BMW Control Arm Replacements & Upgrades for BMW F83 M4 S55 3.0L

Clear BMW chassis

Please ensure your correct model is selected

Control arms, and their integrated ball joints, are some of the most crucial components on a BMW suspension. The control arms literally control the wheel and suspension as they go through their range of motions. They do more than just keep the alignment in a constant spec - they are a vital locating component for the suspension itself. A faulty or worn control arm or ball joint is a very dangerous and potentially life-threatening problem so make sure they are inspected and replaced at regular intervals.

Most control arms for BMWs consist of an inner and outer ball joint made of plastic, rubber, Delrin, or metal and covered in grease with a rubber boot to seal it from the outside. The ball joint rotates and spins as the control arm goes through its movements and that will wear the ball joint and make it loose. The grease inside the housing can also get used up, evaporate, or become contaminated from moisture and foreign particles. As the ball joint becomes worn it can result in excess movement within the housing. Your steering and handling will become less precise and there is usually a light clunking or clicking sound. In rare and extreme cases the ball joint can separate from the control arm completely, leading to a total loss of suspension and steering control. You should have the ball joint play checked annually and replace them every 3-4 years. Most track organizations will not allow a car if they are older than three years.

Control arms also take abuse from impacts and handling forces. Aluminum control arms will generally bend and prevent an accurate alignment. Steel control arms will crack and fracture and require close inspection annually and replacement every 3-4 years.

We sell OE BMW, OEM, and performance upgrade control arms from proven manufacturers. The control arm is so important to a BMW suspension that we insist on only top quality brands and designs and will never sell a control arm based on price alone. We also have upgrade packages with superior designs and better bushing options and we have bundled these together with valuable package savings.

Sub-Categories

Sort By:
Turner Monoball Thrust Arm Bearing Set - F8x M2/M3/M4
Turner Monoball Thrust Arm Bearing Set - F8x M2/M3/M4
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Turner Motorsport - Corporate Logo
T#:397172
Part#: 023671TMS01
In Stock
Sale - Save 20% $ 464.99

This product was last offered at the strikethrough price on
06-13-2026

$ 371.99 USD
Free Shipping
Add to Wish List
Sale - Save 20%
$ 464.99

This product was last offered at the strikethrough price on
06-13-2026

$ 371.99 USD
Free Shipping
Add to Wish List
BMW’s are known to have failure prone front thrust arm bushings. The flexible rubber bushings, even those found in M performance models, allow significant movement of the front wheels to maximize daily driving comfort, but also allow considerable alignment change. This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience. Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure.
Show More Show Less
Turner Motorsport Thrust Arm Monoball Upgrade - Pre-installed Arms - F8x M2/M3/M4
Turner Motorsport Thrust Arm Monoball Upgrade - Pre-installed Arms - ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Turner Motorsport - Corporate Logo
T#:401100
Part#: 023671TMS01-02
In Stock
Sale - Save 5% $ 840.99

This product was last offered at the strikethrough price on
06-14-2026

$ 798.94 USD
Free Shipping
Add to Wish List
Sale - Save 5%
$ 840.99

This product was last offered at the strikethrough price on
06-14-2026

$ 798.94 USD
Free Shipping
Add to Wish List
BMW’s are known to have failure prone front thrust arm bushings. The flexible rubber bushings, even those found in M performance models, allow significant movement of the front wheels to maximize daily driving comfort, but also allow considerable alignment change. This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience. Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure.
Show More Show Less
Turner Performance Adjustable Front Lower Control Arms - F87 M2, F80 M3, F82/83 M4
Turner Performance Adjustable Front Lower Control Arms - F87 M2, F80 ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Turner Motorsport - Corporate Logo
T#:588022
Part#: 025990TMS03
In Stock
Sale - Save 3% $ 937.99

