complete freedom of movement but only at the desired angles. What you get is superior steering precision, better handling from more consistent alignment, and almost infinite bushing life. And thanks to the inner liner and sealed rubber boots there's none of the extra noise or reduced service life of fully solid race bushings.

Show More Show Less

F8x M2/M3/M4 B4 Front Shock Absorber - Left

10X Entries Into Our F80 M3 Sweepstakes
For vehicles without EDC

T#:598553

Part#: 22-265784

Special Order: No Guaranteed ETA

$ 143.00 USD

Add to Wish List

Qty

$ 143.00 USD

Add to Wish List

Bilstein B4 OE Replacement Series gas pressure shocks and struts are specifically engineered to be the best choice for maintaining the original ride quality of your vehicle, while meeting or exceeding OE standards. These dampers are the ideal choice for the driver looking to restore the original performance and handling of their vehicle, with the added benefit of world-famous Bilstein quality.

Show More Show Less

Bilstein B4 OE Replacement Damptronic Suspension Strut Assembly Front...

10X Entries Into Our F80 M3 Sweepstakes
For Vehicles with Electronic Suspension

T#:4510695

Part#: 23-246935KT

Ships on Feb 22, 2027

$ 1,286.99 USD

Add to Wish List

Qty

$ 1,286.99 USD

Add to Wish List

Bilstein B4 OE Replacement shocks are designed to maintain original ride quality of your vehicle, while meeting or exceeding OE standards. These shocks are an excellent replacement for OE with regard to both cost and quality and Bilstein's world-renown reputation. If your front end ride quality is becoming increasingly poor over time and your electronic suspension feels unresponsive, it may be time to replace your strut assemblies. Bilstein's B4 series Damptronic shocks are the perfect replacement for a driver looking to replace their worn suspension parts with a reputable aftermarket offering. Can be paired with OE springs. Fits front set for left and right.

Show More Show Less

Bilstein B4 OE Damptronic Shock and Strut Package - F80 F82 F83 (With...

For vehicles with EDC suspension

10X Entries Into Our F80 M3 Sweepstakes

T#:5309560

Part#: 23-246935KT1

Back Ordered

$ 2,140.99 USD

Add to Wish List

Qty

$ 2,140.99 USD

Add to Wish List

Bilstein strut/shock package for stock springs. Set includes 2 front Bilstein B4 OE Replacement struts and 2 rear Bilstein B4 OE Replacement shocks. Bilstein B4 Series gas pressure shocks and struts are specifically designed to be the economical choice for replacing the dampers on your vehicle. The B4 Series shocks and struts are rigorously engineered to meet OE standards and identically replicate the original ride quality of your vehicle. Shock dampening and rebound is set to match the original specifications from the factory to retain the same handling, stability, and ride comfort, but with the superior Bilstein quality for a long life and consistent performance in every condition. Lifetime warranty!

Show More Show Less

F8x M2/M3/M4 B4 Front Shock Absorber - Right

10X Entries Into Our F80 M3 Sweepstakes
For vehicles without EDC

T#:598554

Part#: 22-265791

Special Order: No Guaranteed ETA

$ 143.00 USD

Add to Wish List

Qty

$ 143.00 USD

Add to Wish List

Bilstein B4 OE Replacement Series gas pressure shocks and struts are specifically engineered to be the best choice for maintaining the original ride quality of your vehicle, while meeting or exceeding OE standards. These dampers are the ideal choice for the driver looking to restore the original performance and handling of their vehicle, with the added benefit of world-famous Bilstein quality.

Show More Show Less

B6 Performance Rear Shock - Pair

For vehicles with EDC

10X Entries Into Our F80 M3 Sweepstakes

T#:591010

Part#: 26-245591KT

Ships on Feb 23, 2027

$ 1,098.00 USD

Add to Wish List

Qty

$ 1,098.00 USD

Add to Wish List

Unbelievable control, precise handling, ultimate performance and incredible comfort. German-made with world-famous Bilstein quality and a limited lifetime warranty!

BMW M3 2018-2015, M4 2019-2015 - Rear Left B6 Performance (DampTronic...

