BMW Suspension Parts for BMW F87 M2 N55 3.0L

Ohlins Road And Track DFV Coilovers - F80/F82 M3 M4, F87 M2

T#:593661

Part#: BMU MR41

In Stock

$ 3,668.99 USD

Add to Wish List

Qty

$ 3,668.99 USD

Add to Wish List

Ohlins Racing has a long history dating back to 1976 of providing premium motorcycle and automotive suspension systems to numerous racing teams, individual racers, and OE brands such as BMW Motorsport, Audi, Lamborghini. Pagani, Ducati and Kawasaki. Over time, thanks to extensive R&D, testing, and tuning, their products have evolved into some of the highest quality suspension systems in the world, providing years of flawless operation on both the street and the track. Ohlins' latest automotive suspension system, the DFV (Dual Flow Valve) Road and Track Coilover Kit, has bridged the gap between comfortable stock suspension and track focused coilover kits. These kits provide a ride that glides over typical bumps and dips in the road, all without the typical hard rattle and harsh feel of usual coilovers, and turn in tight and maintain tire grip and traction in corners significantly better than stock suspension ever could. This is all thanks to the spring rate chosen and Ohlins and their signature Dual Flow Valve. The DFV maintains comfort and agility by giving the same characteristics for both rebound and compression, allowing the wheel and tire to maintain constant contact with the road/track for maximum control. The Dual Flow Valve works by controlling shock fluid flow based on resistance and impact velocity. This is controlled in both compression and rebound, giving the quick shock operation that helps maintain traction. At low shaft travel speeds, oil flows mostly through the shaft jet bleed. At higher shaft speeds, oil flows mostly through the compression/rebound ports in the piston. At very high shaft speeds, or during sudden accelerations from potholes or large bumps in the road, oil can then escape through the ports in the DFV, absorbing a large amount of energy that would otherwise throw off the balance and control of the vehicle and keeping the tire planted firmly on the ground. With all three compression and rebound ports working together according to pressure and shaft speed, the result is the notorious premium suspension feel that only Ohlins can offer. In addition to managing the rebound and compression control, coilovers must also properly address heat changes in the shock oil. As the shock is pushed harder and longer, the oil quickly heats up due to friction and compression, and the oils flow characteristics change. The hotter the oil is, the easier it is for it to travel through ports and valves. To prevent this typical fade in control, Ohlins has implemented a temperature controlled needle bleed valve system that will expand as temperatures rise, slowly increasing restriction in the fluids flow through the valve gap. This produces a consistent dampening rate that maintains the vehicle's suspension characteristics lap after lap, turn after turn, no matter how hard you push your suspension's capabilities. Features: DFV (Dual Flow Valve) Adjustable ride-height Fully rebuildable Corrosion salt spray tested (ISO 9227) Includes hardware and installation instructions 2 year Limited Warranty Specs: Recommended Front Spring Rating: 515 lbs/in ( 9 k/mm) Recommended Rear Spring Rating: 1087 lbs/in ( 19 k/mm) *Now available are optional EDC Cancellation Modules that will prevent any lights or issues with suspension control systems. Turner Motorsport reccommends purchasing these in addition to the suspension kit to get the most out of your Ohlins suspension system. Ohlins Racing has a long history dating back to 1976 of providing premium motorcycle and automotive suspension systems to numerous racing teams, individual racers, and OE brands such as BMW Motorsport, Audi, Lamborghini. Pagani, Ducati and Kawasaki. Over time, thanks to extensive R&D, testing, and tuning, their products have evolved into some of the highest quality suspension systems in the world, providing years of flawless operation on both the street and the track. Ohlins' latest automotive suspension system, the DFV (Dual Flow Valve) Road and Track Coilover Kit, has bridged the gap between comfortable stock suspension and track focused coilover kits. These kits provide a ride that glides over typical bumps and dips in the road, all without the typical hard rattle and harsh feel of usual coilovers, and turn in tight and maintain tire grip and traction in corners significantly better than stock suspension ever could. This is all thanks to the spring rate chosen and Ohlins and their signature Dual Flow Valve. The DFV maintains comfort and agility by giving the same characteristics for both rebound and compression, allowing the wheel and tire to maintain constant contact with the road/track for maximum control. The Dual Flow Valve works by controlling shock fluid flow based on resistance and impact velocity. This is controlled in both compression and rebound, giving the quick shock operation that helps maintain traction. At low shaft travel speeds, oil flows mostly through the shaft jet bleed. At higher shaft speeds, oil flows mostly through the compression/rebound ports in the piston. At very high shaft speeds, or during sudden accelerations from potholes or large bumps in the road, oil can then escape through the ports in the DFV, absorbing a large amount of energy that would otherwise throw off the balance and control of the vehicle and keeping the tire planted firmly on the ground. With all three compression and rebound ports working together according to pressure and shaft speed, the result is the notorious premium suspension feel that only Ohlins can offer. In addition to managing the rebound and compression control, coilovers must also properly address heat changes in the shock oil. As the shock is pushed harder and longer, the oil quickly heats up due to friction and compression, and the oils flow characteristics change. The hotter the oil is, the easier it is for it to travel through ports and valves. To prevent this typical fade in control, Ohlins has implemented a temperature controlled needle bleed valve system that will expand as temperatures rise, slowly increasing restriction in the fluids flow through the valve gap. This produces a consistent dampening rate that maintains the vehicle's suspension characteristics lap after lap, turn after turn, no matter how hard you push your suspension's capabilities. Features: DFV (Dual Flow Valve) Adjustable ride-height Fully rebuildable Corrosion salt spray tested (ISO 9227) Includes hardware and installation instructions 2 year Limited Warranty Specs: Recommended Front Spring Rating: 515 lbs/in ( 9 k/mm) Recommended Rear Spring Rating: 1087 lbs/in ( 19 k/mm) *Now available are optional EDC Cancellation Modules that will prevent any lights or issues with suspension control systems. Turner Motorsport recommends purchasing these in addition to the suspension kit to get the most out of your Ohlins suspension system. Fits the following BMWs: 2013+ F80/82 BMW M3 M4 2016+ F87 BMW M2

