BMW Coilovers for BMW F82 M4 S55 3.0L

Ohlins Road And Track DFV Coilovers - F80/F82 M3 M4, F87 M2

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:593661

Part#: BMU MR41

In Stock

$ 3,668.99 USD

Add to Wish List

Qty

$ 3,668.99 USD

Add to Wish List

Ohlins Racing has a long history dating back to 1976 of providing premium motorcycle and automotive suspension systems to numerous racing teams, individual racers, and OE brands such as BMW Motorsport, Audi, Lamborghini. Pagani, Ducati and Kawasaki. Over time, thanks to extensive R&D, testing, and tuning, their products have evolved into some of the highest quality suspension systems in the world, providing years of flawless operation on both the street and the track. Ohlins' latest automotive suspension system, the DFV (Dual Flow Valve) Road and Track Coilover Kit, has bridged the gap between comfortable stock suspension and track focused coilover kits. These kits provide a ride that glides over typical bumps and dips in the road, all without the typical hard rattle and harsh feel of usual coilovers, and turn in tight and maintain tire grip and traction in corners significantly better than stock suspension ever could. This is all thanks to the spring rate chosen and Ohlins and their signature Dual Flow Valve. The DFV maintains comfort and agility by giving the same characteristics for both rebound and compression, allowing the wheel and tire to maintain constant contact with the road/track for maximum control. The Dual Flow Valve works by controlling shock fluid flow based on resistance and impact velocity. This is controlled in both compression and rebound, giving the quick shock operation that helps maintain traction. At low shaft travel speeds, oil flows mostly through the shaft jet bleed. At higher shaft speeds, oil flows mostly through the compression/rebound ports in the piston. At very high shaft speeds, or during sudden accelerations from potholes or large bumps in the road, oil can then escape through the ports in the DFV, absorbing a large amount of energy that would otherwise throw off the balance and control of the vehicle and keeping the tire planted firmly on the ground. With all three compression and rebound ports working together according to pressure and shaft speed, the result is the notorious premium suspension feel that only Ohlins can offer. In addition to managing the rebound and compression control, coilovers must also properly address heat changes in the shock oil. As the shock is pushed harder and longer, the oil quickly heats up due to friction and compression, and the oils flow characteristics change. The hotter the oil is, the easier it is for it to travel through ports and valves. To prevent this typical fade in control, Ohlins has implemented a temperature controlled needle bleed valve system that will expand as temperatures rise, slowly increasing restriction in the fluids flow through the valve gap. This produces a consistent dampening rate that maintains the vehicle's suspension characteristics lap after lap, turn after turn, no matter how hard you push your suspension's capabilities. Features: DFV (Dual Flow Valve) Adjustable ride-height Fully rebuildable Corrosion salt spray tested (ISO 9227) Includes hardware and installation instructions 2 year Limited Warranty Specs: Recommended Front Spring Rating: 515 lbs/in ( 9 k/mm) Recommended Rear Spring Rating: 1087 lbs/in ( 19 k/mm) *Now available are optional EDC Cancellation Modules that will prevent any lights or issues with suspension control systems. Turner Motorsport reccommends purchasing these in addition to the suspension kit to get the most out of your Ohlins suspension system. Ohlins Racing has a long history dating back to 1976 of providing premium motorcycle and automotive suspension systems to numerous racing teams, individual racers, and OE brands such as BMW Motorsport, Audi, Lamborghini. Pagani, Ducati and Kawasaki. Over time, thanks to extensive R&D, testing, and tuning, their products have evolved into some of the highest quality suspension systems in the world, providing years of flawless operation on both the street and the track. Ohlins' latest automotive suspension system, the DFV (Dual Flow Valve) Road and Track Coilover Kit, has bridged the gap between comfortable stock suspension and track focused coilover kits. These kits provide a ride that glides over typical bumps and dips in the road, all without the typical hard rattle and harsh feel of usual coilovers, and turn in tight and maintain tire grip and traction in corners significantly better than stock suspension ever could. This is all thanks to the spring rate chosen and Ohlins and their signature Dual Flow Valve. The DFV maintains comfort and agility by giving the same characteristics for both rebound and compression, allowing the wheel and tire to maintain constant contact with the road/track for maximum control. The Dual Flow Valve works by controlling shock fluid flow based on resistance and impact velocity. This is controlled in both compression and rebound, giving the quick shock operation that helps maintain traction. At low shaft travel speeds, oil flows mostly through the shaft jet bleed. At higher shaft speeds, oil flows mostly through the compression/rebound ports in the piston. At very high shaft speeds, or during sudden accelerations from potholes or large bumps in the road, oil can then escape through the ports in the DFV, absorbing a large amount of energy that would otherwise throw off the balance and control of the vehicle and keeping the tire planted firmly on the ground. With all three compression and rebound ports working together according to pressure and shaft speed, the result is the notorious premium suspension feel that only Ohlins can offer. In addition to managing the rebound and compression control, coilovers must also properly address heat changes in the shock oil. As the shock is pushed harder and longer, the oil quickly heats up due to friction and compression, and the oils flow characteristics change. The hotter the oil is, the easier it is for it to travel through ports and valves. To prevent this typical fade in control, Ohlins has implemented a temperature controlled needle bleed valve system that will expand as temperatures rise, slowly increasing restriction in the fluids flow through the valve gap. This produces a consistent dampening rate that maintains the vehicle's suspension characteristics lap after lap, turn after turn, no matter how hard you push your suspension's capabilities. Features: DFV (Dual Flow Valve) Adjustable ride-height Fully rebuildable Corrosion salt spray tested (ISO 9227) Includes hardware and installation instructions 2 year Limited Warranty Specs: Recommended Front Spring Rating: 515 lbs/in ( 9 k/mm) Recommended Rear Spring Rating: 1087 lbs/in ( 19 k/mm) *Now available are optional EDC Cancellation Modules that will prevent any lights or issues with suspension control systems. Turner Motorsport recommends purchasing these in addition to the suspension kit to get the most out of your Ohlins suspension system. Fits the following BMWs: 2013+ F80/82 BMW M3 M4 2016+ F87 BMW M2

