BMW Intake Parts for BMW F82 M4 S55 3.0L

BMW S55 Open Intake

10X Entries Into Our F80 M3 Sweepstakes

T#:27138564

Part#: 023216TMS019KT1

In Stock

Sale - Save 20% $ 894.99

This product was last offered at the strikethrough price on
06-14-2026

$ 715.99 USD

Add to Wish List

Qty

Sale - Save 20%

$ 894.99

This product was last offered at the strikethrough price on
06-14-2026

$ 715.99 USD

Add to Wish List

BMW S55 Open Intake offers a substantial upgrade from the factory M3/M4 intake system, enhancing both performance and sound. Designed for BMW enthusiasts and car aficionados, this intake system provides improved airflow while seamlessly integrating with OEM inlet ducting and stock mounting locations. The intake features aluminum inlet pipes, which are more cost-effective compared to carbon fiber alternatives but still deliver excellent performance.

Features and Benefits:

Improved Airflow: Designed to enhance intake noise and overall performance.
Seamless Fit: Integrates perfectly with OEM inlet ducting and stock mounting locations.
Aluminum Construction: Provides a lower-cost alternative to carbon fiber while maintaining durability.
Precise MAF Scaling: Ensures correct air-fuel ratios by matching factory MAF scaling.
High-Quality Components: Includes 6061-T6 black anodized aluminum MAF sensor flange and vacuum line port.
Effective Heat Shields: One-piece aluminum design with wrinkle black powder coating and pre-cut gold heat tape to protect against heat.
High-Flow Air Filters: Conical filters made from 8-ply oiled cotton gauze with a bellmouth flange to reduce turbulence and maximize airflow.

Note: Photos may show the carbon fiber version; you will receive black powder-coated aluminum inlet pipes.

This product is not for sale or use in California on any pollution-controlled vehicle per the California Air Resources Board regulations.

Show More Show Less

3.5 BAR MAP Sensor - 13627843531

10X Entries Into Our F80 M3 Sweepstakes

T#:36710101

Part#: 13627843531

Ships in 8 Business Days

Sale - Save 10% $ 76.99

This product was last offered at the strikethrough price on
10-07-2026

$ 69.29 USD

Add to Wish List

Qty

Sale - Save 10%

$ 76.99

This product was last offered at the strikethrough price on
10-07-2026

$ 69.29 USD

Add to Wish List

The Manifold Absolute Pressure (MAP) sensor plays a critical role in engine performance by providing essential data to the engine control unit (ECU). This data helps the ECU determine the optimal fuel curve for efficient combustion. A faulty MAP sensor can lead to improper fuel delivery, causing the engine to run rich or lean and resulting in reduced performance or drivability issues.

Replace your MAP sensor with this high-quality unit to ensure your engine operates at its full potential.

Note for N54 applications: An adapter harness (ES#3969322) is required. This TMAP sensor is ideal for high-boost setups commonly used with the N54 engine platform.

Show More Show Less

BMW F30 E9X TMAP Sensors & PNP Adapters

T#:583821

Part#: 3.5 BAR TMAP

In Stock

$ 32.99 USD

Add to Wish List

Qty

$ 32.99 USD

Add to Wish List

JB4 3.5 bar plug and play TMAP adapters

Burger Motorsports 3.5 Bar TMAP Sensor & 32" Extension Harness - N54 ...

T#:28504212

Part#: BMS35TMAP-32

Back Ordered

$ 179.00 USD

Add to Wish List

Qty

$ 179.00 USD

Add to Wish List

Use these plug-and-play adapters to quickly adapt a 3.5 BAR TMAP sensor to your N54/N55 BMW, raising the boost maximum boost range from 20psi factory up to 36psi for the 3.5 bar. For most applications the 3.5 BAR adapter is suggested which requires OEM BMW sensor part number: 13627843531.

Show More Show Less

Air Pressure Sensor

10X Entries Into Our F80 M3 Sweepstakes

T#:27105157

Part#: 13627599042

In Stock

Sale - Save 18% $ 56.99

This product was last offered at the strikethrough price on
05-03-2026

$ 46.74 USD

Add to Wish List

Qty

Sale - Save 18%

$ 56.99

This product was last offered at the strikethrough price on
05-03-2026

$ 46.74 USD

Add to Wish List

Burger Motorsports 2013+ TypeB 4BAR Adapter - F2X F3X N54 N55 S55 ...

T#:599637

Part#: TYPEB4BARADAPTER

Back Ordered

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

Use these plug and play adapters to quickly adapt a 4bar TMAP sensor to your N54/N55/S55 BMW, raising the boost maximum boost range from 20psi factory up to 43psi. For very high boost applications, this 4 BAR adapter can be used which requires Bosch 4 BAR sensor (Part # 281002576). SENSOR NOT INCLUDED, Please see T#587716

Show More Show Less

Autotecknic Dry Carbon Fiber Intake Air Duct - F80 M3 / F82/ F83 M4 ...

