BMW F85 X5 M S63 4.4L

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:

Genuine BMW M Performance - Corporate Logo
T#:13990876
Part#: 82295A56C32
In Stock
10% off MSRP $ 93.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 84.99 USD
Free Shipping on orders $49 and up
10% off MSRP
$ 93.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 84.99 USD
Free Shipping on orders $49 and up
Give your key an extra bit of personality with this M performance key cover decorated in Alcantara, leather, and carbon texture! fits: IX, XM, X7 LCI, G70 7 series
90mm Black M14 BMW 5 Lug Hex Head Stud Kit - APEX
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:26171623
Part#: HW-APX-M14125-90
Ships in 2 Business Days
$ 160.00 USD
Free Shipping
$ 160.00 USD
Free Shipping

Upgrade your BMW race car with a stud conversion kit from [Brand Name] for enhanced strength, safety, and improved pit stop times. Even for non-race cars, stud conversions streamline wheel installation and removal, eliminating the need to align holes before threading lug bolts.

  • Enhanced strength and safety
  • Improved pit stop times
  • Simplified wheel installation and removal
  • Versatility with extended length wheel studs
  • Reduced wear on hub threads
  • Long-term durability and safety
  • Simplified maintenance and improved efficiency
Show More Show Less
Rogue Engineering - Corporate Logo
T#:27105150
Part#: RE.061
In Stock
$ 119.00 USD
Free Shipping
$ 119.00 USD
Free Shipping
You are looking at the BEST license plate bracket for your BMW, price no object! We never understood why BMW would put a cheap, plastic bracket on the back of a BMW to hold a license plate. The screws holding the bracket on would rust, the steel inserts hold the plate on would also rust, causing the hardware holding the plate on to seize or just no longer function. Our bracket fits any BMW that mounts license plates in the rear that use factory part number 51-18-8-238-061. Fits most BMWs produced AFTER 1999. If your vehicle does not use the plastic plate, it will not fit. Does not fit E46 touring (wagon). PROBLEMS with the factory bracket and hardware The screws that secure the plastic bracket are plated steel and will corrode over time. These two screw would normally not be seen since it is under the license plate, but it is holding the bracket onto the trunk. The four (4) nutserts that are pressed into the plastic frame (to hold the license plate) are also steel and will eventually seize with the bolt and just spin in the plastic frame becoming useless. The plastic frame itself is flimsy, doing a near minimal task of holding on the license plate. The hardware securing the plate to the bracket will rust, seizing to the nutsert or even spinning in place becoming completely useless. SOLUTION Create a more robust bracket that would not only be stiffer but also more corrosion resistant; CNC’d aluminum with an anodized finish. We machine a near identical plate, matching factory dimensions, from 1/2" plate of aluminum. Instead of nutserts pressed into plastic, map the correct position and machine the threads for the hardware directly into the plate. The hardware used to secure the new bracket to the trunk would be made from stainless steel (or optional corrosion-proof titanium) The hardware used to secure the license plate to the newly engineered bracket would also be stainless steel (or optional made from titanium) Kit Includes: One (1) Rogue Engineering designed and manufactured CNC'd aluminum license plate bracket Two (2) Stainless screws to secure bracket to trunk. Four (4) stainless screws to secure license plate to bracket.
Show More Show Less

Genuine BMW M Performance - Corporate Logo
T#:13990873
Part#: 82115A75DA7
In Stock
3% off MSRP $ 35.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 33.99 USD
Free Shipping on orders $49 and up
3% off MSRP
$ 35.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 33.99 USD
Free Shipping on orders $49 and up
50th year M valve stem caps

Genuine BMW M Performance - Corporate Logo
T#:13990874
Part#: 82115A75DA6
In Stock
4% off MSRP $ 55.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 52.99 USD
Free Shipping on orders $49 and up
4% off MSRP
$ 55.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 52.99 USD
Free Shipping on orders $49 and up
This stylish and attractive license plate frame is the perfect addition to your BMW.
HJS - Corporate Logo
T#:396285
Part#: 11657620508
In Stock
$ 20.99 USD
Free Shipping on orders $49 and up

BMW N54 N55 N63 S63 HJS V-Band Exhaust Clamp - Priced Each is designed for superior performance and reliability in exhaust system maintenance and upgrades. Engineered by Turner Motorsport, this high-quality clamp ensures a secure and leak-free connection in your BMW's exhaust system.

