BMW F85 X5 M S63 4.4L

BMW M Performance Key Case

LCI ONLY

T#:13990876

Part#: 82295A56C32

In Stock

10% off MSRP $ 93.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 84.99 USD

Add to Wish List

Qty

10% off MSRP

$ 93.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 84.99 USD

Add to Wish List

Give your key an extra bit of personality with this M performance key cover decorated in Alcantara, leather, and carbon texture! fits: IX, XM, X7 LCI, G70 7 series

90mm Black M14 BMW 5 Lug Hex Head Stud Kit - APEX

2X Entries For Our G87 M2 Sweepstakes!

T#:26171623

Part#: HW-APX-M14125-90

Ships in 2 Business Days

$ 160.00 USD

Add to Wish List

Qty

$ 160.00 USD

Add to Wish List

Upgrade your BMW race car with a stud conversion kit from [Brand Name] for enhanced strength, safety, and improved pit stop times. Even for non-race cars, stud conversions streamline wheel installation and removal, eliminating the need to align holes before threading lug bolts.

Enhanced strength and safety
Improved pit stop times
Simplified wheel installation and removal
Versatility with extended length wheel studs
Reduced wear on hub threads
Long-term durability and safety
Simplified maintenance and improved efficiency

Show More Show Less

BMS Pedal Tuner - N52, N54, N55

T#:586269

Part#: BMSPBT

In Stock

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

The BMS Pedal Tuner is a BMW Performance Chip with a pre-programmed internal chip that intercepts the stock signals from your BMW's electronic control unit (ECU) and changes them to achieve better performance by adjusting the air-fuel ratio and spark timing. Made specifically for the BMW inline six-cylinder motors. The PBX also has an adjustable throttle feature that can be combined with the Performance chip feature by selecting a setting or "map". The BMS Pedal Tuner contains both a performance chip which gives you an extra 8-10 Horsepower at the wheels and an adjustable throttle boost feature that makes the gas pedal send a boosted throttle signal in increments of 30%, 60%, and 100% over the stock BMW signal. Depending on what setting/ "map" you select you can create a perfect blend of throttle response. The BMS Pedal Tuner will make your vehicle more responsive, spirited and fun to drive. It will make your vehicle faster by increasing the horsepower and torque. It works well with other modifications like intakes and exhausts, but can also be used alone. It will remove the "dead space" when you push on the non-responsive stock BMW accelerator. It changes the way the car drives and feels. You can turn it on and off from the comfort of your driver's seat to feel the difference. The BMS Pedal Tuner is a clear choice. Features: Throttle Re-mapping for Better Response / Reaction Removes "dead area" delay in gas pedal 7 Different Maps / Settings for more enjoyable driving Can be set and turned on and off from inside the car Invisible to dealers equipment Made in USA

Show More Show Less

Spark Plug Gapper Tool BMS Billet

T#:26404907

Part#: 12MMSPG

In Stock

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

Spark Plug Gapper Tool BMS Billet is essential for accurately adjusting the gap of spark plugs. This precision tool ensures that each plug is set to the exact specifications required for optimal engine performance. Made in the USA, it features a 12mm plug thread size, making it suitable for a wide range of applications.

Precision Adjustment: Allows for accurate gap adjustments to ensure optimal spark performance and engine efficiency.
Speed and Efficiency: Streamlines the process of gapping plugs while maintaining high precision, saving time and effort.
High-Quality Construction: Crafted from billet materials for durability and reliability, ensuring long-term use.
Lifetime Replacement Program: Comes with a lifetime replacement guarantee, reflecting confidence in the tool's quality and performance.

Upgrade your spark plug maintenance with the Spark Plug Gapper Tool BMS Billet for a reliable and precise solution.

