VRSF Upgraded Cold Side J Pipe Charge Pipe - S55 F8X F87

We Price Match - Give Us A Call or Chat!

T#:585046

Part#: 10801060

In Stock

$ 139.99 USD

Add to Wish List

Qty

$ 139.99 USD

Add to Wish List

The VRSF aluminum J pipe upgrade for your M3/M4 replaces the weak plastic chargepipe that is prone to failing at and above OEM boost levels. Featuring precision CNC billet aluminum flanges and they are finished in powder coated wrinkle black. It also includes two plugged methanol bungs for those who are using or plan to use meth/water injection.

Show More Show Less

VRSF Charge Pipe Upgrade Kit - S55

We Price Match - Give Us A Call or Chat!

T#:584939

Part#: 10801050

In Stock

$ 299.99 USD

Add to Wish List

Qty

$ 299.99 USD

Add to Wish List

Reduce turbo lag and increase throttle response with a billet aluminum charge pipe from VRSF. Featuring CNC billet aluminum and a sharp black powder coated finish, and comes with all neccesary installation components. This piece also includes two plugged methanol bungs for those who use or plan to use methanol/water injection.

Show More Show Less

Top Mount Intercooler Upgrade - S55

We Price Match - Give Us A Call or Chat!

T#:585410

Part#: 10803010

In Stock

$ 549.99 USD

Add to Wish List

Qty

$ 549.99 USD

Add to Wish List

Get the most out of your S55 engine by replacing the factory intercooler with this top mount intercooler kit from VRSF. This intercooler will allow for more horsepower gains by reducing intake temperatures and preventing heat soak. With an OEM setup, you can expect a large rise in temperature during heavy acceleration. The same acceleration with the top mount intercooler will actually reduce overall temperatures.

Show More Show Less

BMC Performance Air Filter - F06 F10 F12 F80/2 M3 M4 M5 M6

T#:398705

Part#: FB647/20

In Stock at Vendor

$ 207.99 USD

Add to Wish List

Qty

$ 207.99 USD

Add to Wish List

Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.

Show More Show Less

S55 Front Mount Heat Exchanger - F8X S55

We Price Match - Give Us A Call or Chat!

T#:640521

Part#: 10803020

Ships in 1 Business Day

$ 499.99 USD

Add to Wish List

Qty

$ 499.99 USD

Add to Wish List

Replace your inefficient factory front-mounted heat exchanger with the VRSF Competition upgrade kit to get the most performance and reliability out of your M2C, M3 & M4 with the S55 engine. They designed this kit to be one of the best performing, direct bolt on intercoolers available for your BMW with special attention to quality and performance while maintaining a reasonable price. Our intercoolers allow for higher HP gains, mainly due to their ability to keep intake temps down while preventing heat soak which is a common problem with the factory intercooler. This results in a more power and increased reliability with reduced chances of pre-detonation & knock.

Show More Show Less

Vargas Turbo Silicone Charge pipes - Blue - S55

T#:390441

Part#: VPP-S55-SIL-1B

Ships in 10 Business Days

$ 418.99 USD

Add to Wish List

Qty

$ 418.99 USD

Add to Wish List

Looking to get the most efficient turbocharger operation out of your S55 powered BMW? The best way to do this is to remove all restriction from the inlet, and charge tract. The factory charge pipes are poorly designed due to being completely flattened coming out of the turbos, before the intercooler. These VTT S55 silicone charge pipes get rid of those restrictions and provide a full 2″ ID from the turbochargers into the intercooler, as well as not allowing any heat soak to occur like other aluminum pipes on the market. The VTT charge pipes are a full 7 ply wire reinforced silicone, with an extra layer of silicone on the interior, tested to over 150psi. They are available in 3 colors. Black with a Blue interior layer, Blue with a Red interior layer, and Red with a Black interior layer. These charge pipes fit all S55 powered BMW M3/M4’s.

Show More Show Less

BMW S55 3.0L Silicone Charge pipes - Red

T#:390442

Part#: VPP-S55-SIL-1R

Ships in 10 Business Days

$ 418.99 USD

Add to Wish List

Qty

$ 418.99 USD

Add to Wish List

Upgrade Your S55 Powered BMW with VTT S55 Silicone Charge Pipes

Enhance turbocharger operation efficiency with VTT S55 Silicone Charge Pipes for your BMW. These pipes remove restrictions in the inlet and charge air tract, ensuring a full 2" ID from the turbochargers to the intercooler. Unlike factory pipes, which restrict airflow due to flattening, VTT charge pipes optimize airflow. Constructed of 7-ply wire reinforced silicone, they withstand over 150psi and feature an additional silicone layer for reduced heat soak. Choose from three color options: Black with Blue interior, Blue with Red interior, or Red with Black interior. This kit includes 2 silicone charge pipes, 2 billet turbocharger outlet adapters, and stainless steel clamps for easy installation on all S55 powered BMW M3/M4's.