Show More Show Less

Ohlins EDC Cancellation Kit - BMW M3 F80, M4 F82

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:405066

Part#: 35020-02

In Stock at Vendor

$ 655.99 USD

Add to Wish List

Qty

$ 655.99 USD

Add to Wish List

The öhlins EDC Cancellation Kit for Road & Track deactivates control lamps and error reports when electronically adjustable OEM suspension is replaced by a mechanical system. The cancellation kit is just plugged into the original suspension controls. No further programming is needed.

Show More Show Less

F8X Ohlins X Turner Motorsport Street-Performance Coilover System ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:8294107

Part#: BMU MW40S1

Ships on Jun 25, 2026

$ 3,899.99 USD

Add to Wish List

Qty

$ 3,899.99 USD

Add to Wish List

Turner Motorsport has teamed up with Ohlins to bring the ultimate street coilover to the F8X community. Working alongside the engineers at Ohlins, we have developed a special recipe derived from the standard Ohlins DFV Road and Track kit. This Street-Performance system includes modified spring rates and valving for a more streetable coilover experience. If you are looking to enjoy your S55 car to the fullest, but don't want to forgo any ride quality, these are the perfect option.

Show More Show Less

BC Racing BR Series Coilover Suspension Kit - 5-Bolt Top Mounts - 201...

For vehicles with 5-Bolt Top Mounts & EDC Suspension

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For vehicles with 5-Bolt Mounts and EDC

T#:555818

Part#: I-68-BR

Ships in 2 Business Days

$ 1,195.00 USD

Add to Wish List

Qty

$ 1,195.00 USD

Add to Wish List

BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.

