BMW Engine Parts for BMW F87 M2 N55 3.0L

Clear BMW chassis

Please ensure your correct model is selected

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

Eldor - Corporate Logo
T#:29234309
Part#: 12138616153
In Stock
$ 43.99 USD
Free Shipping on orders $49 and up

Ignition coils are key to the efficiency and performance of your BMW. With a faulty coil the spark plug is not burning the air/fuel mixture properly and that can lead to problems anywhere in the engine and exhaust (including catalytic converters and O2 sensors). Problems with one or more coils will cause a fault code but not always a check engine light. A misfire code may be related to an ignition coil but could be from other things as well. Sometimes a visual inspection of a coil and coil boot will give an indication of a failure. You can also move coils around to different cylinder banks to see if the misfire code follows a suspect coil. We suggest always having one or two coils on hand to keep as spares.

This is the current replacement for some BMW 6 and 8-cylinder engines built in the late 2000s and after. BMW has made numerous changes to ignition coil part numbers in recent years but has approved this part number to work in the vehicles listed below. It's listed as a replacement coil for N20, N55, and S55 engines. In March 2015 BMW approved it for N51/N52 engines. This part number replaces the previous BMW part number 12137594937 for the cars listed below.

Sold per coil. Includes boot and connector.

Show More Show Less
BMW N55 NGK Performance Iridium Spark Plug Set
We Price Match - Give Us A Call or Chat!
NGK - Corporate Logo
T#:568296
Part#: 97506KT
In Stock
$ 113.99 USD
Free Shipping
$ 113.99 USD
Free Shipping
NOTE: For the N54, these plugs are 2 Steps Colder, while for the N55 they are only 1 Step Colder. When it comes time to change your spark plugs, you may wonder about colder stepped spark plugs as many others have. Colder spark plugs work by pulling more heat out of the engine's cylinders (making them "colder") and dissipating it into the engine's head, which is then cooled by the cooling system. Depending on how you have your engine built, these could be a great addition! Colder plugs can help prevent engine knock and prevent the tip of the spark plug from melting or misfiring. There are two rules that most people tend to go by when deciding on which spark plugs to buy: The first rule of thumb is that with every 100 horsepower added, you should run spark plugs that are a step colder than your stock plugs. This is generally accepted across the motorsports community but unfortunately isn't always the most accurate measurement of when you will need colder plugs. The second rule is to go a step colder any time you massively alter cylinder temperatures by adding forced induction to an NA engine, by increasing compression ratio, after altering timing in a major way, or by changing fuel types to something with a higher octane rating such as racing fuel. Adding spark plugs that are a step colder outside of these conditions, with no real change to the engine, can actually hurt more than help by leading to spark plugs fouling quicker than normal and by making the car harder to start in cold weather conditions. We suggest talking to your engine builder or tuner before making the change, or you can call our Turner Motorsport sales staff to discuss what modifications have been made to your vehicle and see if these plugs are right for you!
Show More Show Less
Bav Auto Spark Plug Socket 12" x 5/8"
10X Entries Into Our F80 M3 Sweepstakes
Bav Auto Tools - Corporate Logo
T#:580385
Part#: B8800072
In Stock
Sale - Save 25% $ 37.99

This product was last offered at the strikethrough price on
05-03-2026

$ 28.49 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 37.99

This product was last offered at the strikethrough price on
05-03-2026

$ 28.49 USD
Free Shipping on orders $49 and up
Magnetic insert holds the spark plug securely in place for easy installation. Works great on many twin can engines where the spark plugs are recessed deep in the cylinder head.

Goldenwrench Supply Co - Corporate Logo
T#:641286
Part#: FXXOCC-R
In Stock
$ 60.00 USD
Free Shipping
$ 60.00 USD
Free Shipping
Give the plain plastic factory oil cap unit an upgrade with the brand new BLACKLINE Performance Billet Oil Cap Cover. Each cap is CNC formed from T6 Aluminum and anodized in a limited release race inspired red color. Featuring an all new Drip G logo, with the BLACKLINE insignia engraved in the cap handle with a reminder to fill the engine with Synthetic Oil Only. All logos and decorations are finalized through a precision 3D milling process, machined into each cap for the ultimate premium finish. The BLACKLINE Performance Billet Oil Cap Cover will fit most BMW vehicles equipped with the N55, S55, S63, and S65 with the round shaped oil cap found in the following vehicles E90/E91/E92 M3 LCI, F22 M235i, F87 M2/M2 Competition, F80 M3, F82 M4, F10/F90 M5, and more (check your oil cap ensuring that it is the round shape as seen in the product photos). Each kit comes with a Billet Oil Cap Cover, and an Installation Instruction Card. This is a not a full cap replacement. The Billet Oil Cap Cover affixes to the top of your factory oil cap installing easily in minutes.
Show More Show Less

