BMW Intake Parts for BMW F87 M2 N55 3.0L

Engines make more power when you're able to move as much air and fuel as possible through them. However, air density is just as important as air volume. Cooler air is denser air, so in addition to keeping your engine cool, it's important to make sure that your intake charge is as cool as possible. Turner Motorsport's upgraded intercooler works to reduce air temperatures with a bare minimum of pressure drop. Less pressure drop means less restriction, and a turbocharger that doesn't have to work as hard. This results not only in a longer service life for your turbocharger, but a substantial increase in performance as well.

The stepped design increases volume and surface are in a limited space by adding an additional smaller core at the top of the intercooler. Both cross sectional area and frontal surface area are increased by a whopping 56%, with a design that still weighs under 20 pounds. On the stock intercooler, the temperature differential between the inlet and outlet sides of the intercooler represented a 95 degree drop. With the Turner Motorsport intercooler, that drop was increased to a chilling 140 degrees. The dyno results don't lie: as a bolt-in upgrade, expect gains of 18 wheel horsepower and 10 lb/ft of torque. With a tune and supporting modifications, further gains are possible, up to 36 horsepower and 28 lb/ft of torque.

This cast aluminum intercooler features an attractive, easy to clean matte black finish, with etched Turner logos on the front and bottom. If you're looking for the ultimate cooling system upgrade for your turbo BMW, look no further.

• Cast aluminum construction
• Bar and plate design
• 56% increase in frontal surface area & cross sectional area
• Decrease in temperature of 45 degrees from inlet side to outlet side (95 degree drop stock on outlet side vs. 140 degree drop on Turner outlet side)
• Significantly less restriction (pressure drop of consistently 0.75 psi vs. 1.5-2.5 psi stock)
• +18HP/10TQ (+36HP/28TQ with tune and supporting mods)
• Weighs under 20 lbs.
• Overall size: 520mm wide, 210mm tall
• Mounting hardware inlcuded

Upgrade to the following OE Intercoolers: 17517600531, 17517600530, 17517618809

Fits the Following BMWs:

F22 F23 228i 228i M235i M235ix

F30 F31 F32 F33 F34 F36 328i 328ix 335i 335ix 428i 428ix 435i 435ix

Unleash the true potential of your N55-powered F87 M2 with the Turner Race-Inspired Catback Exhaust. Showcasing a lightweight and free-flowing design, this exhaust delivers a clean, rowdy exhaust note that transforms your driving experience. Say goodbye to the lackluster factory sound, as the Turner catback drops weight, eliminates restrictions, and amplifies the full engine and turbo sounds.

Whether you opt for the standard M2 or the Competition model, the Turner catback enhances the "M" experience. Paired with an intake and tune, the N55 M2 becomes a formidable force on the road. Turner's engineers focused on increasing flow and reducing weight, achieving a total exhaust weight reduction of 28lbs. The catback features a true 3.0" 304 stainless steel front section and straight-through rear section, ensuring unrestricted sound and optimal performance. Experience Motorsport inspiration with a 27lb weight reduction, unlimited flow, and enhanced torque and horsepower.

Kit Contents:

• 3.0" front exhaust section (direct fitment to the factory downpipe flange)
• Lightweight free-flowing middle muffler sections for better sound, performance and weight savings.
• Straight through "Race inspired" rear section
• Turner Exhaust tips - 2.5" Inlet, 4.0" Outlet
• Clamps and Hardware for an OEM+ install

Elevate your N55 M2's performance and sound with the Turner Race-Inspired Catback Exhaust.