Show More Show Less

BMW / MINI Jack Pad Adapters - Blue - Set Of 4

T#:31522930

Part#: BMWJACKPADBLUE4

In Stock

$ 65.00 USD

Add to Wish List

Qty

$ 65.00 USD

Add to Wish List

CNC Billet License Plate Bracket

T#:27105150

Part#: RE.061

In Stock

$ 119.00 USD

Add to Wish List

Qty

$ 119.00 USD

Add to Wish List

You are looking at the BEST license plate bracket for your BMW, price no object! We never understood why BMW would put a cheap, plastic bracket on the back of a BMW to hold a license plate. The screws holding the bracket on would rust, the steel inserts hold the plate on would also rust, causing the hardware holding the plate on to seize or just no longer function. Our bracket fits any BMW that mounts license plates in the rear that use factory part number 51-18-8-238-061. Fits most BMWs produced AFTER 1999. If your vehicle does not use the plastic plate, it will not fit. Does not fit E46 touring (wagon). PROBLEMS with the factory bracket and hardware The screws that secure the plastic bracket are plated steel and will corrode over time. These two screw would normally not be seen since it is under the license plate, but it is holding the bracket onto the trunk. The four (4) nutserts that are pressed into the plastic frame (to hold the license plate) are also steel and will eventually seize with the bolt and just spin in the plastic frame becoming useless. The plastic frame itself is flimsy, doing a near minimal task of holding on the license plate. The hardware securing the plate to the bracket will rust, seizing to the nutsert or even spinning in place becoming completely useless. SOLUTION Create a more robust bracket that would not only be stiffer but also more corrosion resistant; CNC’d aluminum with an anodized finish. We machine a near identical plate, matching factory dimensions, from 1/2" plate of aluminum. Instead of nutserts pressed into plastic, map the correct position and machine the threads for the hardware directly into the plate. The hardware used to secure the new bracket to the trunk would be made from stainless steel (or optional corrosion-proof titanium) The hardware used to secure the license plate to the newly engineered bracket would also be stainless steel (or optional made from titanium) Kit Includes: One (1) Rogue Engineering designed and manufactured CNC'd aluminum license plate bracket Two (2) Stainless screws to secure bracket to trunk. Four (4) stainless screws to secure license plate to bracket.

Show More Show Less

BMW F30 E9X TMAP Sensors & PNP Adapters

T#:583821

Part#: 3.5 BAR TMAP

In Stock

$ 32.99 USD

Add to Wish List

Qty

$ 32.99 USD

Add to Wish List

JB4 3.5 bar plug and play TMAP adapters

JB4 Bluetooth Wireless Connect Kit - Pinned Power Wire - F-Chassis & ...

T#:598298

Part#: JB4-SPWCK-F

In Stock

$ 159.00 USD

Add to Wish List

Qty

$ 159.00 USD

Add to Wish List

The JB4 Connect Kit (Rev 3.7) allows your Bluetooth 4.0 compatible iOS and Android devices to connect wirelessly to your JB4. View critical engine data in real time, datalog, read codes, change maps, update settings, update firmware, and more, all from the palm of your hand! The REV3 mounts next to the JB4 in the engine bay eliminating the need to run a BMS DATA cable inside the cabin. It's compatible with all JB4 products. Just plug it in to the JB4 where your BMS DATA cable connects, purchase the JB4 Mobile app, and you're off and running. Please note the JB4 Mobile app is available for iPhone®, iOS®, or Android and sold separately via the Apple® or Android® app store on your phone. The wireless adapter is not compatible with the JB4 windows interface. See our other listings for the "BMS DATA cable" for laptop use.

Show More Show Less

BMW 50 Years M Valve Stem Caps

T#:13990873

Part#: 82115A75DA7

In Stock

3% off MSRP $ 35.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 33.99 USD

Add to Wish List

Qty

3% off MSRP

$ 35.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 33.99 USD

Add to Wish List

50th year M valve stem caps

Burger Motorsports 3.5 Bar TMAP Sensor & 32" Extension Harness - N54 ...