Goldenwrench Supply Co - Corporate Logo
T#:641289
Part#: FXXCET-R
In Stock
$ 65.00 USD
Free Shipping
$ 65.00 USD
Free Shipping
Give the plain plastic factory coolant caps an upgrade with the brand new BLACKLINE Performance Coolant Expansion Tank Cap Cover from Goldenwrench. Each cap is CNC formed from T6 Aluminum and anodized in a limited release race inspired red color. All logos and decorations are finalized through a precision 3D milling process, machined into each cap for the ultimate premium finish. The BLACKLINE Performance Billet Coolant Expansion Tank Cap Cover will fit most BMW vehicles equipped with the N55, S55, S63, and S65 engine with the large coolant tank found in the following vehicles E90/E91/E92 M3 LCI, F22 M235i, F87 M2/M2 Competition, F80 M3, F82 M4, F10/F90 M5, and more (check your coolant cap ensuring that it is the same shape as seen in the product photos). Each kit comes with a Billet Coolant Expansion Tank Cap Cover, and an Installation Instruction Card. This is a not a full cap replacement. The Billet Cap Cover affixes to the top of your factory coolant cap installing easily in minutes.
Show More Show Less
Enthusiast Bundles - Corporate Logo
T#:37419774
Part#: 049453LA01-02KT6
Back Ordered
Sale - Save 46% $ 180.99

This product was last offered at the strikethrough price on
05-05-2026

$ 97.62 USD
Free Shipping on orders $49 and up
Sale - Save 46%
$ 180.99

This product was last offered at the strikethrough price on
05-05-2026

$ 97.62 USD
Free Shipping on orders $49 and up

Enthusiast Bundle: Turner Motorsport Crank Seal Guard with ECS Kevlar-Reinforced Belt

Protect your N5X/S55 from catastrophic failure with this must-have upgrade!

The Turner Motorsport Crank Seal Guard is meticulously designed to safeguard your engine’s crank seal from potential damage caused by a shredded serpentine belt. Oil or coolant leaks can lead to accessory belt slippage, fraying, and tearing, which can send belt debris behind the harmonic balancer and into the crank seal, risking serious engine damage.

Key Benefits:

Shields crank seal from accessory belt debris, preventing engine failure Custom-fit for N54/N55/S55 engines Zinc-coated fasteners for superior corrosion resistance Durable 6061 billet aluminum construction, with Turner blue anodized finish for added strength and style Cutting-Edge Design:

Designed using FARO laser scanning and Solidworks CAD for precision fitment Rigorous testing ensures reliable protection in all conditions Easily installs with 2 securing bolts torqued to 20Nm ECS Performance Kevlar-Reinforced Accessory Belt:

Reduced elongation for consistent performance over time Enhanced shock and impact resistance Superior oil and temperature resistance tested to JASO E 109-94 and SAE J2432 standards Ensure long-term engine health and peace of mind with the Turner Motorsport Crank Seal Guard and ECS Kevlar-Reinforced Accessory Belt combo. Prevent the "when, not if" risk of belt-related engine failure today!

Show More Show Less

Goldenwrench Supply Co - Corporate Logo
T#:5691134
Part#: FXXOCC-B
In Stock
$ 60.00 USD
Free Shipping
$ 60.00 USD
Free Shipping
Give the plain plastic factory oil cap unit an upgrade with the brand new BLACKLINE Performance Billet Oil Cap Cover. Each cap is CNC formed from T6 Aluminum and anodized in a limited release race inspired blue color. Featuring an all new Drip G logo, with the BLACKLINE insignia engraved in the cap handle with a reminder to fill the engine with Synthetic Oil Only. All logos and decorations are finalized through a precision 3D milling process, machined into each cap for the ultimate premium finish. The BLACKLINE Performance Billet Oil Cap Cover will fit most BMW vehicles equipped with the N55, S55, S63, and S65 with the round shaped oil cap found in a variety of vehicles(check your oil cap ensuring that it is the round shape as seen in the product photos). Each kit comes with a Billet Oil Cap Cover, and an Installation Instruction Card. This is a not a full cap replacement. The Billet Oil Cap Cover affixes to the top of your factory oil cap installing easily in minutes.
Show More Show Less

Goldenwrench Supply Co - Corporate Logo
T#:5691129
Part#: FXXCET-B
In Stock
$ 65.00 USD
Free Shipping
$ 65.00 USD
Free Shipping
Give the plain plastic factory coolant caps an upgrade with the brand new BLACKLINE Performance Coolant Expansion Tank Cap Cover from Goldenwrench. Each cap is CNC formed from T6 Aluminum and anodized in a limited release race inspired blue color. All logos and decorations are finalized through a precision 3D milling process, machined into each cap for the ultimate premium finish. The BLACKLINE Performance Billet Coolant Expansion Tank Cap Cover will fit most BMW vehicles equipped with the N55, S55, S63, and S65 engine with the large coolant tank found in a variety of M vehicles(check your coolant cap ensuring that it is the same shape as seen in the product photos). Each kit comes with a Billet Coolant Expansion Tank Cap Cover, and an Installation Instruction Card. This is a not a full cap replacement. The Billet Cap Cover affixes to the top of your factory coolant cap installing easily in minutes.
Show More Show Less