Show More Show Less

Ohlins EDC Cancellation Kit - BMW M3 F80, M4 F82

T#:405066

Part#: 35020-02

In Stock at Vendor

$ 655.99 USD

Add to Wish List

Qty

$ 655.99 USD

Add to Wish List

The öhlins EDC Cancellation Kit for Road & Track deactivates control lamps and error reports when electronically adjustable OEM suspension is replaced by a mechanical system. The cancellation kit is just plugged into the original suspension controls. No further programming is needed.

Show More Show Less

BC Racing BR Series Coilover Suspension Kit - F87 M2

T#:555814

Part#: I-75-BR

Back Ordered

$ 1,195.00 USD

Add to Wish List

Qty

$ 1,195.00 USD

Add to Wish List

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you. BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components. The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below. Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically. The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability. All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection.

Show More Show Less

BC Racing BR Series Extreme Low Coilovers - F87 M2

T#:568064

Part#: I-75E-BR

Ships on Oct 21, 2026

$ 1,395.00 USD

Add to Wish List

Qty

$ 1,395.00 USD

Add to Wish List

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you. BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop, up to 5". To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components. The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below. Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically. The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability. All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection. Specs and Features: 6k Front & 12k Rear Spring Rate V-Barrel front & Linear rear springs Valved specifically to spring style and rate Camber Plate Front Mounts Aluminum and Rubber Front Mounts Black Powder Coated Components All OE style brackets and mounting for perfect fit 30 Levels of Simultaneous Compression and Rebound Dampening Extreme Drop version allows additional 1-1.5" lowering over the standard 2-4" lowering from traditional BR suspension kits Shocks are 1" shorter in length and springs are specifically selected for greater lowering capabilities Great for Track, Street, and any other conditions

Show More Show Less

AST 2016-2021 BMW M2 F87 / Competition LCI 5200 Series Coilovers ...

T#:38621397

Part#: RIV-B2104SD

Back Ordered

$ 6,714.00 USD

Add to Wish List

Qty

$ 6,714.00 USD

Add to Wish List

SPL Parts Pro Adjustable Front Sway Bar End Link Pair - F8X M2/3/4 ...

T#:553784

Part#: SPLFEF8X

In Stock

$ 224.00 USD

Add to Wish List

Qty

$ 224.00 USD

Add to Wish List

SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using chromoly seamless straight tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium quality products that are perfect to get your car back in spec.

Show More Show Less

G8X / F8X Adjustable Toe Arm Set | Fall-Line Motorsports - Standard ...

T#:27938407

Part#: FLM-G8X-1FECOTOE

In Stock

$ 329.99 USD

Add to Wish List

Qty

$ 329.99 USD

Add to Wish List

G8X / F8X Adjustable Toe Arm Set | Fall-Line Motorsports - Standard by Turner Motorsport is crafted to enhance the alignment process for BMW enthusiasts. Made in the USA, this standard toe link kit facilitates rapid toe adjustments during alignment, and when combined with the tension strut, it also allows for precise track adjustments. Designed for easy fitment, these arms simplify wheel alignment and camber adjustment, making the setup process quicker and more efficient.

Enhanced Alignment: Enables fast and precise toe adjustments for improved wheel fitment.
Track Adjustment: Works in conjunction with the tension strut for overall track adjustments.
Simplified Setup: Eases camber adjustment and simplifies alignment processes.
Direct Replacement: Matches OEM part number 33322284534 // 33-32-2-284-534.
Multi-Link Suspension Compatibility: Handles dynamic changes in alignment settings effectively.

Fits:

G80 / G81 / G82 / G83 M3 & M4
F80 / F82 M3 & M4
G87 M2
F87 M2

Show More Show Less

SPL Parts Spherical Rear Lower Control Arm Inner Bushing

T#:26904956

Part#: SPLRLBIE9X

In Stock

$ 179.00 USD

Add to Wish List

Qty

$ 179.00 USD

Add to Wish List

Upgrade your vehicle's performance with our replacement rear lower control arm inner bushings. These bushings feature a low-friction, PTFE-lined spherical bearing, enhancing cornering grip and dynamic geometry. By eliminating OEM bushing deflection and binding, our product preserves camber and toe geometry during bumps. Enjoy improved stability and handling precision, thanks to the maintenance-free FK bearings with PTFE linings. Crafted from high-quality materials including 6061-T6 aluminum and FK PTFE-lined spherical bearings, our bushings ensure durability and NVH reduction. Experience the benefits of enhanced performance and reliability with our premium upgrade.

Key Advantages:

Enhanced Rear Cornering Grip Elimination of OEM Bushing Deflection and Binding Improved Dynamic Geometry, Stability, and Handling Precision Maintenance-Free FK Bearings, Manufactured in the US, with PTFE Linings Materials Used:

6061-T6 Aluminum Bearing Shells and Spacers FK PTFE-Lined Spherical Bearings (F1 Specification, Self-Cleaning)

Show More Show Less

SPL Parts Titanium Series Adjustable Rear Toe Arms with Eccentric Loc...