This product was last offered at the strikethrough price on
06-14-2026

$ 909.85 USD
Free Shipping
Add to Wish List
Sale - Save 3%
$ 937.99

This product was last offered at the strikethrough price on
06-14-2026

$ 909.85 USD
Free Shipping
Add to Wish List
Looking for upgraded lower control arms that don't limit adjustment capabilities like the OE control arms? These Turner Performance Lower Control Arms may be exactly what you need! These CNC'd billet aluminum control arms allow you to adjust roll center, camber, and track width easily and lock in your adjustments securely. The construction of these control arms allows for significant weight savings, reducing unsprung weight, while maintaining high levels of strength that is up to track use and abuse. Instead of using traditional jam nuts, these Turner Control Arms utilize a pinch bolt and rotating clamp design that allows high clamping forces to lock in track width and camper specifications without making it difficult to keep bearings properly aligned. Stainless steel spacers are included to enable roll center correction for lowered vehicles. To further improve control arm operation over the OE design, these control arms use FK rod ends and high misalignment solid spherical bushings to get rid of binding and flex. Features: Lightweight Aluminum, Titanium, Chromoly and Stainless Steel construction Correct ball joint angle for full articulation Clamp design allows for easy access to lock down your alignment settings Low friction 3-piece Teflon lined FK spherical bushings and Heim joints/rod ends Multiple size stainless steel roll center spacers for precise adjustment
Show More Show Less
G8X / F8X Adjustable Toe Arm Set | Fall-Line Motorsports - Standard
G8X / F8X Adjustable Toe Arm Set | Fall-Line Motorsports - Standard ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Fall Line - Corporate Logo
T#:27938407
Part#: FLM-G8X-1FECOTOE
In Stock
$ 329.99 USD
Free Shipping
Add to Wish List
$ 329.99 USD
Free Shipping
Add to Wish List

G8X / F8X Adjustable Toe Arm Set | Fall-Line Motorsports - Standard by Turner Motorsport is crafted to enhance the alignment process for BMW enthusiasts. Made in the USA, this standard toe link kit facilitates rapid toe adjustments during alignment, and when combined with the tension strut, it also allows for precise track adjustments. Designed for easy fitment, these arms simplify wheel alignment and camber adjustment, making the setup process quicker and more efficient.

  • Enhanced Alignment: Enables fast and precise toe adjustments for improved wheel fitment.
  • Track Adjustment: Works in conjunction with the tension strut for overall track adjustments.
  • Simplified Setup: Eases camber adjustment and simplifies alignment processes.
  • Direct Replacement: Matches OEM part number 33322284534 // 33-32-2-284-534.
  • Multi-Link Suspension Compatibility: Handles dynamic changes in alignment settings effectively.

Fits:

  • G80 / G81 / G82 / G83 M3 & M4
  • F80 / F82 M3 & M4
  • G87 M2
  • F87 M2
Show More Show Less
Turner Monoball Rear Upper Control Arm Bushings - F8x M2, M2 Comp, M3, M4
Turner Monoball Rear Upper Control Arm Bushings - F8x M2, M2 Comp, M3...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Turner Motorsport - Corporate Logo
T#:2104260
Part#: 006261LA01
In Stock
Sale - Save 10% $ 354.99

This product was last offered at the strikethrough price on
06-14-2026

$ 319.49 USD
Free Shipping
Add to Wish List
Sale - Save 10%
$ 354.99

This product was last offered at the strikethrough price on
06-14-2026

$ 319.49 USD
Free Shipping
Add to Wish List
BMW’s are known to have failure prone rear control arm bushings. The flexible rubber bushings, even those found in M performance models, allow significant movement of the rear wheels to maximize daily driving comfort, but also allow considerable alignment change. This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience. Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure. For the enthusiast looking for superior performance and longevity with a crisp, confidence-inspiring driving experience, our sealed ball joint monoballs are the best solution available! Our experience with spherical front control arm ball joints go back to those we designed and used in our IMSA E90 328i and E92 M3 racecars (GS class Champions in 2011). We wanted to offer F80, F82, F83, and F87 owners similar levels of handling precision and control for the track and street. The bearing housing is precision CNC machined from 6061-T6 anodized aluminum and features a knurled OD to ensure a perfect press fit, and utilize a sealed OEM BMW ball joint for exceptional quality and durability, making them completely at home on both the street and track with no compromise. We have done extensive street, autocross, and track testing to ensure the ball joint used in this bushing design excels in each setting. The advantage of a sealed ball joint is that it eliminates all unwanted deflection while still allowing complete bind-free movement throughout suspension travel, resulting in exceptional control of wheel alignment. What you get is superior steering precision, turn-in response, direct braking feedback, and better handling. In short, if you're seeking the ultimate in precise, predictable handling and control, with crisp braking response and a long service life that’s equally at home on the street or track - look no further. We have you covered. We offer these control arms with the monoball bushings pre-installed for your convenience. Since BMW recommends the control arms be replaced for every other bushing change, we prefer to sell these as a pre-assembled set. The bushings are also available separately if you wish to source your own control arms. Features: Bearing housing Precision CNC machined from 6061-T6 blue anodized aluminum Knurled OD to provide the perfect fit for the wide range of thrust arm bore diameters among brands. CNC machined 304ss ball joint sleeve inserts, providing a precision fit between the ball joint and the subframe. Bearing OEM BMW sealed and greased ball joint for exceptional durability and service life. Performance Nearly instantaneous, crisp steering and braking response. Maintenance free, long lasting performance. Improved road feel without undesirable NVH.
Show More Show Less
Turner Motorsport Performance Rear Upper Control Arms - F8X M2 M3 M4
Turner Motorsport Performance Rear Upper Control Arms - F8X M2 M3 M4 ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Turner Motorsport - Corporate Logo
T#:637367
Part#: 025990TMS012
In Stock
Sale - Save 12% $ 1,062.99

