BMW F87 M2 N55 3.0L

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:

Liqui Moly Ceratec Oil Additive
10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!
Liqui-Moly - Corporate Logo
T#:379270
Part#: 3721
In Stock
Sale - Save 5% $ 27.99
$ 26.59 USD
Free Shipping on orders $49 and up
Sale - Save 5% $ 27.99
$ 26.59 USD
Free Shipping on orders $49 and up
Using a combination of ceramic compounds, this oil additive reduces friction and wear by forming a protective film that cuts down on direct metal to metal contact. This both extends the engines service life and reduces fuel consumption in both gasoline and diesel engines. Specially formulated to adhere to the internal engine's metal surfaces, which makes this great for vehicles with high pressure, cam-driven fuel pumps and engines that make excessive noise on start up.
Show More Show Less
Proline Engine Flush and Cera Tec Oil Treatment - Oil Change Additive...
10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!
Liqui-Moly - Corporate Logo
T#:578656
Part#: CERATECFLUSHKT
In Stock
Sale - Save 5% $ 40.99
$ 38.93 USD
Free Shipping on orders $49 and up
Sale - Save 5% $ 40.99
$ 38.93 USD
Free Shipping on orders $49 and up
**Not to be used with Liqui Moly Molygen Engine Oil - Molygen already includes friction modifiers** Step 1 - Engine Flush - Add to engine oil before engine oil change. Let engine run on idle speed for 10 minutes. Drain oil, change oil filter and re-fill with fresh high quality oil. Pro-Line Engine Flush is a development product based on highly effective state-of-the-art additive technology. These highly effective detergent and dispersant additives, in association with the carrier fluid, have been tested in the laboratory and in practical field trials for their ability to dissolve sludge and lacquer formers. All types of oil-soluble and oil-insoluble residues are brought into suspension and removed during the next oil change. An engine which has been cleaned of deposits and contamination and which is then filled with fresh oil not contaminated with old impurities can develop its full performance characteristics. Properties: Gentle and rapid cleaning Neutral to seals and other materials installed in the engine Compatible with catalytic converters Highly economical No additional environmental pollution Simple to use Contents sufficient for 5 liter engine oil capacity Fully compatible with all commercially available engine oils. Benefits: Removes deposits & residues Dissolves sludge & lacquer and isolates solid particles & liquid contaminants Improves the combustion process and restores full engine performance Prevents corrosion of unprotected metal surfaces Recovers oil lubricating properties Suitable for all gasoline and diesel engines. Step 2 - Cera Tec - Add in with your New Engine Oil Cera Tec is a high quality ceramic wear protection product which is safe for use in all engine oils. It reduces friction and wear due to ceramic compounds that withstand extremely high chemical and thermal loads. Cera Tec reduces direct metal-to-metal contact, thus increasing the engine service life. The low-friction effect reduces fuel consumption in gasoline and diesel engines. The chemicals in this specially-formulated product adhere to metal surfaces to reduce internal wear and friction, giving you peace-of-mind and saving you costly repairs in the future. Treats up to 5 liters of engine oil and provides up to 30,000 miles of protection under normal driving conditions. *Note: Not suitable for use with wet clutch applications or limited slip differentials. Great for use in vehicles with high-pressure, cam-driven fuel pumps or engines making noise upon start-up.
Show More Show Less
Liqui Moly Fully Synthetic Limited Slip Differential Fluid 75W140 - 1...
10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!
Liqui-Moly - Corporate Logo
T#:391319
Part#: LM20042
In Stock
Sale - Save 10% $ 46.99
$ 42.29 USD
Free Shipping on orders $49 and up
Sale - Save 10% $ 46.99
$ 42.29 USD
Free Shipping on orders $49 and up

Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication! Select your vehicle to make sure you are viewing the best Liqui Moly options for your application. 
Interval oil changes are often recommended for differentials to ensure long-term reliability and maximum wear prevention. Fresh oil will prevent excess wear and gear damage, maintaining smoother operation.

Check your owner's manual to determine when it is best to flush your differential and what type and weight fluid to use when re-filling your system. 

This 75w140 weight oil's multi-viscosity are perfect for ensuring protection in all climates and its synthetic composition allows for smoother operation even under the most demanding conditions.

APPROVALS:

API GL5
LIQUI MOLY RECOMMENDS THIS PRODUCT FOR VEHICLES THAT NEEDS TO COMPLY THE FOLLOWING SPECIFICATIONS:

BMW Hinterachsgetriebeöl
Ford WSL-M2C 192A
Scania STO 1:0
VME
ZF TE-ML 05D
ZF TE-ML 12D
ZF TE-ML 16G
ZF TE-ML 21D
Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

Show More Show Less

Liqui-Moly Oil Change Additive Package - Proline Engine Flush and MoS...
10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!
Liqui-Moly - Corporate Logo
T#:578655
Part#: MOS2FLUSHKT
In Stock
Sale - Save 5% $ 21.99
$ 20.88 USD
Free Shipping on orders $49 and up
Sale - Save 5% $ 21.99
$ 20.88 USD
Free Shipping on orders $49 and up
This two-step kit features a flushing additive to be run through before the oil change and MoS2 for after new oil has been added.

Special Tec B FE 0W-30 Motor Oil - 5 L
10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!
Liqui-Moly - Corporate Logo
T#:32980578
Part#: 22261
In Stock
Sale - Save 10% $ 58.98
$ 53.08 USD
Free Shipping on orders $49 and up
Sale - Save 10% $ 58.98
$ 53.08 USD
Free Shipping on orders $49 and up
HJS - Corporate Logo
T#:396285
Part#: 11657620508
In Stock
$ 21.49 USD
Free Shipping on orders $49 and up

BMW N54 N55 N63 S63 HJS V-Band Exhaust Clamp - Priced Each is designed for superior performance and reliability in exhaust system maintenance and upgrades. Engineered by Turner Motorsport, this high-quality clamp ensures a secure and leak-free connection in your BMW's exhaust system.

  • Durable Construction: Made from premium materials to withstand high temperatures and harsh conditions, ensuring long-lasting performance.
  • Precision Fit: Designed to fit perfectly with BMW N54, N55, N63, and S63 engines, offering a secure and reliable seal.
  • Improved Exhaust Efficiency: Prevents leaks and maintains optimal exhaust flow, contributing to better engine performance and efficiency.
  • Easy Installation: The V-band design allows for quick and easy installation or removal, simplifying exhaust system maintenance.
  • Versatile Use: Ideal for both performance upgrades and routine repairs, making it a valuable addition to any BMW enthusiast's toolkit.
Show More Show Less

APEX Wheels - Corporate Logo
T#:26171623
Part#: HW-APX-M14125-90
Ships in 2 Business Days
$ 160.00 USD
Free Shipping
$ 160.00 USD
Free Shipping

Upgrade your BMW race car with a stud conversion kit from [Brand Name] for enhanced strength, safety, and improved pit stop times. Even for non-race cars, stud conversions streamline wheel installation and removal, eliminating the need to align holes before threading lug bolts.

  • Enhanced strength and safety
  • Improved pit stop times
  • Simplified wheel installation and removal
  • Versatility with extended length wheel studs
  • Reduced wear on hub threads
  • Long-term durability and safety
  • Simplified maintenance and improved efficiency
Show More Show Less
10w-60 Engine Oil Liqui Moly Race Tech GT1 - Case Of 12
10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!
Liqui-Moly - Corporate Logo
T#:588076
Part#: 2068/12KT
In Stock
Sale - Save 5% $ 143.99
$ 136.69 USD
Free Shipping
Sale - Save 5% $ 143.99
$ 136.69 USD
Free Shipping

10w-60 Engine Oil Liqui Moly Race Tech GT1 is specially formulated to meet the rigorous demands of high-performance BMW engines. This advanced engine oil provides exceptional lubrication, ensuring optimal engine performance even under the most challenging conditions. Designed for both street and track use, it offers superior wear protection and thermal stability, making it the perfect choice for enthusiasts who demand the best for their vehicles.

Benefits:

  • High Viscosity Stability: Maintains consistent performance across a wide temperature range, ideal for both hot and cold conditions.
  • Exceptional Engine Protection: Reduces wear and tear, extending the life of engine components, and ensuring reliability during high-performance driving.
  • Enhanced Performance: Improves engine responsiveness and efficiency, providing noticeable power gains and better throttle response.
  • Compatible with BMW Engines: Specifically designed to meet the lubrication needs of BMW’s high-performance engines, including those in motorsport applications.
  • Advanced Additive Technology: Includes high-quality additives that prevent sludge formation and keep the engine clean for optimal performance.

Choose 10w-60 Engine Oil Liqui Moly Race Tech GT1 for your BMW to experience superior performance and protection in every drive.

Show More Show Less

Active Autowerke - Corporate Logo
T#:4070463
Part#: F-BRACE
In Stock
$ 98.00 USD
Free Shipping
$ 98.00 USD
Free Shipping

BMW F8X M2 M3 M4 Chassis Bracing

The BMW F8X M2 M3 M4 Chassis Bracing is designed to enhance the rigidity and stability of the chassis, providing improved handling and performance for your BMW. Turner Motorsport offers this high-quality brace to support better driving dynamics and reduced flex during aggressive driving.

Benefits:

  • Enhanced Rigidity: Significantly increases chassis stiffness, leading to improved handling and reduced body roll.
  • Improved Stability: Minimizes chassis flex for more precise steering responses and better overall control.
  • High-Quality Construction: Made from durable materials to ensure long-lasting performance and reliability.
  • Easy Installation: Designed for straightforward installation with minimal modifications required.
  • Optimized Performance: Perfect for both street and track use, enhancing the driving experience and vehicle performance.
Show More Show Less

Liqui-Moly Brake Anti-Squeal Paste - 250g
10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!
Liqui-Moly - Corporate Logo
T#:599297
Part#: 22092
Ships Jul 22, 2025
Sale - Save 11% $ 36.99
$ 33.00 USD
Free Shipping on orders $49 and up
Sale - Save 11% $ 36.99
$ 33.00 USD
Free Shipping on orders $49 and up
Extremely adhesive and high-temperature resistant specialty for lubricating and separating modern brake systems of all types of motor vehicles. It is made of synthetic materials, resists road salt and splash water, and prevents and eliminates squeaking noises from brakes. With excellent corrosion protection and particularly suited for the use with aluminum and magnesium materials as well as on vehicles with ABS / ESP systems. Properties good corrosion protection easy to use eliminates squeaks resistant to road salt and splash water extremely low friction outstanding thermal stability extremely adherent ideally suited as a separating paste Brake Anti-Squeal Paste has been specially developed for the assembly, repair, and maintenance of brake systems. Used for basic lubrication and as a preventive measure against brake squeals. However, it is also universally suitable for numerous applications apart from brake systems. **WARNING: Cancer- www.P65Warnings.ca.gov
Show More Show Less
Leichtlauf High Tech Engine Oil (5w-40) - Case Of 12
10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!
Liqui-Moly - Corporate Logo
T#:588077
Part#: 2331/12KT
In Stock
Sale - Save 5% $ 126.00
$ 119.70 USD
Free Shipping
Sale - Save 5% $ 126.00
$ 119.70 USD
Free Shipping
Active Autowerke - Corporate Logo
T#:599319
Part#: 11-040-C
In Stock
$ 1,424.99 USD
Free Shipping
$ 1,424.99 USD
Free Shipping
BMW introduced a new valvetronic, single turbo version of its direct-injection engine for the F-Chassis models beginning in 2012. The Active Autowerke N55 downpipe for the M235i, 335i, 435i and M2 helps unleash some of the potential that is restricted by the OEM downpipe. Turbochargers are powered by spent exhaust gases created during the combustion process. The quicker these gases are evacuated, the better. Unfortunately, the factory down pipe in the N55 is quite restrictive, which results in slower exhaust gases and slower turbo spool. The Active Autowerke F-Chassis N55 Signature down pipe utilizes 3.5” diameter stainless steel piping in order to provide more power, quicker spool, and extreme durability. This variant includes a 4.5" high flow GESI catalytic converter that will NOT produce a CEL! The GESi® G-Sport Ultra High Output Catalytic Converter features full 304 stainless steel construction, including the substrate. GESi® UHO-Series Catalytic Converters are EPA certified in 49 states and fully OBD2 compliant. GESi® proprietary precious metal loading technology ensures greatly reduced emissions, eliminating most "Check Engine Lights". These high flow catalytic converters outperform stock converters and provide a reliable solution to the most common catalytic converter problems. The GESi® UHO-Series Catalytic Converters are rated for engines putting out between 500 and 850 horsepower while maintaining a high flow capacity. The reduced back-pressure from this high flow catalytic converter will allow you to maximize your engines horsepower without the harmful emissions. Say goodbye to Check Engine Lights and failed emissions tests! Please Note: These catalytic converters are not legal for use on vehicles registered in the state of California as a result of California Vehicle Code Section 27156 and 38391.
Show More Show Less


5W-40 Molygen New Generation Engine Oil - Case Of 12
10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!
Liqui-Moly - Corporate Logo
T#:588071
Part#: 20230/12KT
In Stock
Sale - Save 5% $ 119.99
$ 113.89 USD
Free Shipping
Sale - Save 5% $ 119.99
$ 113.89 USD
Free Shipping
5W-40 Molygen New Generation Engine Oil - Case Of 12 is engineered to provide superior protection and performance for modern engines. This advanced engine oil is formulated with high-quality synthetic base oils and innovative additives, ensuring optimal lubrication and enhanced efficiency. Ideal for both gasoline and diesel engines, this oil delivers excellent wear protection, thermal stability, and cleanliness. By choosing Molygen New Generation Engine Oil, vehicle owners can experience smoother engine operation and improved fuel efficiency. This case of 12 bottles ensures that you have an ample supply for regular maintenance, keeping your engine in top condition and prolonging its lifespan.

Key Benefits:

  • Superior Protection: Formulated to minimize engine wear and extend engine life.
  • Enhanced Efficiency: Provides excellent fuel economy and reduces emissions.
  • Thermal Stability: Maintains viscosity and performance in extreme temperatures.
  • Clean Engine: Keeps engine components clean by preventing sludge and deposit buildup.
  • Convenient Packaging: Case of 12 ensures you always have the oil you need for maintenance.
Show More Show Less
Active Autowerke - Corporate Logo
T#:22295072
Part#: 11-074G
Ships in 3 Business Days
$ 84.99 USD
Free Shipping
$ 84.99 USD
Free Shipping

BMW F8X G8X Exhaust Valve Cable Extender from Turner Motorsport is essential for upgrading your BMW's exhaust system, particularly if you're experiencing issues with stock cable lengths. This extender ensures a proper connection for rear exhaust systems that may have shorter cables.

  • Model Compatibility: Designed for BMW models F80, F82, F87, G80, G82, G87, and F97.
  • Proper Fit: Ensures a correct fit for rear exhaust systems, preventing any issues with cable length.
  • Available Lengths: Offered in 12-inch and 24-inch options to suit different needs.
  • Custom Lengths: Custom lengths available upon request for a tailored solution.
  • High-Quality Construction: Built to maintain the reliability and performance of your BMW’s exhaust system.
Show More Show Less
Special Tec LL 5W-30 Motor Oil - Case Of 12
10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!
Liqui-Moly - Corporate Logo
T#:588073
Part#: 2248/12KT
In Stock
Sale - Save 5% $ 117.99
$ 111.61 USD
Free Shipping
Sale - Save 5% $ 117.99
$ 111.61 USD
Free Shipping

Liqui-Moly Air-Conditioner System Cleaner Gun
10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!
Liqui-Moly - Corporate Logo
T#:637244
Part#: 4090
In Stock
Sale - Save 5% $ 125.99
$ 119.69 USD
Free Shipping
Sale - Save 5% $ 125.99
$ 119.69 USD
Free Shipping
Special cleaning gun for optimum application of the specially developed Air Conditioning System Cleaning Fluid, Part. No. 4091/4092/9001/20915/20841. Enables optimum atomization of the cleaning fluid and thanks to the spherical spray jet ensures 99.9 % removal of mold and bacteria such as legionellae from the air conditioning system. The very flexible spray probe allows even the most remote corners to be reached. Developed specially for cleaning air conditioning systems in passenger cars, commercial vehicles, and buses as well as in homes.
Show More Show Less

Liqui Moly DCT Transmission Oil - 5 Liter
For vehicles with DCT transmission only
10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!
Liqui-Moly - Corporate Logo
T#:599343
Part#: 20116
In Stock
Sale - Save 5% $ 75.99
$ 72.19 USD
Free Shipping
Sale - Save 5% $ 75.99
$ 72.19 USD
Free Shipping
Developed specifically for newer dual clutch transmission designs, this 8100 DCT transmission oil is perfectly suited for transmissions with a shared oil supply for clutch, synchronization, gear set, and hydraulic control. Using a combination of HC-Synthesis oils and highly shear resistant viscosity index improvers, modern wear protection additives, and stable friction agents, transmission internals are enabled to operate smoothly and efficiently with excellent coupling performance.
Show More Show Less
Longtime High Tech Engine Oil (5w-30) - Case Of 12
10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!
Liqui-Moly - Corporate Logo
T#:588075
Part#: 2038/12KT
In Stock
$ 119.99 USD
Free Shipping
$ 119.99 USD
Free Shipping

APEX Wheels - Corporate Logo
T#:11170593
Part#: EC7RS189ET30AN
In Stock
$ 689.00 USD
Free Shipping
$ 689.00 USD
Free Shipping
Sunex - Corporate Logo
T#:391150
Part#: SUU884506
In Stock
$ 20.99 USD
Free Shipping on orders $49 and up
3/8" drive socket with 5/8" opening for most spark plugs

Pro-Line Automatic Transmission Cleaner - 1 Liter
10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!
Liqui-Moly - Corporate Logo
T#:25839044
Part#: 20224
In Stock
Sale - Save 10% $ 29.99
$ 26.99 USD
Free Shipping on orders $49 and up
Sale - Save 10% $ 29.99
$ 26.99 USD
Free Shipping on orders $49 and up

Elevate your automatic transmission's performance and lifespan with Liqui Moly's advanced cleaning fluid:

  • Dissolves problematic deposits and residues for optimized gear shift performance.
  • Extends transmission service life by effectively cleaning sludge and lacquer formers.
  • Gentle cleaning action preserves rubber and plastic seals.
  • Optimizes economical use, ensuring cost-effective maintenance.
  • Effortlessly tackles stubborn dirt for a thorough clean.
  • Suitable for all automatic transmissions, providing universal compatibility.
  • Convenient application with Liqui Moly Gear Tronic for enhanced effectiveness.
Show More Show Less

APEX Wheels - Corporate Logo
T#:390690
Part#: ARC8189ET30SMBK
Ships in 10 Business Days
$ 379.00 USD
Free Shipping
$ 379.00 USD
Free Shipping
APEX Wheels - Corporate Logo
T#:19395576
Part#: ARC818930SQ
Ships in 2 Business Days
Starting at $ 1,476.00 USD
Free Shipping
Starting at $ 1,476.00 USD
Free Shipping
Apex ARC8 18x9" ET30 Wheel Set Apex 8.5" wheel set for the front and rear of your BMW. These are a bit wider than stock to put more rubber to the road. This helps to reduce understeer on cars with staggered wheel sets and gives you the option to rotate tires. If you're tracking your BMW you should absolutely have a square wheel set (the same size front and rear). Adding a wider wheel will get you more rubber where it counts - reducing understeer and improving initial turn-in. APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.
Show More Show Less
APEX Wheels - Corporate Logo
T#:20287705
Part#: EC7199H10D
Ships in 5 Business Days
Starting at $ 1,796.00 USD
Free Shipping
Starting at $ 1,796.00 USD
Free Shipping
APEX wheels are stronger, lighter wheels than typical cast wheels thanks to their Flow-formed semi-forging process. These wheels are on average 10lbs lighter or more! This reduces unsprung weight, allow for the best performance possible. The spokes and barrel are designed to allow as much room as possible for brake systems, while retaining a classic motorsports theme that matches perfectly with the aggressive BMW style. Thanks to these qualities, these wheels will keep your looks and performing at your best with plenty of confidence! Shed weight and add style with APEX wheels! 19x9" ET30/19x10" ET25.
Show More Show Less


APEX Wheels - Corporate Logo
T#:19428670
Part#: VS5RS181025SQ
Back Ordered
Starting at $ 2,636.00 USD
Free Shipping
Starting at $ 2,636.00 USD
Free Shipping
Apex VS5RS 18x10" ET25 Wheel Set Apex 10" wheel set for the front and rear of your BMW. These are a bit wider than stock to put more rubber to the road. This helps to reduce understeer on cars with staggered wheel sets and gives you the option to rotate tires. If you're tracking your BMW you should absolutely have a square wheel set (the same size front and rear). Adding a wider wheel will get you more rubber where it counts - reducing understeer and improving initial turn-in. APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.
Show More Show Less
Liqui Moly Synthoil Premium Engine Oil (5w-40) - Case Of 12
10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!
Liqui-Moly - Corporate Logo
T#:588074
Part#: 2040/12KT
In Stock
Sale - Save 10% $ 180.00
$ 162.00 USD
Free Shipping
Sale - Save 10% $ 180.00
$ 162.00 USD
Free Shipping

Synthoil Premium Engine Oil (5w-40) - Case Of 12

Ensure optimal performance and protection for your BMW engine with the Synthoil Premium Engine Oil (5w-40) - Case Of 12. Crafted to meet the high demands of modern engines, this engine oil is a top-tier synthetic blend that offers superior lubrication and engine cleanliness. With a carefully formulated composition, it provides outstanding wear protection, maintains stability under extreme temperatures, and minimizes deposits, promoting engine longevity and efficiency.

Key Benefits:

  • Superior engine protection and lubrication
  • Maintains stability in extreme temperatures
  • Minimizes engine deposits for cleaner operation
  • Ensures outstanding wear protection for engine components
  • Promotes engine longevity and efficiency
Show More Show Less
Active Autowerke - Corporate Logo
T#:2393416
Part#: 11-043B
In Stock
$ 350.99 USD
Free Shipping
$ 350.99 USD
Free Shipping

Active Autowerke has released the F87-specific exhaust tips! These 90MM tips replace the small and ugly OEM tips found on the M2. 

Active Autowerke’s new exhaust tips were developed specifically for the F87 M2. This allows them to fully conceal the remaining OEM piping.

The tips are fully adjustable, which helps guarantee you’ll find the perfect fitment.

Each kit includes a 10MM exhaust mount bushing ensuring compatibility with any rear diffuser.

Dimensions:

  • Pipe opening: 70MM
  • Tip opening: 90MM
  • Overall length: 119MM
  • Visible tip length: 90MM

Fits the following vehicles:
2015+ F87 BMW M2

Show More Show Less

Liqui Moly Universal Cleaner - 1 Liter
10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!
Liqui-Moly - Corporate Logo
T#:587533
Part#: 20396
In Stock
Sale - Save 10% $ 26.99
$ 24.29 USD
Free Shipping on orders $49 and up
Sale - Save 10% $ 26.99
$ 24.29 USD
Free Shipping on orders $49 and up
Concentrated Universal Cleaner that can be diluted with water. Phosphate-free, silicate-free and solvent-free. Biologically degradable. For mixing ratios up to 1:2,000, depending on the application. Application: Can be applied by spraying or immersion, or wiping with brushes, cloths or sponges. Cleaning by spraying: Dilute with water according to requirements and spray it onto the surface of the object. Allow cleaner to act for a brief period before rinsing off with water. Cleaning by immersion: Dilute with water according to requirements. Immerse the object and rinse off with water after allowing the cleaner to act for short time. Wiping: Dilute with water according to requirements and apply to dry or pre-dampened surface. Allow cleaner to act for a brief period before rinsing off. Note: Do not use in concentrated form or allow to dry onto surface to be cleaned. Treat non-ferrous heavy metals and light alloys only briefly and rinse thoroughly with water. The product has a powerful degreasing effect and if used repeatedly in high concentrations will cause colors to fade. Always test on hidden areas first if using on sensitive materials. Mixing ratio with water for various applications: Cleaning engines, engine compartments, bodies, door edges, truck tarpaulins and superstructures 1:5 to 1:10 Removal of insect remains 1:10 Cleaning wheel rims 1:2 to 1:5 Machine tools 1:10 to 1:40 Plastic covers 1:10 to 1:20 Workshop floors and walls - manually - 1:20 to 1:40 Road tunnels, boundary posts - mechanically - 1:40 to 1:60 Chemical pre-wash in brush systems 1:5 to 1:10 High-pressure and steam jet appliances 1:10 to 1:20 Copolymere de-waxers 1:3 to 1:5 Workshop windows, glass panes 1:500 to 1:2,000 Vehicle interiors 1:10 to 1:50
Show More Show Less

APEX Wheels - Corporate Logo
T#:180706
Part#: ARC81810ET25AN
In Stock
$ 399.00 USD
Free Shipping
$ 399.00 USD
Free Shipping
18x10" ET25 Anthracite Concave APEX ARC-8 Wheel 19.95lbs
Wheel Specs
Fitment:Rear
Size:18x10.0"
Offset (mm):25
Weight (lbs):19.95
Profile:Concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less
Active Autowerke - Corporate Logo
T#:590914
Part#: AASIGNATUREPLAQU
In Stock
$ 45.00 USD
Free Shipping
$ 45.00 USD
Free Shipping
Stand out from the crowd, and give them a hint of what you've got going on under the hood, with the official Active Autowerke Signature Emblem! The emblem can be placed anywhere on the exterior, or interior of your BMW. Hefty stainless steel construction and durable double-sided tape will help ensure that it is never lost, even at speeds over 170+ MPH...Don't ask us how we know! Represent your favorite BMW tuner for all to see today!
Show More Show Less

APEX Wheels - Corporate Logo
T#:19395580
Part#: FL518930SQ
Ships in 5 Business Days
Starting at $ 1,716.00 USD
Free Shipping
Starting at $ 1,716.00 USD
Free Shipping
Apex FL-5 18x9" ET30 Wheel Set Apex 9" wheel set for the front and rear of your BMW. These are a bit wider than stock to put more rubber to the road. This helps to reduce understeer on cars with staggered wheel sets and gives you the option to rotate tires. If you're tracking your BMW you should absolutely have a square wheel set (the same size front and rear). Adding a wider wheel will get you more rubber where it counts - reducing understeer and improving initial turn-in. APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.
Show More Show Less
APEX Wheels - Corporate Logo
T#:387026
Part#: EC7189535X4
Ships in 2 Business Days
Starting at $ 1,596.00 USD
Free Shipping
Starting at $ 1,596.00 USD
Free Shipping
Apex EC-7 18x9.5" ET35 Wheel Set Apex 9.5" wheel set for the front and rear of your BMW. These are a bit wider than stock to put more rubber to the road. This helps to reduce understeer on cars with staggered wheel sets and gives you the option to rotate tires. If you're tracking your BMW you should absolutely have a square wheel set (the same size front and rear). Adding a wider wheel will get you more rubber where it counts - reducing understeer and improving initial turn-in. APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.
Show More Show Less

APEX Wheels - Corporate Logo
T#:19395583
Part#: SM1018930SQ
Ships on Aug 13, 2025
Starting at $ 1,696.00 USD
Free Shipping
Starting at $ 1,696.00 USD
Free Shipping
Apex SM-10 18x9" ET30 Wheel Set Apex 9" wheel set for the front and rear of your BMW. These are a bit wider than stock to put more rubber to the road. This helps to reduce understeer on cars with staggered wheel sets and gives you the option to rotate tires. If you're tracking your BMW you should absolutely have a square wheel set (the same size front and rear). Adding a wider wheel will get you more rubber where it counts - reducing understeer and improving initial turn-in. APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.
Show More Show Less

APEX Wheels - Corporate Logo
T#:20551627
Part#: EC71810ET33
Ships on Aug 19, 2025
Starting at $ 1,596.00 USD
Free Shipping
Starting at $ 1,596.00 USD
Free Shipping
18x9 ET30/31 18x10 ET33/40 APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.
Show More Show Less
APEX Wheels - Corporate Logo
T#:20584600
Part#: EC7189H95ST
Ships on Sep 16, 2025
Starting at $ 1,596.00 USD
Free Shipping
Starting at $ 1,596.00 USD
Free Shipping
Apex ARC8 18x9 ET 30/31 18x10 ET33 Staggered Wheel Set APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.
Show More Show Less
APEX Wheels - Corporate Logo
T#:20584598
Part#: EC7191025ST
Ships in 5 Business Days
Starting at $ 1,876.00 USD
Free Shipping
Starting at $ 1,876.00 USD
Free Shipping
19x10 ET25 19x11 ET43/44 APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.
Show More Show Less


APEX Wheels - Corporate Logo
T#:387386
Part#: EC71885H95L4
Ships in 5 Business Days
Starting at $ 1,516.00 USD
Free Shipping
Starting at $ 1,516.00 USD
Free Shipping

APEX EC-7 18" Staggered Wheel Set -- 18x8.5" / 18x9.5"

This set of 8.5" and 9.5" ARC-8 wheels is an easy staggered fitment for the E46 M3 and Z4M models. These are a direct fit with no spacers or fender rolling required. We use an 8.5" ET35 on the front and a 9.5" ET22 on the rear. These are only slightly wider than the stock sizes. The rear wheels have a deeper curve to the spokes than the front wheels, emphasizing the RWD chassis and adding some muscularity to the stance.

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

Show More Show Less
Active Autowerke - Corporate Logo
T#:2393418
Part#: 11-043C
Ships in 3 Business Days
$ 711.99 USD
Free Shipping
$ 711.99 USD
Free Shipping

Active Autowerke has released the F87-specific exhaust tips! These 90MM tips replace the small and ugly OEM tips found on the M2. 

Active Autowerke’s new exhaust tips were developed specifically for the F87 M2. This allows them to fully conceal the remaining OEM piping.

The tips are fully adjustable, which helps guarantee you’ll find the perfect fitment.

Each kit includes a 10MM exhaust mount bushing ensuring compatibility with any rear diffuser.

Dimensions:

  • Pipe opening: 70MM
  • Tip opening: 90MM
  • Overall length: 119MM
  • Visible tip length: 90MM

Fits the following vehicles:
2015+ F87 BMW M2

Show More Show Less
APEX Wheels - Corporate Logo
T#:20584670
Part#: EC71895105ST
Ships in 8 Business Days
Starting at $ 1,736.00 USD
Starting at $ 1,736.00 USD
19x9.5 ET28 19x10.5 ET45 APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.
Show More Show Less

APEX Wheels - Corporate Logo
T#:19395591
Part#: ARC817942SQ
Ships in 9 Business Days
Starting at $ 1,316.00 USD
Free Shipping
Starting at $ 1,316.00 USD
Free Shipping
Apex ARC8 17x9" ET42 Wheel Set Apex 9" wheel set for the front and rear of your BMW. These are a bit wider than stock to put more rubber to the road. This helps to reduce understeer on cars with staggered wheel sets and gives you the option to rotate tires. If you're tracking your BMW you should absolutely have a square wheel set (the same size front and rear). Adding a wider wheel will get you more rubber where it counts - reducing understeer and improving initial turn-in. APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.
Show More Show Less

APEX Wheels - Corporate Logo
T#:589565
Part#: EC7199510SMBKKT
Ships in 5 Business Days
$ 1,836.00 USD
$ 1,836.00 USD
APEX EC-7 19" Staggered Wheel Set -- 19x9.5" / 19x10.5" APEX light-alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still lightweight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.
Show More Show Less
Sunex - Corporate Logo
T#:641915
Part#: 8845D
Ships in 6 Business Days
$ 79.99 USD
Free Shipping
$ 79.99 USD
Free Shipping
Complete set of spark plug sockets.

APEX Wheels - Corporate Logo
T#:19428693
Part#: ARC8198535SQ
Ships in 1 Business Day
Starting at $ 1,676.00 USD
Free Shipping
Starting at $ 1,676.00 USD
Free Shipping
19x8.5 ET35 APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.
Show More Show Less
Active Autowerke - Corporate Logo
T#:21045551
Part#: 11-077
Ships in 3 Business Days
$ 474.99 USD
Free Shipping
$ 474.99 USD
Free Shipping

Replacement Connecting Pipes for BMW F87 M2C/M2CS

Upgrade your BMW F87 M2C/M2CS exhaust system with these precision-engineered replacement connecting pipes, specifically designed for users of Active Autowerke's groundbreaking Equal Length Midpipe (patent pending). Crafted for discerning BMW enthusiasts, these connecting pipes ensure seamless integration and enhanced performance.

  • Tailored replacement connecting pipes for BMW F87 M2C/M2CS owners
  • Designed for compatibility with Active Autowerke's Equal Length Midpipe
  • Precision engineering for optimal fit and improved exhaust system performance
  • Ideal for those seeking elevated performance and seamless integration
Show More Show Less

Active Autowerke 90mm Exhaust Tips - Matte Black - F8X
Designed for use with Active Autowkere exhaust system - not designed for use with stock BMW exhaust
Active Autowerke - Corporate Logo
T#:397511
Part#: 11-044
Ships in 3 Business Days
$ 284.99 USD
Free Shipping
$ 284.99 USD
Free Shipping

Active Autowerke has released the F87-specific exhaust tips! These 90MM tips replace the small and ugly OEM tips found on the M2. 