T#:28504212

Part#: BMS35TMAP-32

Back Ordered

$ 179.00 USD

Add to Wish List

Qty

$ 179.00 USD

Add to Wish List

Use these plug-and-play adapters to quickly adapt a 3.5 BAR TMAP sensor to your N54/N55 BMW, raising the boost maximum boost range from 20psi factory up to 36psi for the 3.5 bar. For most applications the 3.5 BAR adapter is suggested which requires OEM BMW sensor part number: 13627843531.

Show More Show Less

BMW 50 Years M License Plate Frame

T#:13990874

Part#: 82115A75DA6

In Stock

4% off MSRP $ 55.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 52.99 USD

Add to Wish List

Qty

4% off MSRP

$ 55.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 52.99 USD

Add to Wish List

This stylish and attractive license plate frame is the perfect addition to your BMW.

330mm MOMO MOD.78 Steering Wheel

T#:301059

Part#: TMS301059

In Stock at Vendor

$ 279.00 USD

Add to Wish List

Qty

$ 279.00 USD

Add to Wish List

This steering wheel combines the best of all worlds for both track/street use and racing requirements. It has an anticorodal aluminum core, durable leather covering, and an ergonomic feel for comfort and control.

Show More Show Less

BMW N54 N55 N63 S63 HJS V-Band Exhaust Clamp - Priced Each

T#:396285

Part#: 11657620508

In Stock

$ 20.99 USD

Add to Wish List

Qty

$ 20.99 USD

Add to Wish List

BMW N54 N55 N63 S63 HJS V-Band Exhaust Clamp - Priced Each is designed for superior performance and reliability in exhaust system maintenance and upgrades. Engineered by Turner Motorsport, this high-quality clamp ensures a secure and leak-free connection in your BMW's exhaust system.

Durable Construction: Made from premium materials to withstand high temperatures and harsh conditions, ensuring long-lasting performance.
Precision Fit: Designed to fit perfectly with BMW N54, N55, N63, and S63 engines, offering a secure and reliable seal.
Improved Exhaust Efficiency: Prevents leaks and maintains optimal exhaust flow, contributing to better engine performance and efficiency.
Easy Installation: The V-band design allows for quick and easy installation or removal, simplifying exhaust system maintenance.
Versatile Use: Ideal for both performance upgrades and routine repairs, making it a valuable addition to any BMW enthusiast's toolkit.

Show More Show Less

JB4 Bluetooth Wireless Connect Kit - Separate Power Wire - E-Chassis ...

For use with older E chassis BMW JB4 systems with the square plastic case.

T#:403194

Part#: JB4-BT

In Stock

$ 149.00

This product was last offered at the strikethrough price on
05-13-2026

$ 99.00 USD

Add to Wish List

Qty

$ 99.00 USD

Add to Wish List

The JB4 Connect Kit (Rev 3.7) allows your Bluetooth 4.0 compatible iOS and Android devices to connect wirelessly to your JB4. View critical engine data in real-time, datalog, read codes, change maps, update settings, update firmware, and more, all from the palm of your hand! The REV3 mounts next to the JB4 in the engine bay eliminating the need to run a BMS DATA cable inside the cabin. It's compatible with all JB4 products. Just plug it into the JB4 where your BMS DATA cable connects, attach the power and ground wire to the JB4 harness using the included connectors, purchase the JB4 Mobile app, and you're off and running. Please note the JB4 Mobile app is available for iPhone®, iOS, or Android® and sold separately via the Apple® or Android® app store on your phone. This adapter is not compatible with the JB4 windows interface.

Show More Show Less

BMS Billet Water/Methanol Injection Tank Cap With Safety Check Valve ...