T#:553695

Part#: SPLRTAELF8X

In Stock

$ 449.00 USD

Add to Wish List

Qty

$ 449.00 USD

Add to Wish List

SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using chromoly seamless straight tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium quality products that are perfect to get your car back in spec.

Show More Show Less

SPL Parts Titanium Series Front Tension Rod Pair - E9X E8X F8X ...

T#:553657

Part#: SPLTRE9X

In Stock

$ 629.00 USD

Add to Wish List

Qty

$ 629.00 USD

Add to Wish List

SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using chromoly seamless straight tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium qulaity products that are perfect to get your car back in spec.

Show More Show Less

BMW F8X M2 M3 M4 Chassis Bracing

T#:4070463

Part#: F-BRACE

Ships in 1 Business Day

5% off MSRP $ 99.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 94.00 USD

Add to Wish List

Qty

5% off MSRP

$ 99.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 94.00 USD

Add to Wish List

BMW F8X M2 M3 M4 Chassis Bracing

The BMW F8X M2 M3 M4 Chassis Bracing is designed to enhance the rigidity and stability of the chassis, providing improved handling and performance for your BMW. Turner Motorsport offers this high-quality brace to support better driving dynamics and reduced flex during aggressive driving.

Benefits:

Enhanced Rigidity: Significantly increases chassis stiffness, leading to improved handling and reduced body roll.
Improved Stability: Minimizes chassis flex for more precise steering responses and better overall control.
High-Quality Construction: Made from durable materials to ensure long-lasting performance and reliability.
Easy Installation: Designed for straightforward installation with minimal modifications required.
Optimized Performance: Perfect for both street and track use, enhancing the driving experience and vehicle performance.

Show More Show Less

BC Racing Rear Damping Adjustment Extenders - BR Type

T#:555864

Part#: DMP-EXT

Back Ordered

$ 39.99 USD

Add to Wish List

Qty

$ 39.99 USD

Add to Wish List

The rear damping adjuster on coilovers is usually hidden under a bunch of hard to reach interior panels requiring you to remove carpet, panels and sometimes even the rear seat back in order to adjust the dampening on your BC rear coilovers. The BC Racing rear extender adjuster allow you to make these adjustments without removing the rear interior. Simple make two small holes in the interior above the adjuster and the extension can be passed through the interior panels. Now the adjustments can be performed from above.

Show More Show Less

SPL Parts Pro Adjustable Rear Sway Bar End Link Pair - F8X M2/3/4 ...

T#:553734

Part#: SPLREF8X

In Stock

$ 224.00 USD

Add to Wish List

Qty

$ 224.00 USD

Add to Wish List

When lowering your vehicle it is important to have adjustable end links to correct preload on your sway bars. Sometimes suspension is set improperly from left to right corner - SPL adjustable end links allow you to quickly and properly eliminate preload no matter what the situation calls for.

Show More Show Less

SPL Rear Lower Control Arm Knuckle Bushing - Pair - E9X F3X F8X G8X ...

T#:17804825

Part#: SPLRLCBE9X

In Stock

$ 152.00 USD

Add to Wish List

Qty

$ 152.00 USD

Add to Wish List

These Rear Lower Control Arm Knuckle Bushing replace the rubber factory bushing attaching the lower control arm to the knuckle with a low friction teflon-lined spherical bearing. Replacing the OEM component with this bushing will allow for less deflection under heavy load, and less bind as the arm travels through its suspension. We use the largest possible FK bearing in this location for increased longevity and lower NVH. The housing for the bearing is machined out of 6061-T6 aluminum and is CNC cut to +/- .001" tolerance to insure proper fitment. Sold as a pair. Made in the USA. Replaces BMW Part Numbers: 33326775552 33326756249 Applications: 2006 - 2013 E80, E82, E82M 2011 - 2020 F20, F22, F30, F31, F32, F33, F34, F36 2014 - 2021 F80, F82, F83, F87 2022+ G80, G82, G83, G87

Show More Show Less

SPL Parts Titanium Series Adjustable Front Lower Street Control Arms ...

T#:553775

Part#: SPLFLCAF8X

Ships in 3 Business Days

$ 719.00 USD

Add to Wish List

Qty

$ 719.00 USD

Add to Wish List

SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using chromoly seamless straight tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium quality products that are perfect to get your car back in spec.

Show More Show Less

SPL Parts Titanium Series Rear Upper Control Arm Set - F8X BMW ...

T#:553663

Part#: SPLRUAF8X

Ships in 6 Business Days

$ 809.00 USD

Add to Wish List

Qty

$ 809.00 USD

Add to Wish List

SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using chromoly seamless straight tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium quality products that are perfect to get your car back in spec.

Show More Show Less

SPL Parts Titanium Series Rear Lower Traction Arm Pair - F8X M2 M3 M4...

T#:553689

Part#: SPLRTRF8X

In Stock

$ 449.00 USD

Add to Wish List

Qty

$ 449.00 USD

Add to Wish List

SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using chromoly seamless straight tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium quality products that are perfect to get your car back in spec.

Show More Show Less

BMW F8X M2 M3 M4 Front Sway Bar End Link Kit

T#:5580987

Part#: FLM-F87-1BFLINK

Back Ordered

$ 219.99 USD

Add to Wish List

Qty

$ 219.99 USD

Add to Wish List

BMW F8X M2 M3 M4 Front Sway Bar End Link Kit is essential for achieving optimal corner balance and handling in your BMW. This kit allows for precise adjustments to ensure the sway bar remains properly aligned and stress-free at static ride height. Adjustable sway bar end links are crucial for maximizing mechanical grip and stability during cornering, braking, and acceleration. By ensuring even loading and eliminating any “zero load” points, this kit enhances chassis dynamics and delivers superior performance.