Benefits:

Eliminates restrictions for efficient turbocharger operation
Provides a full 2" ID from turbochargers to intercooler
Reduces potential heat soak with silicone construction
Durable design tested to over 150psi
Available in 3 color options: Black/Blue, Blue/Red, Red/Black

Show More Show Less

Burger Motorsports High Capacity Intercooler Heat Exchanger - F80 F82...

T#:5788180

Part#: BMS-F-S55HE

Ships on Aug 7, 2026

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

This direct bolt-in intercooler upgrade is a high-quality heavy-duty replacement heat exchanger that dramatically improves turbo/inlet air cooling by providing double the cooling surface area and over three times the fluid volume compared to the factory cooler. The benefits are most noticed during back to back runs at higher boost levels where the factory cooling capacity can be overwhelmed resulting in ignition timing pull and reduced turbo efficiency. Dramatically improves turbo/inlet air cooling Double the cooling surface area of the factory unit No modification install and removal Increases turbo efficiency in extended runs Made in the USA

Show More Show Less

Macht Schnell Intake Charge Scoop Set (Black) - F8X M3/M4

T#:5886935

Part#: 19.12.11XBLK

Ships in 8 Business Days

$ 125.00 USD

Add to Wish List

Qty

$ 125.00 USD

Add to Wish List

Macht Schnell Intake Charge Scoops assist in air delivery by diverting cold, fresh air through the kidney grilles into the airbox. This allows for a noticeable power gain found at higher speeds especially on vehicles equipped with our High Performance Filters. The scoops are constructed from steel and powdercoated, guaranteed to prevent bending and rusting even after years of use. Priced per pair.

Show More Show Less

Macht Schnell Intake Charge Scoop Set (Red) - F8X M3/M4

T#:4662381

Part#: 19.12.11X

Ships in 8 Business Days

$ 125.00 USD

Add to Wish List

Qty

$ 125.00 USD

Add to Wish List

Macht Schnell Intake Charge Scoops assist in air delivery by diverting cold, fresh air through the kidney grilles into the airbox. This allows for a noticeable power gain found at higher speeds especially on vehicles equipped with our High Performance Filters. The scoops are constructed from steel and powdercoated, guaranteed to prevent bending and rusting even after years of use. Priced per pair.

Show More Show Less

VRSF High Flow Upgraded Air Intake Kit - S55

We Price Match - Give Us A Call or Chat!

T#:585202

Part#: 10801010

Back Ordered

$ 279.99 USD

Add to Wish List

Qty

$ 279.99 USD

Add to Wish List

This high flow upgraded air intake kit from VRSF replaces the restrictive OEM intake with a high flowing design. This design retains the OEM cold air ducting, and eliminates the upper portion of the OEM intake. This portion is very restrictive, especially in high RPM ranges. The high flow filter is cleanable and creates a more aggressive intake sound. The kit includes all of the hardware for installation, including couplers, clamps, and filters.

Show More Show Less

VRSF Front Facing Air Intakes - S55

We Price Match - Give Us A Call or Chat!

T#:585034

Part#: 10801020

Back Ordered

$ 449.99 USD

Add to Wish List

Qty

$ 449.99 USD

Add to Wish List

Replace your restrictive OEM air intake with this high flow designed intake from VRSF. This intake kit places the filters directly behind the front grill, increasing induction sound and preventing heat soak from the radiant engine bay heat. The VRSF intake is constructed from mandrel bent 3" aluminum tubing and includes CNC billet aluminum MAF and vacuum flanges.

