BMW Brakes & Brake Parts for BMW F82 M4 S55 3.0L

Rear Euro Ceramic Brake Pad Set - F2X F3X G8X

For 2020 and earlier model years without M Carbon Ceramic Brakes (S2NKA=NO)

T#:558483

Part#: EUR1656

In Stock

$ 113.99 USD

Add to Wish List

Qty

$ 113.99 USD

Add to Wish List

Turner Motorsport presents Akebono Euro Ceramic Brake Pads, harnessing innovative ceramic brake technology for superior braking performance. With decades of experience in motorsports, Akebono's ceramic brake pads offer unmatched benefits over traditional metal compound pads. The manufacturer-approved formulation ensures excellence, with advantages including reduced brake fade in hot conditions, shorter stopping distances, minimal brake dust, and significantly increased brake rotor lifespan.

Innovative Ceramic Technology: Utilizes advanced ceramic brake pad technology.
Manufacturer-Approved Formulation: Ensures unmatched compound quality.
Reduced Brake Fade: Ceramic's slower heat absorption prevents fading during heavy braking in hot conditions.
Shorter Stopping Distances: Higher co-efficient of friction enhances stopping power.
Minimal Brake Dust: Lower metal content leads to a significant reduction in brake dust.
Increased Brake Rotor Life: Drastically improves the lifespan of brake rotors.
Proven Quality: Akebono Euro brake pads used in over 90 vehicle models as original equipment.

Upgrade your BMW's braking system with Akebono Euro Ceramic Brake Pads from Turner Motorsport.

Show More Show Less

Bav Auto Wheel Hub and Rotor Grinding Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:580437

Part#: B8800132

In Stock

Sale - Save 10% $ 47.99

This product was last offered at the strikethrough price on
05-03-2026

$ 43.19 USD

Add to Wish List

Qty

Sale - Save 10%

$ 47.99

This product was last offered at the strikethrough price on
05-03-2026

$ 43.19 USD

Add to Wish List

Used to remove corrosion and ensure brake rotors, wheel spacers, etc sit flush on your hubs

BMW F8X M2, M3, M4 380mm Front Rotors

T#:11726308

Part#: A1-186

In Stock at Vendor

$ 1,350.00 USD

Add to Wish List

Qty

$ 1,350.00 USD

Add to Wish List

Two front floating rotors for your BMW F8X.

Bav Auto On-Vehicle Micro Brake Pipe Flaring Tool

10X Entries Into Our F80 M3 Sweepstakes

T#:580396

Part#: B8800083

Ships on Mar 12, 2027

$ 86.99 USD

Add to Wish List

Qty

$ 86.99 USD

Add to Wish List

This tool makes 4.75mm and 3/16 in double and bubble flares in confined spaces.

Bav Auto Brake Caliper Windback - 3/8"

10X Entries Into Our F80 M3 Sweepstakes

T#:580372

Part#: B8800050

In Stock

Sale - Save 15% $ 43.99

This product was last offered at the strikethrough price on
05-03-2026

$ 37.39 USD

Add to Wish List

Qty

Sale - Save 15%

$ 43.99

This product was last offered at the strikethrough price on
05-03-2026

$ 37.39 USD

Add to Wish List

Reversible to work clockwise and counterclockwise.

Bav Auto Brake Disc Run Out and Ball Joint Wear Gauge

10X Entries Into Our F80 M3 Sweepstakes

T#:580425

Part#: B8800118

In Stock

Sale - Save 3% $ 80.99

This product was last offered at the strikethrough price on
05-03-2026

$ 78.56 USD

Add to Wish List

Qty

Sale - Save 3%

$ 80.99

This product was last offered at the strikethrough price on
05-03-2026

$ 78.56 USD

Add to Wish List

Used to measure the wear on brake discs and ball joints.

Front 2-Piece Brake Rotors - Pair - 400mm

Allows for an easy conversion from Carbon Ceramic to Steel Rotors

T#:11268520

Part#: A1-220

In Stock at Vendor

$ 1,450.00 USD

Add to Wish List

Qty

$ 1,450.00 USD

Add to Wish List

The Girodisc system is a direct replacement iron rotor for the OEM Carbon disc, no modifications are necessary. The disc will bolt directly to the car and work with OEM calipers and pads perfectly. The central hat section of our rotor is made from strictly U.S. sourced 6061-T6 aircraft specification aluminum. The disc is made from our own proprietary cast iron, poured in the USA and machined from start to finish in house at Girodisc. The rotor utilizes a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the disc. The rotor and hat have a floating mount system, which utilizes 12 high strength alloy steel drive pins, manufactured by Girodisc in the USA to our own specifications and cadmium plated for a long lasting corrosion resistance. These pins take the load from braking actions while maintaining the axial and radial float between the hat and disc. The pins are secured by class 12.9 cap screws with hardened washers. In order to keep the rotors from making noise when cold, the pins are mounted with anti-noise spring washers on the rotor side which allow the rotor to grow with heat expansion but eliminate the rattle and noise associated with floating rotors. This float also allows the rotor to self center between the pads. Once the Girodisc system is in place, simply replace the cast iron rotor when needed.

Show More Show Less

Rear 2-Piece Brake Rotors - Pair - 380mm

Allows for an easy conversion from Carbon Ceramic to Steel Rotors

T#:11268521

Part#: A2-220

In Stock at Vendor

$ 1,400.00 USD

Add to Wish List

Qty

$ 1,400.00 USD

Add to Wish List

The Girodisc system is a direct replacement iron rotor for the OEM Carbon disc, no modifications are necessary. The disc will bolt directly to the car and work with OEM calipers and pads perfectly. The central hat section of our rotor is made from strictly U.S. sourced 6061-T6 aircraft specification aluminum. The disc is made from our own proprietary cast iron, poured in the USA and machined from start to finish in house at Girodisc. The rotor utilizes a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the disc. The rotor and hat have a floating mount system, which utilizes 12 high strength alloy steel drive pins, manufactured by Girodisc in the USA to our own specifications and cadmium plated for a long lasting corrosion resistance. These pins take the load from braking actions while maintaining the axial and radial float between the hat and disc. The pins are secured by class 12.9 cap screws with hardened washers. In order to keep the rotors from making noise when cold, the pins are mounted with anti-noise spring washers on the rotor side which allow the rotor to grow with heat expansion but eliminate the rattle and noise associated with floating rotors. This float also allows the rotor to self center between the pads. Once the Girodisc system is in place, simply replace the cast iron rotor when needed.

Show More Show Less

Bav Auto Brake Flare Wrench - 11mm x 13mm

10X Entries Into Our F80 M3 Sweepstakes

T#:580418

Part#: B8800111

In Stock

Sale - Save 20% $ 7.99

This product was last offered at the strikethrough price on
05-03-2026

$ 6.39 USD

Add to Wish List

Qty

Sale - Save 20%

$ 7.99

This product was last offered at the strikethrough price on
05-03-2026

$ 6.39 USD

Add to Wish List

We recommend not using an open ended wrench when changing out brake lines. Use a flare wrench instead. This one is an 11mm flare wrench on one side and a 13mm on the other side.