Mishimoto BMW Engine Parts for BMW F83 M4 S55 3.0L

Mishimoto Baffled Oil Catch Can - F8X M2 M3 M4 S55

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:637363

Part#: MMBCC-F80-15CBE

In Stock

$ 306.99 USD

Add to Wish List

Qty

$ 306.99 USD

Add to Wish List

Give your 2015–2020 BMW M3/M4 the protection it deserves with the Mishimoto Baffled Oil Catch Can Kit. The introduction of the S55 into the M3 and M4 in 2015 was the first time compact M’s saw turbos from the factory, but these engines brought along another long-standing tradition—blow-by. The Mishimoto BMW M3/M4 catch can kit uses proven engineering from the patent pending Mishimoto 2-Port Compact Baffled Oil Catch Can, with its 50-micron bronze filter and internal baffle, to better separate the oil from the crankcase vapors. The engineers at Mishimoto designed a CNC-machined lid that features large inlet and outlet ports to match the inner dimension of the CCV hose. This baffled oil catch can defends your intercooler, intake system, and VANOS system from oil blow-by and helps maintain proper octane levels to reduce potential detonation. The kit comes with two direct-fit hoses, which require no modification to the engine cover, and one direct-fit billet aluminum mounting bracket that is extremely easy to install and mounts the can in a serviceable location! Two aluminum, 3/4” barb fittings connect the hoses to the can. And, like every Mishimoto oil catch can, this baffled catch can kit comes with the Mishimoto Lifetime Warranty! Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you’ve seen what we’ve seen in the bottom of our catch cans, you won’t want that draining back into your oil either. *After installation, Mishimoto recommends checking the contents of the baffled catch cans every 1,000 miles until a baseline is established. Oil blow-by accumulation will vary with ambient temperatures and driving conditions. It is important that the contents of the can do not rise above the internal baffle* Features: Direct fit for the 2015–2020 F8X BMW M3 and M4 Single can mounts in line with the CCV system to separate oil from air using a 50-micron bronze filter Helps reduce carbon buildup on intake valves Patent-pending billet 6061 aluminum can sealed with Viton™ O-rings Installs in under 30 minutes Robust CNC-machined anodized aluminum bracket mounts the can in a serviceable location Includes pre-molded hoses for simplified installation Defends Vanos system and essential engine components from oil blow-by CNC-machined aluminum barbed fittings ensure a sturdy connection between lines and can Catch can has a 3 oz. capacity for longer servicing intervals Internal air diverter increases air turbulence to improve oil separation Helps maintain proper octane levels to reduce potential detonation Filter and can are fully serviceable Mishimoto Lifetime Warranty Included: (1) Compact Baffled Oil Catch Can (1) Application-Specific Mounting Bracket (2) Direct-Fit Hoses (2) 3/4" Aluminum Barbed Fittings (4) Worm Gear Clamps Mounting Hardware Mishimoto Lifetime Warranty WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

Mishimoto Universal Catch Can Kit - Carbon Fiber

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:372557

Part#: MMOCCCF

In Stock

$ 162.99 USD

Add to Wish List

Qty

$ 162.99 USD

Add to Wish List

Universal kit with a catch can and rubber hose; for retrofitting on a variety of vehicles. Carbon fiber catch can prevents a harmful buildup of oil inside of the turbocharger, intake manifold, intercooler and piping. Separates oil particles from PCV/CCV air Defends intercooler, intake system, and essential components from oil blow-by Made from lightweight carbon fiber Compact design makes for easy engine bay placement Checking fluid levels made easy with built in sight tube Comes complete with mounting bracket, hose, all necessary clamps, fittings, and mounting hardware Mishimoto Lifetime Warranty WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

Large Aluminum Oil Catch Can

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:597051

Part#: MMOCCLA

In Stock

$ 127.99 USD

Add to Wish List

Qty

$ 127.99 USD

Add to Wish List

WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

Mishimoto Performance Direct-Fit Oil Cooler - F8X M2 M3 M4 S55 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:637357

