BMW Exhaust Parts, Mufflers & Catalytic Converters for BMW F87 M2 N55 3.0L

Performance Catback Exhaust for pure unrestricted power and sound. This exhaust takes out all of the stop gates and pairs with the N55 for an iconic driving experience.

Take your N55 to the next level and show the S55 drivers who is boss with our Turner Race-Inspired Catback. This light weight and free flowing exhaust boasts a smooth, clean, and rowdy exhaust note. Although the N55 found in the F chassis of BMW features a loud "cold start" once the car is warmed up the exhaust lacks character and volume. The twin scroll turbo featured on your M2 does a great job of limiting the volume on the factory exhaust but we want to hear the exhaust! No more boring and subtle exhaust, in comes our Turner catback to drop weight, get rid of restrictions and release the full engine and turbo sounds!

When you are shopping for an F87 M2 you have two options to choose from. Your choice can be the standard M2 with the N55 engine or the M2 Competition that comes equipped with the S55. The best part about either the competition or non-comp M2 is you are still getting the "M" suspension, characteristics and drive. From our experience there is not a big trade off between the two models that can justify the price difference. With the N55 you get a lighter weight and extremely capable weapon. Paired with an intake, tune, and the our lightweight exhaust the M2 is not a car to be messed with.

We set out to amplify the N55 M2 with a proper catback exhaust system. To accomplish this goal, our engineers increased flow, reduced your exhaust weight to a total of 28lbs, and delivered an exhaust system that captures the full unrestricted sound of the sonorous twin scroll turbo inline-6 N55 engine. The increase in flow is gained from true 3.0" 304 stainless steel front section that feeds into the straight-through free flowing rear section. We specifically designed this catback with flow in mind to ensure the exhaust would never be a restriction. Weight reduction is achieved by replacing the factory mufflers and resonators with straight through lightweight stainless for the most weight advantage possible. The best part of the race inspired catback is the capability to perform far beyond the point that the factory exhaust.

Sound clips featured on the ECS Tuning YouTube Channel: - CLICK HERE -

Part Design:

Turner In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment.
T304 Stainless Material in a natural finish - 1.25mm wall thickness, back purged and TIG-welded throughout
3.0" combined with dual 2.5"OD Stainless Steel Mandrel Bent Tubing
T304 Stainless Steel 12mm barbed exhaust hangers Tig-Welded in OE locations for precise fitment.​
28lb total weight for full catback exhaust
Strategically placed slip joints provide the most adjustability to obtain perfect fitment
Features and Benefits:

True Motorsport inspiration
Weight reduction
Free flowing (unlimited flow)
Reduction in back pressure for increased torque and horsepower
Quad exit tips
Kit Contents:

3.0" front exhaust section (direct fitment to the factory downpipe flange)
Light weight free-flowing middle muffler sections for better sound, performance and weight savings.
Straight through "Race inspired" rear section
Optional Turner Exhaust tips - 2.5" Inlet, 4.0" Outlet
Clamps and Hardware for an OEM+ install
Optional Exhaust Pipe Hanger Removal Pliers
Product Development:

Our F87 Race Inspired Catback was designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing.

Prepare yourself for an entirely new experience with your M2. Our performance cat-back features a fully upgraded system from the downpipe all the way to the rear diffuser for a total transformation in performance and sound. With the improved throttle response and free-flowing upgrade your car will feel like a new type of animal on the road and track.

Why choose the Turner Cat-Back exhaust for your M2? It’s more than just a bolt-on upgrade; it’s a performance upgrade designed for an easy and gratifying installation. Crafted from lightweight 3.0" stainless steel, the front pipe connects directly to your factory or aftermarket downpipe using a factory flange and v-band style clamp. This front pipe smoothly transitions into a 'Y mid-pipe,' splitting into twin 2.5" exhaust pipes. This configuration not only enhances airflow but also delivers a distinctive exhaust note, setting your N55 engine apart with individual style.

The highlight of our exhaust system is undoubtedly the muffler, inspired by the M2 Competition. Featuring equal 2.5" inlets, this muffler gives your M2 balanced performance and aesthetics with its quad-tipped design. What sets it apart even more is its dual-valve actuator feature. The kit includes a second valve actuator and dual wiring harness, allowing seamless integration with your factory valve control system with no additional wiring necessary.

Experience individual-styled sound and performance with your new Turner Cat-Back exhaust, engineered to elevate your driving experience with every rev.

N55 vs S55:
When shopping for an F87 M2 you have two options to choose from. Either you choose the standard M2 with the N55 engine or the M2 Competition that comes equipped with the S55. The best part about either the competition or non-comp M2 is you are still getting the "M" suspension, drivetrain, and experience. From our experience, there is not a big trade-off between the two models that can justify the price difference. With the N55 you get a lighter weight and extremely capable weapon. Paired with an intake, tune, and the Turner lightweight exhaust the M2 is not a car to be messed with.