Active Autowerke’s new exhaust tips were developed specifically for the F87 M2. This allows them to fully conceal the remaining OEM piping.

The tips are fully adjustable, which helps guarantee you’ll find the perfect fitment.

Each kit includes a 10MM exhaust mount bushing ensuring compatibility with any rear diffuser.

Dimensions:

  • Pipe opening: 70MM
  • Tip opening: 90MM
  • Overall length: 119MM
  • Visible tip length: 90MM

Fits the following vehicles:
2015+ F87 BMW M2

Show More Show Less

Active Autowerke - Corporate Logo
T#:397303
Part#: 15-004
Ships in 3 Business Days
$ 284.99 USD
Free Shipping
$ 284.99 USD
Free Shipping

This kit from Active Autowerke replaces the weak plastic charge pipe with a new aluminum part, secured with a high-quality silicone couple. When you're building a high-powered turbocharged engine, or even just looking for peace of mind on a stock application, durability modifications are just as important - if not more important - than adding power. If your charge pipe fails, it results in a huge vacuum leak that sends your ECU into limp mode, diminishing performance significantly. Don't wait - upgrade your charge pipe today!

This product fits the following BMWs:
2016+ F87 M2
2014+ F22 M235i 
2012+ F30 335i
2014+ F32 / F33 / F36 435i
 

Show More Show Less
Active Autowerke - Corporate Logo
T#:2393407
Part#: 11-074
Ships in 3 Business Days
$ 56.99 USD
Free Shipping on orders $49 and up
Needed for some added rear exhaust systems as the stock cable may be too short.
APEX Wheels - Corporate Logo
T#:19428671
Part#: ARC817859ST
Ships on Jul 24, 2025
Starting at $ 1,296.00 USD
Free Shipping
Starting at $ 1,296.00 USD
Free Shipping
Apex ARC8 17x8.5" ET40/17x9 ET42 Staggered Wheel Set APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.
Show More Show Less


APEX Wheels - Corporate Logo
T#:18700336
Part#: VS5RS1995E22STKT
Ships in 5 Business Days
$ 3,636.00 USD
$ 3,636.00 USD
Spring Line Forged wheels from Apex Wheels feature: Side milled spoke design to cut out excess material and gain wider and deeper spokes. Reinforced critical structure points to add inner lip strength and increase load rating. Weight optimized to balance strength and maintain a lighter design. Independently tested for rigorous JWL standards based on duration, impact, and total loading. High clearance barrel design for Big Brake Clearance. Paintless Knurled Beads that keeps your tire from slipping with sharp and maximized grip! Impact Socket friendly to support oversized race lugs and faster wheel changes with impact sockets. Laser-engraved specs to easily identify your wheel collection at home or in a hurry at the track! Wheel Specs: Staggered Setup 2 Front Medium Concave - 19x9.5" ET22 Brushed Clear APEX VS-5RS Forged BMW Wheels 2 Rear Deep Concave - 19x10.5" ET45 Brushed Clear APEX VS-5RS Forged BMW Wheel The best wheels to come to market at an even better price. These forged Sprint Line wheels have so many benefits why would you ever buy another wheel. VS-5RS wheels start off as a blank profile made specifically by Apex wheels, with about 10,000 metric tons of pressure the aluminum starts off as a robust metal eliminating porosity and improving the structure of the wheel to start off as strong as possible. On top of all of these benefits that focus on the best user experience possible Apex Wheels goes one step further. These forged wheels are always hubcentric built for your select vehicle application, made to fit TPMS sensors and OE center caps to get a factory look with improved performance. This is a wheel you can depend on! Comes with a LIFETIME WARRANTY against material and workmanship defects and a 1 YEAR warranty on the finish of the wheels. If your already sold on these wheels there is one last final benefit that will boost your confidence to drive these wheels to the moon and back; Apex Wheels offers 50% OFF replacement wheels no matter the damage to make sure your favorite wheel setup can go on forever!
Show More Show Less
Active Autowerke - Corporate Logo
T#:397509
Part#: 11-043
Ships in 3 Business Days
$ 284.99 USD
Free Shipping
$ 284.99 USD
Free Shipping

Active Autowerke has released the F87-specific exhaust tips! These 90MM tips replace the small and ugly OEM tips found on the M2. 

Active Autowerke’s new exhaust tips were developed specifically for the F87 M2. This allows them to fully conceal the remaining OEM piping.

The tips are fully adjustable, which helps guarantee you’ll find the perfect fitment.

Each kit includes a 10MM exhaust mount bushing ensuring compatibility with any rear diffuser.

Dimensions:

  • Pipe opening: 70MM
  • Tip opening: 90MM
  • Overall length: 119MM
  • Visible tip length: 90MM

Fits the following vehicles:
2015+ F87 BMW M2

Show More Show Less