Home
Engine Parts
Fuel System

BMW Fuel System Parts for BMW F83 M4 S55 3.0L

Clear BMW chassis

Looking for a BMW fuel pump, BMW gas cap or other BMW fuel system related items? You've found the right place. Your BMW fuel delivery system is a critical system, and any failure can rended your BMW dead in the water. Whether your fuel pump has stopped pumping, a fuel injector is clogged or not spraying, or your gas cap is either lost or not properly sealing, we likely have what you are looking for. We stock thousands of BMW fuel system parts so if you don't see what you are looking for, just give us a call.

Sub-Categories

Sort By:

Port Injector Plugs

T#:27171925

Part#: UNI-BMS-PIPLUGS

In Stock

$ 60.00 USD

Add to Wish List

Qty

$ 60.00 USD

Add to Wish List

These dummy injectors fit in place of port injection fuel injectors to block the holes. Allows use to aluminum manifolds with port injection bungs without having to purchase fuel injectors. Plugs are EV14 injectors and measure 38mm or 1.5" from o-ring to o-ring.

Show More Show Less

F8X - S55 EKP PNP Cooler Kit

A Must For Cars With Upgraded LPFPs

T#:26471618

Part#: AT225F22BLA501S5

Ships in 2 Business Days

$ 44.99 USD

Add to Wish List

Qty

$ 44.99 USD

Add to Wish List

A Must For Cars With Upgraded LPFPs The full plug-and-play EKPM3 cooler kit is designed specifically for F80, F82, F83, and F87 (Comp) BMWs using an EKPM3 fuel pump control module. This is recommended for anyone using a low-pressure fuel pump that is larger than the OEM fuel pump. We designed this kit with the help of Island Racewerks. The cooler housing is designed to fit over the EKP module just like the OEM housing and fits with plenty of room in the stock EKP location. The housing is 3D printed using durable PLA+. The full kit is printed and assembled in the U.S.A. by Arc Terminator LLC. Full Kit Contents: 1x EKPM3 Cooler Housing With 5015 Fan 1x 14x14x6mm Heatsink With Thermal Tape 1x 14x9x5mm Heatsink With Thermal Tape 1x 9x9x5mm Heatsink With Thermal Tape (EKPM3 Kit) 4x 4" Zip Ties 1x Alcohol Wipe 1x 2 Amp Mini Blade Fuse Why this kit exists: The EKPM3 and EKPM2 have been shown to overheat and cause vehicle shutdown issues when larger fuel pumps that draw more current than OEM are used. This shutdown comes from critical components on the EKPM3 and EKPM2 overheating when larger current draws are coming from the fuel pump. The PNP kit comes with heatsinks for the most heat-sensitive and heat-producing components in the EKPM3 / EKPM2 to further increase cooling effectiveness. When paired with a potent 5015 blower fan that directs a large amount of airflow through the cooler housing, the EKPM3 / EKPM2 stays significantly cooler, which prolongs the life of the module. We also recommend anyone using a larger fuel pump than OEM to properly code their EKP module with Pro-Tool's built-in "Voltage Fix" feature.

Show More Show Less

MTX-D: Ethanol Content % And Fuel Temperature Gauge

T#:22558994

Part#: INN3904

In Stock at Vendor

14% off MSRP $ 313.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 269.00 USD

Add to Wish List

Qty

14% off MSRP

$ 313.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 269.00 USD

Add to Wish List

Introducing the Innovate Motorsports MTX Digital Series "Dual Function" Gauges – now available! These 2 1/16" (52mm) gauges come with interchangeable faceplates and bezels, locking connectors for simplified installation, and MTS serial connections for seamless integration with other Innovate devices for data logging.

DISPLAY RANGE

Ethanol Content %: 0-100%
Temperature: -40-257 °F (-40-125°C)

KEY FEATURES

Ethanol Content
Error reporting for ethanol content sensor (Digital Display)
Fuel Temperature
Customizable exterior LED display
Programmable exterior LED color options
Selectable unit of measure in °F or °C
Programmable fuel temperature warning (outer LED)
2-Configurable analog outputs
Ethanol Content: 0v = 0%, 5v = 100%
Fuel Temperature: 0v = -40 °F, 5v = 257 °F (-40-125°C)

MTX-D: Ethanol Content Percentage & Fuel Temp Gauge Kit includes Gauge (Black Faceplate, Black Bezel), Silver Bezel & White Faceplate, Harness, Program Cable (Serial), Ethanol Content Sensor, Quick Start Installation Guide.

