BMW S55 Open Intake offers a substantial upgrade from the factory M3/M4 intake system, enhancing both performance and sound. Designed for BMW enthusiasts and car aficionados, this intake system provides improved airflow while seamlessly integrating with OEM inlet ducting and stock mounting locations. The intake features aluminum inlet pipes, which are more cost-effective compared to carbon fiber alternatives but still deliver excellent performance.

Features and Benefits:

• Improved Airflow: Designed to enhance intake noise and overall performance.
• Seamless Fit: Integrates perfectly with OEM inlet ducting and stock mounting locations.
• Aluminum Construction: Provides a lower-cost alternative to carbon fiber while maintaining durability.
• Precise MAF Scaling: Ensures correct air-fuel ratios by matching factory MAF scaling.
• High-Quality Components: Includes 6061-T6 black anodized aluminum MAF sensor flange and vacuum line port.
• Effective Heat Shields: One-piece aluminum design with wrinkle black powder coating and pre-cut gold heat tape to protect against heat.
• High-Flow Air Filters: Conical filters made from 8-ply oiled cotton gauze with a bellmouth flange to reduce turbulence and maximize airflow.

Note: Photos may show the carbon fiber version; you will receive black powder-coated aluminum inlet pipes.

This product is not for sale or use in California on any pollution-controlled vehicle per the California Air Resources Board regulations.

Upgrade your BMW's air intake system with the Turner Motorsport Exact-Fit High-Flow Dry Air Filter, replacing the factory filter for improved engine performance. This reusable filter ensures proper air intake flow, enhancing power across the band and boosting fuel efficiency. With higher flow than stock paper filters, it's a direct OEM replacement, providing an instant increase in performance.

Key Benefits:

• Direct replacement for OEM filters.
• Higher flow than OEM for improved performance.
• Dry air filter—no oiling required.
• Reusable, saving money on frequent replacements.
• Cleaning needed only every 50,000 miles under normal driving conditions.

Choose the Turner Motorsport Exact-Fit High-Flow Dry Air Filter for a cost-effective performance upgrade without compromising on maintenance.

BMW’s turbocharged S55 engine uses a water-to-air charge air cooling system, with a front-mounted heat exchanger responsible for heat dissipation. Unfortunately, the factory single-row, 27mm core design is quick to heat soak under high load, leading to excessive intake air temperatures and potential limp mode conditions—especially on modified or track-driven cars.

To solve this issue, we've developed a drop-in upgrade over the factory unit. Engineered for durability and maximum cooling efficiency, this heat exchanger is a must-have for high-horsepower street builds, spirited canyon driving, and extended track sessions. Built from TIG-welded 5052 aluminum, our design eliminates the factory plastic end tanks—one of the system’s most common failure points. Each heat exchanger features CNC-machined billet aluminum hose connections, mounting flanges, and brackets for perfect OE fitment and trouble-free installation.

By replacing the OEM 27mm single-row core with a robust 35mm dual-row design, this heat exchanger dramatically increases both cooling capacity and surface area. Frontal area jumps from 307mm to 475mm, resulting in a 100% increase in coolant volume and significantly improved heat-soak resistance. The outcome? Lower, more stable charge air temperatures that help your S55 deliver consistent, reliable power—on the street or at the track.

Replaces OEM part numbers 17112284608 and 17112459062.

Features:

5052 aluminum construction eliminates plastic end tank failures A performance-oriented, dual-row core provides a 55% increase in frontal surface area, and a 100.29% increase in coolant volume over the OE heat exchanger! OE Heat Exchanger: Single-row core 27mm core thickness 307mm core height ECS High Performance Aluminum Heat Exchanger: Dual-row core 35mm core thickness 475mm core height TIG-welded 5052 aluminum end tanks, polished to a mirror finish for a high-quality look CNC-machined connectors and bracketry ensure seamless fitment with factory cooling hoses, transmission cooler lines, condenser, and radiator Drop-in upgrade - no modifications required for installation! Product Development:

Our High Performance Aluminum Heat Exchanger was designed, engineered, tested, and quality inspected by our Research and Development team in our Wadsworth, Ohio, facility. We strive for the highest level of precision and quality through leading-edge product development technology, including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.