T#:20815185

Part#: BMSWMITC

Ships in 3 Business Days

$ 59.00 USD

Add to Wish List

Qty

$ 59.00 USD

Add to Wish List

The Burger Motorsports custom billet Water/Methanol Injection (WMI) cap includes an integrated heavy-duty check valve to let much-needed air in and prevent dangerous WMI vapor/fumes and liquid from getting out! Each cap is CNC machined in the USA from a solid block of billet aluminum, engraved with the BMS logo, and anodized blue for protection. Check valve piston must be lightly lubricated if tank shows signs of vacuum. One drop of penetrating oil or motor oil in the top will keep the check valve operational. Features and Benefits Integrated heavy-duty check valve lets air in but not out Specifically designed to prevent evaporation Keeps vapors inside the tank Made from a solid block of billet aluminum Blue anodizing for corrosion protection Exaggerated grips for easy removal Integrated heavy-duty o-ring Made in the USA

Show More Show Less

1 Gallon Methanol Tank - Clear/White

T#:558165

Part#: 1G-MT-CL

In Stock

$ 30.00 USD

Add to Wish List

Qty

$ 30.00 USD

Add to Wish List

The least expensive option available from BMS, this 1 gallon tank is compact and flexible allowing for a wide range of mounting on any flat vertical surface in the trunk. The tank is clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a compression pump feed fitting Made in USA Tank dimensions: L 11" x W 4.5 x H 9"

Show More Show Less

Tire Valve For TPMS Systems

T#:641919

Part#: AUL1SENSOR

In Stock

Sale - Save 29% $ 60.96

This product was last offered at the strikethrough price on
05-15-2026

$ 43.02 USD

Add to Wish List

Qty

Sale - Save 29%

$ 60.96

This product was last offered at the strikethrough price on
05-15-2026

$ 43.02 USD

Add to Wish List

12g Lower MX-Sensor weight is significantly lighter than most sensors ensures greater security and stability for durable use

Universal BMW Jack Pad Red - Set Of 4

T#:9803960

Part#: BMWJACKPADRED4

Ships in 2 Business Days

$ 79.99 USD

Add to Wish List

Qty

$ 79.99 USD

Add to Wish List

Ensure safe and professional jacking of your BMW, 2020 Supra, or MINI with the Turner Motorsport Jack Pad Adapter. Designed to mimic the factory scissor jack, this adapter allows for secure lifting at any of the 4 factory jack points without causing damage to your vehicle. Made in the USA from solid billet aluminum, it features the Burger Motorsports logo and a honeycomb grip pattern for stability. Simple to use and compatible with most floor jacks, it ensures correct and secure lifting every time. Here are the key benefits:

Safely lifts your BMW, 2020 Supra, or MINI at factory jack points
Prevents damage to rocker panels or vehicle undercarriage
Made from solid billet aluminum for durability
Engraved Burger Motorsports logo for authenticity
Honeycomb grip pattern for stability during use

Show More Show Less

Genuine BMW M Performance Decal Set

T#:181351

Part#: 51142296551

Ships in 1-2 days

10% off MSRP $ 101.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 90.99 USD

Add to Wish List

Qty

10% off MSRP

$ 101.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 90.99 USD

Add to Wish List

These decals can give your BMW the look you have been craving, calling out the M Performance nature of your vehicle!

Genuine BMW M Performance M Performance Floormats - F85 X5 M F86 X6 M...

T#:210512

Part#: 51472353381

Ships in 1-2 days

2% off MSRP $ 203.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 198.99 USD

Add to Wish List

Qty

2% off MSRP

$ 203.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 198.99 USD

Add to Wish List

Genuine BMW Floor Mats 'Performance' Front - Lhd
This item fits the following BMW Chassis:
F15,F16

Genuine BMW M Performance Key Case

T#:217388

Part#: 82292355519

Ships in 1-2 days

4% off MSRP $ 85.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 81.99 USD

Add to Wish List

Qty

4% off MSRP

$ 85.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 81.99 USD

Add to Wish List

Genuine Bmw Key Case, M Performance - 82292355519

Billet Spark Plug Gapper Tool - 14mm - BMS

T#:583132

Part#: BMSBSPGT14MM

Ships in 7 Business Days

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

BMS Billet Spark Plug Gapper Tool - 14mm is an essential tool for achieving accurate and consistent spark plug gapping, ideal for automotive enthusiasts and professional mechanics alike. This precision tool helps maintain optimal plug performance by providing reliable, consistent gaps. Available in both 14mm and 12mm plug thread sizes, this tool is proudly made in the USA to deliver durability and precision.