Please note that this is a universal fitment gauge, and installation may vary depending on the vehicle.

Show More Show Less

Multi-Pump Fuel Surge Tank (MPFST)

T#:31059457

Part#: 20-1440

In Stock

$ 549.99 USD

Add to Wish List

Qty

$ 549.99 USD

Add to Wish List

Nostrum Stage 2 DI Injectors - S55/N55

T#:9609825

Part#: H703-1257

Special Order: No Guaranteed ETA

$ 1,799.00 USD

Add to Wish List

Qty

$ 1,799.00 USD

Add to Wish List

The Stage 2 Injectors from Nostrum performance are an absolute must-have for those building big power N55 or S55 vehicles. While there are other injection methods out there - this is the OE upgrade we've all been looking for. These upgraded injectors are a seamless integration and provide the ability to deliver 55% more fuel than stock injectors.

Show More Show Less

F8X - S55 Silent EKP PNP Cooler Kit - 40mm Noctua Fan

A Must For Cars With Upgraded LPFPs

T#:26471619

Part#: AT233F22BLA40MS5

Ships in 2 Business Days

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

A Must For Cars With Upgraded LPFPs The full plug-and-play EKPM3 cooler kit is designed specifically for F80, F82, F83, and F87 (Comp) BMWs using an EKPM3 fuel pump control module. This is recommended for anyone using a low-pressure fuel pump that is larger than the OEM fuel pump. We designed this kit with the help of Island Racewerks. The cooler housing is designed to fit over the EKP module just like the OEM housing and fits with plenty of room in the stock EKP location. The housing is 3D printed using durable PLA+. The full kit is printed and assembled in the U.S.A. by Arc Terminator LLC. Full Kit Contents: 1x EKPM3 Cooler Housing With a Single Noctua 40mm Fan 1x 14x14x6mm Heatsink With Thermal Tape 1x 14x9x5mm Heatsink With Thermal Tape 1x 9x9x5mm Heatsink With Thermal Tape (EKPM3 Kit) 4x 4" Zip Ties 1x Alcohol Wipe 1x 2 Amp Mini Blade Fuse Why this kit exists: The EKPM3 and EKPM2 have been shown to overheat and cause vehicle shutdown issues when larger fuel pumps that draw more current than OEM are used. This shutdown comes from critical components on the EKPM3 and EKPM2 overheating when larger current draws are coming from the fuel pump. The PNP kit comes with heatsinks for the most heat-sensitive and heat-producing components in the EKPM3 / EKPM2 to further increase cooling effectiveness. When paired with a potent 5015 blower fan that directs a large amount of airflow through the cooler housing, the EKPM3 / EKPM2 stays significantly cooler, which prolongs the life of the module. We also recommend anyone using a larger fuel pump than OEM to properly code their EKP module with Pro-Tool's built-in "Voltage Fix" feature.

Show More Show Less

Nostrum Twin Standard Bore High Pressure Fuel Pump Kit - S55 ...

T#:9609824

Part#: H086-0865

Ships in 1-2 days

$ 3,499.00 USD

Add to Wish List

Qty

$ 3,499.00 USD

Add to Wish List

Flowing 36% more fuel than stock, the Nostrum HPFP’s will provide you with more fuel earlier in the rpm range. This allows you to dial in more boost down low, allowing for more low end torque, reach your peak power sooner, and hold that peak power for longer. The Nostrum HPFP kit requires no permanent modifications, allowing you to revert your vehicle to stock in the future!

Show More Show Less

BimmerWorld Fuel Starvation Kit - F8X M2/M3/M4, F3X 335i/435i, F22 M2...