Improved Handling: Ensures the sway bar is completely unloaded and unstressed at static ride height for enhanced chassis dynamics.
Enhanced Corner Balance: Helps achieve an even distribution of weight across each tire, improving stability and grip.
Precision Adjustment: Allows for fine-tuning of the sway bar links to maintain proper alignment and prevent uneven loading.
Durable Protection: Dust boots seal the end links to prevent dust and debris from affecting performance.
Essential for Performance: Critical for those seeking the best handling and cornering performance from their BMW M car.

Show More Show Less

Fall-Line Motorsports Lower Coil Over Camber Arm & Shim Set - G8X / F...

T#:20979735

Part#: F8X/E9X-1FLCOCA

Back Ordered

$ 995.00 USD

Add to Wish List

Qty

$ 995.00 USD

Add to Wish List

*NOTE: ONLY FOR CARS WITH TRUE REAR COIL OVER CONVERSION - NOT COMPATIBLE WITH STOCK REAR SPRINGS* Fall-Line Motorsports has taken everything they've learned in manufacturing over the last decade to create an ultra-high-end interpretation of the G8X / F8X M2 M3 M4 and E9X M3 lower camber arm. Fall-Line's bespoke version discards the deformation-prone stamped steel arm that includes a provision for the rear coil spring in favor of 5-axis CNC machined, billet aluminum that eliminates the rear coil mount. This pair has been gorgeously crafted and pocketed (to save weight without compromising rigidity) and is hard coat black anodized for ultimate resistance to wear. So too has the hardware been given an upgrade—10.9 grade corrosion-resistant extended bolts are included to replace the inferior factory pieces. These arms represent another exciting entry into the often neglected F8X / E9X suspension arm market and add valuable peace of mind for street or motorsport duty from the undisputed champion within the BMW realm. Product Details: For all G8X, F8X, and E9X M3 cars using TRUE Rear Coil Over Conversion ONLY DMG Mori 5-Axis CNC machined, billet aluminum construction Hard coat black anodized Includes Camber Shim Set Sold in pairs

Show More Show Less

Eibach Pro-Kit Spring Set - F87 M2 & M2 Competition

T#:402657

Part#: E10-20-035-01-22

In Stock at Vendor

10% off MSRP $ 439.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 395.00 USD

Add to Wish List

Qty

10% off MSRP

$ 439.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 395.00 USD

Add to Wish List

Looking to lower your BMW for a sportier appearance and improved cornering, performance, and aerodynamics? This spring kit from Eibach is a perfect solution to lower the ride height without compromising the ride quality of your BMW.

With this kit, you can expect an average lowering of:

Front - 1"
Rear - .8"

Show More Show Less

Fall-Line Motorsports G8X / F8X Rear Lower Control Arm Bearing Set - ...

T#:28038181

Part#: FLM-G8X-1BLCABO

Ships in 1 Business Day

$ 329.99 USD

Add to Wish List

Qty

$ 329.99 USD

Add to Wish List

Experience championship-caliber performance with Fall-Line's Lower Control Arm Bearings, proudly Made in the USA. From years of competitive racing, Fall-Line is synonymous with producing top-tier suspension components that excel on the track. The weak link in the latest M Cars' rear camber arms is the rubber bushings, but Fall-Line's new lower control arm bearings offer a game-changing solution. This SKU replaces OEM BMW Part number: 33326792553 Key Features: Designed for all G8X and F8X M cars DMG Mori 5-Axis CNC machined for precision Full stainless bearing assembly including hats, bearings, housing, and spiral locks Sold in pairs; designed to replace the rear control/camber arm outer bearings (BMW Part Number: 33-32-6-792-553) By eliminating rubber from this critical feedback area, Fall-Line provides control over the tire's behavior and confidence behind the wheel at the limit. These bearings feature the largest FK spherical bearings on the market, ensuring strength and longevity even under competition-level loads. Stainless steel spiral locks offer 360 degrees of clamping force, securing the bearing from any potential movement. As a bonus, these spherical bearings outlast OEM rubber variants, eliminating the headache of repeated replacements over your ownership. Please note that, as with any elimination of suspension bushings, there may be a slight increase in noise, vibration, and harshness after installation. Upgrade your suspension with Fall-Line's Lower Control Arm Bearings and take your driving experience to the next level. Invest in championship-level performance with Fall-Line, the trusted name in motorsport.

Show More Show Less

Fall-Line Motorsports G8X / F8X Rear Sway Bar End Link Kit - V2 ...

T#:28038192

Part#: FLM-F8X-G8X-1BRL

Ships in 1 Business Day

$ 198.00 USD

Add to Wish List

Qty

$ 198.00 USD

Add to Wish List

Lowering your car is often the first step in suspension tuning, but occasionally, this process can adversely affect other associated components. Unwanted sway bar pre-load may be one of these consequential effects, adding asymmetrical spring rate bias to one side of the car versus the other. This imbalance may affect your overall chassis dynamics and corner balance. For this reason, adjustable sway bar end links are critical—by adjusting each link with the car at operating weight, you can ensure the sway bar is completely unloaded at your determined ride height, restoring your chassis' balance and your confidence in all driving situations. Unlike all other link kits on the market that utilize the cheaper and simpler jam-nuts, Fall-Line utilizes OE tie-rod end style pinch-nut fasteners to ensure they never lose their set length. NOTE: Installed photos show V1 jam-nut style V2 Key Features: Now includes OE tie-rod end style pinch-nut fastener rod ends Eliminates the typical jam-nut rod ends that are known to move over time Designed for superior corner balancing Ensures equal weight distribution on each tire Compatible with height adjustable dampers Eliminates uneven cross-weights Prevents sway bar-induced suspension stress Allows for precise customization through length variation Includes dust boots to protect against dust interference Made in USA Sold as a pair

Show More Show Less

Fall-Line Motorsports Front Mono Ball Conversion Kit - F87 M2 ...