Goldenwrench Supply Co - Corporate Logo
T#:7244442
Part#: FXXOFH-R
Ships in 3 Business Days
$ 147.00 USD
Free Shipping
$ 147.00 USD
Free Shipping
OEM factory oil filter housing caps are made of plastic which can be prone to failure over time. Bring form, function and design to your engine with GoldenWrench's highly anticipated 2022 product release. Introducing the BLACKLINE Performance RED Billet Oil Filter Housing Cap which is designed to increase the functioning longevity and improve aesthetics over the factory plastic part while offering superior built in maintenance features.
Show More Show Less
Goldenwrench Supply Co - Corporate Logo
T#:3586293
Part#: FXXWFCR
In Stock
$ 47.00 USD
Free Shipping on orders $49 and up
Full replacement Billet Washer Fluid Cap for BMW F Series vehicles!
Goldenwrench Supply Co - Corporate Logo
T#:641268
Part#: FXXOCC
Ships in 5 Business Days
$ 60.00 USD
Free Shipping
$ 60.00 USD
Free Shipping
Give the plain plastic factory oil cap unit an upgrade with the brand new BLACKLINE Performance Billet Oil Cap Cover. Each cap is CNC formed from T6 Aluminum and anodized with an Anthracite Gray color to compliment the factory engine cover. Featuring an all new Drip G logo, with the BLACKLINE insignia engraved in the cap handle with a reminder to fill the engine with Synthetic Oil Only. All logos and decorations are finalized through a precision 3D milling process, machined into each cap for the ultimate premium finish. The BLACKLINE Performance Billet Oil Cap Cover will fit most BMW vehicles equipped with the N55, S55, S63, and S65 with the round shaped oil cap found in the following vehicles E90/E91/E92 M3 LCI, F22 M235i, F87 M2/M2 Competition, F80 M3, F82 M4, F10/F90 M5, and more (check your oil cap ensuring that it is the round shape as seen in the product photos). Each kit comes with a Billet Oil Cap Cover, and an Installation Instruction Card. This is a not a full cap replacement. The Billet Oil Cap Cover affixes to the top of your factory oil cap installing easily in minutes.
Show More Show Less


Goldenwrench Supply Co - Corporate Logo
T#:7355611
Part#: FXXWFC-B
In Stock
$ 47.00 USD
Free Shipping on orders $49 and up

BMW F30 Blackline Washer Fluid Cap Performance - Motorsport Blue

The BMW F30 Blackline Washer Fluid Cap Performance - Motorsport Blue offers a premium upgrade for BMW F Series vehicles. This high-quality billet washer fluid cap features a no-spill seal technology, addressing common issues with washer fluid leakage from the factory reservoir. Designed and manufactured with precision, this cap replaces the factory unit with a stylish and functional enhancement.

Benefits:

  • No-Spill Seal Technology: Prevents leakage from the factory washer fluid reservoir.
  • Premium Construction: CNC machined from T6 Aluminum for durability and strength.
  • Eye-Catching Design: Anodized in Motorsport Blue for a striking appearance.
  • Precision Finish: Logos and details are 3D milled for a refined look.
  • Easy Installation: Direct replacement for the factory cap, installs in minutes.
  • Wide Compatibility: Fits most BMW F Series models (check the application guide).
Show More Show Less
Bav Auto Tools - Corporate Logo
T#:580444
Part#: B8800139
Ships on Sep 30, 2026
Sale - Save 5% $ 203.99

This product was last offered at the strikethrough price on
05-03-2026

$ 193.79 USD
Free Shipping
Sale - Save 5%
$ 203.99

This product was last offered at the strikethrough price on
05-03-2026

$ 193.79 USD
Free Shipping
Used in removal and installation of the front crankshaft seal on BMW N55 engines, a common job that you can save yourself a ton of money doing at home.
Bav Auto Fuel Injector Removal/Installation Tool - N55
For E - Chassis N55
10X Entries Into Our F80 M3 Sweepstakes
Bav Auto Tools - Corporate Logo
T#:580388
Part#: B8800075
In Stock
Sale - Save 20% $ 109.99

This product was last offered at the strikethrough price on
05-03-2026

$ 87.99 USD
Free Shipping
Sale - Save 20%
$ 109.99

This product was last offered at the strikethrough price on
05-03-2026

$ 87.99 USD
Free Shipping
This tool takes the stress and difficulty out of removing and installing your N55 fuel injectors.