  • Durable Construction: Made from premium materials to withstand high temperatures and harsh conditions, ensuring long-lasting performance.
  • Precision Fit: Designed to fit perfectly with BMW N54, N55, N63, and S63 engines, offering a secure and reliable seal.
  • Improved Exhaust Efficiency: Prevents leaks and maintains optimal exhaust flow, contributing to better engine performance and efficiency.
  • Easy Installation: The V-band design allows for quick and easy installation or removal, simplifying exhaust system maintenance.
  • Versatile Use: Ideal for both performance upgrades and routine repairs, making it a valuable addition to any BMW enthusiast's toolkit.
Show More Show Less

Genuine BMW M Performance - Corporate Logo
T#:181351
Part#: 51142296551
Ships in 1-2 days
10% off MSRP $ 101.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 90.99 USD
Free Shipping
10% off MSRP
$ 101.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 90.99 USD
Free Shipping
These decals can give your BMW the look you have been craving, calling out the M Performance nature of your vehicle!
Genuine BMW M Performance - Corporate Logo
T#:210512
Part#: 51472353381
Ships in 1-2 days
2% off MSRP $ 203.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 198.99 USD
Free Shipping
2% off MSRP
$ 203.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 198.99 USD
Free Shipping


Genuine BMW Floor Mats 'Performance' Front - Lhd
This item fits the following BMW Chassis:
F15,F16


Genuine BMW M Performance - Corporate Logo
T#:217388
Part#: 82292355519
Ships in 1-2 days
4% off MSRP $ 85.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 81.99 USD
Free Shipping on orders $49 and up
4% off MSRP
$ 85.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 81.99 USD
Free Shipping on orders $49 and up
Genuine Bmw Key Case, M Performance - 82292355519

Autosol - Corporate Logo
T#:580275
Part#: AS7800
Back Ordered
$ 25.99 USD
Free Shipping on orders $49 and up
The proper protection for your convertible top.
Genuine BMW M Performance - Corporate Logo
T#:210511
Part#: 51472353380
In Stock
Sale - Save 8% $ 143.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 133.19 USD
Free Shipping
Sale - Save 8%
$ 143.99

This product was last offered at the strikethrough price on
06-25-2026

$ 133.19 USD
Free Shipping
Upgrade your BMW's floor mats to M Performance floor mats, a subtle change that makes a big difference. This item fits the following BMW Chassis: F15, F85
Genuine BMW M Performance - Corporate Logo
T#:174851
Part#: 35002232278
Ships in 1-2 days
Sale - Save 8% $ 169.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 157.06 USD
Free Shipping
Sale - Save 8%
$ 169.99

This product was last offered at the strikethrough price on
06-25-2026

$ 157.06 USD
Free Shipping

Upgrade the look of your BMWs interior with the M Performance pedals.

 

Genuine BMW Stainless-Steel Pedals - M Performance
This item fits the following BMW Chassis:
F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36

 

Show More Show Less


Genuine BMW M Performance - Corporate Logo
T#:221966
Part#: 51712354930-931
Ships in 1-2 days
$ 358.99 USD
Free Shipping
$ 358.99 USD
Free Shipping
As used on the Turner F85 X5 M Project Car First from Turner. Get all your F85 X5M parts as soon as they become available. These direct replacement side vent covers let you eliminate the stock chrome fender vents, feature perfect fit and beautiful finish, and give a darker more aggressive look to your 2015+ F85 X5M. Set includes two matching black vents, left and right. Includes 51712354930 & 51712354931Made from impact resistant long life ABS polymer, these are Genuine BMW M Performance grills so a perfect fit is guaranteed. 