Features:

Street/Motorsport inspiration
Enhanced exhaust note
Full exhaust replacement
M2 inspired dual Valved Muffler
Reduction in back pressure for increased torque and horsepower
Quad exit tips
Part Design:

Turner In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment.
T304 Stainless Material in a natural finish - 1.25mm wall thickness, back purged and TIG-welded throughout
3.0" combined with dual 2.5"OD Stainless Steel Mandrel Bent Tubing
T304 Stainless Steel 12mm barbed exhaust hangers Tig-Welded in OE locations for precise fitment.​
Strategically placed slip joints provide the most adjustability to obtain perfect fitment
Kit Contents:

3.0" front exhaust section (direct fitment to the factory downpipe flange)
Lightweight free-flowing middle muffler sections for better sound, performance, and weight savings.
M2 Competition style dual valve muffler
Secondary exhaust valve actuator
Dual valve controller harness
Optional Turner Exhaust tips:
2.5" Inlet, 4.0" Outlet
2.5" Inlet, 3.5" Outlet
Clamps and Hardware for an OEM+ install
Optional Exhaust Pipe Hanger Removal Pliers
Optional OBD Plug-In:

Unlike the S55 and S58 equipped cars, non-M, and the N55 equipped cars do not have a strict open and closed valve option. The factory-valved muffler's operation varies with driving modes (comfort, sport, sport plus) and RPM, determining whether valves are open or closed. For precise control over exhaust valve positioning, consider adding a Bluetooth-enabled OBD plug-in for smartphone control. During testing, use an OBD-linked app(MHD) to select the optimal valve position based on your sound preference. This kit offers optional OBD extensions for diagnostics and the ability to adjust vehicle widgets, such as valve position on your valved muffler.

Product Development:

Our F87 M2 Valved Cat-back was designed, engineered, tested, and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.

Upgrade your exhaust system with the 2.5" Stainless Steel 3-Bolt Flange - Priced Each. This high-quality flange is designed to provide a durable and reliable connection for your exhaust components. Made from stainless steel, it offers corrosion resistance and longevity, ensuring a lasting performance. Whether you're repairing or customizing your exhaust system, this flange is an essential component for a secure fit.

• Durable stainless steel construction
• Corrosion-resistant for long-lasting performance
• Provides a reliable connection for exhaust components
• Suitable for repair or customization of exhaust systems

Achieving precise exhaust fitment can be tricky—especially when the exhaust hanger has room to slide. This movement can cause annoying rattles or even lead to contact with the underbody or rear bumper. The ECS Tuning Exhaust Locking Collar offers a simple and effective fix. Designed to clamp securely around the exhaust hanger, this collar keeps everything firmly in place, eliminating unwanted movement.

Crafted from high-strength 6031 billet aluminum and finished in a sleek black anodized coating, it delivers both durability and corrosion resistance. With this collar in place, your exhaust stays exactly where it should—no rattles, no surprises.

Product Design:

Made from precision machined 6061 aluminum Black anodized finish Stainless steel M5 X 0.8mm hardware Installation & Support:

Install the locking collar around your exhaust hanger, position the hanger in place, and snug the locking collar down in place against the hanger! ECS Exhaust Hanger Locking Collars are available for 10mm and 12mm exhaust hangers. Please measure your hangers before ordering. The 10mm locking collar can be found HERE.

Achieving precise exhaust fitment can be tricky—especially when the exhaust hanger has room to slide. This movement can cause annoying rattles or even lead to contact with the underbody or rear bumper. The ECS Tuning Exhaust Locking Collar offers a simple and effective fix. Designed to clamp securely around the exhaust hanger, this collar keeps everything firmly in place, eliminating unwanted movement.

Crafted from high-strength 6031 billet aluminum and finished in a sleek black anodized coating, it delivers both durability and corrosion resistance. With this collar in place, your exhaust stays exactly where it should—no rattles, no surprises.

Product Design:

Made from precision machined 6061 aluminum Black anodized finish Stainless steel M5 X 0.8mm hardware Installation & Support:

Install the locking collar around your exhaust hanger, position the hanger in place, and snug the locking collar down in place against the hanger! ECS Exhaust Hanger Locking Collars are available for 10mm and 12mm exhaust hangers. Please measure your hangers before ordering. The 12mm locking collar can be found HERE.

Enhance your BMW's hose connections with this sleek and reliable smooth clamp. Crafted specifically for BMW models, this clamp ensures secure and leak-free connections for hoses. Experience improved durability and functionality in your BMW's system with this purpose-built smooth clamp.

Key Benefits:

• Secure and leak-free hose connections
• Designed specifically for BMW models
• Enhanced durability for long-term use

Turner Motorsport Rolled Angle Exhaust Tip - 3.0 Inlet - 3.0 OD - Stepped Left - Chrome brings a sleek and stylish upgrade to BMW exhaust systems. This high-quality exhaust tip features a striking chrome finish and a rolled angle, stepped design that adds both aesthetics and performance to your vehicle. Its precision design ensures a perfect fit and a bold look. With a 3.0-inch inlet and 3.0-inch outer diameter, this exhaust tip is designed to enhance the visual appeal of your BMW's exhaust system.

• Premium Chrome Finish: Adds a high-gloss, polished look to your vehicle’s exhaust.
• Rolled Angle Design: Provides a stylish and aggressive appearance.
• Stepped Left Design: Ensures a precise fit and a distinctive look.
• 3.0-Inch Inlet & Outer Diameter: Perfectly matches BMW exhaust systems for a seamless upgrade.
• Durable Construction: Built to withstand the elements and maintain its shine.

We are proud to introduce our latest exhaust offering, the Black Chrome Rolled Angle Exhaust Tip! This tip comes in a gorgeous chrome finish and features a rolled angle, stepped design. Warning - you may become obsessed with cleaning and taking care of these beautiful tips!

Other Features Include:

3.0 Inlet
3.0 Outer Diameter
Black chrome Finish
Left Stepped Design
Rolled Angle Design

Set of 2 universal 2.5" inlet to 3.5" outlet exhaust tips.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Black Chrome
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

3.0" Inner Diameter
4.0" Outer Diameter
Black Chrome Finish
Double Wall Construction
Straight Cut Style
Includes Stainless Steel Clamp