This product was last offered at the strikethrough price on
05-03-2026

$ 939.22 USD
Free Shipping
Add to Wish List
Sale - Save 12%
$ 1,062.99

This product was last offered at the strikethrough price on
05-03-2026

$ 939.22 USD
Free Shipping
Add to Wish List
Eliminate sloppy handling with Turner's performance control arms!
Turner Adjustable Toe Arms w/ Eccentric Lockout Plates - F80, F82, G80, G82, G87
Turner Adjustable Toe Arms w/ Eccentric Lockout Plates - F80, F82, G8...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Turner Motorsport - Corporate Logo
T#:587754
Part#: 23672TMS03
In Stock
Starting at $ 432.99 USD
Free Shipping
Add to Wish List
Starting at $ 432.99 USD
Free Shipping
Add to Wish List
Eliminates any unwanted movement in the rear end associated with the the cumbersome factory eccentric toe adjustment point, opening up a wider range of adjustment for your alignment needs!
Performance Adjustable Rear Toe Links - BMW F8X M2 M3 M4, G8X M3 M4 Base & Competition
Performance Adjustable Rear Toe Links - BMW F8X M2 M3 M4, G8X M3 M4 B...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Turner Motorsport - Corporate Logo
T#:5471051
Part#: 00501TMS09
In Stock
Sale - Save 5% $ 523.99

This product was last offered at the strikethrough price on
06-14-2026

$ 497.79 USD
Free Shipping
Add to Wish List
Sale - Save 5%
$ 523.99

This product was last offered at the strikethrough price on
06-14-2026

$ 497.79 USD
Free Shipping
Add to Wish List
The stock Genuine BMW rear toe links (33322284534) are great for standard daily driving and occasional spirited driving, but they tend to fall flat on the track due to the soft rubber bushings causing excess deflection, creating undesirable handling characteristics, not to mention insufficient adjustability. Turner's new Performance Rear Toe Links increase stability and response by eliminating bushing deflection while providing an increased range of rear toe adjustment, necessary for lowered cars or for performance alignments. Even small changes to ride height and camber will effect toe settings, and the wide range of adjustment allows you to maximize grip on a track car and extend tire life on a street car. The factory rear toe arms utilize an eccentric bolt and washer for adjustment and lack precision and range. These toe links feature gun drilled 2024 Aluminum center links, clamps, and clevises, along with a 360-degree rotating clamp system. This combination provides superior strength, performance, durability, and ease of adjustment. No annoying jam nuts! A simple 3/16" Allen-key is all that is required to lock down your alignment settings. Best if tightened to 73.7 ft. lbs. (100 N/M). DO NOT OVERTORQUE! ECS is not liable for any issues due to overtorque. FK Spherical Rod Ends are utilized to reduce alignment change in the rear suspension under hard cornering, acceleration, and braking. They feature a Teflon liner to provide quiet operation, low friction, smooth articulation, and eliminate bushing deflection under load. The PTFE liner is chemically bonded to the inner diameter of the race, offering a very high load carrying capacity and greatly increased dynamic wear characteristics. Rear Traction Links Features: Gun drilled 2024 Aluminum Links to reduce unsprung weight 6061-T6 Aluminum Rotating Clamp design Low friction 3-piece Teflon lined FK Heim joints/Rod Ends Sold as a pair Made in the USA
Show More Show Less
Performance Adjustable Rear Traction Links - BMW F8X M2 M3 M4, G8X M3 M4 Base & Competition
Performance Adjustable Rear Traction Links - BMW F8X M2 M3 M4, G8X M3...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Turner Motorsport - Corporate Logo
T#:5471050
Part#: 00501TMS08
In Stock
$ 512.99