Bav Auto Timing Tool Kit - N51 N52 N54 N55 S55
10X Entries Into Our F80 M3 Sweepstakes
Bav Auto Tools - Corporate Logo
T#:580414
Part#: B8800107
Ships on Oct 20, 2026
Sale - Save 5% $ 371.99

This product was last offered at the strikethrough price on
05-03-2026

$ 353.39 USD
Free Shipping
Sale - Save 5%
$ 371.99

This product was last offered at the strikethrough price on
05-03-2026

$ 353.39 USD
Free Shipping
Sets cam, valve & VANOS timing on BMW N51, N52, N53, N54 & N55 engines. Includes camshaft fixture with hold-down bolts, 3 alignment gauges and TDC pin. A must when removing and replacing cylinder heads on these engines.
Show More Show Less

Goldenwrench Supply Co - Corporate Logo
T#:797049
Part#: FXXFCC
Ships in 5 Business Days
$ 47.00 USD
Free Shipping on orders $49 and up
$ 47.00 USD
Free Shipping on orders $49 and up
Give your gas cap a much-needed upgrade with the all new BMW M Car Series Billet Aluminum Fuel Cap Cover from Goldenwrench Supply Co. This performance Fuel Cap Cover Kit comes with a Billet Aluminum Fuel Cap Cover, and Installation Instructions. Please note this a cover that affixes on top of your factory fuel cap installing easily in minutes.
Show More Show Less
B58 Ignition Coil Upgrade Adapter Kit - N55/S55
Not forsale in the state of California!
Nexsys Motorsport - Corporate Logo
T#:6811828
Part#: ICU-NS55-N5-PL
Ships in 1-2 days
$ 299.99 USD
Free Shipping
$ 299.99 USD
Free Shipping
Does not include ignition coils. To mount the B58 coils onto the N55 & S55 engine the folks at Nexsys developed billet aluminum brackets that are Made in the USA.

Goldenwrench Supply Co - Corporate Logo
T#:6635763
Part#: FXXFCC-B
In Stock
$ 47.00 USD
Free Shipping on orders $49 and up
$ 47.00 USD
Free Shipping on orders $49 and up
Give your gas cap a much-needed upgrade with the all new BMW M Car Series Billet Aluminum Fuel Cap Cover from Goldenwrench Supply Co. This performance Fuel Cap Cover Kit comes with a Billet Aluminum Fuel Cap Cover, and Installation Instructions. Please note this a cover that affixes on top of your factory fuel cap installing easily in minutes.
Show More Show Less
OEM NGK Spark Plug Set - BMW F80/82/83 F87 S55 3.0L
We Price Match - Give Us A Call or Chat!
NGK - Corporate Logo
T#:589129
Part#: 12120039634KT4
In Stock
$ 113.99 USD
Free Shipping
$ 113.99 USD
Free Shipping
Poor idle, low fuel efficiency, and engine misfire codes are all symptoms of worn spark plugs. Replace yours with quality factory parts to get your engine running as well as possible. If you are replacing any aspect of your ignition system, it's best to replace all serviceable components. By doing so, your ignition system will work in better harmony, freeing up hidden horsepower and raising fuel economy. Skim the ECS Tuning ignition area under your model for spark plugs, wires, coil packs and more to get your vehicle into top shape.
Show More Show Less

Bav Auto Fuel Injector Installer / Remover - N20/N55
10X Entries Into Our F80 M3 Sweepstakes
Bav Auto Tools - Corporate Logo
T#:580389
Part#: B8800076
Ships on Oct 20, 2026
Sale - Save 10% $ 106.99

This product was last offered at the strikethrough price on
05-03-2026

$ 96.29 USD
Free Shipping
Sale - Save 10%
$ 106.99

This product was last offered at the strikethrough price on
05-03-2026

$ 96.29 USD
Free Shipping
This enables you to easily remove and install fuel injectors on BMW N20 and N55's produced from 2/2011 and up with direct injection.

Bav Auto Fuel Injector Seal Installer & Remover - N54/N63
10X Entries Into Our F80 M3 Sweepstakes
Bav Auto Tools - Corporate Logo
T#:580445
Part#: B8800140
In Stock
Sale - Save 3% $ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 118.33 USD
Free Shipping
Sale - Save 3%
$ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 118.33 USD
Free Shipping
This is has been specifically designed to remove and install the seals on your fuel injectors without damaging either the seals or injectors themselves.
Bav Auto Media Blaster Kit - BMW N20 N54 N55
10X Entries Into Our F80 M3 Sweepstakes
Bav Auto Tools - Corporate Logo
T#:582473
Part#: B1100008
In Stock
Sale - Save 8% $ 329.99

This product was last offered at the strikethrough price on
05-03-2026

$ 303.26 USD
Free Shipping
Sale - Save 8%
$ 329.99

This product was last offered at the strikethrough price on
05-03-2026

$ 303.26 USD
Free Shipping
Carbon building up in your intake ports? Take care of it quick and easy with this DIY media blaster kit from Bav auto. This walnut shell media blaster kit contains everything you need to effectively clean and de-carbon the intake ports and valves on your turbocharged N20, N54, or N55 BMW engine. Taking your vehicle to the dealer to have this service performed, you would be looking at a cost of around $1000 or more! This kit saves you money and can be used as many times as you need to ensure perfectly clean intake ports for optimum airflow and performance. Included in this kit: 20lb pressure feed media blaster including water separator and pressure gauge blasting wand N54/N55 port adapter (attaches to your shop vac to catch the used media and deposits) 25lb package of walnut shell blasting media Use of this kit requires a medium sized air compressor (suggested minimum 20-30 gallon tank, 4.0 CFM @ 90psi), common "shop vac" and full hearing and eye protection. We recommend the use of a remote starter switch. Please note: Intake manifold gasket set and Throttle body gasket, sold separately, must be replaced when removing intake manifold.
Show More Show Less
Goldenwrench Supply Co - Corporate Logo
T#:641288
Part#: FXXCET
In Stock
$ 65.00 USD
Free Shipping
$ 65.00 USD
Free Shipping
Give the plain plastic factory coolant caps an upgrade with the brand new BLACKLINE Performance Coolant Expansion Tank Cap Cover from Goldenwrench. Each cap is CNC formed from T6 Aluminum and anodized with an Anthracite Gray color to compliment the factory engine cover. All logos and decorations are finalized through a precision 3D milling process, machined into each cap for the ultimate premium finish. The BLACKLINE Performance Billet Coolant Expansion Tank Cap Cover will fit most BMW vehicles equipped with the N55, S55, S63, and S65 engine with the large coolant tank found in the following vehicles E90/E91/E92 M3 LCI, F22 M235i, F87 M2/M2 Competition, F80 M3, F82 M4, F10/F90 M5, and more (check your coolant cap ensuring that it is the same shape as seen in the product photos). Each kit comes with a Billet Coolant Expansion Tank Cap Cover, and an Installation Instruction Card. This is a not a full cap replacement. The Billet Cap Cover affixes to the top of your factory coolant cap installing easily in minutes.
Show More Show Less


Bav Auto Tools - Corporate Logo
T#:580412
Part#: B8800104
In Stock
Sale - Save 5% $ 147.99

This product was last offered at the strikethrough price on
05-03-2026

$ 140.59 USD
Free Shipping
Sale - Save 5%
$ 147.99

This product was last offered at the strikethrough price on
05-03-2026

$ 140.59 USD
Free Shipping
For removal and installation of the rear crankshaft seal on BMW N51, N52 and N54 engines.
Borescope Camera with Light For Phone
10X Entries Into Our F80 M3 Sweepstakes
Bav Auto Tools - Corporate Logo
T#:32450134
Part#: PHONEBORESCOPE
In Stock
Sale - Save 3% $ 58.99

This product was last offered at the strikethrough price on
05-03-2026

$ 57.22 USD
Free Shipping on orders $49 and up
Sale - Save 3%
$ 58.99

This product was last offered at the strikethrough price on
05-03-2026

$ 57.22 USD
Free Shipping on orders $49 and up

The Borescope Inspection Camera offers 1920P HD resolution, a flexible 7.9mm probe, and a 16.4ft semi-rigid cable, making it ideal for inspecting hard-to-reach areas. Easily connect to IOS and Android devices, and use the IP67 waterproof probe for various applications, including automotive, plumbing, and home inspections.


Key Features:

  • 1920P HD Resolution: Capture clear images and high-quality video at 1920x1440 resolution.
  • Easy Connection: Connect quickly to IOS 9.0+ and Android 7+ devices via the 'SUP-ANESOK' app.
  • Semi-Rigid Cable: 16.4ft cable offers a mix of flexibility and rigidity for precise inspections.
  • Waterproof Probe: IP67-rated, capable of operating underwater up to 3.28 feet for 1 hour.
  • Wide Applications: Suitable for automotive, plumbing, and home inspections, with adjustable brightness for low-light environments.


Includes:

  • Borescope Camera
  • Android Adapter
  • Lightning Port Adapter
  • USB Type-C Connector
  • 16.4 ft. Semi-Rigid Cable
  • Magnet
  • Hook
  • Mirror
  • Protective Cap
  • Manual


WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less
Bav Auto Tools - Corporate Logo
T#:580431
Part#: B8800124
Ships on Sep 30, 2026
Sale - Save 15% $ 178.99

This product was last offered at the strikethrough price on
05-03-2026

$ 152.14 USD
Free Shipping
Sale - Save 15%
$ 178.99

This product was last offered at the strikethrough price on
05-03-2026

$ 152.14 USD
Free Shipping
For installation and removal of pressure springs on intermediate levers of valve train. Ensures quick, easy and safe handling of these high force springs.