Universal High-Flow Air Filter

Give your engine the airflow it deserves with this reusable, high-performance air filter—perfect as a direct replacement for an ECS intake system or as the finishing touch for your custom intake project.
Dimensions: 4.5" Base OD • 6" Filter Height • 3.5" Top OD

Upgrade from your restrictive factory filter to an ECS Tuning High-Flow Dry Air Filter and let your engine breathe freely. Improved intake flow enhances power throughout the rev range while helping maintain efficient fuel economy.

Oiled vs. Dry Filters — Which Is Right for You?

Oiled Filters

Offer slightly higher airflow for maximum performance

Require more frequent cleaning

Must be re-oiled after each cleaning

Long-term reusable design saves money over disposable paper filters

Dry Filters

Provide excellent airflow with minimal maintenance

Easily cleaned with warm, soapy water—no oiling required

Still flow significantly better than OE paper filters

Fully reusable and cost-effective

Both versions deliver superior performance over stock filters while offering the long-term benefit of reusability. Choose the option that best fits your maintenance style and performance goals.

The S55's factory intake system is a major bottleneck, muting its aggressive twin-turbocharged soundtrack and restricting performance. Oversized airboxes, restrictive paper filters, and charcoal pre-filters choke airflow, limiting power and induction noise. The result? An underwhelming driving experience that doesn’t do the twin-turbo-six justice.

ECS aims to solve this issue with their Luft-Technik Performance Intake System—engineered to optimize airflow, amplify induction sound, and completely transform your engine bay. By replacing the factory restrictions with a high-flow design, this system unleashes the S55’s true potential, delivering sharper throttle response, enhanced turbo efficiency, and an intoxicating intake note.

At its core, the Luft-Technik intake is comprised of dual aluminum inlet tubes, designed for both strength and function. Constructed from 6061 aluminum and finished in a wrinkle black powder coat, these tubes are built to withstand high engine bay temperatures and extreme conditions. Using advanced CAD modeling, ECS engineers optimized the tubing shape to ensure perfect MAF sensor scaling, maintaining factory AFR (air-to-fuel ratio) for peak reliability and efficiency. The unique ovular profile maximizes clearance around critical engine components while allowing for the largest possible inlet diameter. The crossover tube features standoffs for secure heat exchanger hose mounting and a CNC-machined 6061-T6 billet aluminum MAF flange and vacuum port, ensuring seamless integration with factory connections.

To prevent heat soaking and maintain consistent performance, our intake system incorporates precision-cut aluminum heat shields. Finished in a durable wrinkle black powder coat, the heat shields feature a rubber edge trim that seals against the hood, preventing engine bay heat from infiltrating the air intake tract. This results in lower intake air temperatures (IATs), improved air density, and overall improved performance even under demanding conditions.

Key Features:

Aluminum Inlet Tubes 6061 aluminum construction for durability and heat resistance Wrinkle black powder coat for a sleek, OEM+ finish Optimized ovular shape for maximum clearance and airflow Gradual transitions eliminate sharp bends for smoother intake flow MAF scaling matched to factory specs for precise AFR control CNC-machined 6061-T6 MAF flange and vacuum port for OEM fitment Aluminum Heat Shields One-piece aluminum construction for durability and heat isolation Wrinkle black powder coat for a stealthy appearance and heat resistance Rubber edge molding creates a perfect seal against the hood, blocking hot air Mounts to factory locations for hassle-free installation High-Flow Dual-Cone Air Filters 8-ply cotton gauze construction for superior filtration and flow Bellmouth 3" flange inlet minimizes turbulence and maximizes efficiency Enhanced induction noise for an aggressive turbocharged soundtrack Installation & Support:

Click HERE for a guided installation tutorial!

Ensure optimal engine performance with the replacement of your vacuum system hoses. The vacuum system plays a crucial role in the engine's functionality, transforming it into an efficient pump that influences air-fuel mixture and combustion. Damaged vacuum hoses can lead to various performance issues, from rough idle to difficulties starting the engine. If you're experiencing these issues, it's time to upgrade to this plastic hose with a 2.3mm inner diameter. The hose is black, arrives in an 8-foot section, and can be easily cut to the desired size for a perfect fit.