This item fits the following BMWs:
2015+ F85 BMW   X5 M not for cars with Night Vision
Show More Show Less
APEX EC-7 19x9.5" ET22 Satin Black Wheel 22.9lbs
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:201362
Part#: EC71995ET22SMBK
Ships in 5 Business Days
$ 459.00 USD
$ 459.00 USD
19x10" ET25 APEX EC-7 Wheel 23.5lbs.
Wheel Specs
Fitment:Mostly Rear
Size:19x9.5"
Offset (mm):22
Weight (lbs):22.9
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX EC-7 19x10" ET25 Anthracite Wheel 23.5lbs
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:201373
Part#: EC71910ET25AN
Ships in 5 Business Days
$ 469.00 USD
Free Shipping
$ 469.00 USD
Free Shipping
19x10" ET25 APEX EC-7 Wheel 23.5lbs.
Wheel Specs
Fitment:Mostly Rear
Size:19x10"
Offset (mm):25
Weight (lbs):23.5
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

Genuine BMW M Performance - Corporate Logo
T#:383960
Part#: 51712354497KT
Ships in 1-2 days
$ 507.99 USD
Free Shipping
$ 507.99 USD
Free Shipping
Get all your F85 X5M parts as soon as they become available. These direct replacement center grills let you eliminate the stock chrome kidney/center grills, feature perfect fit and beautiful finish, and give a darker more aggressive look to your 2015+ F85 X5M. Set includes two matching black grills, left and right. Includes 51712354498 & 51712354497 Made from impact-resistant long life ABS polymer, these are Genuine BMW M Performance grills so a perfect fit is guaranteed.
Show More Show Less
Genuine BMW M Performance - Corporate Logo
T#:544966
Part#: 61432450841
Ships in 1-2 days
3% off MSRP $ 316.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 304.99 USD
Free Shipping
3% off MSRP
$ 316.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 304.99 USD
Free Shipping
This Genuine BMW M Performance Drive Analyser allows you to transmit vehicle performance data to your smartphone.

Genuine BMW M Performance - Corporate Logo
T#:383961
Part#: 51712354930KT
Ships in 1-2 days
$ 358.99 USD
Free Shipping
$ 358.99 USD
Free Shipping
Genuine BMW M Performance - Corporate Logo
T#:210589
Part#: 51712354498
Ships in 1-2 days
4% off MSRP $ 264.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 253.99 USD
Free Shipping
4% off MSRP
$ 264.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 253.99 USD
Free Shipping
Genuine BMW Trim Grill, High-Gloss Black

Genuine BMW M Performance - Corporate Logo
T#:210588
Part#: 51712354497
Ships in 1-2 days
4% off MSRP $ 264.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 253.99 USD
Free Shipping
4% off MSRP
$ 264.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 253.99 USD
Free Shipping
Genuine BMW Trim Grill, High-Gloss Black

Genuine BMW M Performance - Corporate Logo
T#:221967
Part#: 51162361520-521
Ships in 6 Business Days
$ 1,194.99 USD
Free Shipping
$ 1,194.99 USD
Free Shipping
These Genuine BMW M Performance Carbon Fiber Mirror Covers are designed for the BMW F85 X5M and F86 X6M This kit includes both the left and right side mirrors. Part numbers 51162361520 & 51162361521