T#:40207517

Part#: 100.16.682.0001

Ships in 6 Business Days

$ 262.99 USD

Add to Wish List

Qty

$ 262.99 USD

Add to Wish List

BMW S55 Stage 3 Low-Pressure Fuel-Pump | Spool Performance

T#:640962

Part#: SP-BMF8X-FP

Special Order: No Guaranteed ETA

$ 999.99 USD

Add to Wish List

Qty

$ 999.99 USD

Add to Wish List

BMW S55 Stage 3 Low-Pressure Fuel-Pump is an advanced upgrade designed to significantly enhance your vehicle's fueling system. Engineered by Spool Performance, a leader in the BMW Forced Induction industry, this fuel pump provides a substantial increase in fuel flow to support high-performance driving. The Stage 3 Low-Pressure Fuel-Pump more than doubles the flow rate of the stock fuel pump and is fully compatible with E85 fuels. It offers a plug-and-play installation for easy integration and comes with a lifetime warranty for peace of mind.

Increased Fuel Flow: Provides more than double the flow capacity of the stock fuel pump, supporting greater power output.
E85 Compatibility: Fully capable of handling E85 fuel, enhancing performance and efficiency.
Easy Installation: Plug-and-play design ensures a straightforward installation with no modifications required.
Lifetime Warranty: Comes with a lifetime warranty, reflecting Spool Performance’s commitment to quality and reliability.

Show More Show Less

Spool Performance FX-150 High Pressure Pump Kit - S55

T#:1241395

Part#: SP-FX-S55

Special Order: No Guaranteed ETA

$ 3,499.00 USD

Add to Wish List

Qty

$ 3,499.00 USD

Add to Wish List

The solution to increased fueling on high performance or big turbo applications has been made simple by Spool Performance. Features Include: 50% more fuel flow over stock E85 compatibility Plug and Play system Kit Contents: 2 x FX-150 upgraded high-pressure fuel pumps 1 x Ethanol Content Monitor with mobile apps 1 x Bosch spec 10-micron high flow Fuel Filter Upgraded Fuel lines and all necessary install hardware The upgraded pumps do require calibration changes. Spool performance can provide calibration details to your existing tuner and/or help you connect with established tuners who are experienced with these pumps.

Show More Show Less

Nostrum Stage 3 DI Injectors - N55 S55 F-Chassis

T#:26771703

Part#: H750-1605

Back Ordered

$ 2,199.00 USD

Add to Wish List

Qty

$ 2,199.00 USD

Add to Wish List

WHP potential on Gasoline: 1000 WHP* (Calculated assuming 24 MPa fuel pressure and 328 g/(kW/hr) WHP potential on E85: 730 WHP* (Calculated assuming 24 MPa fuel pressure and 328 g/(kW/hr) Flow Rate: 20.2 g/s @ 100 bar Flow rate increase over Stock:85% Max Operating Pressure: 250bar / 25MPa / 3625psi Tune required?: Yes Recommended Tuning Suite: Ecutek & Bootmod3

Show More Show Less

Radium - Split-Flow Flex Fuel Sensor Adapter

T#:53290958

Part#: 20-0589

In Stock at Vendor

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

Nostrum - 3.0L BMW S55 Stage 2 Bundle

T#:42604941

Part#: H186-1281

Ships in 2 Business Days

$ 5,519.00 USD

Add to Wish List

Qty

$ 5,519.00 USD

Add to Wish List

Flowing 36% more fuel than the stock pump, the twin Nostrum HPFP’s will provide you with more fuel throughout the rev range. This allows you to dial in more boost down low, allowing for more low end torque, reach your peak power sooner, and hold that peak power for longer.

Show More Show Less

Nostrum Flex Fuel Sensor Kit - F Chassis

T#:9674477

Part#: L081-1109

Back Ordered

$ 267.00 USD

Add to Wish List

Qty

$ 267.00 USD

Add to Wish List

The sensor reads the percentage of ethanol coming from your fuel tank and reports it to the content analyzer of your choice. The kit includes a sensor pre-mounted on a bracket designed to fit your vehicle, as well as adapter lines to adapt the sensor to the factory fuel lines.

Show More Show Less

Select Vehicle

Purpose

Category

Fuel System

Brand

Price

Special Offers

New (1)

Shipping