T#:598880

Part#: FLM-F87-1BUNI

Ships in 4 Business Days

$ 423.00 USD

Add to Wish List

Qty

$ 423.00 USD

Add to Wish List

Fall Line’s mono ball spherical bearing conversion kit transforms the front steering and suspension feel of the M2. The factory rubber bushing is very large, and is prone to substantial deflection under load, as the M2 is put through its paces. Deflection of the bushing can create unwanted geometry change, steering wobble under braking, and even hysteresis of the thrust arm. The bearing’s housing is precision machine from aluminum, to create a rigid part that allows for the M2’s thrust arm to move smoothly through its range of suspension travel. The improvement in steering and suspension feel is immediate and truly enhances the personality of the M2.

Show More Show Less

MMX Front Drop Links - F8x M2/M3/M4

T#:4565866

Part#: MMR24-1001

Ships in 2 Business Days

$ 283.99 USD

Add to Wish List

Qty

$ 283.99 USD

Add to Wish List

OEM end links were designed to compliment standard ride height but when this is changed the car will now be pulling your anti-roll bar ends up, pushing it out of its operating window, and forcing the link to sit at a sharper angle. MMR Performance adjustable drop links are an essential upgrade to any lowered or performance car. When you lower your BMW without changing out your swaybar end links, a significant amount of preload is applied to the swaybar. This can negatively affect the handling characteristics of your vehicle and cause unwanted stress on a number of other suspension components. Features: Made from T6061 Aluminum Anodized in signature MMR Dark Anthracite Heavy-duty ball joints to ensure a long life span

Show More Show Less

SPL Parts Titanium Series Adjustable Rear Toe Arm Pair - F8X M2/3/4 ...

T#:553694

Part#: SPLRTAF8X

Ships in 1 Business Day

$ 404.00 USD

Add to Wish List

Qty

$ 404.00 USD

Add to Wish List

When lowering your vehicle, toe alignment is thrown off. These SPL adjustable toe arms offer a wide range of toe adjustment and are a significant improvement over stock, eliminating suspension deflection and increasing handling response thanks to the FK Bushings rod ends that are Teflon lined.

Show More Show Less

Rear Upper Control Arm Set - F8X

T#:5580939

Part#: FLM-F8XWUAK

In Stock

$ 1,040.00

This product was last offered at the strikethrough price on
05-19-2026

$ 990.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 1,040.00

This product was last offered at the strikethrough price on
05-19-2026

$ 990.99 USD

Limited Qty Sale

Add to Wish List

These upper wishbones boast two major benefits: replace the OEM rubber bushings with spherical units and add valuable adjustability versus the standard, fixed arm. The new adjustment capabilities allow ultra fine-tuning within the full-suspension suite—the more consistent suspension geometry, amongst other benefits, results in significantly improved performance and confidence in all driving conditions.

Show More Show Less

Fall-Line Motorsports G8x / F8x M2 / M3 / M4 Rear Upper Control Arm B...

T#:27938412

Part#: FLM-G8X-1BRUCA

Back Ordered

$ 385.00 USD

Add to Wish List

Qty

$ 385.00 USD

Add to Wish List

MADE IN THE USA. Rubber bushings found in the G8X’s rear upper arms are the last weak link in an otherwise rigid suspension. The original BMW bushings yield to cornering forces applied to the suspension, resulting in camber and toe change that is not ideal for performance driving. Fall Line’s kit replaces the soft upper control arm bushings with spherical bearings, enabling the rear suspension arms to move smoothly through their travel and giving the rear of a car a more solid, planted feel. The reduced geometry change allows for the car to retain its desired alignment, maintaining better control over the tire’s behavior under heavy load. Designed to replace the inner bushings of the rear upper control arms; BMW Part Numbers: 33322284777, 33329504611, and 33329504612. The BMW M cars feature a subframe that is directly mounted to the chassis by BMW M, to reduce suspension compliance and improve performance and driving feel. Similarly, the Fall Line upper control arm bearings rigidly mount the suspension arms to the subframe, increasing driver feedback, reducing geometry change, and improving performance. As with any elimination of suspension bushings, more feedback does equate to more road and suspension noise. While the Fall Line rear upper control arm bearings are a substantial performance improvement, please do be prepared for increased noise, vibration, and harshness after installing the parts. Product Details: DMG Mori 5-Axis CNC machined Full stainless bearing assembly (hats, bearing, housing, spiral locks) Price is per set of 4 (2 per side); designed to replace the inner bushings of the rear upper control arms (BMW Part Numbers: 33-32-2-284-777, 33-32-9-504-611, & 33-32-9-504-612)

Show More Show Less

Fall-Line Motorsports G8X / F8X Rear Lower Tension / Fixed Toe Arm Se...

