BMW Suspension Parts for BMW F83 M4 S55 3.0L

Clear BMW chassis

Please ensure your correct model is selected

Your BMW's handling is determined by the capabilities and age of your suspension components. Our selected aftermarket performance suspension like coilovers, lowering springs, cup kits, and dampers can improve the handling of your BMW dramatically. With those upgrades comes the needs for proper adjustment; our recommended supporting modifications comes stiffer sway bars, bushings, and adjustable camber/caster plates, to name a few found on this page. Completely build your suspension for the most competitive BMW driving experience, achieve your perfect look, or simply replace your worn suspension with our recommended parts.

Sub-Categories

Sort By:

KW Suspension - Corporate Logo
T#:363862
Part#: 352200AV
Back Ordered
$ 3,584.00 USD
Free Shipping
$ 3,584.00 USD
Free Shipping
KW was founded in 1995 and at the beginning it only existed of three employees and had an operating area that was rather small. Today, KW is represented all over the world and has approximately 200 employees in five locations. Currently, KW is the epitome for premium products in car tuning and automobile refinement. KW offers its customers the largest suspension program world-wide and each component is tested using their state-of-the-art seven-post drive dynamics test.
Show More Show Less
KW Suspension - Corporate Logo
T#:363861
Part#: 352200AW
Back Ordered
$ 3,964.00 USD
Free Shipping
$ 3,964.00 USD
Free Shipping
KW was founded in 1995 and at the beginning it only existed of three employees and had an operating area that was rather small. Today, KW is represented all over the world and has approximately 200 employees in five locations. Currently, KW is the epitome for premium products in car tuning and automobile refinement. KW offers its customers the largest suspension program world-wide and each component is tested using their state-of-the-art seven-post drive dynamics test.
Show More Show Less
KW Suspension - Corporate Logo
T#:341301
Part#: 68510390
In Stock
$ 583.99 USD
Free Shipping
$ 583.99 USD
Free Shipping

If you've recently upgraded your suspension and are plagued by suspension fault codes, the KW Suspension Fault Code Cancel Kit is the solution you need. This kit effectively cancels the factory damper signal, preventing those pesky fault codes from appearing. What's more, it's compatible with non-KW aftermarket suspensions as well, offering a versatile solution for your needs.

Show More Show Less

KMAC - Corporate Logo
T#:600206
Part#: 193926-3H
Special Order: No Guaranteed ETA
$ 320.00 USD
Free Shipping
$ 320.00 USD
Free Shipping
Nearly every car manufactured in the modern era carries a dark secret – fully-adjustable suspension has been all but eliminated in the name of cost-cutting and assembly-line efficiency. What this means for you is increased tire wear and more frequent replacement, as a “full alignment” consists only of rudimentary toe-angle adjustment. For over forty years, K-MAC has been hard at work developing a solution to this problem with patented innovations in camber/caster plates and bushing kits, allowing easy adjustment and a true “full four-wheel alignment” to be performed by any competent shop. These bushings make camber adjustments possible for the first time, and improve the ability to complete toe angle adjustments. When used in conjunction with the K-MAC Camber and Toe kit and Rear Adjustable Trailing Arms allows full adjustability of the 5 multi-link rear arms and positive location. Bolt-on installation – insertion/extraction tube included! Easily adjusted on the car with basic hand tools Unique failsafe locking hardware – set & forget! High quality elastomer compound resists binding Hardened & nickel-chrome plated centers for maximum bushing life 2x the load area of stock bushings Spiral grease grooves
Show More Show Less

KMAC - Corporate Logo
T#:16474811
Part#: 193926-9G
Special Order: No Guaranteed ETA
$ 320.00 USD
Free Shipping on orders $49 and up
Nearly every car manufactured in the modern era carries a dark secret – fully-adjustable suspension has been all but eliminated in the name of cost-cutting and assembly-line efficiency. What this means for you is increased tire wear and more frequent replacement, as a “full alignment” consists only of rudimentary toe-angle adjustment. For over forty years, K-MAC has been hard at work developing a solution to this problem with patented innovations in camber/caster plates and bushing kits, allowing easy adjustment and a true “full four-wheel alignment” to be performed by any competent shop. These bushings make camber adjustments possible for the first time, and improve the ability to complete toe angle adjustments. When used in conjunction with the K-MAC Camber and Toe kit and Rear Adjustable Trailing Arms allows full adjustability of the 5 multi-link rear arms and positive location. Bolt-on installation – insertion/extraction tube included! Easily adjusted on the car with basic hand tools Unique failsafe locking hardware – set & forget! High quality elastomer compound resists binding Hardened & nickel-chrome plated centers for maximum bushing life 2x the load area of stock bushings Spiral grease grooves
Show More Show Less
KMAC - Corporate Logo
T#:389648
Part#: 192716-2P
Special Order: No Guaranteed ETA
$ 795.00 USD
Free Shipping
$ 795.00 USD
Free Shipping
KMAC camber/caster plates use a patented adjustment method designed for easy and rapid alignment adjustments. The KMAC design has a 'floating' inner camber plate, rather than slotted, to allow camber and caster to be adjusted together. To adjust, simply loosen the top three nuts on the strut tower and position the KMAC mount to match your desired alignment settings. The KMAC design allows more camber and caster adjustment because separate caster hardware is eliminated. While primarily designed to increase negative camber for track use these can also be used to fix alignment issues that cause uneven tire wear or unwanted handling behavior.
Show More Show Less

KW Suspension - Corporate Logo
T#:384582
Part#: 253200AVKT
Back Ordered
$ 1,284.00 USD
Free Shipping
$ 1,284.00 USD
Free Shipping
KW H.A.S - Height Adjustable Spring kits are a great alternative to conventional springs. You can adjust the height of your vehicle with the KW height adjuster. These kits are ideal for cars with either stock type shocks or the factory EDC - Electronic Damping Control - shocks, as the factory EDC system is retained. This lowering solution from KW optimizes the dynamic performance and steering behavior while still using the factory EDC system. This kit contains vehicle-specific adjustable spring seats with adjusting KW lowering springs. This complete conversion allows an individual adjustable lowering solution. Front Lowering Range: 0.2"-1.0" Rear Lowering Range: 0.2"-1.0"
Show More Show Less
KW Suspension - Corporate Logo
T#:396820
Part#: 68510490
Ships in 5 Business Days
$ 1,453.99 USD
Free Shipping
$ 1,453.99 USD
Free Shipping
Looking to increase the amount of camber adjustment and add a bit more strength to your rear suspension components? The KW adjustable lower control arms might be perfect solution.