Schwaben BMW Tools & Specialty Equipment for BMW F86 X6 M S63 4.4L

Many BMWs, especially older models, feature pinch welds where the floor pan meets the rocker. These run from wheel-well-to-wheel-well and are an especially appealing jacking location with one shortfall - jacking on an unprotected pinch weld will frequently cause an unsightly bent and damaged weld. This damage is a quick to rust spot, being located on the lowest point of the vehicle and no longer being covered by protective ecoat, paint, or undercoat.

This Schwaben Pinch Weld Protector is designed to fit between any floor jack cradle and bottom of vehicle. It features a specially designed slot to straddle pinch welds, keeping jack from crushing or bending the pinch weld. The bottom side of protector is designed to fit any jack as well as the Schwaben (T#363164) aluminum jack stands. 

Extruded and designed in USA. Pad is 3" wide & 1" tall.

This large socket is the perfect tool for axle nuts when servicing the axle shafts or wheel bearings.

Features:

• ½-inch drive 30mm 12-point socket
• Specially hardened to take the added abuse from a impact gun
• Coated for added protection and so you can tell it apart from non impact rated sockets
• 75mm depth  to accommodate many applications and different length shafts
• Made of durable chrome moly steel

Having trouble prying off your wiper arm? Prevent damaging your vehicles paint or the arm itself with this puller tool.

With ease in mind, this has many benefits over using a traditional pry bar. The handle is a sturdy plastic knob that allows you to get a solid grip when applying pressure. Low profile design allows you to get into tight areas with potentially damaging your paint or needing to pry against a weak surface. The rounded point allows you remove the wiper arm puller with little to no marks left behind on the wiper's shaft, linkage, or any other surfaces.
 

Features:

•  Will not damage wiper arm or hood cowling during removal
•  Simply place puller feet under wiper arm and tighten forcing screw against wiper shaft
• Easy adjustment with molded handle

Whether you are building a high-performance engine or simply performing a routine rebuild, getting your piston ring end gaps and installation right is critical for optimal engine performance, compression, and longevity. Designed to meet strict standards, this comprehensive toolset provides everything you need to file, measure, and install piston rings safely without causing damage.

KIT CONTENTS

Schwaben Piston Ring Filer

Easily modify piston rings for OEM engine rebuilds and boosted applications Cuts quickly and smoothly, allowing you to easily avoid filing in excess Durable, bench-mountable construction with a long-lasting diamond abrasive wheel Piston Ring Installation Tool

Ensures even tension distribution during expansion Accommodates all pistons ranging from 60 mm to 175 mm in diameter Features an easy thumb-release locking mechanism for quick and secure operation Feeler Gauge Set

16 blades - 0.002-0.025 inch thickness measurements

The Schwaben 1/2" Drive Ratchet is a professional-grade tool built for durability and precision. Constructed from high-strength steel with a satin chrome finish, it is designed to resist corrosion and wipe clean easily after use.

The core of this tool is a 72-tooth gear mechanism that requires only 5° of movement to engage the next tooth. This fine-tooth design is critical for working in modern engine bays or tight chassis areas where your range of motion is severely limited.

TECHNICAL SPECIFICATIONS

Drive Size: 1/2" Length: 248mm (9.75") Gear Ratio: 72-tooth mechanism Arc Swing: 5° Material: High-strength alloy steel Finish: Satin Chrome FEATURES

Tight-Access Efficiency - a 5° arc swing allows for consistent bolt movement in cramped quarters where standard ratchets struggle Quick-Release Button - a positive-lock push-button mechanism holds sockets securely during high-torque applications and allows for immediate one-handed removal. Reliable Grip - satin finish provides a secure grip even when hands are oily, offering better control than high-polish alternatives.

Long Flex Head Ratchet 1/2" Drive offers exceptional performance and durability for automotive and mechanical tasks. Designed with a 72-tooth gear mechanism, this ratchet is perfect for tight spaces where precision is crucial.

• Compact Gear Mechanism: The 72T gear system allows for only 5 degrees of handle movement between gears, making it ideal for working in confined areas.
• Versatile Flex Head: Features 9 detent positions within a 180-degree swing for greater flexibility and accessibility.
• Secure Socket Holding: Push button release ensures the socket remains firmly in place until intentionally released, preventing accidental drops.
• Extended Reach: With a length of 310mm (12.2"), this ratchet provides additional leverage for easier operation.
• Durable Finish: The fine satin finish enhances durability and simplifies cleaning.

This Long Flex Head Ratchet 1/2" Drive is backed by a limited lifetime warranty, ensuring long-term reliability and performance.

Upgrade Your Toolkit with the M18 Triple Square Driver

Enhance your toolkit with the rugged ½-inch drive M18 triple square driver, a crucial tool for handling challenging fasteners in various Euro-car applications. This driver is specifically engineered to work seamlessly with a long-handled ratchet or breaker bar, making the removal of stubborn fasteners effortless.

Crafted from durable forged steel and featuring etched size indicators, this professional-grade driver guarantees extended and trouble-free use. Its sturdy construction ensures reliability, making it an ideal choice for automotive tasks.

Key Benefits:

• Designed for tough fastener removal in Euro-car applications
• Compatible with long-handled ratchets or breaker bars
• Durable forged steel construction for longevity
• Etched size indicators for easy identification

Upgrade your toolkit with this professional-grade M18 triple square driver, perfect for efficient fastener removal in BMW and other Euro-car models.

Makes those hard to reach hose clamps much easier to loosen up.

Features:

• 6mm driver
• 6"  flex shaft
• Overall length of 10-1/2"
• No-slip grip resistant to wet or oil coated hands

Schwaben has a solution to those hard to reach hose clamps with 8mm hex nuts. This 8mm driver features an overall length of 10-1/2" and a flex shaft length of 6". The ergonomic handle features a non-slip grip for when your hands are oily or wet.

8mm/ 5/16" are commonly found on aftermarket hose clamps. 

 A complete set offered to ensure that the proper lifting techniques are at use. It's never wise to work under a vehicle supported by only a floor jack, with this complete kit you get a complete matching set to get the job done safe and fast.

• Special low profile thick frame side plates and reinforced lift arm for added strength and use.
• Wide track front wheels help provide chassis torsion control and durability.
• Angular positioned pump pistons provide maximum effective pump stroke even when jack is completely under the vehicle.
• Ball bearing mounted rear swivel caster wheels for easy maneuverability.
• Side mounted handles for carrying and easy positioning.
• Overload and bypass safety valve prevents jack overload and over extension.
• Two piece quick release padded handle for storage or transport.
• Dual piston's for 5 pump full extension

Details:

• Jack Capacity 2 Ton
• Max Lift Height 20"
• Low Height 3.25"
• Chassis Length 26.5"
• Overall Width 13"
• Saddle Diameter 4.5"
• Handle Lenght 50"
• Shipping Weight 50 lbs

Schwaben 12" wheel Stands:

These stands are made from special EPS foam with an anti-skid coating.

Won't scratch or mark your floors!

Lightweight at only 5 lbs each, makes these stands easy to carry and maneuver.

Works on virtually any surface, including sand!

Will not scoot, slip or slide, no matter the surface.

Specs:

12" tall,15.75" long,12" wide.

Works on wheel diameters from 25 to 30 inches.