Part#: MMOC-F80-15

In Stock

$ 609.99

This product was last offered at the strikethrough price on
05-08-2026

$ 549.99 USD

Add to Wish List

Qty

$ 549.99 USD

Add to Wish List

Add some much-needed durability and cooling power to your M3 or M4 with the Mishimoto 2015-2020 BMW M3/M4 Oil Cooler. True to form, the engineers at BMW designed the M3/M4’s oil cooler with efficient use of space in mind. Suspended perpendicular from the rest of the cooling stack, this location utilizes the Bimmer’s aerodynamics in order to cool the oil, all while putting the lightweight, tube-and-fin cooler in harm's way of road hazards. We here at Mishimoto made sure to beef up the oil cooler design for the F80/82 with our performance oil cooler. We ditched the lightweight design for a full aluminum, TIG-welded bar-and-plate cooler for added strength and cooling. The bars and plates are a much more robust form of heat exchanger core construction intended for improved heat transfer and have the strength to shrug off potential road debris, keeping your oil temps down, and where it should be. We also added 10mm to the core’s thickness, equating in a 46% increase in core volume, and increased the oil capacity by .4 qt. The Mishimoto 2015-2020 BMW M3/M4 Oil Cooler fits directly in place of the stock unit, and includes the Mishimoto Lifetime Warranty for a simplified and worry-free installation. Features: Direct fit for the 2015–2020 BMW F8X M3, M4, and M2 Competition Full aluminum TIG-welded construction 46% increase in core volume Increases oil capacity by .44 quarts Robust bar-and-plate construction for improved durability and heat rejection Silver powder-coated finish for maximum protection No cutting or modifications required Mishimoto Lifetime Warranty Included: (1) Performance Oil Cooler (2) Replacement O-Rings Mounting Hardware Mishimoto Lifetime Warranty WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

Mishimoto 19 Row Universal Oil Cooler

For custom applications only. Not a direct bolt on.

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:378414

Part#: MMOCUL

In Stock at Vendor

$ 536.99 USD

Add to Wish List

Qty

$ 536.99 USD

Add to Wish List

Even under optimum driving conditions increased oil temperatures will cause a drop in pressure and will decrease the ability for your engine to be properly lubricated. With this new oil cooler, you can keep your oil temperatures down for optimum driving conditions. The kit includes four-feet of stainless braided line, adapter fittings, and oil filter sandwich adapter. Rows: 19 Overall Dimensions: 13" x 5.5" x 2" Core Dimensions: 11.25" x 5.5" x 2" Braided Hoses: 4ft .75 inch & 4ft 9 inch Braided Hose Fittings: -10AN Sandwich Plate Fittings: -10AN WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

BMW Two Port Universal Catch Can - Black

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:23020165

Part#: MMBCC-CBTWO

In Stock

$ 160.99 USD

Add to Wish List

Qty

$ 160.99 USD

Add to Wish List

Optimize your vehicle's performance and shield crucial components with the Mishimoto Compact 2-Port Baffled Oil Catch Can. This innovative solution effectively separates oil particles from PCV/CCV air using a 50-micron bronze filter, ensuring defense against oil blow-by for your intercooler, intake system, and vital parts. Constructed with a patented billet 6061 aluminum can sealed with Viton™ O-Rings, this catch can guarantees both durability and effectiveness.

Equipped with a universal mounting bracket, it allows adaptable installation and comes complete with two CNC-machined aluminum 1/2" barbed hose fittings. With an enhanced 3 oz internal capacity, service intervals are prolonged, while its fully serviceable filter and can ensure enduring functionality.

Engineered for safety in pressurized applications, the internal air diverter enhances oil separation by amplifying air turbulence. Available in black, red, or polished finishes, this catch can preserves proper octane levels, reducing potential detonation and promoting extended engine life.

The product package includes the Compact 2-Port Baffled Oil Catch Can, two Aluminum 1/2" Barbed Fittings, and a Universal Mounting Bracket, all backed by the Mishimoto Lifetime Warranty.

WARNING! Prop 65 may apply to this product.

Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to all companies selling products in California.

Prop 65 mandates listing any chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm.

For more information about California Prop 65 warning, visit: www.P65Warnings.ca.gov.

Show More Show Less

Mishimoto Universal 10 Row Oil Cooler

For custom applications only. Not a direct bolt on.

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:378421

Part#: MMOCU

In Stock

$ 410.99 USD

Add to Wish List

Qty

$ 410.99 USD

Add to Wish List

This universal oil cooler from Mishimoto is far superior to the factory unit with its 11" x 2.76" x 1.97" core. Even under optimum driving conditions increased oil temperatures will cause a drop in pressure and will decrease the ability for your engine to be properly lubricated. With this new oil cooler, you can keep your oil temperatures down for optimum driving conditions. The kit includes 4 feet of stainless braided line, adapter fittings, and oil filter sandwich adapter. Mishimoto Automotive is a leading manufacturer of aftermarket performance cooling products. The company was established back in 2003 with one goal. That goal was to provide customers with quality cooling system upgrades that work on the track and on the road. At Mishimoto, you never have to worry about the quality of the product you are installing. This kit is universal and is not a direct bolt on. *For custom applications only. Not a direct bolt on. WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

Mishimoto Nylon Braided Oil Cooler Hose Kit

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:2839826

Part#: MMSBH-F80-15

In Stock at Vendor

$ 456.99 USD

Add to Wish List

Qty

$ 456.99 USD

Add to Wish List

The F8X M3/4 are equipped with a set of hardlines connecting the oil pump tot he oil cooler, these corrode overtime and start to fail causing oil leaks leading and improper oiling of your engine. This Mishimoto kit includes both lines and all needed brackets and hardware for a OE like installation, Features Direct replacement for OE hard lines -10AN fittings and adapters for use with OE oil cooler Mishimoto Lifetime Warranty WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