Show More Show Less

Bilstein B16 DampTronic Coilover Kit - F80 M3, F82/83 M4

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:555362

Part#: 49-246988

Ships in 2 Business Days

34% off MSRP $ 5,576.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 3,699.00 USD

Add to Wish List

Qty

34% off MSRP

$ 5,576.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 3,699.00 USD

Add to Wish List

All of the active features of the factory electronic suspension, along with the factory controls, will be retained with the installation of this kit. These kits offer monotube performance dampers with matched springs that are tuned for each specific application. The zinc coated and threaded body design will give you the flexibility to find the perfect ride height setting for your intended use while providing unsurpassed protection against the harshest road elements. B16 (DampTronic) suspension kits are made in Germany and feature technology tested on the famed Nurburgring

Show More Show Less

KW V3 Series Coilover Kit - Adjustable Damping - F80/F82 M3/M4 (With ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:349009

Part#: 352200AP

In Stock at Vendor

$ 3,964.00 USD

Add to Wish List

Qty

$ 3,964.00 USD

Add to Wish List

KW was founded in 1995 and at the beginning it only existed of three employees and had an operating area that was rather small. Today, KW is represented all over the world and has approximately 200 employees in five locations. Currently, KW is the epitome for premium products in car tuning and automobile refinement. KW offers its customers the largest suspension program world-wide and each component is tested using their state-of-the-art seven-post drive dynamics test.

Show More Show Less

Bilstein B16 PSS10 Coil Over Suspension - F80 M3, F82 M4, F87 M2 ...

Fits vehicles without electronic (EDC/Adaptive) suspension

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:215352

Part#: 48-244091

In Stock at Vendor

34% off MSRP $ 3,755.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,491.00 USD

Add to Wish List

Qty

34% off MSRP

$ 3,755.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,491.00 USD

Add to Wish List

The B16 PSS10 coilovers offer a stiffer spring rate than stock and a lower ride height for less bodyroll and better handling. These are among the easiest coil over kits on the market - no special mounts required (works with stock mounts and sway bar links), larger adjustment knob allows for easy shock damping changes, and coil over spanner wrenches included for easy height changes. Bilstein backs up their technology with a limited lifetime warranty. TUV approved for fitment, safety, and quality!

Show More Show Less

BC Racing BR Series Coilover Suspension Kit - 3-Bolt Top Mount - BMW ...

For 2014-2015 Models with 3-Bolt Front Strut Mounts and EDC Suspension

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:555827

Part#: I-49-BR

In Stock

$ 1,195.00 USD

Add to Wish List

Qty

$ 1,195.00 USD

Add to Wish List

BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.

Show More Show Less

Bilstein Clubsport Coilover System - F80/F82/F83 M3/M4 (3-Bolt Mount ...

For vehicles without EDC/Adaptive suspension and with a 3 hole front upper mount

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:3327195

Part#: 48-256292

Ships in 4 Business Days

$ 4,759.00 USD

Add to Wish List

Qty

$ 4,759.00 USD

Add to Wish List

The Bilstein Clubsport is a high-end coilover suspension kit for both road and race track. The best thing about it: the suspension setting can be adjusted by means of premium color-coded aluminum motorsport adjustment wheels using rebound and compression force independently of each other noticeably, quickly, simply and precisely.

Show More Show Less

H&R Street Performance Coilovers - F80 F82

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!

T#:599733

Part#: 50478

Ships in 4 Business Days

$ 2,112.99 USD

Add to Wish List

Qty

$ 2,112.99 USD

Add to Wish List

H&R Street Performance Coil Overs are the perfect suspension solution for discerning drivers—from daily drivers to serious tuners—who can appreciate the awesome handling and superb ride comfort. Each coilover shock is custom valved to work in conjunction with a precision-engineered progressive rate spring, creating a finely tuned suspension system. The fully threaded shock body allows for adjustable vehicle height. This feature helps balance vehicle weight, resulting in a lower center of gravity and improved performance and control.

Show More Show Less

BC Racing BR Series Extreme Low Coilover Suspension Kit - 5-Bolt Top ...

For vehicles with 5-Bolt Top Mounts & EDC Suspension

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For vehicles with 5-Bolt Mounts and EDC

T#:568069

Part#: I-68E-BR

Ships on Jul 24, 2026

$ 1,345.00 USD

Add to Wish List

Qty

$ 1,345.00 USD

Add to Wish List

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you. BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop, up to 5". To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.

Show More Show Less

TC Kline Racing Double Adjustable Street/Track Coilover Kit - 3 Bolt ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
More aggressive for track setups.