Show More Show Less

Active Autowerke Cnc Aftercooler Cooling Kit - F8x S55

T#:5886968

Part#: 15-012

Ships in 3 Business Days

$ 2,849.99 USD

Add to Wish List

Qty

$ 2,849.99 USD

Add to Wish List

BMW's S55 motor is a modern marvel but one weak point, which Active identified is the entire cooling system for the intake which comprises the charge pipe, the aftercooler and the heat exchanger (or radiator). Finally there is a S55 aftercooler kit upgrade that is good enough to carry the Active Autowerke brand. Years of success in developing cars for motorsport has allowed Active to leverage its expertise to the top-mount charge air cooler on the F80 M3, F82 M4 and F87 M2 Competition. This aftercooler was made for the S55 and crafted using only high-grade aluminum to outperform the factory aftercooler in all situations from everyday driving to the toughest racing. The factory cooler was built to support a specific power target and environment. Many of you have increased the performance of the S55 which quickly overwhelms the stock cooler leading to heat soak and higher intake air temperatures which triggers the ECU to downgrade the performance until cooler air returns. Active's focus was not on a mass-market aesthetic add-on but a properly engineered improvement over the existing hardware. Active uses a tube-and-fin core designed specifically for the S55 and included turbulators to maximize the cooling efficiency in as small a package as possible. The end tanks are billet machined aluminum, not cast, folded, or bonded and ensure even distribution of the water throughout the internal aftercooler cores. High precision fittings, CNC machining, and TIG welding throughout ensures the highest quality construction to prevent pressure loss, and the lowest weight, in a bolt-on replacement. But Active also didn’t leave the aesthetics by the wayside as we dip the visible top of the aftercooler in a carbon fiber coating giving your installed cooling system a decidedly top market look to match the improved cooling performance. The Active silicone charge pipes for the F80 M3, F82/F83 M4 and the F87 M2 Competition improve the flow over the stock, compressed plastic pipes. The Active Silicone Charge Pipes allow you to maximize power on your F8X by securing all the boost that your S55 is making. These pipes replace the hot-side pipes leaving the turbos and into the top-mount aftercooler. The stock S55 charge pipes are notorious for developing hairline fractures at their plastic seams. These fractures or cracks are unnoticeable to the naked eye, but under boost pressure they open up leaking the desired charged air into the engine bay, and consequently can rob your S55 of it's full power potential. In addition, these leaks can trigger your S55's turbochargers to work harder to hit and maintain target boost pressure, potentially wearing them out sooner. Active uses silicone in this area because it will not contribute to heat soak and it's easier to mold for the correct clearances. Active uses a 5-layer silicone hose with all needed adapters and stainless hose clamps included. It fits perfectly with our CNC’d top-mount cooler.

Show More Show Less

Vargas Silicone Charge Pipes - Blue - BMW F8X M2, M3, M4

T#:51813336

Part#: VTT-S55-SIL-1-BL

Ships in 10 Business Days

$ 409.99 USD

Add to Wish List

Qty

$ 409.99 USD

Add to Wish List

Upgrade your S55 engine's breathability with the VTT Silicone Charge Pipe Bundle in blue.

Vargas Silicone Charge Pipes - Red - BMW F8X M2, M3, M4

T#:51813337

Part#: VTT-S55-SIL-1-RD

Ships in 10 Business Days

$ 409.99 USD

Add to Wish List

Qty

$ 409.99 USD

Add to Wish List

Upgrade your engine bay’s durability and style with the Vargas Red Silicone Charge Pipe.

Project Cars

SELECT YOUR BMW

BMW Intake Parts for BMW F83 M4 S55 3.0L

Sub-Categories

VRSF Upgraded Cold Side J Pipe Charge Pipe - S55 F8X F87

VRSF Charge Pipe Upgrade Kit - S55

Top Mount Intercooler Upgrade - S55

BMC Performance Air Filter - F06 F10 F12 F80/2 M3 M4 M5 M6

S55 Front Mount Heat Exchanger - F8X S55

Vargas Turbo Silicone Charge pipes - Blue - S55

BMW S55 3.0L Silicone Charge pipes - Red

Upgrade Your S55 Powered BMW with VTT S55 Silicone Charge Pipes

Benefits:

Burger Motorsports High Capacity Intercooler Heat Exchanger - F80 F82...

Macht Schnell Intake Charge Scoop Set (Black) - F8X M3/M4

Macht Schnell Intake Charge Scoop Set (Red) - F8X M3/M4

VRSF High Flow Upgraded Air Intake Kit - S55

VRSF Front Facing Air Intakes - S55

Active Autowerke Cnc Aftercooler Cooling Kit - F8x S55

Vargas Silicone Charge Pipes - Blue - BMW F8X M2, M3, M4

Vargas Silicone Charge Pipes - Red - BMW F8X M2, M3, M4

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Narrow Results