This item fits the following BMWs:
2015+ F85 BMW X5 M
2015+ F86 BMW X6 M
Show More Show Less
Autosol - Corporate Logo
T#:16450
Part#: 7950
Ships in 9 Business Days
$ 60.99 USD
Free Shipping on orders $49 and up
Autosol's Convertible Top Cleaning Kit is a complete restoration kit for your canvas convertible top and plastic rear window. This package is an all-in-one solution for cleaning and protecting the fabric convertible top. Package includes Convertible Top Cleaner, Convertible Top Impregnating Agent (sealant and protectant), and Plastic Scratch Remover. First use the cleaner to remove dirt and stains. Then follow-up with the fabric treatment to preserve the color and protect against UV damage. Remove scratches, clean, and polish the plastic window back to its original clarity. Autosol is Made in Germany, and an OEM supplier to BMW for many of their Genuine BMW car care products.
Show More Show Less
Akrapovic - Corporate Logo
T#:391371
Part#: S-BM/T/1
Back Ordered
$ 9,111.99 USD
Free Shipping
$ 9,111.99 USD
Free Shipping

The Akrapovic Cat-back Titanium exhaust system for the BMW X5/X6 M is designed for drivers who demand more power and less weight. In addition to weight reduction and a power gain, one of the tasks of the Akrapovic team was also to make the sound of the X5/X6 M become music to ones ears. An optional wireless "dualmode" exhaust flap control allows the vehicle to have a more civilized, but deeper than stock sound at low speed. However, when the exhaust flap is opened the muffler is bypassed, creating a deep and sporty sound much more in keeping with the personality of the car.

Power gains come in at 5.3 hp (at 5300 RPM) and 8.4 Nm (at 5250 RPM) with just the exhaust alone, and a total weight savings of 32.7 lbs! That is a 42% overall reduced difference in weight from stock.

Not for sale outside the US or Canada.

This item fits the following BMWs:
2015+ F85 BMW X5 M
2015+ F86 BMW X6 M

Show More Show Less


APR Black Valve Stem Caps - Pack of 4
Call In Or Chat For Best Price!
Call In, Chat, Or Email, For Best Price! Limited Time Only!
APR - Corporate Logo
T#:22987107
Part#: MS100197
In Stock
11% off MSRP $ 17.94

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.95 USD
Free Shipping on orders $49 and up
11% off MSRP
$ 17.94

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.95 USD
Free Shipping on orders $49 and up

APR Black Valve Stem Caps are a stylish and functional upgrade for your vehicle's wheels. Sold as a set of four, these high-quality aluminum caps feature an engraved APR logo on each cap. Designed to add a touch of customization to your vehicle, they also serve a practical purpose.

  • Premium Quality: Made from durable aluminum for long-lasting performance.
  • Enhanced Aesthetics: Features an engraved APR logo for a sleek and stylish look.
  • Functional Design: Helps protect valve stems from dirt and moisture.
  • Easy Installation: Simple to install and compatible with most standard valve stems.

Upgrade your vehicle with APR Black Valve Stem Caps to enhance both style and functionality.

Show More Show Less
Autosol - Corporate Logo
T#:580258
Part#: AS1040
In Stock
$ 11.99 USD
Free Shipping on orders $49 and up
Restores color and luster to leather while removing stains.
Autosol - Corporate Logo
T#:580273
Part#: AS6500
In Stock
$ 9.99 USD
Free Shipping on orders $49 and up
Rubber Seal Treatment / Frost Preventative

APR Valve Stem Caps - Set Of 4 - Gunmetal
Call In Or Chat For Best Price!
APR - Corporate Logo
T#:31092523
Part#: MS100179
In Stock
11% off MSRP $ 17.94

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.95 USD
Free Shipping
11% off MSRP
$ 17.94

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.95 USD
Free Shipping

APR Valve Stem Caps - Set Of 4 - Gunmetal offer a stylish and functional upgrade for any vehicle. These high-quality aluminum valve stem caps come in a sleek gunmetal finish and feature an engraved APR logo, which adds a touch of sophistication to your wheels.

  • Material: Made from durable aluminum for long-lasting performance
  • Design: Engraved APR logo adds a distinctive look
  • Finish: Gunmetal color enhances the visual appeal of your wheels
  • Set Includes: 4 valve stem caps for a complete upgrade
  • Compatibility: Fits most standard valve stems

These APR Valve Stem Caps are designed to provide both aesthetics and durability, making them a great choice for enhancing your vehicle's style.

Show More Show Less

APR Valve Stem Caps - Set Of 4 - Silver
Call In Or Chat For Best Price!
APR - Corporate Logo
T#:31125602
Part#: MS100178
In Stock
11% off MSRP $ 17.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.99 USD
Free Shipping
11% off MSRP
$ 17.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.99 USD
Free Shipping

APR Valve Stem Caps - Set Of 4 - Silver are a stylish and functional upgrade for any vehicle. This set includes four high-quality aluminum valve stem caps, each engraved with the distinctive APR logo. These caps are designed to enhance the appearance of your wheels while providing durability and reliability.

  • Stylish Appearance: Each cap features a sleek silver finish and an engraved APR logo, adding a touch of elegance to your vehicle.
  • Durable Construction: Made from high-quality aluminum, these valve stem caps are built to withstand harsh conditions and resist corrosion.
  • Easy Installation: Simple to install and compatible with most standard valve stems.
  • Enhanced Wheel Aesthetics: Upgrades the look of your wheels with a subtle yet impactful design.
  • Functional Protection: Helps protect valve stems from dirt and moisture, ensuring consistent performance.

This set of valve stem caps is an excellent choice for anyone looking to add a refined touch to their vehicle's wheels.

Show More Show Less
APEX Solid Gloss Black BMW Center Caps - Priced Each
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:639899
Part#: HW-APX-CAP-BLK
Ships in 9 Business Days
$ 9.99 USD
Free Shipping
$ 9.99 USD
Free Shipping

HJS - Corporate Logo
T#:37622243
Part#: 18307560781
In Stock at Vendor
$ 44.99

This product was last offered at the strikethrough price on
05-07-2026

$ 39.99 USD
Free Shipping on orders $49 and up
$ 39.99 USD
Free Shipping on orders $49 and up

Dual clamp pipe connector joins exhaust pipes without welding. Split, compressible design clamps tightly around joined pipes for a leak-free fit. Includes hardware.

76.2mm (3.00 inch) diameter.

Show More Show Less
APEX EC-7 19x10.5" ET22 Anthracite Wheel 23.9lbs
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:201376
Part#: EC719105ET22AN
Ships in 5 Business Days
$ 479.00 USD
$ 479.00 USD
19x10.5" ET22 APEX EC-7 Wheel 23.9lbs.
Wheel Specs
Fitment:Front or Rear
Size:19x10.5"
Offset (mm):22
Weight (lbs):23.9
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX Wheels Metal Valve Stem - Anthracite - BMW & MINI
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:593645
Part#: HW-OEM-VALVE-GM
Ships in 2 Business Days
$ 15.00 USD
Free Shipping
$ 15.00 USD
Free Shipping
APEX Wheels metal valve stems come in 3 colors that compliment wheels in any finish. Made in Germany, they are guaranteed to fit OEM Huf/Beru TPMS sensors and can also be installed without them. Valve stems are sold individually Made in Germany Guaranteed to fit APEX wheels, and also work with a variety of OEM and aftermarket wheels Guaranteed to fit OEM Huf/Beru TPMS sensors Not compatible with VDO TPMS sensors Work without the use of TPMS sensors Available in Silver, Anthracite, and Black Black and Anthracite valve stems come with a color-matched knurled, metal cap Silver valve stems comes with a knurled color-matched plastic cap
Show More Show Less

APEX EC-7 19x10.5" ET22 Satin Black Wheel 23.9lbs
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:201374
Part#: EC719105ET22SMBK
Ships in 5 Business Days
$ 479.00 USD
Free Shipping
$ 479.00 USD
Free Shipping
19x10.5" ET22 APEX EC-7 Wheel 23.9lbs.
Wheel Specs
Fitment:Front or Rear
Size:19x10.5"
Offset (mm):22
Weight (lbs):23.9
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less
APEX Wheels Metal Valve Stem - Black - BMW & MINI
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:593644
Part#: HW-OEM-VALVE-BK
Ships in 2 Business Days
$ 15.00 USD
Free Shipping on orders $49 and up
APEX Wheels metal valve stems come in 3 colors that compliment wheels in any finish. Made in Germany, they are guaranteed to fit OEM Huf/Beru TPMS sensors and can also be installed without them. Valve stems are sold individually Made in Germany Guaranteed to fit APEX wheels, and also work with a variety of OEM and aftermarket wheels Guaranteed to fit OEM Huf/Beru TPMS sensors Not compatible with VDO TPMS sensors Work without the use of TPMS sensors Available in Silver, Anthracite, and Black Black and Anthracite valve stems come with a color-matched knurled, metal cap Silver valve stems comes with a knurled color-matched plastic cap
Show More Show Less
APEX Wheels Metal Valve Stem - Silver - BMW & MINI
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:593646
Part#: HW-OEM-VALVE-SV
Ships in 2 Business Days
$ 17.00 USD
Free Shipping
$ 17.00 USD
Free Shipping
APEX Wheels metal valve stems come in 3 colors that compliment wheels in any finish. Made in Germany, they are guaranteed to fit OEM Huf/Beru TPMS sensors and can also be installed without them. Valve stems are sold individually Made in Germany Guaranteed to fit APEX wheels, and also work with a variety of OEM and aftermarket wheels Guaranteed to fit OEM Huf/Beru TPMS sensors Not compatible with VDO TPMS sensors Work without the use of TPMS sensors Available in Silver, Anthracite, and Black Black and Anthracite valve stems come with a color-matched knurled, metal cap Silver valve stems comes with a knurled color-matched plastic cap
Show More Show Less


APEX EC-7 19x9.5" ET22 Anthracite Wheel 22.9lbs
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:201364
Part#: EC71995ET22AN
Ships in 5 Business Days
$ 459.00 USD
$ 459.00 USD
19x10" ET25 APEX EC-7 Wheel 23.5lbs.
Wheel Specs
Fitment:Mostly Rear
Size:19x9.5"
Offset (mm):22
Weight (lbs):22.9
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less
Akrapovic - Corporate Logo
T#:394612
Part#: P-HF947
In Stock at Vendor
$ 974.99 USD
Free Shipping on orders $49 and up
The Akrapovic Sound Kit is a wireless exhaust valve control system that allows you full control over the valve system in your titanium Akrapovic exhaust. This enable you to open the exhaust valve when you want to turn as many heads as possible or keep it closed when your out for an easy Sunday drive.
Show More Show Less
APEX EC-7 19x10" ET25 Satin Black Wheel 23.5lbs
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:201371
Part#: EC71910ET25SMBK
Ships in 5 Business Days
$ 469.00 USD
Free Shipping
$ 469.00 USD
Free Shipping
19x10" ET25 APEX EC-7 Wheel 23.5lbs.
Wheel Specs
Fitment:Mostly Rear
Size:19x10"
Offset (mm):25
Weight (lbs):23.5
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX EC-7 19x9.5" ET43 Silver Wheel 23lbs
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:201357
Part#: EC71995ET43RS
Ships in 5 Business Days
$ 426.00 USD
Free Shipping
$ 426.00 USD
Free Shipping
19x9.5" ET43 APEX EC-7 Wheel 23lbs.
Wheel Specs
Fitment:Mostly Rear
Size:19x9.5"
Offset (mm):43
Weight (lbs):23
Profile:2, moderate dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

Genuine BMW M Performance - Corporate Logo
T#:210201
Part#: 32302344150
Ships in 7 Business Days
2% off MSRP $ 1,360.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,330.99 USD
Free Shipping
2% off MSRP
$ 1,360.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,330.99 USD
Free Shipping