Precisely gaps spark plugs for enhanced engine performance and efficiency
Speeds up the gapping process while ensuring accuracy and uniformity
Available in two sizes (14mm and 12mm) for a wider range of compatibility
Optional specialty feeler gauge included with 4 blades in thicknesses of .018, .020, .022, and .024
Made in the USA for premium quality and durability

Show More Show Less

Genuine BMW M Performance Floor Mats - Rear - F15 F85 X5

T#:210511

Part#: 51472353380

In Stock

Sale - Save 8% $ 143.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 133.19 USD

Add to Wish List

Qty

Sale - Save 8%

$ 143.99

This product was last offered at the strikethrough price on
06-25-2026

$ 133.19 USD

Add to Wish List

Upgrade your BMW's floor mats to M Performance floor mats, a subtle change that makes a big difference. This item fits the following BMW Chassis: F15, F85

BMW M Performance Stainless Steel Pedal Set - Auto/DCT - F10 F12 F13 ...

T#:174851

Part#: 35002232278

Ships in 1-2 days

Sale - Save 8% $ 169.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 157.06 USD

Add to Wish List

Qty

Sale - Save 8%

$ 169.99

This product was last offered at the strikethrough price on
06-25-2026

$ 157.06 USD

Add to Wish List

Upgrade the look of your BMWs interior with the M Performance pedals.

Genuine BMW Stainless-Steel Pedals - M Performance
This item fits the following BMW Chassis:
F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36

Show More Show Less

BMS DDP5800 Water/Methanol Injection Pump

T#:20815186

Part#: BMSDDP5800

In Stock

Starting at $ 120.00 USD

Add to Wish List

Starting at $ 120.00 USD

Add to Wish List

The Burger Motorsports DDP 5800 water methanol alcohol Injection pump is a heavy-duty pump used in all of our BMS Water Injection kits. 200 psi bypass for smooth and high pressure and 1.3 GPM open flow. Made in the USA. Available with built-in quick connect fittings for 1/4" WMI line or with open 3/8" NPT threads if you plan to use braided lines.

Show More Show Less

BMW Jack Pad Silver - Set Of 4

T#:26438196

Part#: BMWJACKPADSILR4

Ships in 1 Business Day

$ 77.99 USD

Add to Wish List

Qty

$ 77.99 USD

Add to Wish List

BMS Elite Titanium Cone Seat Lug Nuts - M14x1.25 - 20

T#:21209837

Part#: BMS-ETLN20

In Stock

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

BMS Elite titanium lug nuts are up to 50% lighter than equivalent OEM steel lugs, have a high tensile strength, and do not succumb to heat degradation, rust, or corrosion. Material: Hot forged grade 5 titanium Ti-6AL-4V Color: Black Wight: 22g each Thread: M14x1.25 Seat: 60º Cone/Conical Hex Head: 19mm Type: Open Set: 20 Lug Nuts

Show More Show Less

M Performance Gloss Black Side Vent Cover - F85/F86

T#:221966

Part#: 51712354930-931

Ships in 1-2 days

$ 358.99 USD

Add to Wish List

Qty

$ 358.99 USD

Add to Wish List

First from Turner. Get all your F85 X5M parts as soon as they become available. These direct replacement side vent covers let you eliminate the stock chrome fender vents, feature perfect fit and beautiful finish, and give a darker more aggressive look to your 2015+ F85 X5M. Set includes two matching black vents, left and right. Includes 51712354930 & 51712354931Made from impact resistant long life ABS polymer, these are Genuine BMW M Performance grills so a perfect fit is guaranteed.