T#:400851

Part#: TCKF8XDBLKIT

Ships in 3 Business Days

$ 3,497.99 USD

Add to Wish List

Qty

$ 3,497.99 USD

Add to Wish List

Lifetime warranty on street driven cars! TC Kline's coilover kits feature proprietary TC Kline Racing Koni dampers, camber plates, and recommended, track proven spring rates. This kit includes 400#F/700#R springs .

Show More Show Less

TC Kline Racing Double Adjustable Street/Track Coilover Kit - Race - ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:1331977

Part#: TCKF8XSINGLEDBL2

Ships in 3 Business Days

$ 3,095.99 USD

Add to Wish List

Qty

$ 3,095.99 USD

Add to Wish List

This TC Kline Coilover kit features: Proprietary, single adjustable front and double adjustable rear Koni dampers Camber plates Recommended, track-proven spring rates: 400#F / 700#R Looking for different spring rates? Give us a call - we're happy to help. Designed and tested on the street and the track - TC Kline Racing Coilovers are found in hundreds of competition vehicles and daily-driven vehicles alike. Precisely-valved, rebound-adjustable, Koni shocks are matched with TC Kline's VVS high tensile alloy springs. TC Kline's VVS springs feature different free heights - designed to be interchangeable without having to reset ride height. This coilover system is built to meet the evolving demands you'll put on your car - adjustable camber, adjustable rebound, and replaceable springs (which are readily available) all allow to compensate for changes in driving habits, tire selection, track and road surfaces, and of course, a desire for a firmer or softer ride!

Show More Show Less

KW DDC Coilover Kit - DDC Plug & Play - F80 M3, F82 M4

For vehicles with EDC

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:555168

Part#: 39020039

In Stock at Vendor

$ 5,654.00 USD

Add to Wish List

Qty

$ 5,654.00 USD

Add to Wish List

Today, more and more premium vehicles are being fitted with an electronically adaptive suspension system. Before KW DDC Plug & Play coilovers were introduced to the market, you often had to make compromises when customizing your suspension lowering, and often had to eliminate the active electronic control system and comfort features that you had paid extra for. With the adaptive KW DDC Plug & Play coilover suspensions there are no compromises to be made and you can combine the control of your standard damper system with a seamless suspension lowering and the driving dynamics tuned by KW suspensions experienced engineers. During installation, the factory electronic struts are simply replaced by KW “inox-line” stainless steel coilover struts and the adaptive KW dampers are connected to the on-board electronics using your vehicle's original plugs. Fitting a KW DDC Plug & Play coilover suspension requires no further modifications. The standard dampers can simply be replaced with the KW DDC (Dynamic Damping Control) coilover kit. The existing controls and the button installed in the vehicle interior for the operation of the damper control will now operate the KW DDC Plug & Play coilovers. For the first time, the KW DDC Plug & Play coilover kit combines the advantages of a KW coilover suspension with the convenience of the standard electronic damper controls. At the push of a button, the driver can choose between the Comfort, Normal and Sport setup optimized for the KW coilover suspension. In addition, the KW coilover suspension allows individual ride height adjustability within the tested adjustment range. Our original equipment quality suspension technology is compatible with various vehicle manufacturers. As a result, the adaptive KW DDC suspension is instantly recognized by the on-board electronics. So all the displays and controls of your factory vehicle remain fully functional but you get a completely new driving experience. Height Adjustment Range: 0.6" to 1.6" Front 0.6" to 1.6" Rear

Show More Show Less

TC Kline Racing Double Adjustable Street/Track Coilover Kit - Street ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:594691

Part#: TCKF8XSINGLEDBL

Ships in 7 Business Days

$ 3,095.99 USD

Add to Wish List

Qty

$ 3,095.99 USD

Add to Wish List

This TC Kline coilover kit features: Proprietary, single adjustable front and double adjustable rear Koni dampers Camber plates Recommended, track proven spring rates: 300#F/600#R Looking for different spring rates? Give us a call - we're happy to help. Designed and tested on the street and the track - TC Kline Racing Coilovers are found in hundreds of competition vehicles and daily-driven vehicles alike. Precisely-valved, rebound-adjustable, Koni shocks are matched with TC Kline's VVS high tensile alloy springs. TC Kline's VVS springs feature different free heights - designed to be interchangeable without having to reset ride height. This coilover system is built to meet the evolving demands you'll put on your car - adjustable camber, adjustable rebound, and replaceable springs (which are readily available) all allow to compensate for changes in driving habits, tire selection, track and road surfaces, and of course, a desire for a firmer or softer ride!

