BMW Exhaust Parts, Mufflers & Catalytic Converters for BMW F87 M2 N55 3.0L

Enhance your BMW's exhaust system with the Rogue Engineering M2 exhaust (for N55 engines).

Engineered to deliver a great sound without unpleasant drone, this exhaust system offers easy installation and removal, ensuring a hassle-free upgrade experience.

• Muffler-only replacement designed for 2016-18 N55 equipped M2s
• Constructed from full T-304 stainless steel for durability
• Clamps to factory exhaust pipe using factory-style clamp for easy installation
• Compatible with factory or aftermarket rear valances for customization
• Features quad 89mm, single-wall tips with adjustable position
• Virtually zero drone for a comfortable driving experience
• Compatible with stock, catted, or catless downpipes and ECU tunes
• Works with air intakes without voiding BMW factory warranty
• Does not have vacuum-controlled valve for simplified operation

The oxygen sensor is part of your BMW's emissions control system and feeds data to BMW engine management computer. The oxygen sensor is positioned in the exhaust pipe and can detect rich and lean mixtures. The goal of the oxygen sensor is to help the engine run as efficiently as possible and also to produce as few emissions as possible. When your BMW oxygen sensor fails, the computer can no longer sense the air/fuel ratio, so it ends up guessing -- resulting in poor performance, poor gas mileage, and increased pollution. Make sure your BMW engine performs as it should, and doesn't use more fuel than it needs to, by simply changing your oxygen sensor today.

Genuine BMW Regulating Lambda Probe - L= 740Mm

This item fits the following BMW Chassis:
E82,E90,E92,E93,F30,F34

Fits BMW Engines including:
N55 - Up to 08/2013

For secure exhaust connections, choose the 2.25" (57mm) Exhaust Clamp.

Engineered for durability and reliability, this clamp ensures a tight seal for your exhaust system components. Its high-quality construction and corrosion-resistant finish provide long-lasting performance, even in harsh conditions. With easy installation and a precise fit, this exhaust clamp is a must-have for any vehicle owner.

• Ensures a tight seal for exhaust system components
• High-quality construction for durability
• Corrosion-resistant finish for long-lasting performance
• Easy installation for convenience
• Precise fit for secure connections

Aggressive Sound:
A free-flowing, transverse muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. The muffler is finished with a high-temp powder-coated black finish and a stamped aFe power logo.

Exhaust Valve:
This down-pipe back exhaust system incorporates a factory style exhaust valve which uses the factory exhaust valve motor (not included). The valve helps regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position for maximum performance.

Simple Installation:
This MACH Force-Xp axle-back exhaust system uses factory mounting locations providing stability and a hassle-free installation.

Quad 4" Polished Tips 
Finishing off this system are quad 4" diameter, polished, 304 stainless steel tips. The tips come with a laser-etched aFe power logo for an aggressive style.

Leak-Free Seal:
High quality band clamps are used for a complete 360 degree sealing surface.

Brushed 304 SS Construction:
The performance axle-back exhaust system is constructed of 3" to 2-1/2" mandrel-bent, brushed 304 stainless steel tubing for maximum performance, corrosion resistance and strength eliminating cracking.

DETAILS:

• Constructed from 100% hand TIG-welded, 3" to 2-1/2" mandrel bent, brushed finished 304 stainless steel tubing
• Includes a factory style exhaust valve
• Utilizes a unique high flow, transverse muffler with a high-temp powder-coated black finish
• Includes quad 4" diameter, polished 304 stainless steel tips
• Uses all factory hanger locations for a hassle-free installation

Aggressive Sound:
A free-flowing, transverse muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. The muffler is finished with a high-temp powder-coated black finish and a stamped aFe power logo.

Exhaust Valve:
This down-pipe back exhaust system incorporates a factory style exhaust valve which uses the factory exhaust valve motor (not included). The valve helps regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position for maximum performance.

Simple Installation:
This MACH Force-Xp axle-back exhaust system uses factory mounting locations providing stability and a hassle-free installation.

Quad 4" Gloss Black Tips 
Finishing off this system are quad 4" diameter, gloss black, 304 stainless steel tips. The tips come with a laser-etched aFe power logo for an aggressive style.

Leak-Free Seal:
High quality band clamps are used for a complete 360 degree sealing surface.

Brushed 304 SS Construction:
The performance axle-back exhaust system is constructed of 3" to 2-1/2" mandrel-bent, brushed 304 stainless steel tubing for maximum performance, corrosion resistance and strength eliminating cracking.

DETAILS:

• Constructed from 100% hand TIG-welded, 3" to 2-1/2" mandrel bent, brushed finished 304 stainless steel tubing
• Includes a factory style exhaust valve
• Utilizes a unique high flow, transverse muffler with a high-temp powder-coated black finish
• Includes quad 4" diameter, gloss black, 304 stainless steel tips
• Uses all factory hanger locations for a hassle-free installation

Universal 2.5" inlet to 3.5" outlet exhaust tip. Priced per exhaust tip.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Brushed Aluminum Finish
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

Universal 2.5" inlet to 3.5" outlet exhaust tip. Priced per exhaust tip.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Brushed Aluminum Finish
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

Universal 2.5" inlet to 3.5" outlet exhaust tip. Priced per exhaust tip.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Mirror Chrome Finish
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

Set of 4 universal 2.5" inlet to 3.5" outlet exhaust tips.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Black Chrome
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp