Wheel Tools and Storage for BMW F86 X6 M S63 4.4L

Proper torque is very important when it comes to working on engines. The importance comes from proper sealing and to keep from damaging threads.

Features:

• Reversible ½-inch drive click-to-stop
• Torque range of 10 to 150 ft-lb
• Accurate to within +/-4%
• 18 inches in length with a convenient carry case

The Schwaben aluminum wheel hanger makes it easy to remove and install wheels. Just thread the hanger stud into a wheel bolt hole and hang the wheel safely while you rotate tires or remove them for service or vehicle repair. (It's also great for keeping wheel bolt holes aligned on cars with spacers.)

Features:

• Longer & Lighter
• Made of 6061-T6 aluminum
• Anodized for hardness and good looks
• Knurled, non-slip handle has a drilled hole so you can hang it on a pegboard hook in your garage

This complete set of extra deep sockets work great on cars equipped with extended studs. They also work as a long wheel nut socket for those deeply recessed nuts in wheels.

Features:

• 17mm, 19mm and 21mm socket in a sturdy blow molded case
• All sockets are 1/2" drive and a full 5-15/16 ( 150MM ) long
• Sockets are designed with inner bore to accept a 5" long stud

Handsome sockets are shop tough, plated to resist corrosion, and color-coded for fast identification. Set takes up less room in your tool box than conventional torque sticks, and comes in a handy blow-molded case for portability and easy organization.

Torque-limiting socket set prevents over-tightening of wheel bolts and lug nuts. Attach them to your ½-inch breaker bar or impact gun and tighten the wheel bolts or lugs until the socket stops tightening at 74 ft-lb (100 Nm). Then final-tighten the wheel fasteners to the recommended specification using a torque wrench.

Features:

• 17, 19, and 21 mm six-point impact sockets to fit most metric wheel bolt heads and lug nuts.
• Combine these with our Protecta Sockets and the Schwaben ½-inch torque wrench for a complete wheel fastener solution.

This tire stack by Schwaben is the solution to keeping your tires and wheels clean while in storage.

Features:

Durable 150D coated material rated for outdoor use. The cover is large, at 32" wide by 46" tall. Fitted with a long 29" zipper up the side for easy installation and removal. An adjustable nylon draw string allows for a good, snug fit. Includes a handy storage pouch if not in use. WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Installed extended wheel studs and would love to be able to change wheel spacers as needed? But wait, if you have a flat tire or want to change it up at the track. But now your lug wrench is not deep enough to reach the nuts.

Features:

• This specially made socket features 17mm male hex on one end and 17mm socket on the other
• Works to extend reach between wrench and lug nut
• Keep inside your glove box so it is ready for any tire change on the road or on the track

NOTE: Not for use with impact.