This item fits the following BMWs:
2015+ F85 BMW X5 M not for cars with Night Vision

Show More Show Less

MOMO START Racing seat - ALL BMW & MINI

T#:583211

Part#: 1070BLK

Ships on Aug 17, 2026

$ 485.00 USD

Add to Wish List

Qty

$ 485.00 USD

Add to Wish List

MOMO Racing seats have bee proven to not only keep you in place, but also keep you alive. FIA 8855-1999 certification, Adjustable padding configuration, and 5 belt openings mean this seat can accommodate a wide range of Motorsport. The Start seat has a classic shape with aggressive side bolstering and a more upright seating position than the Super Cup.

Show More Show Less

MOMO Mod.08 Steering Wheel - Black - 350mm Suede

T#:343229

Part#: R1908/35S

Ships on Aug 18, 2026

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

This steering wheel combines the best of all worlds for both track/street use and racing requirements. It has an anticorodal aluminum core, durable suede covering, and an ergonomic feel for comfort and control. An ideal size for most cars and drivers, and made by renowned MOMO Italy. This is a most attractive and low cost solution. Hub adapter required.

Show More Show Less

Autel Universal Rubber TPMS Sensor - Set Of Four

T#:3529121

Part#: AUL1SENSORKT

In Stock

$ 243.99 USD

Add to Wish List

Qty

$ 243.99 USD

Add to Wish List

2 Gallon Low Profile Universal Methanol Tank

T#:20946755

Part#: 2G-ULPMT

In Stock

Starting at $ 179.00 USD

Add to Wish List

Starting at $ 179.00 USD

Add to Wish List

Integrated pump mount for a super clean install. This tank allows the pump (sold separately) to mount to the bottom of the tank making for a clean and fast installation. It’s universal and will fit a wide variety of trunk applications. The larger capacity means more time between fill ups. Offered in black for a stealth appearance and in clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Compatible with BMS DDP5800 pumps, ES4714512 or ES4714513 Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Pump mounts directly to the tank Compatible with all DDP 5800 pumps Super low profile design Available in clear for visually checking fluid levels Available in black for a stealth appearance Includes 2-way vented black plastic cap 4 mounting holes in the feet of the tank Includes a compression pump feed fitting, 2 90 degree push fittings, 9" of methanol line and pump mounting hardware. Made in the USA Tank dimensions: L 15.5" x W 8" x H 8.25"

Show More Show Less

Active Autowerke Signature Trunk Emblem

T#:590914

Part#: AASIGNATUREPLAQU

Ships in 3 Business Days

4% off MSRP $ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD

Add to Wish List

Qty

4% off MSRP

$ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD

Add to Wish List

Stand out from the crowd, and give them a hint of what you've got going on under the hood, with the official Active Autowerke Signature Emblem! The emblem can be placed anywhere on the exterior, or interior of your BMW. Hefty stainless steel construction and durable double-sided tape will help ensure that it is never lost, even at speeds over 170+ MPH...Don't ask us how we know! Represent your favorite BMW tuner for all to see today!

Show More Show Less

Autel Autolink AL329

T#:2914116

Part#: AL329

Ships in 1 Business Day

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

OBDII Code Reader

Burger Motorsport JB4-Compatible Water/Methanol Injection System - N2...

T#:558163

Part#: BMS-WMI

Ships on Aug 11, 2026

Starting at $ 226.99 USD

Add to Wish List

Starting at $ 226.99 USD

Add to Wish List

Looking to make loads of power on pump gas? Enter: water/methanol injection. Regardless if you're tuned for conventional pump gas, E85, or race fuel, use of a properly configured and integrated water/meth system will reduce temperatures, allowing you to make more power than on just conventional fuel alone. Select your engine-specific nozzles (which are standard 1/8" NPT and install in most aftermarket chargepipes), your tank to mount in the trunk, upgraded steel braided lines if you so choose, and some boost juice and you just need a management solution! Optionally, add a BMS FSB for JB4 integration!