Mishimoto Performance Air-to-Water Intercooler Power Pack - F8X M2 M3...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
CARB certified for sale in all 50 states

T#:637354

Part#: MMB-F80-PP

EO#: D-759-13

In Stock at Vendor

$ 2,652.99 USD

Add to Wish List

Qty

$ 2,652.99 USD

Add to Wish List

BMW has a knack for maintaining its stake as the benchmark when it comes to performance luxury vehicles, with the F8X generation being no exception. The S55 that powers the 2015–2020 BMW F8X M3, M4, and M2 Competition is dripping with technology, which includes an air-to-water intercooling system as a means of keeping cool. Where BMW’s intercooling system design was enough to help bring this generation of mid-sized M’s to their peak, we here at Mishimoto found some weaknesses that we felt obliged to address, with a power bundle consisting of our full Performance Intercooler Product suite. The Mishimoto 2015–2020 BMW F8X M3/M4 Performance Intercooler Power Pack counters the weaknesses in BMW’s design, starting with the charge pipes. Cracking under pressure or splitting at the seams are common problems with factory plastic charge pipes. These can result in less than ideal situations as you pilot your M3 or M4. We created a brand-new design for the charge pipes that inspire more confidence in handling the boost pressure. Our design features a full aluminum construction with a cast midsection designed specifically to squeeze past the intake. Our charge pipe kit also includes a pair of matte black silicone couplers for a sleek and secure connection to the intercooler. The nondescript silver box is out, and the stylish new Mishimoto Performance Air-to-Water Intercooler is in. With a new look, our design fits perfectly in the M3 and M4’s engine bay, both in terms of installation and aesthetics. The beauty is more than just skin deep. Our improved core design features a bar-and-plate core with a 29% increase in core volume, as well as a unique single-pass coolant flow layout for optimal heat transfer. Combined with our 16% increase in flow through the core, we were able to record a 12°F temperature drop in intake air temperatures while testing our full Power Pack. An air-to-water intercooling system wouldn’t be complete without the heat exchanger. When it came to BMW’s design, it was a solid foundation, but we still saw room to grow, literally. Our full aluminum design added 6” to the height of the core, equating in a 180% increase in external fin surface area and a 60% increase in core volume. With our heat exchanger in the S55’s system, we recorded a 10°F drop in global intercooler coolant temperatures and an average gain of 11 whp and 8 wtq when the full Mishimoto 2015–2020 BMW F8X Performance Intercooler Power Pack was tested on our Stage 1 tuned M3. For added security, we made sure to include our optional steel mesh stone guard with the Mishimoto Performance Heat exchanger to keep all the tubes and fins intact. We also utilized a variable fin pitch on our heat exchanger’s core for optimal cooling on DCT-equipped vehicles. Even though the F8X generation of the M3, M4, and M2 Competition was designed to pull ahead of the rest, there's still much to be desired when it comes to cooling. The Mishimoto 2015–2020 BMW F8X M3/M4 Performance Intercooler Power Pack is the perfect companion for your build, and like all of our products, is covered under the Mishimoto Lifetime Warranty. Features: Direct fit for the BMW F8X M3, M4, and M2 Competition Includes S55 Performance Intercooler, Heat Exchanger, and Charge Pipe Kit 12°F drop in intake air temperatures and 10°F reduction in global intercooler coolant temperatures Dyno-proven average power gains of 11 whp and 8 wtq with peak gains of up to 31 whp and 10 wtq on stage 1 tuned vehicle The intercooler features a unique bar-and-plate, single-pass coolant passage design, and cast aluminum end tanks for optimal flow and cooling capacity Intercooler core volume increased by 29% with 16% improved flow Heat Exchanger features all-aluminum construction with 180% increase in fin surface area and 60% increase in core volume Heat exchanger includes an optional stone guard for added protection against road debris Heat Exchanger utilizes variable fin pitch for improved flow to DCT cooler Charge Pipe Kit features full aluminum construction and cast midsection for maximum durability and perfect fitment Charge pipes include matte silicone couplers for sleek and secure connection to the intercooler Mishimoto Lifetime Warranty Includes: (1) Performance Air-to-Water Intercooler (1) Performance Heat Exchanger (1) Heat Exchanger Stone Guard (2) Charge Pipes (2) Silicone Couplers (4) Worm Gear Clamps Mounting Hardware Mishimoto Lifetime Warranty WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

Mishimoto Skid Plate - BMW F8X M3 M4

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:51075059

Part#: MMSD-F80-15WBK

Ships in 3 Business Days

$ 443.99 USD

Add to Wish List

Qty

$ 443.99 USD

Add to Wish List

Offers an ideal balance between lightweight performance and structural rigidity.