This product was last offered at the strikethrough price on
05-03-2026

$ 421.99 USD
Limited Qty Sale
Free Shipping
Add to Wish List
$ 512.99

This product was last offered at the strikethrough price on
05-03-2026

$ 421.99 USD
Limited Qty Sale
Free Shipping
Add to Wish List
The stock Genuine BMW rear trailing arms (33322284534) are great for standard daily driving and occasional spirited driving, but they tend to fall flat on the track due to the soft rubber bushings causing excess deflection, creating undesirable handling characteristics, not to mention insufficient adjustability. Turner's new Performance Rear Traction Links increase stability and response by eliminating bushing deflection under hard acceleration and braking and help to reduce wheel hop on hard launches. Thanks to their adjustable design, these allow fine tuning of rear bumpsteer and anti-squat characteristics. These arms are designed for use in high-performance street and race vehicles. These traction links feature gun drilled 2024 Aluminum center links, clamps, and clevises, along with a 360-degree rotating clamp system. This combination provides superior strength, performance, durability, and ease of adjustment. No annoying jam nuts! A simple 3/16" Allen-key is all that is required to lock down your alignment settings. FK Spherical Rod Ends are utilized to reduce alignment change in the rear suspension under hard cornering, acceleration, and braking. They feature a Teflon liner to provide quiet operation, low friction, smooth articulation, and eliminate bushing deflection under load. The PTFE liner is chemically bonded to the inner diameter of the race, offering a very high load carrying capacity and greatly increased dynamic wear characteristics. Rear Traction Links Features: Gun drilled 2024 Aluminum Links to reduce unsprung weight 6061-T6 Aluminum Rotating Clamp design Low friction 3-piece Teflon lined FK Heim joints/Rod Ends Sold as a pair Made in the USA
Show More Show Less
Fall-Line Motorsports Lower Coil Over Camber Arm & Shim Set - G8X / F8X / E9X M3
Fall-Line Motorsports Lower Coil Over Camber Arm & Shim Set - G8X / F...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Fall Line - Corporate Logo
T#:20979735
Part#: F8X/E9X-1FLCOCA
Ships in 1 Business Day
$ 995.00 USD
Free Shipping
Add to Wish List
$ 995.00 USD
Free Shipping
Add to Wish List
*NOTE: ONLY FOR CARS WITH TRUE REAR COIL OVER CONVERSION - NOT COMPATIBLE WITH STOCK REAR SPRINGS* Fall-Line Motorsports has taken everything they've learned in manufacturing over the last decade to create an ultra-high-end interpretation of the G8X / F8X M2 M3 M4 and E9X M3 lower camber arm. Fall-Line's bespoke version discards the deformation-prone stamped steel arm that includes a provision for the rear coil spring in favor of 5-axis CNC machined, billet aluminum that eliminates the rear coil mount. This pair has been gorgeously crafted and pocketed (to save weight without compromising rigidity) and is hard coat black anodized for ultimate resistance to wear. So too has the hardware been given an upgrade—10.9 grade corrosion-resistant extended bolts are included to replace the inferior factory pieces. These arms represent another exciting entry into the often neglected F8X / E9X suspension arm market and add valuable peace of mind for street or motorsport duty from the undisputed champion within the BMW realm. Product Details: For all G8X, F8X, and E9X M3 cars using TRUE Rear Coil Over Conversion ONLY DMG Mori 5-Axis CNC machined, billet aluminum construction Hard coat black anodized Includes Camber Shim Set Sold in pairs
Show More Show Less
Rear Upper Control Arm Set - F8X
Rear Upper Control Arm Set - F8X
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Fall Line - Corporate Logo
T#:5580939
Part#: FLM-F8XWUAK
In Stock
$ 1,040.00