Show More Show Less

MOMO MOD.78 Suede Steering Wheel - 330mm & 350mm

T#:338958

Part#: TMS1350

In Stock at Vendor

Starting at $ 279.00 USD

Add to Wish List

Starting at $ 279.00 USD

Add to Wish List

This steering wheel combines the best of all worlds for both track/street use and racing requirements. It has an anticorodal aluminum core, durable and slip resistant black suede covering, and thumb recesses for comfort and control.

Show More Show Less

1.25 Gallon Heavy-Duty Universal Methanol Tank

T#:20946761

Part#: 1.25G-UMT-CL

Ships on Aug 11, 2026

$ 69.00 USD

Add to Wish List

Qty

$ 69.00 USD

Add to Wish List

This tank is thicker and stronger than BMS' basic 1-gallon WMI tank. This tank features an easy fill filler nozzle, an anti-starvation reservoir with a pre-threaded bung for the included 90º compression pump feed fitting, a spill-catcher reservoir around the filler cap, a 2-way vented black plastic cap, and is translucent to allow visually checking the fluid level. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits 1.25 Gallon Tank (4.73 Liters) Anti-Starvation Reservoir Easy Fill filler Nozzle Spill-Catcher Reservoir around the filler cap Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a 90º compression pump feed fitting Tank dimensions: L 11" x W 4.5 x H 9"

Show More Show Less

APEX EC-7 19x9.5" ET22 Satin Black Wheel 22.9lbs

2X Entries For Our G87 M2 Sweepstakes!

T#:201362

Part#: EC71995ET22SMBK

Ships in 5 Business Days

$ 459.00 USD

Add to Wish List

Qty

$ 459.00 USD

Add to Wish List

19x10" ET25 APEX EC-7 Wheel 23.5lbs.

Wheel Specs
Fitment:	Mostly Rear
Size:	19x9.5"
Offset (mm):	22
Weight (lbs):	22.9
Profile:	3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX EC-7 19x10" ET25 Anthracite Wheel 23.5lbs

2X Entries For Our G87 M2 Sweepstakes!

T#:201373

Part#: EC71910ET25AN

Ships in 5 Business Days

$ 469.00 USD

Add to Wish List

Qty

$ 469.00 USD

Add to Wish List

19x10" ET25 APEX EC-7 Wheel 23.5lbs.

Wheel Specs
Fitment:	Mostly Rear
Size:	19x10"
Offset (mm):	25
Weight (lbs):	23.5
Profile:	3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

AutoLink AL529HD

T#:2914129

Part#: AL529HD

Ships in 6 Business Days

$ 264.99 USD

Add to Wish List

Qty

$ 264.99 USD

Add to Wish List

Autel’s latest member of its code reader family of tools, the AL529HD can not only diagnose OBDII/EOBD-compatible vehicles but also heavy duty vehicles utilizing SAE-J1939 and SAE-J1708 protocols.

M Performance Gloss Black Kidney Grilles - F85 X5M S63

T#:383960

Part#: 51712354497KT

Ships in 1-2 days

$ 507.99 USD

Add to Wish List

Qty

$ 507.99 USD

Add to Wish List

Get all your F85 X5M parts as soon as they become available. These direct replacement center grills let you eliminate the stock chrome kidney/center grills, feature perfect fit and beautiful finish, and give a darker more aggressive look to your 2015+ F85 X5M. Set includes two matching black grills, left and right. Includes 51712354498 & 51712354497 Made from impact-resistant long life ABS polymer, these are Genuine BMW M Performance grills so a perfect fit is guaranteed.