Key Features:

• Engine Optimization: Replacing old hoses ensures the vacuum system operates at peak performance.
• 2.3mm Inner Diameter: Designed to meet specific engine requirements.
• Black Color: Blends seamlessly with the engine components.
• 8-Foot Section: Provides flexibility to cut the hose to the required length.
• Easy Installation: Upgrade without hassle for improved engine efficiency.

Upgrade your vacuum system with this high-quality plastic hose, addressing performance issues and ensuring your engine runs smoothly.

Elevate your BMW project with ECS Tuning silicone couplers and elbows, providing a high-quality, precision-engineered solution for various applications. Whether you're installing an intercooler, fabricating a custom intake system, or pursuing other automotive projects, ECS Tuning delivers reliable performance and durability. Trust ECS Tuning to meet your needs and enhance your BMW project.

• High-quality silicone couplers and elbows for BMW projects
• Precision-engineered for reliability and performance
• Versatile solution for intercooler installations, custom intake systems, and more
• Ensures durability and longevity for your automotive projects

For optimal performance, consider the 46.5mm To 61.0mm Silicone Coupler.

Engineered with durability and functionality in mind, this silicone coupler provides a reliable connection for various components in your vehicle's intake or cooling system. Its smooth interior surface promotes efficient airflow, while its flexible and reinforced construction ensures a secure fit and prevents leaks. Enjoy hassle-free installation and enhanced performance with this premium silicone coupler.

• Durable silicone construction
• Smooth interior surface for efficient airflow
• Flexible and reinforced design prevents leaks
• Secure fit for reliable performance
• Hassle-free installation

ECS Silicone Coupler

Upgrade your BMW with the ECS Silicone Coupler. This straight 3 5/8" ID (92mm) x 3" L coupler is designed to enhance your vehicle's performance and durability. Crafted from high-quality silicone, it ensures long-lasting reliability and superior performance.

• Enhances vehicle performance
• Durable construction for long-lasting reliability
• Specifically designed for BMW vehicles

This mounts the air box to the inside of the engine bay, preventing it from shaking and/or bouncing�around.

Genuine BMW Bump Stop
This item fits the following BMW Chassis:
E82 1M Coupe,E85 Z4M,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F02,F22,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83,i3

Fits BMW Engines including:
N52,N52N,N54,N54T,N55,S54,S55
�

Elevate the performance and sound of your S55-powered F80 or F82 with the Turner F80 F82 M3/M4 Stainless Performance CATBACK Exhaust - Valved. Turner's engineers designed this exhaust system to maximize flow, capturing the full unrestricted sound of the twin-turbo inline-6 S55 engine. The dual 2.5" stainless exhaust pipes lead into a meticulously designed muffler, ensuring superior flow even with the exhaust valves closed. Enjoy the flexibility to control the exhaust's aggressiveness beyond factory capabilities. The Turner Stainless exhaust, with its direct fitment and straightforward installation, stands as the optimal choice for your mission to find the best exhaust.

Key Features:

• In-house design and engineering for precision fitment
• 304SS pipe material with a natural finish
• 2.5" OD mandrel-bent tubing
• Barbed exhaust hangers Tig-Welded in OE locations
• Valved muffler optimized for superior flow
• Utilizes factory valve control
• High-flow middle muffler section for enhanced sound, performance, and weight savings
• Dual 2.5" 304SS Mid-pipes
• Clamps, gaskets, and hardware for an OEM+ install
• Brushed Turner Exhaust tips - 2.5" Inlet, 4.0" Outlet

Turner M3/M4 Street Open Intake System:

Experience enhanced intake noise and carbon fiber aesthetics with the FREE Doorbuster Turner M3/M4 Street Open Intake System. Turner's S55 intake provides improved functionality and seamlessly integrates with OEM inlet ducting and stock mounting locations. Meticulously engineered for correct MAF scaling to maintain precise AFRs, this street intake system features aluminum inlet pipes for cost-effectiveness.

Product Details:

• Aluminum Intake Tubes designed for clearance and gradual transitions
• MAF scaling matches factory intake for correct AFRs
• 6061-T6 black anodized aluminum MAF sensor flange and vacuum line port
• One-piece aluminum heat shields with wrinkle black powder coating
• Heat shields provide a barrier for hot air, supplied with pre-cut gold heat tape
• Conical hi-flow reusable air filters with 8-ply oiled cotton gauze
• Bellmouth filter flange inlet to reduce turbulence and maximize flow