This product was last offered at the strikethrough price on
05-19-2026

$ 990.99 USD
Limited Qty Sale
Free Shipping
Add to Wish List
$ 1,040.00

This product was last offered at the strikethrough price on
05-19-2026

$ 990.99 USD
Limited Qty Sale
Free Shipping
Add to Wish List
These upper wishbones boast two major benefits: replace the OEM rubber bushings with spherical units and add valuable adjustability versus the standard, fixed arm. The new adjustment capabilities allow ultra fine-tuning within the full-suspension suite—the more consistent suspension geometry, amongst other benefits, results in significantly improved performance and confidence in all driving conditions.
Show More Show Less
Fall-Line Motorsports G8X / F8X Rear Lower Tension / Fixed Toe Arm Set
Fall-Line Motorsports G8X / F8X Rear Lower Tension / Fixed Toe Arm Se...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Fall Line - Corporate Logo
T#:27938408
Part#: FLM-G8X-1FRTAK
Ships in 3 Business Days
$ 679.99 USD
Free Shipping
Add to Wish List
$ 679.99 USD
Free Shipping
Add to Wish List
This item can function as the Rear Lower Tension Arm, as well as a Fixed Toe Arm. This SKU replaces OEM BMW Part number: 33322284534 Experience championship-level performance with Fall-Line Motorsports' precision-engineered suspension components. Crafted from aircraft-grade billet aluminum and finished with military-spec hard coat anodizing, these components are designed to elevate your driving experience to victory. Improved Handling and Durability Fall-Line's F8X / G8X lower tension arms and fixed toe arms are built to excel in motorsport conditions. Their CNC-machined, one-piece construction ensures both strength and longevity. Featuring the largest FK spherical bearings on the market, these arms eliminate rubber from critical areas, giving you ultimate control over your car's tire behavior and enhancing your confidence behind the wheel. Stainless steel spiral locks provide 360-degree clamping force for a secure fit under competition-level loads. Long-Lasting Performance Our spherical bearings outlast OEM rubber variants, sparing you the hassle of repeated replacements. While these suspension upgrades offer improved feedback and handling, they may result in a slight increase in noise, vibration, and harshness. Product Details: Compatible with all G8X and F8X M cars DMG Mori 5-Axis CNC machined 6061-T6 aluminum Full stainless bearing assembly (hats, bearing, housing, spiral locks) Sold in pairs; designed to replace rear trailing/tension arms (BMW Part Number: 33-32-2-284-534) MIL Spec hard coat clear anodizing Made in the USA Fixed toe arms retain factory Eccentric bolt adjustment
Show More Show Less
Fall-Line Motorsports Front Mono Ball Conversion Kit - F87 M2
Fall-Line Motorsports Front Mono Ball Conversion Kit - F87 M2 ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Fall Line - Corporate Logo
T#:598880
Part#: FLM-F87-1BUNI
Ships in 1 Business Day
$ 423.00 USD
Free Shipping
Add to Wish List
$ 423.00 USD
Free Shipping
Add to Wish List
Fall Line’s mono ball spherical bearing conversion kit transforms the front steering and suspension feel of the M2. The factory rubber bushing is very large, and is prone to substantial deflection under load, as the M2 is put through its paces. Deflection of the bushing can create unwanted geometry change, steering wobble under braking, and even hysteresis of the thrust arm. The bearing’s housing is precision machine from aluminum, to create a rigid part that allows for the M2’s thrust arm to move smoothly through its range of suspension travel. The improvement in steering and suspension feel is immediate and truly enhances the personality of the M2.
Show More Show Less
Fall-Line Motorsports F8X M2 / M3 / M4 Rear Upper Control Arm Set
Fall-Line Motorsports F8X M2 / M3 / M4 Rear Upper Control Arm Set ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Fall Line - Corporate Logo
T#:28038190
Part#: FLM-F8X-1FWUAK
Ships in 3 Business Days
$ 1,040.00 USD
Free Shipping
Add to Wish List
$ 1,040.00 USD
Free Shipping
Add to Wish List
From years of competitive race experience, Fall-Line has become synonymous with producing not only championship caliber race cars, but the finest suspension components that help propel them to victory. As the final piece within Fall-Line’s suite of rear suspension offerings for the F8X M2 / M3 / M4, these upper wishbones boast two major benefits: replace the OEM rubber bushings with spherical units and add valuable adjustability versus the standard, fixed arm. The new adjustment capabilities allow ultra fine tuning within the full suspension suite—the more consistent suspension geometry, amongst other benefits, results in significantly improved performance and confidence in all driving conditions. These arms are direct replacements for BMW Part No. 33322284777. The F8X cars will notice an immediate difference due to its unique subframe and chassis relationship—torsional rigidity is further improved with the addition of these arms with only marginal increases in NVH. As an added benefit, the spherical bearings will outlast the OEM rubber variants, saving the headache of repeated replacement over your ownership. Product Details: Fits all F8X M2 / M3 / M4 Motorsport clamp-style fastener for faster, more reliable alignment adjustments Long-life FK spherical bearings Made in USA Replaces OEM BMW Part Numbers: 33-32-2-284-777
Show More Show Less
Turner Motorsport Control Arm Monoball Upgrade Kit
Turner Motorsport Control Arm Monoball Upgrade Kit
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Turner Motorsport - Corporate Logo
T#:2528148
Part#: 006261LA09
In Stock at Vendor
Sale - Save 3% $ 2,028.99