Bav Auto Oil Filter Housing Cap Removal Tool - 1/2" Drive
10X Entries Into Our F80 M3 Sweepstakes
Bav Auto Tools - Corporate Logo
T#:580338
Part#: B8800006
In Stock
Sale - Save 25% $ 33.99

This product was last offered at the strikethrough price on
05-03-2026

$ 25.49 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 33.99

This product was last offered at the strikethrough price on
05-03-2026

$ 25.49 USD
Free Shipping on orders $49 and up
Used to easily remove your oil filter housing cap without damaging it.

B58 Ignition Coil Upgrade Adapter Kit - N55
Not for sale in the state of California!
Nexsys Motorsport - Corporate Logo
T#:6811852
Part#: B58COILPNPN55
Ships in 1-2 days
Sale - Save 7% $ 515.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 479.93 USD
Free Shipping
Sale - Save 7%
$ 515.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 479.93 USD
Free Shipping
B58 coils are capable of producing 2.3x the energy output while providing a longer spark duration than the Precision Raceworks N55 coils.
Goldenwrench Supply Co - Corporate Logo
T#:4565848
Part#: FXXWFCG
Ships in 5 Business Days
$ 47.00 USD
Free Shipping on orders $49 and up
Full replacement Billet Washer Fluid Cap for BMW F Series vehicles!

Performance Tool - Corporate Logo
T#:1809130
Part#: W89409
Ships in 2 Business Days
$ 126.99 USD
Free Shipping
$ 126.99 USD
Free Shipping
For servicing overhead valve engine with cylinder head removed.
Performance Tool - Corporate Logo
T#:1809147
Part#: W5202
In Stock at Vendor
$ 21.99 USD
Free Shipping on orders $49 and up
Nitrile Butadiene Rubber

Walnut Shell Blast Media (18/40 Fine Grade) - 50 lbs
10X Entries Into Our F80 M3 Sweepstakes
Bav Auto Tools - Corporate Logo
T#:582690
Part#: B1100050
In Stock
Sale - Save 15% $ 91.99

This product was last offered at the strikethrough price on
05-03-2026

$ 78.19 USD
Sale - Save 15%
$ 91.99

This product was last offered at the strikethrough price on
05-03-2026

$ 78.19 USD
Used for carbon buildup removal during walnut shell blasting

Performance Tool - Corporate Logo
T#:2242223
Part#: W80573
Ships in 2 Business Days
$ 22.99 USD
Free Shipping on orders $49 and up
Use to install pistons on most passenger cars and truck engines
Performance Tool - Corporate Logo
T#:2242226
Part#: W80533
Ships in 2 Business Days
$ 20.25 USD
Free Shipping on orders $49 and up
Extended socket length reaches confined areas.
Goldenwrench Supply Co - Corporate Logo
T#:30364175
Part#: FXXOFH
Ships in 5 Business Days
$ 147.00 USD
Free Shipping on orders $49 and up
Replace your factory plastic oil filter housing cap, which is prone to failure over time, with the BLACKLINE Performance BMW F Series Billet Oil Filter Housing Cap. This upgrade enhances the form, function, and design of your engine bay. Designed to outlast and improve upon the stock plastic part, this cap also offers superior built-in maintenance features. Meticulously designed and manufactured in-house with a completely new form factor, the cap provides significant functional and design improvements over the original. Each cap is CNC-machined from T6 aluminum and finished with a hard anodized coating in our signature anthracite grey color. The precision post-3D milling process engraves all text decorations, ensuring a premium finish. The BLACKLINE Performance Billet Oil Filter Housing Cap is compatible with most BMW F series vehicles equipped with S55 and most N Series engines that use BMW Part 11427525334, including the OG M2, M2 Competition, M3, M4, and many others. Each kit includes a Billet Oil Filter Cap and an Installation Instruction Card. This is a plug-and-play full replacement unit. Upgrade your engine's performance and appearance with this essential enhancement.
Show More Show Less


Bav Auto Ratcheting Serpentine Belt Wrench Kit
10X Entries Into Our F80 M3 Sweepstakes
Bav Auto Tools - Corporate Logo
T#:580390
Part#: B8800077
In Stock
Sale - Save 10% $ 67.99