T#:27938408

Part#: FLM-G8X-1FRTAK

Ships in 3 Business Days

$ 679.99 USD

Add to Wish List

Qty

$ 679.99 USD

Add to Wish List

This item can function as the Rear Lower Tension Arm, as well as a Fixed Toe Arm. This SKU replaces OEM BMW Part number: 33322284534 Experience championship-level performance with Fall-Line Motorsports' precision-engineered suspension components. Crafted from aircraft-grade billet aluminum and finished with military-spec hard coat anodizing, these components are designed to elevate your driving experience to victory. Improved Handling and Durability Fall-Line's F8X / G8X lower tension arms and fixed toe arms are built to excel in motorsport conditions. Their CNC-machined, one-piece construction ensures both strength and longevity. Featuring the largest FK spherical bearings on the market, these arms eliminate rubber from critical areas, giving you ultimate control over your car's tire behavior and enhancing your confidence behind the wheel. Stainless steel spiral locks provide 360-degree clamping force for a secure fit under competition-level loads. Long-Lasting Performance Our spherical bearings outlast OEM rubber variants, sparing you the hassle of repeated replacements. While these suspension upgrades offer improved feedback and handling, they may result in a slight increase in noise, vibration, and harshness. Product Details: Compatible with all G8X and F8X M cars DMG Mori 5-Axis CNC machined 6061-T6 aluminum Full stainless bearing assembly (hats, bearing, housing, spiral locks) Sold in pairs; designed to replace rear trailing/tension arms (BMW Part Number: 33-32-2-284-534) MIL Spec hard coat clear anodizing Made in the USA Fixed toe arms retain factory Eccentric bolt adjustment

Show More Show Less

SPL Parts Caster Adjustable Tension/Trailing Rod Bushings - E8X E9X F...

T#:553806

Part#: SPLCRBE9X

Ships in 1 Business Day

$ 413.00 USD

Add to Wish List

Qty

$ 413.00 USD

Add to Wish List

SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using chromoly seamless straight tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium quality products that are perfect to get your car back in spec.

Show More Show Less

Fall-Line Motorsports F8X M2 / M3 / M4 Rear Upper Control Arm Set ...

T#:28038190

Part#: FLM-F8X-1FWUAK

In Stock

$ 1,040.00 USD

Add to Wish List

Qty

$ 1,040.00 USD

Add to Wish List

From years of competitive race experience, Fall-Line has become synonymous with producing not only championship caliber race cars, but the finest suspension components that help propel them to victory. As the final piece within Fall-Line’s suite of rear suspension offerings for the F8X M2 / M3 / M4, these upper wishbones boast two major benefits: replace the OEM rubber bushings with spherical units and add valuable adjustability versus the standard, fixed arm. The new adjustment capabilities allow ultra fine tuning within the full suspension suite—the more consistent suspension geometry, amongst other benefits, results in significantly improved performance and confidence in all driving conditions. These arms are direct replacements for BMW Part No. 33322284777. The F8X cars will notice an immediate difference due to its unique subframe and chassis relationship—torsional rigidity is further improved with the addition of these arms with only marginal increases in NVH. As an added benefit, the spherical bearings will outlast the OEM rubber variants, saving the headache of repeated replacement over your ownership. Product Details: Fits all F8X M2 / M3 / M4 Motorsport clamp-style fastener for faster, more reliable alignment adjustments Long-life FK spherical bearings Made in USA Replaces OEM BMW Part Numbers: 33-32-2-284-777

Show More Show Less

Adjustable Rear Upper/Inner Camber Bushings - BMW F22/23 F3X ...

T#:16474811

Part#: 193926-9G

Special Order: No Guaranteed ETA

$ 320.00 USD

Add to Wish List

Qty

$ 320.00 USD

Add to Wish List

Nearly every car manufactured in the modern era carries a dark secret – fully-adjustable suspension has been all but eliminated in the name of cost-cutting and assembly-line efficiency. What this means for you is increased tire wear and more frequent replacement, as a “full alignment” consists only of rudimentary toe-angle adjustment. For over forty years, K-MAC has been hard at work developing a solution to this problem with patented innovations in camber/caster plates and bushing kits, allowing easy adjustment and a true “full four-wheel alignment” to be performed by any competent shop. These bushings make camber adjustments possible for the first time, and improve the ability to complete toe angle adjustments. When used in conjunction with the K-MAC Camber and Toe kit and Rear Adjustable Trailing Arms allows full adjustability of the 5 multi-link rear arms and positive location. Bolt-on installation – insertion/extraction tube included! Easily adjusted on the car with basic hand tools Unique failsafe locking hardware – set & forget! High quality elastomer compound resists binding Hardened & nickel-chrome plated centers for maximum bushing life 2x the load area of stock bushings Spiral grease grooves

Show More Show Less

Adjustable Rear Upper/Inner Camber Bushings

T#:600206

Part#: 193926-3H

Special Order: No Guaranteed ETA

$ 320.00 USD

Add to Wish List

Qty

$ 320.00 USD

Add to Wish List

Nearly every car manufactured in the modern era carries a dark secret – fully-adjustable suspension has been all but eliminated in the name of cost-cutting and assembly-line efficiency. What this means for you is increased tire wear and more frequent replacement, as a “full alignment” consists only of rudimentary toe-angle adjustment. For over forty years, K-MAC has been hard at work developing a solution to this problem with patented innovations in camber/caster plates and bushing kits, allowing easy adjustment and a true “full four-wheel alignment” to be performed by any competent shop. These bushings make camber adjustments possible for the first time, and improve the ability to complete toe angle adjustments. When used in conjunction with the K-MAC Camber and Toe kit and Rear Adjustable Trailing Arms allows full adjustability of the 5 multi-link rear arms and positive location. Bolt-on installation – insertion/extraction tube included! Easily adjusted on the car with basic hand tools Unique failsafe locking hardware – set & forget! High quality elastomer compound resists binding Hardened & nickel-chrome plated centers for maximum bushing life 2x the load area of stock bushings Spiral grease grooves

Show More Show Less

KMAC Stage 2 Street/Tack Front Adjustable Camber/Caster Plates - F80 ...