T#:21407051

Part#: ATK-BM-0021-CF

Ships in 8 Business Days

$ 180.00 USD

Add to Wish List

Qty

$ 180.00 USD

Add to Wish List

Designed to scoop air straight into the intake providing your engine with more cool air and resulting in better performance, this Autotecknic dry carbon air duct is a no-brainer for your car. Not only does it provide you with better performance, but you also get a subtle but more aggressive look on your M3/M4! Dry carbon fiber's name comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold and then into a sealed autoclave to cure properly. This method creates the least amount of waste and forms a lighter version of carbon than the “wet” method. The autoclave vacuuming process of making dry carbon means fewer pinholes and virtually no air pockets in the carbon. Dry carbon is the highest-quality version of carbon fiber products that are produced.

Show More Show Less

O-Ring

T#:58198074

Part#: 13717568031

Ships in 2 Business Days

$ 6.99 USD

Add to Wish List

Qty

$ 6.99 USD

Add to Wish List

Vacuum Pump Sprocket

10X Entries Into Our F80 M3 Sweepstakes

T#:26305068

Part#: 11417516128

Special Order: No Guaranteed ETA

Sale - Save 21% $ 26.99

This product was last offered at the strikethrough price on
05-03-2026

$ 21.21 USD

Add to Wish List

Qty

Sale - Save 21%

$ 26.99

This product was last offered at the strikethrough price on
05-03-2026

$ 21.21 USD

Add to Wish List

BMS Billet Water/Methanol Injection Tank Cap With Safety Check Valve ...

T#:20815185

Part#: BMSWMITC

In Stock

$ 59.00 USD

Add to Wish List

Qty

$ 59.00 USD

Add to Wish List

The Burger Motorsports custom billet Water/Methanol Injection (WMI) cap includes an integrated heavy-duty check valve to let much-needed air in and prevent dangerous WMI vapor/fumes and liquid from getting out! Each cap is CNC machined in the USA from a solid block of billet aluminum, engraved with the BMS logo, and anodized blue for protection. Check valve piston must be lightly lubricated if tank shows signs of vacuum. One drop of penetrating oil or motor oil in the top will keep the check valve operational. Features and Benefits Integrated heavy-duty check valve lets air in but not out Specifically designed to prevent evaporation Keeps vapors inside the tank Made from a solid block of billet aluminum Blue anodizing for corrosion protection Exaggerated grips for easy removal Integrated heavy-duty o-ring Made in the USA

Show More Show Less

1 Gallon Methanol Tank - Clear/White

T#:558165

Part#: 1G-MT-CL

In Stock

$ 30.00 USD

Add to Wish List

Qty

$ 30.00 USD

Add to Wish List

The least expensive option available from BMS, this 1 gallon tank is compact and flexible allowing for a wide range of mounting on any flat vertical surface in the trunk. The tank is clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a compression pump feed fitting Made in USA Tank dimensions: L 11" x W 4.5 x H 9"

Show More Show Less

BMS DDP5800 Water/Methanol Injection Pump

T#:20815186

Part#: BMSDDP5800

Ships in 1 Business Day

Starting at $ 120.00 USD

Add to Wish List

Starting at $ 120.00 USD

Add to Wish List

The Burger Motorsports DDP 5800 water methanol alcohol Injection pump is a heavy-duty pump used in all of our BMS Water Injection kits. 200 psi bypass for smooth and high pressure and 1.3 GPM open flow. Made in the USA. Available with built-in quick connect fittings for 1/4" WMI line or with open 3/8" NPT threads if you plan to use braided lines.

Show More Show Less

2 Gallon Low Profile Universal Methanol Tank

T#:20946755

Part#: 2G-ULPMT

In Stock

Starting at $ 179.00 USD

Add to Wish List

Starting at $ 179.00 USD

Add to Wish List

Integrated pump mount for a super clean install. This tank allows the pump (sold separately) to mount to the bottom of the tank making for a clean and fast installation. It’s universal and will fit a wide variety of trunk applications. The larger capacity means more time between fill ups. Offered in black for a stealth appearance and in clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Compatible with BMS DDP5800 pumps, ES4714512 or ES4714513 Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Pump mounts directly to the tank Compatible with all DDP 5800 pumps Super low profile design Available in clear for visually checking fluid levels Available in black for a stealth appearance Includes 2-way vented black plastic cap 4 mounting holes in the feet of the tank Includes a compression pump feed fitting, 2 90 degree push fittings, 9" of methanol line and pump mounting hardware. Made in the USA Tank dimensions: L 15.5" x W 8" x H 8.25"