This product was last offered at the strikethrough price on
05-03-2026

$ 61.19 USD
Free Shipping on orders $49 and up
Sale - Save 10%
$ 67.99

This product was last offered at the strikethrough price on
05-03-2026

$ 61.19 USD
Free Shipping on orders $49 and up
Used to retract your serpentine belt tensioner. This kit includes 18mm, 5/8 in, 14mm, 13mm, 12mm, sockets and 3/8 in and 1/4 in drive adapters
Enthusiast Bundles - Corporate Logo
T#:25042534
Part#: 023741TMS04EBKT
In Stock
Sale - Save 14% $ 578.99

This product was last offered at the strikethrough price on
05-05-2026

$ 499.02 USD
Free Shipping on orders $49 and up
Sale - Save 14%
$ 578.99

This product was last offered at the strikethrough price on
05-05-2026

$ 499.02 USD
Free Shipping on orders $49 and up

Enhance the aesthetics and performance of your F30 BMW equipped with the N55 engine with the Turner N55 Gloss Carbon Fiber Engine Cover. CAD-designed in-house, this engine cover is tailored specifically for F30 335i models. Crafted from hand-laid 2x2 weave carbon fiber, it's available in both gloss and matte finishes. The meticulous design pays homage to previous BMW forced induction powerplants, exposing more of the engine on the cold side. The incorporation of an OEM BMW roundel ensures OE fit and finish.

Pairing a Turner engine cover with a Turner carbon fiber intake is recommended by ECS Tuning for maintaining an impressive appearance and enhancing the sound of your N55 engine bay.

  • CAD-designed for F30 BMWs with N55 engine
  • Hand-laid 2x2 weave carbon fiber
  • Available in gloss and matte finishes
  • Homage to previous BMW forced induction powerplants
  • OEM BMW roundel for OE fit and finish

Set of 6 Blue Performance Ignition Coils

Turner BMW ignition coils are engineered for performance and efficiency, addressing the key components of engine function - air, fuel, and spark. These modified ignition coils increase energy output, resulting in a faster, more efficient, and consistent burn for optimal fuel utilization. The Turner ignition coils feature a distinctive blue housing, adding both performance and aesthetic value to your engine.

Routine maintenance is crucial, and these ignition coils should be changed every 40,000 - 60,000 miles to ensure the health, performance, and efficiency of your engine. Choose Turner Ignition Coils to keep your engine running strong and healthy.

  • Increased performance
  • Direct fitment
  • Signature Turner Blue finish
Show More Show Less
NGK - Ignition Coil - N20 N52 N54 N55 S55 S54 N62 S62 M54
We Price Match - Give Us A Call or Chat!
NGK - Corporate Logo
T#:35289800
Part#: 12138616153
Ships in 2 Business Days
$ 59.99

This product was last offered at the strikethrough price on
05-07-2026

$ 58.99 USD
Free Shipping on orders $49 and up
$ 58.99 USD
Free Shipping on orders $49 and up

Autel - Corporate Logo
T#:2914116
Part#: AL329
Ships in 2 Business Days
$ 49.99 USD
Free Shipping on orders $49 and up
OBDII Code Reader

Performance Tool - Corporate Logo
T#:2242222
Part#: W80572
Ships in 2 Business Days
$ 21.99 USD
Free Shipping on orders $49 and up
Use to install pistons on most passenger cars and truck engines
Spark Plug SILZKBR8D8S - Priced Each
We Price Match - Give Us A Call or Chat!
NGK - Corporate Logo
T#:397550
Part#: 97506
In Stock
$ 18.98 USD
Free Shipping on orders $49 and up
NGK 97506 Plugs are Suitable for BMW N20, N54, N55, and S55 Engines These are OE replacements for the N20 and S55, While providing a colder spark range better suited to tuned N54 and N55 Models. Although these come pre-gapped to .030" we highly recommend double checking the plug gap upon receiving them and adjusting to your vehicle's individual needs. For the N54, these plugs are 2 Steps Colder, while for the N55 they are only 1 Step Colder.
Show More Show Less

Enthusiast Bundles - Corporate Logo
T#:26505018
Part#: 005989SCH01A03KT
In Stock
Sale - Save 15% $ 95.99

This product was last offered at the strikethrough price on
05-05-2026

$ 81.47 USD
Free Shipping
Sale - Save 15%
$ 95.99

This product was last offered at the strikethrough price on
05-05-2026

$ 81.47 USD
Free Shipping

COMBINATION WRENCH SET:

Quality combination wrenches are a must when doing any kind of automotive work.

Features:

  • A complete set from 8 to 19 mm 
  • Professional quality wrenches in full length feature open end on one end and 12 pt box on the other
  • Satin finish provides superior feel, slip resistant grip, easy cleanup and inhibits rust
  • Includes sturdy wrench holder for easy storage


SCRAPER, HOOK, AND PICK SET:


Some of the most popular uses are carbon cleaning/scraping, picking out o-rings, snap rings and clips. This kit features large and small picks, hooks and a 1" wide scraper. This 9pc set should be part of everyone's tool assortment.