T#:389648

Part#: 192716-2P

Special Order: No Guaranteed ETA

$ 795.00 USD

Add to Wish List

Qty

$ 795.00 USD

Add to Wish List

KMAC camber/caster plates use a patented adjustment method designed for easy and rapid alignment adjustments. The KMAC design has a 'floating' inner camber plate, rather than slotted, to allow camber and caster to be adjusted together. To adjust, simply loosen the top three nuts on the strut tower and position the KMAC mount to match your desired alignment settings. The KMAC design allows more camber and caster adjustment because separate caster hardware is eliminated. While primarily designed to increase negative camber for track use these can also be used to fix alignment issues that cause uneven tire wear or unwanted handling behavior.

Show More Show Less

IRP Performance Rear Lower Control Arm Bushing - Inner - 8x, E9x, F87...

The lowest arm housing the coil spring

T#:2408498

Part#: IRPRSB-9XMB2

Special Order: No Guaranteed ETA

$ 176.99 USD

Add to Wish List

Qty

$ 176.99 USD

Add to Wish List

Enhance road feel and keep your vehicle more planted with these upgraded aluminum bushings. Less play allows for more precise suspension articulation, making for a better performance driving experience.

Show More Show Less

IRP Rear Adjustable Lower Control Arms

T#:2423536

Part#: IRPLCA-FXMR

Ships on Nov 5, 2026

Starting at $ 349.00 USD

Add to Wish List

Starting at $ 349.00 USD

Add to Wish List

Featuring Fluro Bearings

MMX Underbody Chassis Brace - F80, F82, F83, F87

T#:55713525

Part#: MMR13-1000

In Stock

$ 295.00 USD

Add to Wish List

Qty

$ 295.00 USD

Add to Wish List

The MMX Performance Underbody Chassis Brace is engineered specifically for the F8x platform to eliminate the unwanted flex that plagues the factory mid-section. On the track or your favorite backroad, flex alters your alignment mid-corner, reducing tire contact patch.

Show More Show Less

MMX Performance G8X / F8X Adjustable Toe Arm Set

T#:56363320

Part#: MMR55-1609

Ships in 3 Business Days

$ 495.00 USD

Add to Wish List

Qty

$ 495.00 USD

Add to Wish List

Engineered specifically for the BMW M2, M3, and M4, MMX Performance Adjustable Toe Arms replace flexing factory bushings with precision pillow ball rod ends. CNC machined from lightweight billet 6061-T6 aluminum, these arms lock in your alignment specs under cornering

Show More Show Less

MMX Performance G8X / F8X OEM Rear Camber Arm Bearing Set

T#:56363328

Part#: MMR55-1651

Ships in 3 Business Days

$ 210.99 USD

Add to Wish List

Qty

$ 210.99 USD

Add to Wish List

Eliminate suspension compliance and lock in your alignment settings with the MMX Performance Rear Camber Arm Spherical Bearing Set. The factory rubber bushings on the F8X/G8X platform introduce unwanted deflection under load, leading to shifts during hard cornering, braking, and power delivery.

Show More Show Less

MMR Performance Lowering Springs - F87 M2

T#:39768320

Part#: MMR08-1002

Ships in 3 Business Days

$ 332.99 USD

Add to Wish List

Qty

$ 332.99 USD

Add to Wish List

The MMR Performance lowering springs for BMW OG M2 and M2 Competition models deliver the perfect blend of improved dynamics and enhanced looks, yet without sacrificing ride quality. The 30-35mm drop in ride height brings the M-Car to life making it feel lighter, more direct and with significantly sharper turn-in. Finished in MMR metallic grey, our springs are developed to be fully compatible with cars fitted with either static or dynamic dampers. A must-fit for any BMW M2 F87. Features: A front drop of 30mm whilst the rear sits lower by 35mm. Fully compatible with cars fitted with either static or dynamic dampers. Perfect blend of improved dynamics and enhanced looks, yet without sacrificing ride quality. Specifically designed by us for the M2. Bespoke spring poundage for improved driving dynamics. Finished in MMR metallic grey.

Show More Show Less

MMX Performance G8X / F8X OEM Rear Toe/Traction Arm Bearing Set ...

T#:56363322

Part#: MMR55-1650

Ships in 3 Business Days

$ 269.99 USD

Add to Wish List

Qty

$ 269.99 USD

Add to Wish List

The MMX Performance Rear Toe/Traction Arm Bearing Set deletes that deflection, locking down your G8X or F8X chassis for pure, predictable cornering.

IRP Aluminum Rear Lower Camber Arms - Gold Finish - F87 M2, F8X M3 M4...

T#:4469705

Part#: IRPLCA-FXMAL

Ships in 5 Business Days

$ 518.99 USD

Add to Wish List

Qty

$ 518.99 USD

Add to Wish List

Looking to convert your M-car to a true coilover suspension in the rear? Then you'll want these camber arms! These control/camber arms replace the standard rear control arms that normally work with the barrel springs, eliminating a ton of extra weight and cleaning up the rear suspension. The simple design of these camber arms also allows for more room to work and increased clearance, setting you up perfectly for your rear coilover conversion! *Does not fit with original springs – coilovers must be used to install these arms!