For vehicles with EDC

10X Entries Into Our F80 M3 Sweepstakes

T#:591008

Part#: 26-245591

Ships on Feb 23, 2027

$ 549.00 USD

Add to Wish List

Qty

$ 549.00 USD

Add to Wish List

Position: Rear Left Setting: Performance, for stock suspensions The Bilstein B6 Performance Shock is designed for use with stock springs. They are typically about 20% firmer than the original shock, improving body roll, brake dive, and overall handling. These shocks provide improved handling and stability without sacrificing ride comfort. DampTronic B6 Performance shocks and struts are intended to be used with OE springs, allowing you to upgrade your rides performance while retaining factory electronic suspension and controls. Bilstein recommends B8 Performance Plus shocks and struts when lowering a vehicle with lowering springs. This Performance Front shock fits the following BMWs: BMW M3 2018-2015, M4 2020-2015

Show More Show Less

Bilstein B6 Performance DampTronic Shock and Strut Package - F80 M3, ...

For vehicles with EDC

10X Entries Into Our F80 M3 Sweepstakes

T#:591012

Part#: 26-245591KT2

Ships on Feb 23, 2027

$ 2,416.00 USD

Add to Wish List

Qty

$ 2,416.00 USD

Add to Wish List

Bilstein strut/shock package for stock springs. Set includes 2 front Bilstein B6 Performance shocks and 2 rear Bilstein B6 Performance shocks. Includes top nuts and rear lower shock washers. The stock rear dust boots are re-used. The Bilstein B6 Performance Shock is designed for use with stock springs. They are typically about 20% firmer than the original shock, improving body roll, brake dive, and overall handling. These shocks provide improved handling and stability without sacrificing ride comfort. DampTronic B6 Performance shocks and struts are intended to be used with OE springs, allowing you to upgrade your rides performance while retaining factory electronic suspension and controls. Bilstein recommends B8 Performance Plus shocks and struts when lowering a vehicle with lowering springs. This Performance Front shock fits the following vehicles: BMW M3 2018-2015, M4 2020-2015

Show More Show Less

Bilstein B6 Performance Shock and Strut Package - F87 M2, F80 M3, F82...

10X Entries Into Our F80 M3 Sweepstakes

T#:393141

Part#: 35-244059KT

In Stock

$ 1,116.00 USD

Add to Wish List

Qty

$ 1,116.00 USD

Add to Wish List

Bilstein strut/shock package for stock springs. Set includes 2 front Bilstein B6 Performance shocks and 2 rear Bilstein B6 Performance shocks. Includes top nuts and rear lower shock washers. The stock rear dust boots are re-used. The Bilstein B6 Performance Shock is designed for use with stock springs. These shocks provide improved handling and stability without sacrificing ride comfort.

Show More Show Less

ASP Series Height Adjustable Spring & Camber Plate Kit - BMW F80 M3, ...

For vehicles with 5-Bolt front strut mounts

T#:52621850

Part#: 131BW001C1

Ships in 6 Business Days

$ 1,115.00 USD

Add to Wish List

Qty

$ 1,115.00 USD

Add to Wish List

BC Racing’s new adjustable spring perch (ASP) is an excellent solution for customers seeking a lowered stance, but still require the OEM electronic damping system to remain functional. Compared with conventional lowering springs, the BC Racing ASP offers ride height adjustability that seamlessly allows users more flexibility to tailor their chassis to the needs of modern suspension, performance, and style.

Show More Show Less

ASP Series Height Adjustable Spring Kit - BMW F80 M3, F82 M4 (RWD) ...

T#:52621851

Part#: 131BW001N1

Ships in 6 Business Days

$ 815.00 USD

Add to Wish List

Qty

$ 815.00 USD

Add to Wish List

BC Racing’s new adjustable spring perch (ASP) is an excellent solution for customers seeking a lowered stance, but still require the OEM electronic damping system to remain functional. Compared with conventional lowering springs, the BC Racing ASP offers ride height adjustability that seamlessly allows users more flexibility to tailor their chassis to the needs of modern suspension, performance, and style.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Suspension Parts for BMW F82 M4 S55 3.0L

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results