This product was last offered at the strikethrough price on
06-14-2026

$ 1,968.12 USD
Free Shipping
Add to Wish List
Sale - Save 3%
$ 2,028.99

This product was last offered at the strikethrough price on
06-14-2026

$ 1,968.12 USD
Free Shipping
Add to Wish List
BMW’s are known to have failure prone rear control arm bushings. The flexible rubber bushings, even those found in M performance models, allow significant movement of the rear wheels to maximize daily driving comfort, but also allow considerable alignment change. This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience. Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure. For the enthusiast looking for superior performance and longevity with a crisp, confidence-inspiring driving experience, our sealed ball joint monoballs are the best solution available! Our experience with spherical front control arm ball joints go back to those we designed and used in our IMSA E90 328i and E92 M3 racecars (GS class Champions in 2011). We wanted to offer F80, F82, F83, and F87 owners similar levels of handling precision and control for the track and street. The bearing housing is precision CNC machined from 6061-T6 anodized aluminum and features a knurled OD to ensure a perfect press fit, and utilize a sealed OEM BMW ball joint for exceptional quality and durability, making them completely at home on both the street and track with no compromise. We have done extensive street, autocross, and track testing to ensure the ball joint used in this bushing design excels in each setting. The advantage of a sealed ball joint is that it eliminates all unwanted deflection while still allowing complete bind-free movement throughout suspension travel, resulting in exceptional control of wheel alignment. What you get is superior steering precision, turn-in response, direct braking feedback, and better handling. In short, if you're seeking the ultimate in precise, predictable handling and control, with crisp braking response and a long service life that’s equally at home on the street or track - look no further. We have you covered. We offer these control arms with the monoball bushings pre-installed for your convenience. Since BMW recommends the control arms be replaced for every other bushing change, we prefer to sell these as a pre-assembled set. The bushings are also available separately if you wish to source your own control arms. Features: Bearing housing Precision CNC machined from 6061-T6 blue anodized aluminum Knurled OD to provide the perfect fit for the wide range of thrust arm bore diameters among brands. CNC machined 304ss ball joint sleeve inserts, providing a precision fit between the ball joint and the subframe. Bearing OEM BMW sealed and greased ball joint for exceptional durability and service life. Performance Nearly instantaneous, crisp steering and braking response. Maintenance free, long lasting performance. Improved road feel without undesirable NVH.
Show More Show Less
Rod End Boot (14-18mm) - Priced Each
Rod End Boot (14-18mm) - Priced Each
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Turner Motorsport - Corporate Logo
T#:599632
Part#: RERS3
In Stock
$ 27.99

This product was last offered at the strikethrough price on
03-27-2026

$ 19.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 19.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Extend the life of your heim joints with this flexible rubber protective boot. Designed to fit 14mm–18mm spherical bearings and rod ends, it shields critical components from dirt, moisture, and road debris. Keeping contaminants out helps ensure consistent performance and reduces wear over time.
Show More Show Less

Select Vehicle

BMW Mini
Clear Vehicle

Category

Brand

Price

$
$

Special Offers

Shipping