Features:

  • 3" Blade MINI Awl, 90°, Hook, and Curve
  • 6" Blade Awl, 90°, Hook, and Curve
  • 6" x 1" wide scraper

Everything in this kit comes with LIFETIME REPLACEMENT.


WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less
Performance Tool - Corporate Logo
T#:641935
Part#: WLMW5203
In Stock
$ 19.99 USD
Free Shipping on orders $49 and up
Many uses around the garage and home

Enthusiast Bundles - Corporate Logo
T#:37419761
Part#: 043742LAEBKT
In Stock
Sale - Save 16% $ 2,378.96

This product was last offered at the strikethrough price on
05-05-2026

$ 1,999.04 USD
Sale - Save 16%
$ 2,378.96

This product was last offered at the strikethrough price on
05-05-2026

$ 1,999.04 USD

F87 M2 N55 Race-Inspired Catback Exhaust System

Ready to transform your N55-powered M2 into a track-inspired machine? The Turner Motorsport Catback Exhaust delivers a lightweight, high-flow design that enhances both power and exhaust tone. Unleash a bold, aggressive sound that matches the intensity of your M2, revealing the full sonic and performance potential of the twin-scroll turbo N55 engine.

BMW enthusiasts know the thrill of owning an M2 with the N55, but the stock exhaust system can mute its character, especially as it warms up. The Turner Catback exhaust brings this engine to life with unrestricted flow and minimized weight, making every throttle response feel sharper, and every acceleration, thrilling. Perfect for the driver who wants the raw, unfiltered power of the N55 without the cost premium of the M2 Competition model.

Engineered for Power and Flow

Turner’s engineers crafted this catback exhaust to minimize weight and maximize airflow, using a true 3.0-inch stainless steel front section and straight-through rear piping. By removing factory restrictions, they’ve created an exhaust system that significantly improves performance, reduces back pressure, and delivers a sport-tuned sound that’s equally exhilarating on the track and the road. Weighing just 28 lbs, it offers a significant 27 lb reduction over the OEM exhaust, amplifying your M2's agility and responsiveness.

Sound Optimization: The N55 comes alive with this race-inspired exhaust, delivering a fierce tone that announces your arrival. Explore sound clips on the ECS Tuning YouTube Channel. High-Quality Materials: Constructed from T304 stainless steel, this exhaust is TIG-welded for enhanced durability, while the slip joints and precision mandrel bends ensure an exact fitment. Performance-Built: The quad 4.0-inch brushed exhaust tips complete the aggressive look while helping to enhance airflow, resulting in improved horsepower and torque. Features and Benefits

Motorsports-inspired exhaust tone 27 lb weight reduction for enhanced performance Free-flow design reduces back pressure for optimal torque and power gains Quad exit tips with a striking brushed finish Straightforward bolt-on installation with OEM mounting points Kit Includes

3.0" front section, direct fit to factory downpipe Lightweight midsection for better flow and sound "Race Inspired" rear exhaust section Quad 4.0" brushed exhaust tips Necessary clamps and hardware for seamless installation Optional Exhaust Pipe Hanger Removal Pliers Turner Motorsport Performance Ignition Coils

For top-tier spark and efficiency, the Turner Performance Ignition Coils deliver! Boosting energy output, these ignition coils provide a consistent, efficient spark, maximizing fuel burn and optimizing performance. Engineered with Turner’s signature blue housing, they look as good as they perform.

Features and Benefits

Enhanced ignition performance Perfect fitment for N55 engines Signature Turner Blue finish for a distinctive engine bay upgrade

Show More Show Less

Performance Tool - Corporate Logo
T#:1855998
Part#: W80535
In Stock
$ 1.99

This product was last offered at the strikethrough price on
08-26-2026

$ 1.54 USD
Free Shipping on orders $49 and up
$ 1.54 USD
Free Shipping on orders $49 and up
Easy to read markings to set gaps quickly and easily.
Performance Tool - Corporate Logo
T#:1855974
Part#: W942
Ships on Oct 16, 2026
$ 8.99 USD
Free Shipping on orders $49 and up
Includes straight, angled and combination picks
Performance Tool - Corporate Logo
T#:1809154
Part#: W5368
In Stock
$ 13.68 USD
Free Shipping on orders $49 and up
A must for any toolbox.


Performance Tool - Corporate Logo
T#:1809133
Part#: W80575
Ships in 2 Business Days
$ 17.62 USD
Free Shipping on orders $49 and up
Comfortable vinyl grip handles.
Autel - Corporate Logo
T#:2914136
Part#: MSULTRA
Ships in 7 Business Days
$ 12,306.99 USD
Free Shipping on orders $49 and up
The MaxiSys Ultra is Autel’s most ambitious diagnostics tablet designed to maximize technician intelligence.