Mishimoto Air-to-Water Intercooler Power Pack - Alpine White III - BM...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:51039961

Part#: MMB-F80-PPCAW

Ships in 3 Business Days

$ 2,926.00 USD

Add to Wish List

Qty

$ 2,926.00 USD

Add to Wish List

Reinforces the S55's cooling structure, ensuring adequate airflow and maximizing heat transfer efficiency.

Mishimoto Stainless Steel T-Bolt Clamp - 3.0"

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:31589358

Part#: MMCLAMP3

In Stock at Vendor

$ 7.99 USD

Add to Wish List

Qty

$ 7.99 USD

Add to Wish List

Mishimoto Air-to-Water Intercooler Power Pack - Sakhir Orange Metalli...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:51039974

Part#: MMB-F80-PPCSO

EO#: D-759-13

Ships in 3 Business Days

$ 2,926.00 USD

Add to Wish List

Qty

$ 2,926.00 USD

Add to Wish List

Eliminates risk of pipe-bursts by upgrading to mandrel-bent aluminum units.

Mishimoto Air-to-Water Intercooler Power Pack - Mineral Gray Metallic...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:51039970

Part#: MMB-F80-PPCMG

Ships in 3 Business Days

$ 2,926.00 USD

Add to Wish List

Qty

$ 2,926.00 USD

Add to Wish List

This Power Pack focuses on reinforcing the structural integrity of the S55’s induction system while maximizing fluid dynamics.

Mishimoto Air-to-Water Intercooler Power Pack - Mineral White Metalli...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:51039973

Part#: MMB-F80-PPCMW

Ships in 3 Business Days

$ 2,926.00 USD

Add to Wish List

Qty

$ 2,926.00 USD

Add to Wish List

This Power Pack focuses on reinforcing the structural integrity of the S55’s induction system while optimizing air and fluid dynamics.

Mishimoto Air-to-Water Intercooler Power Pack - Black Sapphire Metall...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:51039962

Part#: MMB-F80-PPCBS

Ships in 3 Business Days

$ 2,926.00 USD

Add to Wish List

Qty

$ 2,926.00 USD

Add to Wish List

This Power Pack focuses on reinforcing the structural integrity and fluid dynamics of the S55’s induction system.

Mishimoto Air-to-Water Intercooler Power Pack - Yas Marina Blue Metal...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:51039977

Part#: MMB-F80-PPCYMB

EO#: D-759-13

Ships in 3 Business Days

$ 2,926.00 USD

Add to Wish List

Qty

$ 2,926.00 USD

Add to Wish List

This Power Pack is designed to strengthen the structural integrity of the S55’s induction path while maximizing airflow and fluid dynamics.

Mishimoto Air-to-Water Intercooler Power Pack - Lime Rock Gray Metall...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:51039969

Part#: MMB-F80-PPCLRG

Ships in 3 Business Days

$ 2,926.00 USD

Add to Wish List

Qty

$ 2,926.00 USD

Add to Wish List

This Power Pack focuses on reinforcing the structural integrity of the S55’s induction system while optimizing fluid dynamics.

Project Cars

SELECT YOUR BMW

Mishimoto BMW Engine Parts for BMW F83 M4 S55 3.0L

Sub-Categories

Mishimoto Baffled Oil Catch Can - F8X M2 M3 M4 S55

Mishimoto Universal Catch Can Kit - Carbon Fiber

Large Aluminum Oil Catch Can

Mishimoto Performance Direct-Fit Oil Cooler - F8X M2 M3 M4 S55 ...

Mishimoto 19 Row Universal Oil Cooler

BMW Two Port Universal Catch Can - Black

Mishimoto Universal 10 Row Oil Cooler

Mishimoto Nylon Braided Oil Cooler Hose Kit

Mishimoto Performance Air-to-Water Intercooler Power Pack - F8X M2 M3...

Mishimoto Skid Plate - BMW F8X M3 M4

Mishimoto Air-to-Water Intercooler Power Pack - Alpine White III - BM...

Mishimoto Stainless Steel T-Bolt Clamp - 3.0"

Mishimoto Air-to-Water Intercooler Power Pack - Sakhir Orange Metalli...

Mishimoto Air-to-Water Intercooler Power Pack - Mineral Gray Metallic...

Mishimoto Air-to-Water Intercooler Power Pack - Mineral White Metalli...

Mishimoto Air-to-Water Intercooler Power Pack - Black Sapphire Metall...

Mishimoto Air-to-Water Intercooler Power Pack - Yas Marina Blue Metal...

Mishimoto Air-to-Water Intercooler Power Pack - Lime Rock Gray Metall...

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Narrow Results