Show More Show Less

1.25 Gallon Heavy-Duty Universal Methanol Tank

T#:20946761

Part#: 1.25G-UMT-CL

Ships on Oct 26, 2026

$ 69.00 USD

Add to Wish List

Qty

$ 69.00 USD

Add to Wish List

This tank is thicker and stronger than BMS' basic 1-gallon WMI tank. This tank features an easy fill filler nozzle, an anti-starvation reservoir with a pre-threaded bung for the included 90º compression pump feed fitting, a spill-catcher reservoir around the filler cap, a 2-way vented black plastic cap, and is translucent to allow visually checking the fluid level. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits 1.25 Gallon Tank (4.73 Liters) Anti-Starvation Reservoir Easy Fill filler Nozzle Spill-Catcher Reservoir around the filler cap Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a 90º compression pump feed fitting Tank dimensions: L 11" x W 4.5 x H 9"

Show More Show Less

Burger Motorsport JB4-Compatible Water/Methanol Injection System - N2...

T#:558163

Part#: BMS-WMI

Ships on Oct 23, 2026

Starting at $ 226.99 USD

Add to Wish List

Starting at $ 226.99 USD

Add to Wish List

Looking to make loads of power on pump gas? Enter: water/methanol injection. Regardless if you're tuned for conventional pump gas, E85, or race fuel, use of a properly configured and integrated water/meth system will reduce temperatures, allowing you to make more power than on just conventional fuel alone. Select your engine-specific nozzles (which are standard 1/8" NPT and install in most aftermarket chargepipes), your tank to mount in the trunk, upgraded steel braided lines if you so choose, and some boost juice and you just need a management solution! Optionally, add a BMS FSB for JB4 integration!

Show More Show Less

Water/Methanol Injection Hose - 20'

T#:21176944

Part#: BMS-WMI-IL

In Stock

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

BMS Water/Methanol Injection (WMI) Solenoid W/ Filter

T#:21176934

Part#: BMS-WMI-SOL

Ships on Oct 26, 2026

$ 75.00 USD

Add to Wish List

Qty

$ 75.00 USD

Add to Wish List

This solenoid safely stops fluid from flowing into your intake system when WMI is not in use. The solenoid features two 1/8 NPT ports with included compression 1/4 in. hose fittings for a quick leak-free connection. The included filter keeps dirt and debris out of your engine.

Show More Show Less

WMI Inline Filter

T#:21176933

Part#: BMS-WMI-FIL

Ships on Oct 26, 2026

$ 15.00 USD

Add to Wish List

Qty

$ 15.00 USD

Add to Wish List

This heavy duty methanol/water injection filter is specifically designed for a methanol/water system can filter particles down to 40 microns in size. It safeguards the functional components of the water/methanol system as well as your engine from particulates present in the water/methanol mixture.

Show More Show Less

Super Atomizing Water/Methanol Injection Nozzles

T#:20815192

Part#: BMS.SA.WMI.NOZ

Ships on Nov 5, 2026

Starting at $ 40.00 USD

Add to Wish List

Starting at $ 40.00 USD

Add to Wish List

With CNC machined serviceable/cleanable nozzle inserts for precise fluid metering. Choose single or dual nozzles and match the flow rate to your power needs! Water/Methanol Injection (WMI) nozzles are determined by the intended power and how many bungs your charge pipe has. These nozzles are 1/8” NPT and screw in to bungs included on most aftermarket charge pipes. BMS "super atomizing" nozzles are designed and manufactured by BMS and are known for their great atomization and flow characteristics. The number on the methanol injection nozzle represents the approximate gallons per hour of fluid when at full flow. Generally speaking running two smaller nozzles is preferred to one larger nozzle for an equal flow to improve fluid atomization and distribution.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Intake Parts for BMW F82 M4 S55 3.0L

Sub-Categories

BMW S55 Open Intake

Features and Benefits:

3.5 BAR MAP Sensor - 13627843531

BMW F30 E9X TMAP Sensors & PNP Adapters

Burger Motorsports 3.5 Bar TMAP Sensor & 32" Extension Harness - N54 ...

Air Pressure Sensor

Burger Motorsports 2013+ TypeB 4BAR Adapter - F2X F3X N54 N55 S55 ...

Autotecknic Dry Carbon Fiber Intake Air Duct - F80 M3 / F82/ F83 M4 ...

O-Ring

Vacuum Pump Sprocket

BMS Billet Water/Methanol Injection Tank Cap With Safety Check Valve ...

1 Gallon Methanol Tank - Clear/White

BMS DDP5800 Water/Methanol Injection Pump

2 Gallon Low Profile Universal Methanol Tank

1.25 Gallon Heavy-Duty Universal Methanol Tank

Burger Motorsport JB4-Compatible Water/Methanol Injection System - N2...

Water/Methanol Injection Hose - 20'

BMS Water/Methanol Injection (WMI) Solenoid W/ Filter

WMI Inline Filter

Super Atomizing Water/Methanol Injection Nozzles

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results