Show More Show Less

BC Racing DS Series Coilover Suspension Kit - 5-Bolt Top Mounts - 201...

For vehicles with 5-Bolt Top Mounts & EDC Suspension

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:598299

Part#: I-68-DS

Back Ordered

$ 1,395.00 USD

Add to Wish List

Qty

$ 1,395.00 USD

Add to Wish List

The DS series from BC racing offers increased control and feedback for those looking to achieve the best driving experience possible. Digressive Valving means the shock is firmer at low speed, while transitioning to a softer and more linear feel as (shaft) speed increases. This leads to a much more planted and controlled feeling in the chassis, increased feedback through the wheel, and a slight drop in passenger comfort. Swift Springs are available upon request with your choice of rates and matched or custom valving.

Show More Show Less

BC Racing DS Series Coilover Suspension Kit - 3-Bolt Top Mount - BMW ...

For 2014-2015 Models with 3-Bolt Front Strut Mounts and EDC Suspension

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:598295

Part#: I-49-DS

Back Ordered

$ 1,395.00 USD

Add to Wish List

Qty

$ 1,395.00 USD

Add to Wish List

The DS series from BC racing offers increased control and feedback for those looking to achieve the best driving experience possible. Digressive Valving means the shock is firmer at low speed, while transitioning to a softer and more linear feel as (shaft) speed increases. This leads to a much more planted and controlled feeling in the chassis, increased feedback through the wheel, and a slight drop in passenger comfort. Swift Springs are available upon request with your choice of rates and matched or custom valving.

Show More Show Less

BR Series Coilover Suspension Kit With Swift Springs Upgrade ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For vehicles with 5-Bolt Mounts and EDC*

T#:585960

Part#: I-68-BR-SW

Ships on Jul 24, 2026

$ 1,715.00 USD

Add to Wish List

Qty

$ 1,715.00 USD

Add to Wish List

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you. BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components. The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below. Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically. The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability. All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection. For vehicles with 5-Bolt mounts and EDC* (*Requires EDC Elimination kit. See T#405066) Specs and Features: 7k Front & 14k Rear Spring Rate Linear front & Linear rear springs Valved specifically to spring style and rate Camber Plate Front Mounts Aluminum and Rubber Rear Mounts Black Powder Coated Components All OE style brackets and mounting for perfect fit 30 Levels of Simultaneous Compression and Rebound Dampening 2 inch minimum and 3+ Inches of total potential drop Great for Track, Street, and any other conditions

Show More Show Less

BC Racing BR Series Extreme Low Coilover Kit - 3-Bolt Top Mount - BMW...

For 2014-2015 Models with 3-Bolt Front Strut Mounts and EDC Suspension

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:568076

Part#: I-49E-BR

Ships on Jul 24, 2026

$ 1,345.00 USD

Add to Wish List

Qty

$ 1,345.00 USD

Add to Wish List

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you. BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop, up to 5". To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months.

Show More Show Less

Bilstein B12 Pro Suspension Kit

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:13924891

Part#: 46-281784

Ships in 4 Business Days

$ 2,569.00 USD

Add to Wish List

Qty

$ 2,569.00 USD

Add to Wish List

Bilstein's B12 suspension kit is the go-to option for a sporty suspension upgrade. Developed specifically for your vehicle, the B12 is engineered for ease of installation and tailored to the ride dynamics of your suspension. The spring compression height and motion ratio remain the same, just like your original suspension geometry. This means that ground clearance remains the same and nothing grinds or rubs!

Show More Show Less

KW 2-Way Coilover Kit - Clubsport - F80 M3, F82 M4 - 3 Bolt Mount ...