Show More Show Less

IRP Rear Adjustable Upper Control Arms

T#:2423553

Part#: IRPUCA-FXMR

Ships on Nov 5, 2026

Starting at $ 349.00 USD

Add to Wish List

Starting at $ 349.00 USD

Add to Wish List

Featuring Fluro Bearings

MMX Height Adjustable Sport Spring Kit - BMW F8X M2 M2C M3 M4 ...

T#:9416048

Part#: MMR08-1005

Special Order: No Guaranteed ETA

$ 1,152.99 USD

Add to Wish List

Qty

$ 1,152.99 USD

Add to Wish List

Unlike conventional lowering springs, the MMR Height Adjustable Sport Spring kit for F8x M2, M2C, M3 and M4 gives you a fully customisable ride height adjustment. So however you want your car to sit, this Height Adjustable Spring kit allows you to infinitely fine tune heights front and rear until you reach your ideal stance. By retaining the OE dampers, whether fixed or adaptive, this solution costs much less than upgrading to coilovers does - yet with the reassurance of keeping your high quality, durable Adaptive M or static factory dampers in place. Best of both worlds, in other words. The method of adjustment is just the same as on a coilover suspension setup. Four adjustable perches fit underneath the Sport Springs. With a simple turn up or down on the threaded platform to change ride height, you can tailor it until reached your perfect height and rake. This generous sweep of adjustment provides a lowering range of 20-45mm on the front and 10-35mm at the rear (versus factory ride height). The Sport Springs themselves, finished in beautiful MMR Grey, are carefully developed progressive rate springs, with vehicle-specific rates carefully chosen to match with the damper characteristics of the factory suspension. It’s by specifying progressive rate Sport Springs that allows us to deliver the perfect blend of improved dynamics in hard driving, yet without sacrificing ride quality in normal us in the middle of the springs’ travel. Push-on through the corners and the F8x chassis really comes to life, making it feel lighter, more direct and with significantly sharper turn-in. The MMR Height Adjustable Sport Spring kit is a must-fit for any BMW F8x M-car!

Show More Show Less

BC Racing DS Series Coilover Suspension Kit - F87 M2

T#:598302

Part#: I-75-DS

Back Ordered

$ 1,395.00 USD

Add to Wish List

Qty

$ 1,395.00 USD

Add to Wish List

The DS series from BC racing offers increased control and feedback for those looking to achieve the best driving experience possible. Digressive Valving means the shock is firmer at low speed, while transitioning to a softer and more linear feel as (shaft) speed increases. This leads to a much more planted and controlled feeling in the chassis, increased feedback through the wheel, and a slight drop in passenger comfort. Swift Springs are available upon request with your choice of rates and matched or custom valving.

Show More Show Less

Bav Auto Shock and Strut Nut Tool

10X Entries Into Our F80 M3 Sweepstakes

T#:580394

Part#: B8800081

In Stock

Sale - Save 5% $ 123.99

This product was last offered at the strikethrough price on
05-03-2026

$ 117.79 USD

Add to Wish List

Qty

Sale - Save 5%

$ 123.99

This product was last offered at the strikethrough price on
05-03-2026

$ 117.79 USD

Add to Wish List

Used to install or remove shock and strut nuts - no more using an impact gun!

Bav Auto Scissor Type Ball Joint / Tie Rod Separator

10X Entries Into Our F80 M3 Sweepstakes

T#:580366

Part#: B8800042

Ships on Feb 2, 2027

Sale - Save 15% $ 46.99

This product was last offered at the strikethrough price on
05-03-2026

$ 39.94 USD

Add to Wish List

Qty

Sale - Save 15%

$ 46.99

This product was last offered at the strikethrough price on
05-03-2026

$ 39.94 USD

Add to Wish List

Use this tool to separate control arm ball-joints and larger tie-rod end joints. This tool is particularly beneficial when dealing with tight locations that prevent the use of non-scissor separator tools. Note that max jaw opening is 1 3/4".

Show More Show Less

Bav Auto Trailing Arm Inner Bushing Tool - Master Set

10X Entries Into Our F80 M3 Sweepstakes
Be sure to add some grease to the rods in this tool set during installation to prevent breakage.

T#:580442

Part#: B8800137

In Stock

Sale - Save 3% $ 293.99

This product was last offered at the strikethrough price on
05-03-2026

$ 285.17 USD

Add to Wish List

Qty

Sale - Save 3%

$ 293.99

This product was last offered at the strikethrough price on
05-03-2026

$ 285.17 USD

Add to Wish List

Remove and install the two rear inner trailing arm / lower control arm bushings that are in the subframe with one tool set without removing the trailing arms from the vehicle. This tool is designed to work with all trailing arm bushing designs on E82, E84, E90 ,E91, E92, E93 model cars. Replaces bushing part #'s 33326770829 and 33326763092.

Show More Show Less

Bav Auto 9-Way Slide Hammer Puller Set

10X Entries Into Our F80 M3 Sweepstakes

T#:580405

Part#: B8800095

Ships on Sep 30, 2026

Sale - Save 5% $ 104.99

This product was last offered at the strikethrough price on
05-03-2026

$ 99.74 USD

Add to Wish List

Qty

Sale - Save 5%

$ 104.99

This product was last offered at the strikethrough price on
05-03-2026

$ 99.74 USD

Add to Wish List

A complete slide hammer kit for your next suspension job.

Project Cars

SELECT YOUR BMW

BMW Suspension Parts for BMW F87 M2 N55 3.0L

Sub-Categories

BMW F8X M2 M3 M4 Chassis Bracing

Benefits:

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results