Show More Show Less

Genuine BMW M Performance Drive Analyser - IOS & Android

T#:544966

Part#: 61432450841

Ships in 1-2 days

3% off MSRP $ 316.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 304.99 USD

Add to Wish List

Qty

3% off MSRP

$ 316.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 304.99 USD

Add to Wish List

This Genuine BMW M Performance Drive Analyser allows you to transmit vehicle performance data to your smartphone.

Genuine BMW M Performance M Performance Side Grilles - F85 X5 M S63 ...

T#:383961

Part#: 51712354930KT

Ships in 1-2 days

$ 358.99 USD

Add to Wish List

Qty

$ 358.99 USD

Add to Wish List

Genuine BMW M Performance Gloss Black Grille - Right - F85 F86 ...

T#:210589

Part#: 51712354498

Ships in 1-2 days

4% off MSRP $ 264.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 253.99 USD

Add to Wish List

Qty

4% off MSRP

$ 264.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 253.99 USD

Add to Wish List

Genuine BMW Trim Grill, High-Gloss Black

Genuine BMW M Performance M Performance Gloss Black Grille - left - F...

T#:210588

Part#: 51712354497

Ships in 1-2 days

4% off MSRP $ 264.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 253.99 USD

Add to Wish List

Qty

4% off MSRP

$ 264.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 253.99 USD

Add to Wish List

Genuine BMW Trim Grill, High-Gloss Black

M Performance Carbon Fiber Mirror Covers - F85 X5M, F86 X6M

T#:221967

Part#: 51162361520-521

Ships in 6 Business Days

$ 1,194.99 USD

Add to Wish List

Qty

$ 1,194.99 USD

Add to Wish List

These Genuine BMW M Performance Carbon Fiber Mirror Covers are designed for the BMW F85 X5M and F86 X6M This kit includes both the left and right side mirrors. Part numbers 51162361520 & 51162361521

This item fits the following BMWs:
2015+ F85 BMW X5 M
2015+ F86 BMW X6 M

Show More Show Less

MOMO Mod.07 Steering Wheel

T#:339964

Part#: TMS21537

Ships on Aug 27, 2026

Starting at $ 249.00 USD

Add to Wish List

Starting at $ 249.00 USD

Add to Wish List

MOMO Mod 07 steering wheel is inspired by classic rally cars. Featuring a deep 70mm dish layout to put the wheel rim closer to the driver. Having the wheel closer to the driver means better leverage for quick steering corrections The Mod 07 has a standard 30mm round rim in either leather or suede.

Show More Show Less

MOMO Mod.88 Steering Wheel - Black - 350mm

T#:1863

Part#: TMS1863

Special Order: No Guaranteed ETA

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

MOMO Mod.88 Steering Wheel for track/competition use. An evolution to the hugely popular Mod 78 wheel. This wheel features a flat bottom for more leg clearance and better grip. It has a slightly oblong 350mm diameter rim with black suede covering.

Show More Show Less

MOMO Tuner Steering Wheel - Black Spoke 320mm

T#:388375

Part#: TUN32BK0B

Special Order: No Guaranteed ETA

$ 239.00 USD

Add to Wish List

Qty

$ 239.00 USD

Add to Wish List

This steering wheel combines the best of all worlds for both track/street use and racing requirements. It has an anticorodal aluminum core, durable leather covering, and an ergonomic feel for comfort and control. An ideal size for most cars and drivers, and made by renowned MOMO Italy. This is a most attractive and low cost solution. Hub adapter required.

Show More Show Less

MOMO Prototipo Steering Wheel - Silver - 350mm

T#:388372

Part#: PRO35BK0S

Special Order: No Guaranteed ETA

$ 269.00 USD

Add to Wish List

Qty

$ 269.00 USD

Add to Wish List

This steering wheel combines the best of all worlds for both track/street use and racing requirements. It has an anticorodal aluminum core, durable leather covering, and an ergonomic feel for comfort and control.

Show More Show Less

Project Cars

SELECT YOUR BMW

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results