Genuine BMW Steering Wheel - M Performance

Genuine BMW M Performance - Corporate Logo
T#:196173
Part#: 51192339222
Ships in 4 Business Days
4% off MSRP $ 1,500.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,445.99 USD
Free Shipping
4% off MSRP
$ 1,500.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,445.99 USD
Free Shipping


Genuine BMW Rear Diffuser, Carbon - "M Performance"
This item fits the following BMW Chassis:
F15,F16


Genuine BMW M Performance - Corporate Logo
T#:178475
Part#: 34217847226
Ships in 6 Business Days
4% off MSRP $ 327.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 314.99 USD
Free Shipping on orders $49 and up
4% off MSRP
$ 327.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 314.99 USD
Free Shipping on orders $49 and up


Genuine BMW Brake Carrier - Dunkelblau
This item fits the following BMW Chassis:
E70 X5M,E71 X6M,E70 X5,E71 X6,F15,F16

Genuine BMW M Performance - Corporate Logo
T#:213035
Part#: 51162361520
Ships in 6 Business Days
2% off MSRP $ 615.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 602.99 USD
Free Shipping
2% off MSRP
$ 615.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 602.99 USD
Free Shipping
Genuine Bmw - Ouside Mirror Shroud, Carbon - 51162361520

APEX EC-7 19x9.5" ET33 Silver Wheel 22.5lbs
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:201360
Part#: EC71995ET33RS
Ships in 5 Business Days
$ 459.00 USD
Free Shipping
$ 459.00 USD
Free Shipping
19x9.5" ET33 APEX EC-7 Wheel 23.5lbs.
Wheel Specs
Fitment:Front or Rear
Size:19x9.5"
Offset (mm):33
Weight (lbs):22.5
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

Autosol - Corporate Logo
T#:1970
Part#: 6501
Back Ordered
$ 9.99 USD
Free Shipping on orders $49 and up
Autosol Rubber Care Gel Stick (75ml) is the same as Gummi Pflege Rubber Maintenance Stick that is no longer available from BMW, BMW Part # 82149407015 (82 14 9 407 015) just in liquid form with a foam applicator instead of a messy gel.

Perfect for protecting and revitalizing rubber seals such as sunroof, door and engine compartment seals. This silicone-based formula keeps seals flexible and repels water, preventing rubber seals from freezing in winter. Also provides UV protection. The convenient foam pad applicator allows precise application.

Ships via UPS Ground to US/Canada only (cannot ship Air or Express).
Show More Show Less
APEX EC-7 19x9.5" ET33 Satin Black Wheel 22.5lbs
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:201359
Part#: EC71995ET33SMBK
Ships in 5 Business Days
$ 459.00 USD
Free Shipping
$ 459.00 USD
Free Shipping
19x9.5" ET33 APEX EC-7 Wheel 23.5lbs.
Wheel Specs
Fitment:Front or Rear
Size:19x9.5"
Offset (mm):33
Weight (lbs):22.5
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less
Autosol - Corporate Logo
T#:580257
Part#: AS1020
Back Ordered
$ 11.99 USD
Free Shipping on orders $49 and up
Restores color and sheen to plastic while protecting with UV inhibitors.


APEX EC-7 19x9.5" ET33 Anthracite Wheel 22.5lbs
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:201361
Part#: EC71995ET33AN
Ships in 5 Business Days
$ 459.00 USD
Free Shipping
$ 459.00 USD
Free Shipping
19x9.5" ET33 APEX EC-7 Wheel 23.5lbs.
Wheel Specs
Fitment:Front or Rear
Size:19x9.5"
Offset (mm):33
Weight (lbs):22.5
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less
Autosol - Corporate Logo
T#:580256
Part#: AS1000
Back Ordered
$ 11.99 USD
Free Shipping on orders $49 and up
Polishes and preserves metal surfaces.