For Vehicles produced before 01/15 production date with EDC

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:206127

Part#: 352208AN

Back Ordered

$ 5,294.00 USD

Add to Wish List

Qty

$ 5,294.00 USD

Add to Wish List

Adjustable Rebound & Compression Damping, Front Camber Plates & Stiffer Springs

Must have 3 Bolt Upper Strut Mount

KW Clubsport coilovers was developed for F80 M3 & F82 M4 owners who demand a better handling car when participating in track day events, but also require a setup that could be used every day. The Clubsport was specifically designed for the Nordschleife using track day tires. By using the adjustable camber mounts, the suspension geometry can be adjusted to the requirements of tires and the intended use. The mentioned adjustment options combined with the independently adjustable rebound and compression damping technology allow a suspension setup according to the vehicle load, tire characteristics and different track conditions. KW Clubsport meets every demand regarding a coilover for the usage on the road and the race track.

KW Clubsport suspension kits are independently adjustable in compression and rebound and include high performance racing springs. Racing front camber plates are included for further performance. KW Clubsport guarantees excellent handling, best performance, highest agility and fantastic lap times.

Performance setup for the racetrack

Height adjustable coilovers - Front - 15-40mm, Rear - 20-45mm

Dampers in compression & rebound forces independently adjustable

Use of high performance linear race springs: Front 575 lbs/inch, Rear 800 lbs/inch.

Stainless steel technology "inox-line"

Includes front camber plate mounts
Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.
EDC must be disabled using the KW EDC Cancellation Kit or a similar unit. This is a direct install for cars without the factory EDC.

Choose 2-way (Rebound/Compression) adjustable shocks or 3-way(Rebound/Low-Speed Compression/High-Speed Compression) from options below.

KW Clubsport Development and Testing

This item fits the following BMWs:
2015-1/2015 F80 BMW M3
2015-1/2015 F82 BMW M4

Show More Show Less

KW V4 Series Coilover Kit - F80 M3, F82 M4 (W/O EDC)

For production date from 01/2015+ with 5 bolt front top mount

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:587683

Part#: 3A7200BB

Back Ordered

$ 6,294.00

This product was last offered at the strikethrough price on
02-08-2026

$ 6,014.00 USD

Add to Wish List

Qty

$ 6,014.00 USD

Add to Wish List

**ONLY FOR VEHICLES WITH STANDARD SUSPENSION (WITHOUT EDC/ADAPTIVE SUSPENSION)** The KW Variant 4 coilover injects top-level motorsport design into a coilover that is fully useable on the street in a day to day situation. Combining years of race-winning design and engineering with real-world testing, KW has introduced a line of coilovers that checks all the boxes and then some. If you are looking for maximum adjustability, reliability, and comfort then this is the kit for you. Lowering of 15-40mm Front and 15-40mm Rear. Spring Rate of 285lbs/inch Front and 685lbs/inch Rear.

Show More Show Less

BC Racing ER Series Coilover Suspension Kit - 3-Bolt Top Mount - BMW ...

For 2014-2015 Models with 3-Bolt Front Strut Mounts and EDC Suspension

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:4347104

Part#: I-49-ER

Back Ordered

$ 1,935.00 USD

Add to Wish List

Qty

$ 1,935.00 USD

Add to Wish List

The ER Series coilovers bring with them the high quality and unique features seen on the BR and RM type but have the additional benefit of external reservoirs and the ability to allow the end user to individually adjust and set compression and rebound damping rates. By separating the adjustment for damping compression and rebound the ER Series allows you to dial the vehicle in to your exact needs. When braking hard whilst approaching a corner you want the car to transfer weight to the front tires to maximize grip for the braking effort and also to allow you to trail brake into the corner without the car understeering. Ride height adjustment: Ride height is determined by the position of the coil over bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment. Because ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Mono-Tube Damper Linear Twin-Piston Design Height Adjustment Independent Of Spring Compression 30-Clicks Of Compression Adjustment Via The External Reservoirs 30-Clicks Of Rebound Adjustment From The Top Of The Damper Front And Rear Camber Plates Standard On All Applicable Kits Front And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply Custom Spring Rates And Swift Spring Compatible Custom Valved To Match The Drivers Requested Spring Rates Swift Spring Upgrade Available On Most Applications 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES ON ALL NEW ORDERS 4-8 WEEKS

Show More Show Less

BC Racing ER Series Coilover Suspension Kit - 5-Bolt Top Mounts - 201...

For vehicles with 5-Bolt Top Mounts & EDC Suspension

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:4347105

Part#: I-68-ER

Back Ordered

$ 1,935.00 USD

Add to Wish List

Qty

$ 1,935.00 USD

Add to Wish List

The ER Series coilovers bring with them the high quality and unique features seen on the BR and RM type but have the additional benefit of external reservoirs and the ability to allow the end user to individually adjust and set compression and rebound damping rates. By separating the adjustment for damping compression and rebound the ER Series allows you to dial the vehicle in to your exact needs. When braking hard whilst approaching a corner you want the car to transfer weight to the front tires to maximize grip for the braking effort and also to allow you to trail brake into the corner without the car understeering. Ride height adjustment: Ride height is determined by the position of the coil over bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment. Because ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Mono-Tube Damper Linear Twin-Piston Design Height Adjustment Independent Of Spring Compression 30-Clicks Of Compression Adjustment Via The External Reservoirs 30-Clicks Of Rebound Adjustment From The Top Of The Damper Front And Rear Camber Plates Standard On All Applicable Kits Front And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply Custom Spring Rates And Swift Spring Compatible Custom Valved To Match The Drivers Requested Spring Rates Swift Spring Upgrade Available On Most Applications 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES ON ALL NEW ORDERS 4-8 WEEKS

Show More Show Less

BC Racing RM Series Coilover Suspension Kit - 5-Bolt Top Mounts - 201...

For vehicles with 5-Bolt Top Mounts & EDC Suspension

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:47439395

Part#: I-68-RM

Back Ordered

$ 1,515.00 USD

Add to Wish List

Qty

$ 1,515.00 USD

Add to Wish List

The BC Racing RM Series Coilover System uses a mono-tube inverted damper in the front and rear of vehicles that use McPherson style OEM strut suspension. On vehicles that use front struts only, BC Racing provides an inverted front strut and then provides an upright BR Series damper for the rear. Inverted dampers are useful in decreasing unsprung weight by moving the greatest mass of the strut to the top where it connects to the sprung weight of the chassis, where weight can be more easily shaved. The BC Racing RM Series Coilover System uses a much larger inverted piston shaft that can handle higher lateral loads for longer periods of time without fatigue. These higher lateral loads are only prevalent on McPherson style strut suspension, not on Double A-Arm vehicles.

Show More Show Less

BC Racing HM Series Coilover Suspension Kit - 5-Bolt Top Mounts - 201...

For vehicles with 5-Bolt Top Mounts & EDC Suspension

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:47439396

Part#: I-68-HM

Back Ordered

$ 2,565.00 USD

Add to Wish List

Qty

$ 2,565.00 USD

Add to Wish List

The BC Racing HM Series Coilover System gets its great qualities from a combination of two previous BC Racing Coilover Systems - the RM Series and ER Series. The HM Series uses an inverted mono-tube damper, just like the RM Series, but adds the independent compression and rebound adjustment of the ER Series. Each HM Series Coilover System uses inverted mono-tube dampers front and rear on McPherson strut vehicles with steel braided lines leading from the top of the damper to the external reservoirs. The external reservoirs allow for a higher oil capacity with the added benefit of increased thermal dissipation, they also house the secondary damping piston. For Subarus and other McPherson suspension vehicles that are heavily tracked, the BC Racing HM Series Suspension System is definitely worth checking out!

Show More Show Less

BC Racing HM Series Coilover Suspension Kit - 3-Bolt Top Mount - BMW ...

For 2014-2015 Models with 3-Bolt Front Strut Mounts and EDC Suspension

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:47439437

Part#: I-49-HM

Back Ordered

$ 2,565.00 USD

Add to Wish List

Qty

$ 2,565.00 USD

Add to Wish List

The BC Racing HM Series Coilover System gets its great qualities from a combination of two previous BC Racing Coilover Systems - the RM Series and ER Series. The HM Series uses an inverted mono-tube damper, just like the RM Series, but adds the independent compression and rebound adjustment of the ER Series. Each HM Series Coilover System uses inverted mono-tube dampers front and rear on McPherson strut vehicles with steel braided lines leading from the top of the damper to the external reservoirs. The external reservoirs allow for a higher oil capacity with the added benefit of increased thermal dissipation, they also house the secondary damping piston. For Subarus and other McPherson suspension vehicles that are heavily tracked, the BC Racing HM Series Suspension System is definitely worth checking out!

Show More Show Less

BC Racing RM Series Coilover Suspension Kit - 3-Bolt Top Mount - BMW ...

For 2014-2015 Models with 3-Bolt Front Strut Mounts and EDC Suspension

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:47439436

Part#: I-49-RM

Back Ordered

$ 1,515.00 USD

Add to Wish List

Qty

$ 1,515.00 USD

Add to Wish List

The BC Racing RM Series Coilover System uses a mono-tube inverted damper in the front and rear of vehicles that use McPherson style OEM strut suspension. On vehicles that use front struts only, BC Racing provides an inverted front strut and then provides an upright BR Series damper for the rear. Inverted dampers are useful in decreasing unsprung weight by moving the greatest mass of the strut to the top where it connects to the sprung weight of the chassis, where weight can be more easily shaved. The BC Racing RM Series Coilover System uses a much larger inverted piston shaft that can handle higher lateral loads for longer periods of time without fatigue. These higher lateral loads are only prevalent on McPherson style strut suspension, not on Double A-Arm vehicles.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Coilovers for BMW F82 M4 S55 3.0L

Sub-Categories

Ohlins Road And Track DFV Coilovers - F80/F82 M3 M4, F87 M2

Ohlins EDC Cancellation Kit - BMW M3 F80, M4 F82

F8X Ohlins X Turner Motorsport Street-Performance Coilover System ...

BC Racing BR Series Coilover Suspension Kit - 5-Bolt Top Mounts - 201...

Bilstein B16 DampTronic Coilover Kit - F80 M3, F82/83 M4

KW V3 Series Coilover Kit - Adjustable Damping - F80/F82 M3/M4 (With ...

Bilstein B16 PSS10 Coil Over Suspension - F80 M3, F82 M4, F87 M2 ...

BC Racing BR Series Coilover Suspension Kit - 3-Bolt Top Mount - BMW ...

Bilstein Clubsport Coilover System - F80/F82/F83 M3/M4 (3-Bolt Mount ...

H&R Street Performance Coilovers - F80 F82

BC Racing BR Series Extreme Low Coilover Suspension Kit - 5-Bolt Top ...

TC Kline Racing Double Adjustable Street/Track Coilover Kit - 3 Bolt ...

TC Kline Racing Double Adjustable Street/Track Coilover Kit - Race - ...

KW DDC Coilover Kit - DDC Plug & Play - F80 M3, F82 M4

TC Kline Racing Double Adjustable Street/Track Coilover Kit - Street ...

BC Racing DS Series Coilover Suspension Kit - 5-Bolt Top Mounts - 201...

BC Racing DS Series Coilover Suspension Kit - 3-Bolt Top Mount - BMW ...

BR Series Coilover Suspension Kit With Swift Springs Upgrade ...

BC Racing BR Series Extreme Low Coilover Kit - 3-Bolt Top Mount - BMW...

Bilstein B12 Pro Suspension Kit

KW 2-Way Coilover Kit - Clubsport - F80 M3, F82 M4 - 3 Bolt Mount ...

KW V4 Series Coilover Kit - F80 M3, F82 M4 (W/O EDC)

BC Racing ER Series Coilover Suspension Kit - 3-Bolt Top Mount - BMW ...

BC Racing ER Series Coilover Suspension Kit - 5-Bolt Top Mounts - 201...

BC Racing RM Series Coilover Suspension Kit - 5-Bolt Top Mounts - 201...

BC Racing HM Series Coilover Suspension Kit - 5-Bolt Top Mounts - 201...

BC Racing HM Series Coilover Suspension Kit - 3-Bolt Top Mount - BMW ...

BC Racing RM Series Coilover Suspension Kit - 3-Bolt Top Mount - BMW ...

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Narrow Results